Package: linux-2.6
Version: 2.6.32-13
Severity: important
Hi!
Running sbuild with lvm snapshots seems to hang and the kernel
is spitting out error messages. Seems it is having some trouble! Unfortunately
I'm no kernel expert so if you need something please ask.
Regards
Ben Hutchings b...@decadent.org.uk writes:
On Sat, 2010-05-29 at 17:20 +0200, Christoph Egger wrote:
Running sbuild with lvm snapshots seems to hang and the kernel
is spitting out error messages. Seems it is having some trouble!
Unfortunately
I'm no kernel expert so if you need
Package: linux-2.6
Version: 3.2.14-1
Severity: wishlist
Hi!
Debugging why my touchscreen won't work when connected to my
loongson-2f box but definitely working on amd64 I noticed the drivers
are missing from loongson-2f builds. Please consider enabling these
modules in distro-kernel builds
Ben Hutchings b...@decadent.org.uk writes:
On Sun, 2012-04-08 at 15:13 +0200, Christoph Egger wrote:
Package: linux-2.6
Version: 3.2.14-1
Severity: wishlist
Hi!
Debugging why my touchscreen won't work when connected to my
loongson-2f box but definitely working on amd64 I noticed
Ben Hutchings b...@decadent.org.uk writes:
On Sun, 2013-07-28 at 15:44 +, Christoph Egger wrote:
Package: src:linux
Version: 3.9.6-1~bpo70+1
Severity: normal
Hi!
I've upgraded the kernel on my QNAP to 3.9. Unfortunately, network
is now stuck around 1 MBit/s and I'm seeing lots
Ben Hutchings b...@decadent.org.uk writes:
On Wed, 2013-09-11 at 14:36 +0200, Christoph Egger wrote:
Ben Hutchings b...@decadent.org.uk writes:
On Sun, 2013-07-28 at 15:44 +, Christoph Egger wrote:
Package: src:linux
Version: 3.9.6-1~bpo70+1
Severity: normal
Hi!
I've
Package: flash-kernel
Version: 3.3
Severity: serious
Hi!
Overriding the RootFS device for the initramfs doesn't seem to
work. Might well also be a bug in initramfs-tools. Setting serious
because it prevents this system from booting, feel free to change.
[ 17.714542] IP-Config: eth0 hardware
Martin Michlmayr t...@cyrius.com writes:
reassign 707641 initramfs-tools
thanks
I don't see anything flash-kernel related here. Is this right after
an installation with d-i?
Actually it's cryptsetup's fault.
I'ts not pristine from the installer. Got dropbear / cryptroot to run
untill there
Package: src:linux
Version: 3.9.6-1~bpo70+1
Severity: normal
Hi!
The mv_cesa module seems to be broken (both in 3.2 stable kernel and
3.9). Symptoms: If I have mv_cesa loaded, do a cryptsetup open and
then a pvscan it doesn't find any suitable volumes. If I unload
mv_cesa before cryptsetup
Hi!
Christoph Egger christ...@debian.org writes:
The mv_cesa module seems to be broken (both in 3.2 stable kernel and
3.9). Symptoms: If I have mv_cesa loaded, do a cryptsetup open and
then a pvscan it doesn't find any suitable volumes. If I unload
mv_cesa before cryptsetup open, everything
Package: src:linux
Version: 3.9.6-1~bpo70+1
Severity: normal
Hi!
I've upgraded the kernel on my QNAP to 3.9. Unfortunately, network
is now stuck around 1 MBit/s and I'm seeing lots of error messages in
syslog like the ones below:
[ 203.642744] mv643xx_eth_port mv643xx_eth_port.0 eth0:
Package: src:linux
Version: 3.14.12-1
Severity: important
Hi!
After suspend/resume the computer is unable to perform any IPv6
connection (no ping to fixed IP, no nc, no anything). tcpdump was
unfortunately not helpfull in figuring out where exactly it breaks
because, as soon as I start
Hi!
Ben Hutchings b...@decadent.org.uk writes:
On Sat, 2014-07-19 at 08:39 +0200, Christoph Egger wrote:
Package: src:linux
Version: 3.14.12-1
Severity: important
After suspend/resume the computer is unable to perform any IPv6
connection (no ping to fixed IP, no nc, no anything
Control: reopen -1
Christoph Egger christ...@christoph-egger.org writes:
Sorry for the delay. I can't reproduce the problem using the current
kernel.
Taking that back. Seems just suspending for a few seconds does not
trigger this behaviour. I had the computer in suspend over the night and
now
Control: found -1 3.14.15-2
FWIW it still doesn't boot. I'll buy a jtag adapter post-debconf so I
can get anything out of it that might b usefull
Christoph
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Package: initramfs-tools
Version: 0.120
Severity: important
Hi!
the initramfs totally ignores the rootdelay / rootwait parameters and
just instantly boots up. As a result I always get a degraded array
activated as the second disk is not yet available. The second disk
just shows up a few blinks
Hi again
Also adding CONFIG_MVNETA would be great. It's the right driver for the
hardware and missing on arm64.
Christoph
Hi!
Seems it's missing so far: This is about arm64 kernel
Thanks!
Christoph
Source: linux
Version: 4.12.2-1~exp1
Severity: normal
Hi there!
Please consider enabling MMC_SDHCI_XENON on the 4.12 and later
kernels. With this modification I can successfully boot plain debian
kernels from Espressobin using the SD card.
it needs two patches for devicetree which should be on
On Sunday 4 March 2018 18:28:39 CET Martin Michlmayr wrote:
> * Christoph Egger <christ...@debian.org> [2014-08-22 21:32]:
> > FWIW it still doesn't boot. I'll buy a jtag adapter post-debconf so I
> > can get anything out of it that might b usefull
>
> T
Package: src:linux
Severity: wishlist
Dear Maintainer,
it would be great to have CONFIG_TLS enabled (as module like in fedora
I guess) to help experiment with this functionality.
Thanks!
Christoph
-- System Information:
Debian Release: 9.6
APT prefers stable
APT policy: (990, 'stable'),
Package: src:linux
Version: 5.4.19-1
Severity: important
Hi!
Starting with -4 the system fails to boot from encrypted
harddrive. switchng back to -3 kernel and everything works fine again.
Setup is unencrypted /boot (ext) and / (and other things) via lvm2
inside a cryptsetup volume
type:
22 matches
Mail list logo
