Package: src:linux Version: 5.18.16-1 Severity: important X-Debbugs-Cc: pudh4...@gmail.com
Dear Maintainer, I'm currently using a Loongson 3A4000 based system as my desktop computer. After generating an initramfs image for the new kernel, it failed to boot. Following serial console output was observed: [ 0.000000] Linux version 5.18.0-4-loongson-3 (debian- ker...@lists.debian.org) (gcc-11 (Debian 11.3.0-5) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38.90.20220713) #1 SMP PREEMPT Debian 5.18.16-1 (2022-08-10) [ 0.000000] CpuClock = 1800000000 [ 0.000000] The bridge chip is LS7A [ 0.000000] CP0_Config3: CP0 16.3 (0xdc8030a0) [ 0.000000] CP0_PageGrain: CP0 5.1 (0x28000000) [ 0.000000] NUMA: Discovered 4 cpus on 1 nodes [ 0.000000] Node0: mem_type:1, mem_start:0x200000, mem_size:0xee MB [ 0.000000] start_pfn:0x80, end_pfn:0x3c00, num_physpages:0x3b80 [ 0.000000] Node0: mem_type:2, mem_start:0x90200000, mem_size:0x6fe MB [ 0.000000] start_pfn:0x24080, end_pfn:0x40000, num_physpages:0x1fb00 [ 0.000000] Node0: mem_type:2, mem_start:0x120000000, mem_size:0x1600 MB [ 0.000000] start_pfn:0x48000, end_pfn:0xa0000, num_physpages:0x77b00 [ 0.000000] Node0's addrspace_offset is 0x0 [ 0.000000] Node0: start_pfn=0x80, end_pfn=0xa0000 [ 0.000000] NUMA: set cpumask cpu 0 on node 0 [ 0.000000] NUMA: set cpumask cpu 1 on node 0 [ 0.000000] NUMA: set cpumask cpu 2 on node 0 [ 0.000000] NUMA: set cpumask cpu 3 on node 0 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0014c001 (ICT Loongson-3) [ 0.000000] FPU revision is: 00f70501 [ 0.000000] MSA revision is: 00060140 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is loongson,loongson64g-4core-ls7a [ 0.000000] Initial ramdisk at: 0x980000000a490000 (20085726 bytes) [ 0.000000] software IO TLB: mapped [mem 0x000000000020c000-0x000000000220c000] (32MB) [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: SANCOG SANCOG-QingLong-L402-V1.0-DeskTop/SANCOG- QingLong-L402-V1.0-DeskTop, BIOS Kunlun-L402-V4.1.4 05/25/2020 [ 0.000000] Detected 4 available CPU(s) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes. [ 0.000000] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64 bytes [ 0.000000] Unified victim cache 256kB 16-way, linesize 64 bytes. [ 0.000000] Unified secondary cache 8192kB 16-way, linesize 64 bytes. [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x000000000effffff] [ 0.000000] node 0: [mem 0x0000000090200000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000120000000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA32: 128 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 1152 pages in unavailable ranges [ 0.000000] percpu: Embedded 13 pages/cpu s170416 r8192 d34384 u212992 [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 488325 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=acb13fb9-2b52-4308-b49a-aebfcf6bacbb ro nohz=off swiotlb=16384 console=tty0 console=ttyS0,115200n8 rd_start=0xffffffff8a490000 rd_size=0x1327bde [ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 2204720K/7843840K available (10712K kernel code, 1755K rwdata, 2876K rodata, 2672K init, 16853K bss, 164832K reserved, 0K cma- reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31083 entries in 31 pages [ 0.000000] ftrace: allocated 31 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 320 [ 0.000000] ISA Bridge: /bus@10000000/isa@18000000 [ 0.000000] IO 0x0000000018000000..0x000000001801ffff -> 0x0000000000000000 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2123622718 ns [ 0.000000] sched_clock: 32 bits at 900MHz, resolution 1ns, wraps every 2386093055ns [ 0.007915] Console: colour dummy device 80x25 [ 0.012810] printk: console [tty0] enabled [ 0.016926] Calibrating delay loop... 3592.19 BogoMIPS (lpj=7184384) [ 0.039238] pid_max: default: 32768 minimum: 301 [ 0.044011] LSM: Security Framework initializing [ 0.048632] landlock: Up and running. [ 0.052292] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.059048] AppArmor: AppArmor initialized [ 0.063124] TOMOYO Linux initialized [ 0.066748] LSM support for eBPF active [ 0.070694] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) [ 0.078306] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) [ 0.087401] cblist_init_generic: Setting adjustable number of callback queues. [ 0.094662] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.100828] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.106996] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.113150] Performance counters: mips/loongson3 PMU enabled, 4 64-bit counters available to each CPU, irq 23 [ 0.123200] rcu: Hierarchical SRCU implementation. [ 0.128484] smp: Bringing up secondary CPUs ... [ 0.133208] Booting CPU#1... [ 4.074227] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes. [ 4.074235] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64 bytes [ 4.074238] Unified victim cache 256kB 16-way, linesize 64 bytes. [ 4.074241] Unified secondary cache 8192kB 16-way, linesize 64 bytes. [ 0.140338] CPU1 revision is: 0014c001 (ICT Loongson-3) [ 0.140358] FPU revision is: 00f70501 [ 0.140361] MSA revision is: 00060140 [ 0.153085] CPU#1 finished, CP0_ST=5400cce1 [ 0.197354] Booting CPU#2... [ 4.138373] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes. [ 4.138381] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64 bytes [ 4.138385] Unified victim cache 256kB 16-way, linesize 64 bytes. [ 4.138388] Unified secondary cache 8192kB 16-way, linesize 64 bytes. [ 0.203912] CPU2 revision is: 0014c001 (ICT Loongson-3) [ 0.203932] FPU revision is: 00f70501 [ 0.203935] MSA revision is: 00060140 [ 0.217103] CPU#2 finished, CP0_ST=5400cce1 [ 0.261344] Booting CPU#3... [ 4.202362] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes. [ 4.202369] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64 bytes [ 4.202373] Unified victim cache 256kB 16-way, linesize 64 bytes. [ 4.202376] Unified secondary cache 8192kB 16-way, linesize 64 bytes. [ 0.267896] CPU3 revision is: 0014c001 (ICT Loongson-3) [ 0.267916] FPU revision is: 00f70501 [ 0.267918] MSA revision is: 00060140 [ 0.281148] CPU#3 finished, CP0_ST=5400cce1 [ 0.325161] smp: Brought up 1 node, 4 CPUs [ 0.339350] node 0 deferred pages initialised in 8ms [ 0.344941] devtmpfs: initialized [ 0.349278] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.359095] futex hash table entries: 1024 (order: 2, 65536 bytes, linear) [ 0.366584] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.372583] audit: initializing netlink subsys (disabled) [ 0.378067] audit: type=2000 audit(0.316:1): state=initialized audit_enabled=0 res=1 [ 0.378271] thermal_sys: Registered thermal governor 'fair_share' [ 0.385844] thermal_sys: Registered thermal governor 'bang_bang' [ 0.391991] thermal_sys: Registered thermal governor 'step_wise' [ 0.398061] thermal_sys: Registered thermal governor 'user_space' [ 0.404174] cpuidle: using governor ladder [ 0.423684] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.431122] iommu: Default domain type: Translated [ 0.435985] iommu: DMA domain TLB invalidation policy: strict mode [ 0.442446] SCSI subsystem initialized [ 0.446658] NetLabel: Initializing [ 0.450015] NetLabel: domain hash size = 128 [ 0.454427] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.460166] NetLabel: unlabeled traffic allowed by default [ 0.465876] vgaarb: loaded [ 0.468609] clocksource: Switched to clocksource MIPS [ 0.505232] VFS: Disk quotas dquot_6.6.0 [ 0.509196] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) [ 0.516666] AppArmor: AppArmor Filesystem Enabled [ 0.524444] NET: Registered PF_INET protocol family [ 0.529548] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear) [ 0.539507] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear) [ 0.548128] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear) [ 0.555989] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear) [ 0.564212] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes, linear) [ 0.571786] TCP: Hash tables configured (established 65536 bind 65536) [ 0.578463] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear) [ 0.586038] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear) [ 0.592875] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear) [ 0.600243] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.605903] NET: Registered PF_XDP protocol family [ 0.610736] PCI: CLS 0 bytes, default 64 [ 0.614830] Trying to unpack rootfs image as initramfs... [ 0.620273] CPU 0 Unable to handle kernel paging request at virtual address 00000000003f8360, epc == 00000000003f8360, ra == ffffffff8312dbf4 [ 0.620298] Starting KVM with MIPS VZ extensions [ 0.633090] Oops[#1]: [ 0.640011] CPU: 0 PID: 8 Comm: kworker/u8:0 Not tainted 5.18.0-4-loongson-3 #1 Debian 5.18.16-1 [ 0.648989] Hardware name: SANCOG SANCOG-QingLong-L402-V1.0-DeskTop/SANCOG- QingLong-L402-V1.0-DeskTop, BIOS Kunlun-L402-V4.1.4 05/25/2020 [ 0.661488] Workqueue: events_unbound async_run_entry_fn [ 0.666848] $ 0 : 0000000000000000 ffffffff83ad1c48 0000000000000000 00000000003f8360 [ 0.674950] $ 4 : 0000000000000000 ffffffff83aa6038 0000000000000000 0000000000020000 [ 0.683046] $ 8 : 0000000000000000 0000000000000040 0000000000000001 0000000000000000 [ 0.691141] $12 : 0000000000000000 ffffffff83185274 0000000000000010 98000001202c3adf [ 0.699238] $16 : 980000000a490000 ffffffff83aa6038 0000000000000000 0000000000000000 [ 0.707334] $20 : 0000000000000000 0000000000000000 c00000000109c000 0000000001327bde [ 0.715429] $24 : 0000000000000038 ffffffff831dd420 [ 0.723526] $28 : 98000001202c0000 98000001202c3ba0 0000000000000000 ffffffff8312dbf4 [ 0.731621] Hi : 0000000000961ae7 [ 0.735225] Lo : 4bc6a7ef9e646d01 [ 0.738832] epc : 00000000003f8360 0x3f8360 [ 0.743233] ra : ffffffff8312dbf4 ZSTD_getErrorCode+0x14/0x38 [ 0.749306] Status: 5400cce3 KX SX UX KERNEL EXL IE [ 0.754320] Cause : 00000008 (ExcCode 02) [ 0.758369] BadVA : 00000000003f8360 [ 0.761977] PrId : 0014c001 (ICT Loongson-3) [ 0.766376] Modules linked in: [ 0.769457] Process kworker/u8:0 (pid: 8, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000) [ 0.780022] Stack : 980000000a490000 ffffffff83aa6038 ffffffff83d4c078 ffffffff83ad1f14 [ 0.788117] ffffffff83aa638c 0000000000000cc0 ffffffff83920000 ffffffff83aa6d8c [ 0.796213] 980000000a490000 0000000001327bde 0000000000000000 c00000000109c000 [ 0.804311] 0000000000020000 0000000000000000 00000000051a0800 0000000000400000 [ 0.812405] 0000000000020000 000000000000000a 0000000000000001 d5317fc51d224335 [ 0.820502] 980000000a490000 0000000001327bde 0000000000000000 ffffffff83af0000 [ 0.828597] ffffffff83af0000 ffffffff83af0000 ffffffff83af0000 ffffffff83af0000 [ 0.836694] ffffffff83d50000 ffffffff83aa6ec8 000000001f1ea19c ffffffff83af0000 [ 0.844790] ffffffff83920000 ffffffff83af0000 ffffffff837a78c0 ffffffff837a7890 [ 0.852887] ffffffff837a7868 ffffffff835fa484 ffffffff837f5198 d5317fc51d224335 [ 0.860981] ... [ 0.863443] Call Trace: [ 0.863445] [ 0.867400] [<ffffffff83aa6038>] error+0x0/0x28 [ 0.871976] [<ffffffff83ad1f14>] unzstd+0x20c/0x420 [ 0.876905] [<ffffffff83aa638c>] flush_buffer+0x0/0xec [ 0.882097] [<ffffffff83aa6d8c>] unpack_to_rootfs+0x9c/0x340 [ 0.887820] [<ffffffff83aa6ec8>] unpack_to_rootfs+0x1d8/0x340 [ 0.893625] [<ffffffff835fa484>] _printk+0x50/0x74 [ 0.898466] [<ffffffff83aa75a8>] do_populate_rootfs+0x78/0x144 [ 0.904361] [<ffffffff82c360c4>] async_run_entry_fn+0x54/0x1a0 [ 0.910257] [<ffffffff82c26748>] process_one_work+0x250/0x5d8 [ 0.916065] [<ffffffff82c26c7c>] worker_thread+0x1ac/0x5a8 [ 0.921610] [<ffffffff82c26ad0>] worker_thread+0x0/0x5a8 [ 0.926978] [<ffffffff82c31718>] kthread+0x130/0x178 [ 0.931992] [<ffffffff82c315e8>] kthread+0x0/0x178 [ 0.936833] [<ffffffff82c315e8>] kthread+0x0/0x178 [ 0.941674] [<ffffffff82ba5c0c>] ret_from_kernel_thread+0x14/0x1c [ 0.947837] [ 0.949327] Code: (Bad address in epc) [ 0.949327] [ 0.954613] [ 0.956150] ---[ end trace 0000000000000000 ]--- [ 0.957033] Initialise system trusted keyrings [ 0.965302] Key type blacklist registered [ 0.969377] workingset: timestamp_bits=40 max_order=19 bucket_order=0 [ 0.978769] zbud: loaded [ 0.981689] integrity: Platform Keyring initialized [ 0.986561] Key type asymmetric registered [ 0.990680] Asymmetric key parser 'x509' registered [ 21.388614] random: crng init done If I switched to a xz-compressed initrd, the kernel boots normally. ** Board Info (/sys/firmware/lefi/boardinfo) Board Info Manufacturer : SANCOG Board Name : SANCOG-LS3A4000-7A1000-1w-V1.0-DeskTop Family : LOONGSON3 BIOS Info Vendor : Kunlun Version : Kunlun-L402-V4.1.4-20200525181355 ROM Size : 4 KB Release Date : 2020-05-25 -- Package-specific info: ** Version: Linux version 5.18.0-4-loongson-3 (debian-kernel@lists.debian.org) (gcc-11 (Debian 11.3.0-5) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38.90.20220713) #1 SMP PREEMPT Debian 5.18.16-1 (2022-08-10) ** Command line: root=UUID=acb13fb9-2b52-4308-b49a-aebfcf6bacbb ro nohz=off swiotlb=16384 quiet console=tty0 console=ttyS0,115200n8 rd_start=0xffffffff8aa40000 rd_size=0xe0c6a8 ** Not tainted ** Kernel log: [ 8.558045] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 8.558826] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 8.558834] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.558837] usb usb5: Product: xHCI Host Controller [ 8.558841] usb usb5: Manufacturer: Linux 5.18.0-4-loongson-3 xhci-hcd [ 8.558844] usb usb5: SerialNumber: 0000:01:00.0 [ 8.563306] hid: raw HID events driver (C) Jiri Kosina [ 8.564387] pps pps0: new PPS source ptp0 [ 8.564747] igb 0000:04:00.0: added PHC on eth0 [ 8.564752] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection [ 8.564756] igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:23:9e:06:17:e8 [ 8.564762] igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF [ 8.564766] igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 8.597460] igb 0000:04:00.0 enp4s0: renamed from eth0 [ 8.603419] usbcore: registered new interface driver usbhid [ 8.603428] usbhid: USB HID core driver [ 8.604636] snd_hda_intel 0000:05:00.1: Force to snoop mode by module option [ 8.610405] hub 5-0:1.0: USB hub found [ 8.610588] hub 5-0:1.0: 2 ports detected [ 8.626517] input: SIGMACHIP USB Keyboard as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:05.0/usb4/4-1/4-1:1.0/0003:1C4F:0002.0001/input/input0 [ 8.636343] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.636430] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18 [ 8.636436] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.636440] usb usb6: Product: xHCI Host Controller [ 8.636443] usb usb6: Manufacturer: Linux 5.18.0-4-loongson-3 xhci-hcd [ 8.636447] usb usb6: SerialNumber: 0000:01:00.0 [ 8.644484] snd_hda_intel 0000:05:00.1: bound 0000:05:00.0 (ops initialize_plane [amdgpu]) [ 8.658073] hub 6-0:1.0: USB hub found [ 8.658143] hub 6-0:1.0: 2 ports detected [ 8.664005] Adding 16776176k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:16776176k SSFS [ 8.668376] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input1 [ 8.684429] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 8.684987] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 7 [ 8.723014] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:05.0-1/input0 [ 8.725307] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input2 [ 8.727890] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:05.0/usb4/4-1/4-1:1.1/0003:1C4F:0002.0002/input/input7 [ 8.729191] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input3 [ 8.745600] xhci_hcd 0000:02:00.0: hcc params 0x0200e080 hci version 0x100 quirks 0x0000000010800410 [ 8.746055] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 8.746067] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 8.746079] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 8.746206] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 8.746212] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.746216] usb usb7: Product: xHCI Host Controller [ 8.746219] usb usb7: Manufacturer: Linux 5.18.0-4-loongson-3 xhci-hcd [ 8.746222] usb usb7: SerialNumber: 0000:02:00.0 [ 8.746485] hub 7-0:1.0: USB hub found [ 8.746504] hub 7-0:1.0: 2 ports detected [ 8.746727] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.746775] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18 [ 8.746780] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.746784] usb usb8: Product: xHCI Host Controller [ 8.746787] usb usb8: Manufacturer: Linux 5.18.0-4-loongson-3 xhci-hcd [ 8.746790] usb usb8: SerialNumber: 0000:02:00.0 [ 8.746966] hub 8-0:1.0: USB hub found [ 8.746982] hub 8-0:1.0: 2 ports detected [ 8.784288] input: SIGMACHIP USB Keyboard System Control as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:05.0/usb4/4-1/4-1:1.1/0003:1C4F:0002.0002/input/input8 [ 8.784321] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input4 [ 8.784462] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input5 [ 8.784614] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input6 [ 8.787528] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:05.0-1/input1 [ 8.789818] input: USB OPTICAL MOUSE as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:05.0/usb4/4-2/4-2:1.0/0003:275D:0BA6.0003/input/input9 [ 8.808214] hid-generic 0003:275D:0BA6.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:05.0-2/input0 [ 8.862814] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Quota mode: none. [ 8.909451] Bluetooth: Core ver 2.22 [ 8.909524] NET: Registered PF_BLUETOOTH protocol family [ 8.909528] Bluetooth: HCI device and connection manager initialized [ 8.909543] Bluetooth: HCI socket layer initialized [ 8.909549] Bluetooth: L2CAP socket layer initialized [ 8.909564] Bluetooth: SCO socket layer initialized [ 8.918122] usbcore: registered new interface driver btusb [ 8.933803] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761 [ 8.935787] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.935794] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin [ 8.938913] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8761bu_fw.bin [ 8.938962] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin [ 8.939169] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8761bu_config.bin [ 8.939196] Bluetooth: hci0: RTL: cfg_sz 6, total sz 20522 [ 8.984018] audit: type=1400 audit(1657746341.183:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=402 comm="apparmor_parser" [ 8.985904] audit: type=1400 audit(1657746341.187:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=404 comm="apparmor_parser" [ 8.985926] audit: type=1400 audit(1657746341.187:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=404 comm="apparmor_parser" [ 8.985942] audit: type=1400 audit(1657746341.187:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=404 comm="apparmor_parser" [ 8.986120] audit: type=1400 audit(1657746341.187:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=403 comm="apparmor_parser" [ 8.986129] audit: type=1400 audit(1657746341.187:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=403 comm="apparmor_parser" [ 8.994018] audit: type=1400 audit(1657746341.195:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/mips64el-linux-gnuabi64/lightdm/lightdm-guest-session" pid=401 comm="apparmor_parser" [ 8.994039] audit: type=1400 audit(1657746341.195:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/mips64el-linux-gnuabi64/lightdm/lightdm-guest-session//chromium" pid=401 comm="apparmor_parser" [ 8.995086] audit: type=1400 audit(1657746341.195:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=407 comm="apparmor_parser" [ 8.998165] audit: type=1400 audit(1657746341.199:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=408 comm="apparmor_parser" [ 9.136770] Bluetooth: hci0: RTL: fw version 0x0999646b [ 9.150110] systemd-journald[261]: Oldest entry in /var/log/journal/ad4e6f11dbf94518994d5d221fbb16ba/system.journal is older than the configured file retention duration (1month), suggesting rotation. [ 9.150129] systemd-journald[261]: /var/log/journal/ad4e6f11dbf94518994d5d221fbb16ba/system.journal: Journal header limits reached or header out-of-date, rotating. [ 9.387245] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.387264] Bluetooth: BNEP filters: protocol multicast [ 9.387279] Bluetooth: BNEP socket layer initialized [ 9.399923] NET: Registered PF_ALG protocol family [ 12.660664] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 12.671559] Bluetooth: RFCOMM TTY layer initialized [ 12.671585] Bluetooth: RFCOMM socket layer initialized [ 12.671602] Bluetooth: RFCOMM ver 1.11 [ 12.876428] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready ** Model information system type : Generic Loongson64 System cpu model : ICT Loongson-3 V0.1 FPU V0.1 cpu model : ICT Loongson-3 V0.1 FPU V0.1 cpu model : ICT Loongson-3 V0.1 FPU V0.1 cpu model : ICT Loongson-3 V0.1 FPU V0.1 ** Loaded modules: tcp_diag inet_diag rfcomm cmac algif_hash ecb algif_skcipher af_alg bnep binfmt_misc btusb btrtl btbcm btintel btmtk bluetooth nls_ascii nls_cp437 joydev vfat fat evdev jitterentropy_rng sha512_generic snd_hda_codec_hdmi hid_generic ctr snd_hda_intel snd_intel_dspcfg drbg snd_hda_codec ansi_cprng usbhid hid snd_hda_core snd_hwdep snd_pcm snd_timer ecdh_generic rfkill snd igb ecc ptp soundcore xhci_pci pps_core xhci_hcd parport_pc parport fuse configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic ohci_pci amdgpu drm_ttm_helper ttm gpu_sched drm_dp_helper nvme drm_kms_helper syscopyarea sysfillrect nvme_core sysimgblt fb_sys_fops ohci_hcd ehci_pci drm ehci_hcd drm_panel_orientation_quirks usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Loongson Technology LLC Hyper Transport Bridge Controller [0014:7a00] Subsystem: Loongson Technology LLC Hyper Transport Bridge Controller [0014:7a00] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 Capabilities: <access denied> 00:00.1 Non-VGA unclassified device [0000]: Loongson Technology LLC Hyper Transport Bridge Controller [0014:7a10] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 00:04.0 USB controller [0c03]: Loongson Technology LLC OHCI USB Controller [0014:7a24] (prog-if 10 [OHCI]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/ohci@4,0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 39 NUMA node: 0 Region 0: Memory at 59510000 (64-bit, non-prefetchable) [size=32K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:04.1 USB controller [0c03]: Loongson Technology LLC EHCI USB Controller [0014:7a14] (prog-if 20 [EHCI]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/ehci@4,1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 32 NUMA node: 0 Region 0: Memory at 59518000 (64-bit, non-prefetchable) [size=32K] Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:05.0 USB controller [0c03]: Loongson Technology LLC OHCI USB Controller [0014:7a24] (prog-if 10 [OHCI]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/ohci@5,0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 40 NUMA node: 0 Region 0: Memory at 59520000 (64-bit, non-prefetchable) [size=32K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:05.1 USB controller [0c03]: Loongson Technology LLC EHCI USB Controller [0014:7a14] (prog-if 20 [EHCI]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/ehci@5,1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 38 NUMA node: 0 Region 0: Memory at 59528000 (64-bit, non-prefetchable) [size=32K] Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:07.0 Audio device [0403]: Loongson Technology LLC HDA (High Definition Audio) Controller [0014:7a07] Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/hda@7,0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 122 NUMA node: 0 Region 0: Memory at 59500000 (64-bit, non-prefetchable) [size=64K] 00:08.0 SATA controller [0106]: Loongson Technology LLC SATA AHCI Controller [0014:7a08] (prog-if 01 [AHCI 1.0]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/sata@8,0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 13 NUMA node: 0 Region 0: Memory at 59530000 (64-bit, non-prefetchable) [size=8K] Kernel driver in use: ahci 00:08.1 SATA controller [0106]: Loongson Technology LLC SATA AHCI Controller [0014:7a08] (prog-if 01 [AHCI 1.0]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/sata@8,1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 14 NUMA node: 0 Region 0: Memory at 59532000 (64-bit, non-prefetchable) [size=8K] Kernel driver in use: ahci 00:08.2 SATA controller [0106]: Loongson Technology LLC SATA AHCI Controller [0014:7a08] (prog-if 01 [AHCI 1.0]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/sata@8,2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 15 NUMA node: 0 Region 0: Memory at 59534000 (64-bit, non-prefetchable) [size=8K] Kernel driver in use: ahci 00:09.0 PCI bridge [0604]: Loongson Technology LLC PCI-to-PCI Bridge [0014:7a19] (rev 01) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/pci_bridge@9,0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 3 NUMA node: 0 Region 0: Memory at 59536000 (64-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: [disabled] [32-bit] Memory behind bridge: 59000000-590fffff [size=1M] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0b.0 PCI bridge [0604]: Loongson Technology LLC PCI-to-PCI Bridge [0014:7a09] (rev 01) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/pci_bridge@b,0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 NUMA node: 0 Region 0: Memory at 59537000 (64-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: [disabled] [32-bit] Memory behind bridge: 59100000-591fffff [size=1M] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0c.0 PCI bridge [0604]: Loongson Technology LLC PCI-to-PCI Bridge [0014:7a09] (rev 01) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/pci_bridge@c,0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 7 NUMA node: 0 Region 0: Memory at 59538000 (64-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: [disabled] [32-bit] Memory behind bridge: 59200000-592fffff [size=1M] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0d.0 PCI bridge [0604]: Loongson Technology LLC PCI-to-PCI Bridge [0014:7a19] (rev 01) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/pci_bridge@d,0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 NUMA node: 0 Region 0: Memory at 59539000 (64-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 20000-20fff [size=4K] [16-bit] Memory behind bridge: 59300000-593fffff [size=1M] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 PCI bridge [0604]: Loongson Technology LLC PCI-to-PCI Bridge [0014:7a29] (rev 01) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/bus@10000000/pci@1a000000/pci_bridge@11,0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 12 NUMA node: 0 Region 0: Memory at 5953a000 (64-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 21000-21fff [size=4K] [16-bit] Memory behind bridge: 59400000-594fffff [size=1M] [32-bit] Prefetchable memory behind bridge: 40000000-57ffffff [size=384M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 System peripheral [0880]: Loongson Technology LLC SPI Controller [0014:7a0b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 0 NUMA node: 0 Region 0: Memory at 5953b000 (64-bit, non-prefetchable) [size=4K] Region 2: Memory at 58000000 (64-bit, non-prefetchable) [size=16M] 00:17.0 ISA bridge [0601]: Loongson Technology LLC LPC Controller [0014:7a0c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 0 NUMA node: 0 01:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI]) Subsystem: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 2 NUMA node: 0 Region 0: Memory at 59000000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 02:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI]) Subsystem: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 4 NUMA node: 0 Region 0: Memory at 59100000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 03:00.0 Non-Volatile memory controller [0108]: Kingston Technology Company, Inc. A2000 NVMe SSD [2646:2263] (rev 03) (prog-if 02 [NVM Express]) Subsystem: Kingston Technology Company, Inc. A2000 NVMe SSD [2646:2263] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 6 NUMA node: 0 Region 0: Memory at 59200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme 04:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03) Subsystem: Intel Corporation I211 Gigabit Network Connection [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 8 NUMA node: 0 Region 0: Memory at 59300000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 20000 [size=32] Region 3: Memory at 59320000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 05:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Polaris 20 XL [Radeon RX 580 2048SP] [1002:6fdf] (rev ef) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Polaris 20 XL [Radeon RX 580 2048SP] [1043:05b3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 NUMA node: 0 Region 0: Memory at 40000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at 50000000 (64-bit, prefetchable) [size=2M] Region 4: I/O ports at 21000 [size=256] Region 5: Memory at 59400000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at 59440000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: amdgpu Kernel modules: amdgpu 05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] [1002:aaf0] Subsystem: ASUSTeK Computer Inc. Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] [1043:aaf0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 52 NUMA node: 0 Region 0: Memory at 59460000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel ** USB devices: Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 003: ID 275d:0ba6 USB OPTICAL MOUSE Bus 004 Device 002: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0bda:8771 Realtek Semiconductor Corp. Bluetooth Radio Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: mips64el (mips64) Kernel: Linux 5.18.0-4-loongson-3 (SMP w/4 CPU threads; PREEMPT) Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.18.0-4-loongson-3 depends on: ii initramfs-tools [linux-initramfs-tool] 0.142 ii kmod 30+20220630-3 ii linux-base 4.9 Versions of packages linux-image-5.18.0-4-loongson-3 recommends: ii apparmor 3.0.6-1 ii firmware-linux-free 20200122-1 ii pmon-update 0.3.1+b1 Versions of packages linux-image-5.18.0-4-loongson-3 suggests: ii debian-kernel-handbook 1.0.19 pn linux-doc-5.18 <none> Versions of packages linux-image-5.18.0-4-loongson-3 is related to: ii firmware-amd-graphics 20210818-1 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20210818-1 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information