Package: src:linux
Version: 3.9.6-1~bpo70+1
Severity: normal
Hi!
The mv_cesa module seems to be broken (both in 3.2 stable kernel and
3.9). Symptoms: If I have mv_cesa loaded, do a cryptsetup open and
then a pvscan it doesn't find any suitable volumes. If I unload
mv_cesa before cryptsetup open
Hi!
Christoph Egger writes:
> The mv_cesa module seems to be broken (both in 3.2 stable kernel and
> 3.9). Symptoms: If I have mv_cesa loaded, do a cryptsetup open and
> then a pvscan it doesn't find any suitable volumes. If I unload
> mv_cesa before cryptsetup open, ever
Package: src:linux
Version: 3.9.6-1~bpo70+1
Severity: normal
Hi!
I've upgraded the kernel on my QNAP to 3.9. Unfortunately, network
is now stuck around 1 MBit/s and I'm seeing lots of error messages in
syslog like the ones below:
[ 203.642744] mv643xx_eth_port mv643xx_eth_port.0 eth0: receive
Source: linux
Version: 4.12.2-1~exp1
Severity: normal
Hi there!
Please consider enabling MMC_SDHCI_XENON on the 4.12 and later
kernels. With this modification I can successfully boot plain debian
kernels from Espressobin using the SD card.
it needs two patches for devicetree which should be on t
Hi again
Also adding CONFIG_MVNETA would be great. It's the right driver for the
hardware and missing on arm64.
Christoph
Hi!
Seems it's missing so far: This is about arm64 kernel
Thanks!
Christoph
Package: initramfs-tools
Version: 0.120
Severity: important
Hi!
the initramfs totally ignores the rootdelay / rootwait parameters and
just instantly boots up. As a result I always get a degraded array
activated as the second disk is not yet available. The second disk
just shows up a few blinks la
Package: src:linux
Severity: wishlist
Dear Maintainer,
it would be great to have CONFIG_TLS enabled (as module like in fedora
I guess) to help experiment with this functionality.
Thanks!
Christoph
-- System Information:
Debian Release: 9.6
APT prefers stable
APT policy: (990, 'stable'),
On Sunday 4 March 2018 18:28:39 CET Martin Michlmayr wrote:
> * Christoph Egger [2014-08-22 21:32]:
> > FWIW it still doesn't boot. I'll buy a jtag adapter post-debconf so I
> > can get anything out of it that might b usefull
>
> This bug report is quite old.
>
Package: src:linux
Version: 3.14.12-1
Severity: important
Hi!
After suspend/resume the computer is unable to perform any IPv6
connection (no ping to fixed IP, no nc, no anything). tcpdump was
unfortunately not helpfull in figuring out where exactly it breaks
because, as soon as I start tcpdump,
Hi!
Ben Hutchings writes:
> On Sat, 2014-07-19 at 08:39 +0200, Christoph Egger wrote:
>> Package: src:linux
>> Version: 3.14.12-1
>> Severity: important
>>
>> After suspend/resume the computer is unable to perform any IPv6
>> connection (no ping to fix
Control: reopen -1
Christoph Egger writes:
> Sorry for the delay. I can't reproduce the problem using the current
> kernel.
Taking that back. Seems just suspending for a few seconds does not
trigger this behaviour. I had the computer in suspend over the night and
now it.s back
et
Control: found -1 3.14.15-2
FWIW it still doesn't boot. I'll buy a jtag adapter post-debconf so I
can get anything out of it that might b usefull
Christoph
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.de
Package: src:linux
Version: 5.4.19-1
Severity: important
Hi!
Starting with -4 the system fails to boot from encrypted
harddrive. switchng back to -3 kernel and everything works fine again.
Setup is unencrypted /boot (ext) and / (and other things) via lvm2
inside a cryptsetup volume
type:L
Ben Hutchings writes:
> On Sun, 2013-07-28 at 15:44 +0000, Christoph Egger wrote:
>> Package: src:linux
>> Version: 3.9.6-1~bpo70+1
>> Severity: normal
>>
>> Hi!
>>
>> I've upgraded the kernel on my QNAP to 3.9. Unfortunately, network
>
Ben Hutchings writes:
> On Wed, 2013-09-11 at 14:36 +0200, Christoph Egger wrote:
>> Ben Hutchings writes:
>> > On Sun, 2013-07-28 at 15:44 +0000, Christoph Egger wrote:
>> >> Package: src:linux
>> >> Version: 3.9.6-1~bpo70+1
>> >> Severity
Package: linux-2.6
Version: 2.6.32-13
Severity: important
Hi!
Running sbuild with lvm snapshots seems to hang and the kernel
is spitting out error messages. Seems it is having some trouble! Unfortunately
I'm no kernel expert so if you need something please ask.
Regards
Christoph
Ben Hutchings writes:
> On Sat, 2010-05-29 at 17:20 +0200, Christoph Egger wrote:
>> Running sbuild with lvm snapshots seems to hang and the kernel
>> is spitting out error messages. Seems it is having some trouble!
>> Unfortunately
>> I'm no kernel expert
Package: flash-kernel
Version: 3.3
Severity: serious
Hi!
Overriding the RootFS device for the initramfs doesn't seem to
work. Might well also be a bug in initramfs-tools. Setting serious
because it prevents this system from booting, feel free to change.
[ 17.714542] IP-Config: eth0 hardware
Martin Michlmayr writes:
> reassign 707641 initramfs-tools
> thanks
>
> I don't see anything flash-kernel related here. Is this right after
> an installation with d-i?
Actually it's cryptsetup's fault.
I'ts not pristine from the installer. Got dropbear / cryptroot to run
untill there and enable
Package: linux-2.6
Version: 3.2.14-1
Severity: wishlist
Hi!
Debugging why my touchscreen won't work when connected to my
loongson-2f box but definitely working on amd64 I noticed the drivers
are missing from loongson-2f builds. Please consider enabling these
modules in distro-kernel builds
Reg
Ben Hutchings writes:
> On Sun, 2012-04-08 at 15:13 +0200, Christoph Egger wrote:
>> Package: linux-2.6
>> Version: 3.2.14-1
>> Severity: wishlist
>>
>> Hi!
>>
>> Debugging why my touchscreen won't work when connected to my
>> loong
22 matches
Mail list logo