Patch for Backport of the Linux MegaRAID driver for SAS based RAID controllers for Debian Stretch

Package: linux-image-4.9.0-5-amd64 Version: 4.9.65-3+deb9u2 Dear kernel Mantainers, backport of the megaraid_sas driver from kernel branch 4.14.x to kernel branch 4.9.x Scope: Debian stretch use kernel branch 4.9.x megaraid_sas driver inside kernel branch 4.9.x does not have support for

Bug#890950:

I've reworked my patches and split to 3 segments that take your feedback into account. Can you please review these? With setting resume_offset on kernel command line I confirmed this works out of the box for me.

Bug#891060: Atheros AR9271 ath9k_htc USB WiFi connected but IP traffic stops

It is also worth noting that, in addition to the packet and byte counters increasing, the activity LED on the adapter continues to blink while IP traffic is stopped. Kind regards, -- Ben Caradoc-Davies Director Transient Software Limited New Zealand

Processed: found 891060 in linux/4.14.17-1

Processing commands for cont...@bugs.debian.org: > found 891060 linux/4.14.17-1 Bug #891060 [src:linux] Atheros AR9271 ath9k_htc USB WiFi connected but IP traffic stops Marked as found in versions linux/4.14.17-1. > thanks Stopping processing here. Please contact me if you need assistance. --

Bug#891060: Atheros AR9271 ath9k_htc USB WiFi connected but IP traffic stops

Package: src:linux Version: 4.15.4-1 Severity: normal Dear Maintainer, starting with 4.14.17-1 and also seen on 4.15.4-1, my USB Wifi adapter remains connected to my WPA2/CCMP access point but, after some time, minutes to hours, all IP traffic stops (or at least I see no responses). IP traffic

Processed: found 891056 in linux/4.14.7-1, found 891056 in linux/4.14.13-1, found 891056 in linux/4.14.17-1

Processing commands for cont...@bugs.debian.org: > found 891056 linux/4.14.7-1 Bug #891056 [src:linux] Reproducible Intel GPU hang on rcs0 with ecode 9:0:0x86dd Marked as found in versions linux/4.14.7-1. > found 891056 linux/4.14.13-1 Bug #891056 [src:linux] Reproducible Intel GPU hang on

Bug#891056: Reproducible Intel GPU hang on rcs0 with ecode 9:0:0x86dffffd

Package: src:linux Version: 4.15.4-1 Severity: normal Dear Maintainer, I have a reproducible GPU hang when opening one particular workspace with Eclipse Oxygen.2 (eclipse-jee-oxygen-2-linux-gtk-x86_64), *with* SWT_GTK3=0 (to use GTK2), and *with* xfwm4 compositing enabled. With GTK3 or without

Processed: notfound 883425 in linux/4.13.13-1

Processing commands for cont...@bugs.debian.org: > notfound 883425 linux/4.13.13-1 Bug #883425 [src:linux] stale Android device entries in Thunar after USB disconnection Ignoring request to alter found versions of bug #883425 to the same values previously set > thanks Stopping processing here.

Processed: found 883425 in linux/4.14.2-1

Processing commands for cont...@bugs.debian.org: > found 883425 linux/4.14.2-1 Bug #883425 [src:linux] stale Android device entries in Thunar after USB disconnection Marked as found in versions linux/4.14.2-1. > thanks Stopping processing here. Please contact me if you need assistance. --

Processed: retitle 883425 to stale Android device entries in Thunar after USB disconnection ...

Processing commands for cont...@bugs.debian.org: > retitle 883425 stale Android device entries in Thunar after USB disconnection Bug #883425 [linux-image-4.14.0-3-amd64] linux-image 4.14.x: stale Android device entries in Thunar after USB disconnection Changed Bug title to 'stale Android device

Bug#883425: stale Android device entries in Thunar after USB disconnection

This bug is still present in linux-image-4.15.0-1-amd64 4.15.4-1. Kind regards, -- Ben Caradoc-Davies Director Transient Software Limited New Zealand

Bug#891042: firmware-amd-graphics: Please include AMD Raven Ridge firmware

Package: firmware-amd-graphics Version: 20170823-1 Severity: wishlist Dear Maintainer, Please include the blobs for newest AMD Vega based hadrware. The files are allready in kernel.org repo:

Accepted nfs-utils 1:1.3.4-2.2 (source) into unstable

-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Tue, 06 Feb 2018 21:20:36 +0200 Source: nfs-utils Binary: nfs-kernel-server nfs-common Architecture: source Version: 1:1.3.4-2.2 Distribution: unstable Urgency: medium Maintainer: Debian kernel team

nfs-utils_1.3.4-2.2_source.changes ACCEPTED into unstable

Accepted: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Tue, 06 Feb 2018 21:20:36 +0200 Source: nfs-utils Binary: nfs-kernel-server nfs-common Architecture: source Version: 1:1.3.4-2.2 Distribution: unstable Urgency: medium Maintainer: Debian kernel team

Bug#887695: marked as done (nfs-utils FTBFS with glibc 2.26)

Your message dated Wed, 21 Feb 2018 21:20:50 + with message-id and subject line Bug#887695: fixed in nfs-utils 1:1.3.4-2.2 has caused the Debian Bug report #887695, regarding nfs-utils FTBFS with glibc 2.26 to be marked as done. This means that you claim

Bug#890950: initramfs-tools: Resuming from hibernated swapfile fails

Thanks, I appreciate your feedback. Some more comments nested below. > > > > 1) It requires that uswpswp is installed (to provide /bin/resume)[...] > > No, it runs /bin/resume which is installed by klibc-utils. (uswsusp > installs its resume implementation as /sbin/resume. That's what the >

Upcoming stable point release (9.4)

Hi, The next point release for "stretch" (9.4) is scheduled for Saturday, March 10th. Processing of new uploads into stretch-proposed-updates will be frozen during the preceding weekend. Regards, Adam

Bug#891039: libusbip: error: port number exceeds 128

Package: usbip Version: 2.0+4.14.13-1 Severity: important Dear Maintainer, When I try to access the USB devices exported with usbip from another machine, even before I try to access the remote usbip server I gaet the strange error: # modprobe vhci-hcd # usbip port libusbip: error: port number

Bug#891036: Even after updating "usbip" to usbip_2.0+4.15.4-1_amd64.deb problem remains

I have also updated the "usbip" package to version usbip_2.0+4.15.4-1_amd64.deb However, the problem with the number of ports still exists: # usbip port libusbip: error: port number exceeds 128 usbip: error: open vhci_driver usbip: error: list imported devices -- Wojciech M Zabolotny, PhD

Bug#891036: Problem occurs in 4.13 and 4.14, but not in 4.12

I have repeated my tests, starting my Debian/testing system with the 4.13.0-2 kernel, and the same problem occured. Then I have started the system with yet older 4.12.0-2 kernel ( uname -a returns: Linux wzab 4.12.0-2-amd64 #1 SMP Debian 4.12.13-1 (2017-09-19) x86_64 GNU/Linux ) Now the vhci_hcd

Bug#891036: Problem still persists in kernel 4.15

I have installed the kernel 4.15 from Debian/sid Now I get the following messages in kernel log after "modprobe vhci-hcd": [  234.776615] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [  234.776622] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 5 [  234.776649] vhci_hcd:

Bug#891039: Duplicate report

Please remove that report or at least join it with 891036. I have resubmitted the report, as it seemed that 891036 was rejected. -- Wojciech M Zabolotny, PhD Institute of Electronic Systems Faculty of Electronics and Information Technology Warsaw University of Technology

Bug#891036: More details - the problem is associated with the vhci-hcd driver.

I have just found, that the problem occurs earlier. Just after I load the vhci-hcd driver, I can see the following in the kernel log: [  115.909607] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [  115.909614] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 5 [ 

Bug#891038: Please document "cloud" variant differences in the description

Package: linux-image-cloud-amd64 Severity: wishlist The description of linux-image-cloud-amd64 just says: This package depends on the latest Linux kernel and modules for use on Amazon EC2, Google Compute Engine and Microsoft Azure cloud platforms.

Bug#891037: dmcrypt_write: page allocation stalls for 10008ms, order:0, mode:0x2400000(GFP_NOIO)

Package: src:linux Version: 4.9.65-3+deb9u2 Severity: important My system is somewhat memory constrained. Lots of Chromium and Firefox tabs and a kvm running. Sometimes when I open a new tab in Chromium (= need another 200-300 MiB of RAM because Chromium uses multiple render processes) my system

Bug#891036: libusbip: error: port number exceeds 128

Package: usbip Version: 2.0+4.14.13-1 Severity: important Dear Maintainer, When I try to access the USB devices exported with usbip from another machine, even before I try to access the remote usbip server I gaet the strange error: # modprobe vhci-hcd # usbip port libusbip: error: port number

Bug#890039: linux-image-4.14.0-3-amd64: unable to handle kernel NULL pointer dereference

Control: forcemerge 888954 -1 On Wed, 2018-02-21 at 17:32 +, Thomas Pircher wrote: > I'm experiencing the same bug. When updating the system, the computer becomes > unresponsive and after a hard reboot I see a kernel error in the log > (BUG: unable to handle kernel NULL pointer dereference at

Processed: Re: Bug#890902: firmware-misc-nonfree: Please include ti_3410.fw / ti_5052.fw firmwares

Processing control commands: > tag -1 upstream help Bug #890902 [firmware-misc-nonfree] firmware-misc-nonfree: Please include ti_3410.fw / ti_5052.fw firmwares Added tag(s) upstream and help. -- 890902: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=890902 Debian Bug Tracking System Contact

Bug#890902: firmware-misc-nonfree: Please include ti_3410.fw / ti_5052.fw firmwares

Control: tag -1 upstream help On Tue, 2018-02-20 at 12:55 +, Jonathan McDowell wrote: > Package: firmware-misc-nonfree > Version: 20170823-1 > Severity: wishlist > > I've recently obtained a TI 3410 device using the ti_usb_3410_5052 > driver. It seems that although the appropriate firmware

Processed: Re: Bug#890039: linux-image-4.14.0-3-amd64: unable to handle kernel NULL pointer dereference

Processing control commands: > forcemerge 888954 -1 Bug #888954 {Done: Salvatore Bonaccorso } [src:linux] libvirt-daemon: System freezes when restarting libvirtd while VM is running Bug #888992 {Done: Salvatore Bonaccorso } [src:linux]

Processed: Re: Bug#890950: initramfs-tools: Resuming from hibernated swapfile fails

Processing control commands: > tag -1 moreinfo Bug #890950 [initramfs-tools] initramfs-tools: Resuming from hibernated swapfile fails Added tag(s) moreinfo. -- 890950: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=890950 Debian Bug Tracking System Contact ow...@bugs.debian.org with

Bug#890950: initramfs-tools: Resuming from hibernated swapfile fails

Control: tag -1 moreinfo On Tue, 2018-02-20 at 22:11 +, mario.limoncie...@dell.com wrote: > Package: initramfs-tools > Version: 0.130ubuntu2 > Severity: important > > Dear Maintainer, > > I've found that resuming from a hibernated swapfile using the kernel hibernate > implementation fails.

Bug#890039: linux-image-4.14.0-3-amd64: unable to handle kernel NULL pointer dereference

I'm experiencing the same bug. When updating the system, the computer becomes unresponsive and after a hard reboot I see a kernel error in the log (BUG: unable to handle kernel NULL pointer dereference at 00b0, IP: pids_free+0x11/0x40). I'm using linux-image-4.14.0-3-amd64 (4.14.13-1)

Bug#885166: instability with 4.14 regarding KVM virtualization

On Mon, Feb 19, 2018 at 06:31:16AM +0100, Salvatore Bonaccorso wrote: > On Sun, Feb 18, 2018 at 11:34:21AM +0100, Marc Haber wrote: > > On Sun, Feb 18, 2018 at 10:15:43AM +0100, Salvatore Bonaccorso wrote: > > > Looking today through the kernel archive, I noticed an answer from > > > Paolo

Bug#890999: marked as done (VirtualBox modules built against headers version 4.14.17-1 cannot be loaded by kernel version 4.14.13-1: Unknown symbol __x86_indirect_thunk_r15 (err 0))

Your message dated Wed, 21 Feb 2018 14:30:56 +0100 with message-id <1519219856.2388.7.ca...@debian.org> and subject line Re: Bug#890999: VirtualBox modules built against headers version 4.14.17-1 cannot be loaded by kernel version 4.14.13-1: Unknown symbol __x86_indirect_thunk_r15 (err 0) has

Bug#890999: VirtualBox modules built against headers version 4.14.17-1 cannot be loaded by kernel version 4.14.13-1: Unknown symbol __x86_indirect_thunk_r15 (err 0)

Package: linux-headers-4.14.0-3-amd64 Version: 4.14.17-1 When I build VirtualBox kernel modules using linux-headers-4.14.0-3-amd64 version 4.14.17-1, the resulting modules can't be loaded using linux-image-4.14.0-3-amd64 version 4.14.13-1. When I build the same modules using headers version

[PATCH v4] scripts/package/builddeb: split generating packaging and build

From: Riku Voipio Move debian/ directory generation out of builddeb to a new script, mkdebian. The package build commands are kept in builddeb, which is now an internal command called from debian/rules. With these changes in place, we can now use dpkg-buildpackage from

linux-latest_90_allonly.changes ACCEPTED into unstable, unstable

Accepted: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Tue, 20 Feb 2018 21:56:32 +0100 Source: linux-latest Binary: linux-source linux-doc linux-perf linux-image-alpha-generic linux-headers-alpha-generic linux-image-alpha-generic-dbg linux-image-alpha-smp

Accepted linux-latest 90 (all source) into unstable, unstable

-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Tue, 20 Feb 2018 21:56:32 +0100 Source: linux-latest Binary: linux-source linux-doc linux-perf linux-image-alpha-generic linux-headers-alpha-generic linux-image-alpha-generic-dbg linux-image-alpha-smp linux-headers-alpha-smp