Bug#480995: smbfs: Fails to mount.cifs etch samba server in 2.6.25
Hello, same problem here. I tried the Fedora patch from https://bugzilla.redhat.com/show_bug.cgi?id=443681 and it works. I can mount shares exported from the Samba version in etch, the version in lenny and Windows XP. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#482651: linux-image-2.6.24-1-amd64: Update from 2.6.24-6 to 2.6.24-7 failed to execute lilo causing boot loop
Package: linux-image-2.6.24-1-amd64 Version: 2.6.24-7 Severity: normal Updating the system from 2.6.24-6 to 2.6.24-7 rendered the system unuseable. After the reboot lilo started but was not able to load the kernel, the system rebooted, entering an infinite boot loop. The update had been done with synaptic. Fix: Booting from the install CD into the rescue mode, mounting the root partition and the boot partition (root and boot live in different partitions here) and issuing the command lilo allowed the system to boot normal again. Afterwards I remembered that I had seen no lilo command in synaptics terminal window. Previous kernel updates within the 2.6.24 kernel series had not shown this defect. -- Package-specific info: ** Version: Linux version 2.6.24-1-amd64 (Debian 2.6.24-7) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Sat May 10 09:28:10 UTC 2008 ** Command line: auto BOOT_IMAGE=Linux ro root=803 ** Tainted: P (1) ** Kernel log: skge 1.13 addr 0xfdef8000 irq 19 chip Yukon-Lite rev 9 skge eth0: addr 00:30:1b:42:98:ad ata_piix :00:1f.2: version 2.12 ata_piix :00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt :00:1f.2[B] - GSI 19 (level, low) - IRQ 19 PCI: Setting latency timer of device :00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19 ata2: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered ata1.00: ATA-7: ST3400833NS, 3.AEH, max UDMA/133 ata1.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3400833NS 3.AE PQ: 0 ANSI: 5 ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot :00:1f.1 ACPI: PCI Interrupt :00:1f.1[A] - GSI 18 (level, low) - IRQ 18 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:pio ICH7: IDE port disabled Probing IDE interface ide0... Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk firewire_core: created new fw device fw0 (0 config rom retries, S400) hda: _NEC DVD_RW ND-4571A, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input2 pnp: the driver 'parport_pc' has been registered parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) parport_pc 00:07: driver attached input: Power Button (FF) as /class/input/input3 intel_rng: FWH not detected ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: PCI Interrupt :00:1f.3[B] - GSI 19 (level, low) - IRQ 19 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt :00:1b.0[A] - GSI 16 (level, low) - IRQ 16 PCI: Setting latency timer of device :00:1b.0 to 64 hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... input: ImExPS/2 Generic Explorer Mouse as /class/input/input5 Adding 2931852k swap on /dev/sda2. Priority:-1 extents:1 across:2931852k EXT3 FS on sda3, internal journal loop: module loaded nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt :01:00.0[A] - GSI 16 (level, low) - IRQ 16 PCI: Setting latency timer of device :01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 fuse init (API version 7.9) kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. skge eth0: enabling interface IA-32 Microcode Update Driver: v1.14a
Processed: your mail
Processing commands for [EMAIL PROTECTED]: reassign 477201 linux-2.6 2.6.24-1,2.6.25-2,2.6.25-3 Bug#477201: laptop doesn't boot if on battery power, raises error with kacpi_notify Bug reassigned from package `linux-2.6' to `linux-2.6'. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#478765: BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1389]
maximilian attems a écrit : On Wed, 30 Apr 2008, Fabrice Lorrain wrote: Package: linux-image-2.6.24-1-686 Version: 2.6.24-6 Severity: normal Hello, I observe from time to time the following at cold or warm reboot on a mac-mini (core 2 duo, cf. http://www.apple.com/macmini/specs.html). I don't think the trouble is with the hardware (same box working fine with OSX and Xubuntu-hardy in live mode) can you reproduce with 2.6.25 from unstable? installs just fine in testing please report back, thanks Hello Maximilian, This bug can be closed, I wasn't able to reproduce the crash since my uppgrade to 2.6.25, a couple of weeks ago. Thanks. @+, Fab -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: [bts-link] source package linux-2.6
Processing commands for [EMAIL PROTECTED]: # # bts-link upstream status pull for source package linux-2.6 # see http://lists.debian.org/debian-devel-announce/2006/05/msg1.html # user [EMAIL PROTECTED] Setting user to [EMAIL PROTECTED] (was [EMAIL PROTECTED]). # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW Bug#477409: linux-image-2.6.24-1-686: Sound stopped working with new kernel There were no usertags set. Usertags are now: status-NEW. # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW Bug#477409: linux-image-2.6.24-1-686: Sound stopped working with new kernel Usertags were: status-NEW. Usertags are now: status-NEW. # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW Bug#477409: linux-image-2.6.24-1-686: Sound stopped working with new kernel Usertags were: status-NEW. Usertags are now: status-NEW. # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW Bug#477409: linux-image-2.6.24-1-686: Sound stopped working with new kernel Usertags were: status-NEW. Usertags are now: status-NEW. # remote status report for #475561 # * http://bugzilla.kernel.org/show_bug.cgi?id=10723 # * remote status changed: (?) - NEW usertags 475561 + status-NEW Bug#475561: linux-image-2.6.24-1-486 fails to mount ext3 rootfs on FUJITSU MHK2060AT, ATA DISK drive There were no usertags set. Usertags are now: status-NEW. # remote status report for #475852 # * http://bugzilla.kernel.org/show_bug.cgi?id=10721 # * remote status changed: (?) - NEW usertags 475852 + status-NEW Bug#475852: xserver-xorg-input-synaptics: Synaptics touchpad completely stops working under gdm, xdm, kdm ... and X (gnome, openbox, kde...) There were no usertags set. Usertags are now: status-NEW. # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW Bug#477409: linux-image-2.6.24-1-686: Sound stopped working with new kernel Usertags were: status-NEW. Usertags are now: status-NEW. # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW Bug#477409: linux-image-2.6.24-1-686: Sound stopped working with new kernel Usertags were: status-NEW. Usertags are now: status-NEW. # remote status report for #479709 # * http://bugzilla.kernel.org/show_bug.cgi?id=10729 # * remote status changed: (?) - NEW usertags 479709 + status-NEW Bug#479709: linux-image-2.6.25-1-amd64: Kernel 2.6.25 freezes after several hours of uptime. System runs fine with .24 There were no usertags set. Usertags are now: status-NEW. # remote status report for #481419 # * http://bugzilla.kernel.org/show_bug.cgi?id=10727 # * remote status changed: (?) - NEW usertags 481419 + status-NEW Bug#481419: linux-image-2.6.25-2-686: zd12rw with new mac80211 does not work with Yakumo QuickWLAN USB (ZyDAS) There were no usertags set. Usertags are now: status-NEW. # remote status report for #482387 # * http://bugzilla.kernel.org/show_bug.cgi?id=10593 # * remote status changed: (?) - RESOLVED # * remote resolution changed: (?) - PATCH-ALREADY-AVAILABLE # * closed upstream tags 482387 + fixed-upstream Bug#482387: iwl3945: please include the monitor mode patch. Tags were: patch Tags added: fixed-upstream usertags 482387 + status-RESOLVED resolution-PATCH-ALREADY-AVAILABLE Bug#482387: iwl3945: please include the monitor mode patch. There were no usertags set. Usertags are now: status-RESOLVED resolution-PATCH-ALREADY-AVAILABLE. thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: Re: Bug#482675: Kernel oops on amd64 quad core 9850
Processing commands for [EMAIL PROTECTED]: reassign 482675 linux-2.6 2.6.24-6 Bug#482675: Kernel oops on amd64 quad core 9850 Bug reassigned from package `installation-reports' to `linux-2.6'. thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[bts-link] source package linux-2.6
# # bts-link upstream status pull for source package linux-2.6 # see http://lists.debian.org/debian-devel-announce/2006/05/msg1.html # user [EMAIL PROTECTED] # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW # remote status report for #475561 # * http://bugzilla.kernel.org/show_bug.cgi?id=10723 # * remote status changed: (?) - NEW usertags 475561 + status-NEW # remote status report for #475852 # * http://bugzilla.kernel.org/show_bug.cgi?id=10721 # * remote status changed: (?) - NEW usertags 475852 + status-NEW # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW # remote status report for #477409 # * http://bugzilla.kernel.org/show_bug.cgi?id=10750 # * remote status changed: (?) - NEW usertags 477409 + status-NEW # remote status report for #479709 # * http://bugzilla.kernel.org/show_bug.cgi?id=10729 # * remote status changed: (?) - NEW usertags 479709 + status-NEW # remote status report for #481419 # * http://bugzilla.kernel.org/show_bug.cgi?id=10727 # * remote status changed: (?) - NEW usertags 481419 + status-NEW # remote status report for #482387 # * http://bugzilla.kernel.org/show_bug.cgi?id=10593 # * remote status changed: (?) - RESOLVED # * remote resolution changed: (?) - PATCH-ALREADY-AVAILABLE # * closed upstream tags 482387 + fixed-upstream usertags 482387 + status-RESOLVED resolution-PATCH-ALREADY-AVAILABLE thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#482694: linux-image-2.6-amd64: debian/copyright is wrong
Package: linux-image-2.6-amd64 Version: 2.6.25+14 Severity: serious Justification: wrong debian/copyright It's a well known fact that the kernel is mostly GPLv2 only, and /usr/share/doc/linux-image-2.6-amd64/copyright reads: This package is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- ·O· Pierre Habouzit ··O[EMAIL PROTECTED] OOOhttp://www.madism.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#482694: marked as done (linux-image-2.6-amd64: debian/copyright is wrong)
Your message dated Sat, 24 May 2008 16:10:54 +0200 with message-id [EMAIL PROTECTED] and subject line Re: Bug#482694: linux-image-2.6-amd64: debian/copyright is wrong has caused the Debian Bug report #482694, regarding linux-image-2.6-amd64: debian/copyright is wrong to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 482694: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=482694 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems ---BeginMessage--- Package: linux-image-2.6-amd64 Version: 2.6.25+14 Severity: serious Justification: wrong debian/copyright It's a well known fact that the kernel is mostly GPLv2 only, and /usr/share/doc/linux-image-2.6-amd64/copyright reads: This package is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- ·O· Pierre Habouzit ··O[EMAIL PROTECTED] OOOhttp://www.madism.org ---End Message--- ---BeginMessage--- On Sat, May 24, 2008 at 02:00:44PM +, Pierre Habouzit wrote: Package: linux-image-2.6-amd64 Version: 2.6.25+14 Severity: serious Justification: wrong debian/copyright It's a well known fact that the kernel is mostly GPLv2 only, and /usr/share/doc/linux-image-2.6-amd64/copyright reads: This package is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. Okay, my bad, this is the virtual package. don't mind me. -- ·O· Pierre Habouzit ··O[EMAIL PROTECTED] OOOhttp://www.madism.org pgpVIoHii5cPk.pgp Description: PGP signature ---End Message---
Re: Bug#482675: Kernel oops on amd64 quad core 9850
reassign 482675 linux-2.6 2.6.24-6 thanks On Saturday 24 May 2008, Marcus Carlson wrote: Comments/Problems: This is a brand new machine, also the harddrive is a new 1 TB sata (tried the same on an old 200 GB sata, but same problem). Everyting goes well until its formatting the second partition to ext3. It will hang in installation and the console gives me an oops. The oops is an indication of a kernel problem. Therefore reassigning to the kernel team. Cheers, FJP -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed (with 1 errors): Re: Bug#482675: Kernel oops on amd64 quad core 9850
Processing commands for [EMAIL PROTECTED]: reassign 482675 linux-2.6 Bug#482675: Kernel oops on amd64 quad core 9850 Bug reassigned from package `linux-2.6' to `linux-2.6'. retitle 482675 Unknown command or malformed arguments to command. found 482675 2.6.24-7 Bug#482675: Kernel oops on amd64 quad core 9850 Bug marked as found in version 2.6.24-7. thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
kernel update failure
When software update tries to update my kernel I get: linux-image-2.6.18-6-powerpc_2.6.18.dfsg.1-18etch4_powerpc.deb: failed in buffer_write(fd) (10, ret=-1) I have no idea why. It has done this repeatedly, and keeps telling me to update the kernel. It is most annoying. BC -- /*** Bronson Crothers Stillwater Scientific Instruments 20 Godfrey Dr. Orono ME 04473-3610 Phone: 207 866 6542 FAX: 207 866 6501 de AA1ZB -... ...- Email: [EMAIL PROTECTED] **/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#478314: the same on alpha
There seems to be the same problem on alpha: http://buildd.debian.org/~jeroen/status/package.php?suite=unstablep=linux-modules-extra-2.6a=alpha Ondrej -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#482675: Kernel oops on amd64 quad core 9850
reassign 482675 linux-2.6 retitle 482675 found 482675 2.6.24-7 thanks Marcus Carlson [EMAIL PROTECTED] writes: Comments/Problems: This is a brand new machine, also the harddrive is a new 1 TB sata (tried the same on an old 200 GB sata, but same problem). Everyting goes well until its formatting the second partition to ext3. It will hang in installation and the console gives me an oops. This looks to be a kernel issue and unrelated to Debian Installer itself. I'm reassigning the bug to the package. Cheers, -- O T A V I OS A L V A D O R - E-mail: [EMAIL PROTECTED] UIN: 5906116 GNU/Linux User: 239058 GPG ID: 49A5F855 Home Page: http://otavio.ossystems.com.br - Microsoft sells you Windows ... Linux gives you the whole house. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#482703: linux-image-686: kernel is xen enabled by default
Package: linux-image-686 Version: 2.6.25+14 Severity: normal grep XEN /boot/config-2.6.25-2-686 CONFIG_XEN=y CONFIG_XEN_BLKDEV_FRONTEND=m CONFIG_XEN_NETDEV_FRONTEND=m CONFIG_HVC_XEN=y -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-686 depends on: ii linux-image-2.6-686 2.6.25+14 Linux 2.6 image on PPro/Celeron/PI linux-image-686 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: Re: battery: After power off, something not turn-off and consume power
Processing commands for [EMAIL PROTECTED]: found 481493 2.6.24-1 Bug#481493: battery: After power off, something not turn-off and consume power. Bug marked as found in version 2.6.24-1. found 481493 2.6.25-2 Bug#481493: battery: After power off, something not turn-off and consume power. Bug marked as found in version 2.6.25-2. thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#482703: marked as done (linux-image-686: kernel is xen enabled by default)
Your message dated Sat, 24 May 2008 17:15:39 +0200 with message-id [EMAIL PROTECTED] and subject line Re: Bug#482703: linux-image-686: kernel is xen enabled by default has caused the Debian Bug report #482703, regarding linux-image-686: kernel is xen enabled by default to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 482703: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=482703 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems ---BeginMessage--- Package: linux-image-686 Version: 2.6.25+14 Severity: normal grep XEN /boot/config-2.6.25-2-686 CONFIG_XEN=y CONFIG_XEN_BLKDEV_FRONTEND=m CONFIG_XEN_NETDEV_FRONTEND=m CONFIG_HVC_XEN=y -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-686 depends on: ii linux-image-2.6-686 2.6.25+14 Linux 2.6 image on PPro/Celeron/PI linux-image-686 recommends no packages. -- no debconf information ---End Message--- ---BeginMessage--- On Sat, May 24, 2008 at 04:43:56PM +0200, zsuzsi wrote: grep XEN /boot/config-2.6.25-2-686 CONFIG_XEN=y No bug, read old bugs for the same problem before reporting a new one. Bastian -- Fascinating, a totally parochial attitude. -- Spock, Metamorphosis, stardate 3219.8 ---End Message---
Bug#481493: battery: After power off, something not turn-off and consume power
found 481493 2.6.24-1 found 481493 2.6.25-2 thanks maximilian attems wrote: Renato S. Yamane wrote: Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core) try out 2.6.25 from unstable just installs fin in testing. can you reproduce there? I try linux-image 2.6.25-2 and found the same problem. I check that DebianEeePC have a similar problem[1] and the responsible is snd_hda_intel driver. But I don't have this sound driver loaded. [1] http://wiki.debian.org/DebianEeePC/HowTo/Troubleshooting#head-84d9d8a97c9ce198c59edd9cd93a05ab24fd1ff8 $lsmod # lsmod Module Size Used by omnibook 55220 0 i915 27648 2 drm72280 3 i915 rfcomm 36336 0 l2cap 22784 5 rfcomm bluetooth 52900 4 rfcomm,l2cap ipv6 241956 12 ppdev 8676 0 parport_pc 25860 0 lp 11012 0 parport33868 3 ppdev,parport_pc,lp acpi_cpufreq9228 0 cpufreq_userspace 3812 0 cpufreq_ondemand8428 1 cpufreq_stats 5216 0 freq_table 4512 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats cpufreq_conservative 7432 0 cpufreq_powersave 1856 0 loop 16708 0 firewire_sbp2 15956 0 joydev 11328 0 snd_intel8x0 31740 1 snd_seq_dummy 3780 0 snd_seq_oss28544 0 snd_intel8x0m 16684 1 pcmcia 36044 0 ipw2200 130760 0 snd_seq_midi8064 0 snd_rawmidi22528 1 snd_seq_midi ieee80211 30632 1 ipw2200 ieee80211_crypt 5860 1 ieee80211 snd_ac97_codec 91300 2 snd_intel8x0,snd_intel8x0m snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi snd_seq45872 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event sdhci 16428 0 ac97_bus1952 1 snd_ac97_codec snd_pcm_oss37824 0 snd_mixer_oss 14880 1 snd_pcm_oss snd_pcm68228 4 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss psmouse35920 0 snd_seq_device 7564 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq pcspkr 3136 0 rtc14272 0 iTCO_wdt 11204 0 snd_timer 21320 2 snd_seq,snd_pcm tifm_7xx1 7456 0 serio_raw 6532 0 mmc_core 43740 1 sdhci firmware_class 9088 2 pcmcia,ipw2200 tifm_core 9788 1 tifm_7xx1 yenta_socket 24300 1 rsrc_nonstatic 11584 1 yenta_socket pcmcia_core36436 3 pcmcia,yenta_socket,rsrc_nonstatic snd48772 15 snd_intel8x0,snd_seq_oss,snd_intel8x0m,snd_rawmidi,snd_ac97_codec,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer soundcore 7488 1 snd snd_page_alloc 9992 3 snd_intel8x0,snd_intel8x0m,snd_pcm rng_core4900 0 container 4736 0 video 19728 0 output 3712 1 video battery 8448 0 ac 4448 0 button 8240 0 intel_agp 25084 1 agpgart31720 3 drm,intel_agp evdev 11328 7 ext3 120264 2 jbd43444 1 ext3 mbcache 8260 1 ext3 sg 33140 0 sr_mod 16804 0 cdrom 31872 1 sr_mod sd_mod 26072 4 ide_pci_generic 4228 0 [permanent] ide_core 100312 1 ide_pci_generic ahci 27336 0 usbhid 40192 0 hid36032 1 usbhid ff_memless 5384 1 usbhid ata_piix 20004 3 ata_generic 8004 0 libata142032 3 ahci,ata_piix,ata_generic scsi_mod 138508 5 firewire_sbp2,sg,sr_mod,sd_mod,libata firewire_ohci 20836 0 firewire_core 35680 2 firewire_sbp2,firewire_ohci crc_itu_t 2176 1 firewire_core ehci_hcd 32620 0 uhci_hcd 22352 0 usbcore 130032 4 usbhid,ehci_hcd,uhci_hcd sky2 42500 0 dock 10448 1 libata thermal19100 0 processor 39660 3 acpi_cpufreq,thermal fan 5636 0 Best regards, Renato S. Yamane -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Bug#435983: mount: fails to detect LABEL=foo filesystems
Marco d'Itri wrote: On Mar 14, Holger Levsen [EMAIL PROTECTED] wrote: also sprach Marco d'Itri [EMAIL PROTECTED] [2007.09.10.1409 +0200]: I will do it ASAP. Please do not do this by yourself because the udev rules files need to be renamed first (or else I would need to add conflicts and you would need to move the file). Marco, any news on this? Yes, I still hold the same opinion and still plan to work on udev ASAP. Do not add these rules without my approval. This bug is causing trouble for more and more people. Please, Marco, if you do not have the time to fix it by adding these rules, at least let us know what are the changes you though to at least let anyone else work on them, even if you are the one approving them. Ahora también puedes acceder a tu correo Terra desde el móvil. Infórmate pinchando aquí. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: tagging 429064
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.9.26 tags 429064 + pending Bug#429064: linux-libc-dev: linux/types.h conflicts with sys/ustat.h Tags were: sid lenny Tags added: pending End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
2.6.25-4 upload
hello planing to upload latest sid branch on tuesday, has already collected enough fixes that are worthwile. thanks to waldi for clearing the ABI. please queue your eventual additions on monday. thanks -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#482757: kqemu-modules-2.6.18-6-686: no /dev/kqemu after modprobe
Package: kqemu-modules-2.6.18-6-686 Version: 2.6.18+1.3.0~pre9-4etch2 Severity: important # modprobe kqemu # dmesg | tail QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2006 Fabrice Bellard This is a proprietary product. Read the LICENSE file for more information Redistribution of this module is prohibited without authorization KQEMU installed, max_locked_mem=1038264kB. # ls /dev/kqemu ls: /dev/kqemu: No such file or directory # -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-6-686 Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Versions of packages kqemu-modules-2.6.18-6-686 depends on: ii linux-image-2.6.18 2.6.18.dfsg.1-18etch4 Linux 2.6.18 image on PPro/Celeron kqemu-modules-2.6.18-6-686 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#482762: linux-image-2.6.25-2-686: initrd always loaded
Package: linux-image-2.6.25-2-686 Version: 2.6.25-3 Severity: normal i cannot disable initrd at lilo commandline. linux noinitrd -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.25 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.25-2-686 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.25-2-686 recommends: ii libc6-i6862.7-11 GNU C Library: Shared libraries [i -- debconf information excluded -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#482762: marked as done (linux-image-2.6.25-2-686: initrd always loaded)
Your message dated Sat, 24 May 2008 22:16:42 +0200 with message-id [EMAIL PROTECTED] and subject line Re: Bug#482762: linux-image-2.6.25-2-686: initrd always loaded has caused the Debian Bug report #482762, regarding linux-image-2.6.25-2-686: initrd always loaded to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 482762: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=482762 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems ---BeginMessage--- Package: linux-image-2.6.25-2-686 Version: 2.6.25-3 Severity: normal i cannot disable initrd at lilo commandline. linux noinitrd -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.25 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.25-2-686 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.25-2-686 recommends: ii libc6-i6862.7-11 GNU C Library: Shared libraries [i -- debconf information excluded ---End Message--- ---BeginMessage--- On Sat, May 24, 2008 at 09:53:24PM +0200, zsuzsi wrote: Package: linux-image-2.6.25-2-686 Version: 2.6.25-3 Severity: normal i cannot disable initrd at lilo commandline. linux noinitrd ei bug reports are not the right place for support question. linux images are build modular due to several reasons, if you haven't yet thought why a little reasearch will help you. debian user is the mailing list for user support. ---End Message---
Bug#482773: linux-image-2.6.25-2-amd64: bootprocess hangs after Begin: Waiting for the root filesystem... ...
Package: linux-image-2.6.25-2-amd64 Version: 2.6.25-3 Severity: important Hi, the kernel in unstable doesn't boot for some reason. The last message it prints is Begin: Waiting for root filesystem... I do think that this has something to do with the initramfs. According to google the initramfs is too large to be loaded, or something. I've already tried to downgrade the initramfs-tools to the old etch-version, but that didn't change a thing. I've also tried to rebuild a smaller initramfs by changing MODULES=most to MODULES=dep in /etc/initramfs-tools/initramfs.conf running update-initramfs -k 2.6.25-2-amd64 -u -v. But the bootprocess still hung. Please tell me, if you have any ideas what the problem is, or what I could do, to get additional informations. -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.18-4-amd64 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.25-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.25-2-amd64 recommends no packages. -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.25-2-amd64/preinst/abort-overwrite-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/prerm/removing-running-kernel-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/postinst/old-initrd-link-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/postinst/create-kimage-link-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/preinst/failed-to-move-modules-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/preinst/abort-install-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/postinst/kimage-is-a-directory: linux-image-2.6.25-2-amd64/postinst/depmod-error-2.6.25-2-amd64: false linux-image-2.6.25-2-amd64/postinst/bootloader-test-error-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/postinst/old-system-map-link-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/prerm/would-invalidate-boot-loader-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/preinst/overwriting-modules-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/postinst/depmod-error-initrd-2.6.25-2-amd64: false linux-image-2.6.25-2-amd64/postinst/old-dir-initrd-link-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/preinst/elilo-initrd-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/postinst/bootloader-error-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/preinst/lilo-initrd-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.25-2-amd64/preinst/initrd-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/preinst/bootloader-initrd-2.6.25-2-amd64: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]