Bug#1022268: marked as done (linux-image-5.10.0-19-amd64: Boot failure under xen as dom0)
Your message dated Fri, 21 Apr 2023 14:07:21 + with message-id and subject line Bug#1022126: fixed in linux 5.10.178-1 has caused the Debian Bug report #1022126, regarding linux-image-5.10.0-19-amd64: Boot failure under xen as dom0 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 1022126: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1022126 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: src:linux Version: 5.10.149-1 Severity: critical Justification: breaks the whole system X-Debbugs-Cc: mar...@mydatex.cz Dear Maintainer, after upgrade kernel from 5.10.0-18 to 5.10.0-19 system is unbootable. Problem is similar this bug https://bugzilla.kernel.org/show_bug.cgi?id=209177. I try recommended solution mpt3sas.max_queue_depth=1 but nothing helps. Without xen system boots. With xen I must use 5.10.0-18. Regards Dan -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: Supermicro product_name: Super Server product_version: 0123456789 chassis_vendor: Supermicro chassis_version: 0123456789 bios_vendor: American Megatrends Inc. bios_version: 2.2a board_vendor: Supermicro board_name: X11SSL-F board_version: 1.01 ** Network interface configuration: *** /etc/network/interfaces: source /etc/network/interfaces.d/* auto lo iface lo inet loopback iface eno2 inet manual auto xenbr1 iface xenbr1 inet static address 192.168.2.2 netmask 255.255.255.248 gateway 192.168.2.1 bridge_ports eno2 bridge_stp off # disable Spanning Tree Protocol bridge_waitport 0 # no delay before a port becomes available bridge_fd 0 # no forwarding delay iface eno1 inet manual auto xenbr0 iface xenbr0 inet manual bridge_ports eno1 bridge_stp off # disable Spanning Tree Protocol bridge_waitport 0 # no delay before a port becomes available bridge_fd 0 # no forwarding delay iface enp2s0 inet manual auto xenbr2 iface xenbr2 inet manual bridge_ports enp2s0 bridge_stp off # disable Spanning Tree Protocol bridge_waitport 0 # no delay before a port becomes available bridge_fd 0 # no forwarding delay ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5918] (rev 05) Subsystem: Super Micro Computer Inc Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [15d9:089a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: ie31200_edac Kernel modules: ie31200_edac 00:01.0 PCI bridge [0604]: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:13.0 Non-VGA unclassified device []: Intel Corporation 100 Series/C230 Series Chipset Family Integrated Sensor Hub [8086:a135] (rev 31) Subsystem: Super Micro Computer Inc 100 Series/C230 Series Chipset Family Integrated Sensor Hub [15d9:089a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel modules: intel_ish_ipc 00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI]) Subsystem: Super Micro Computer Inc 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [15d9:089a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:14.2 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem [8086:a131] (rev 31) Subsystem: Super Micro Computer Inc 100 Series/C230 Series Chipset Family Thermal
Bug#1022268: marked as done (linux-image-5.10.0-19-amd64: Boot failure under xen as dom0)
Your message dated Sun, 19 Mar 2023 19:00:10 + with message-id and subject line Bug#1022126: fixed in linux 6.1.20-1 has caused the Debian Bug report #1022126, regarding linux-image-5.10.0-19-amd64: Boot failure under xen as dom0 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 1022126: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1022126 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: src:linux Version: 5.10.149-1 Severity: critical Justification: breaks the whole system X-Debbugs-Cc: mar...@mydatex.cz Dear Maintainer, after upgrade kernel from 5.10.0-18 to 5.10.0-19 system is unbootable. Problem is similar this bug https://bugzilla.kernel.org/show_bug.cgi?id=209177. I try recommended solution mpt3sas.max_queue_depth=1 but nothing helps. Without xen system boots. With xen I must use 5.10.0-18. Regards Dan -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: Supermicro product_name: Super Server product_version: 0123456789 chassis_vendor: Supermicro chassis_version: 0123456789 bios_vendor: American Megatrends Inc. bios_version: 2.2a board_vendor: Supermicro board_name: X11SSL-F board_version: 1.01 ** Network interface configuration: *** /etc/network/interfaces: source /etc/network/interfaces.d/* auto lo iface lo inet loopback iface eno2 inet manual auto xenbr1 iface xenbr1 inet static address 192.168.2.2 netmask 255.255.255.248 gateway 192.168.2.1 bridge_ports eno2 bridge_stp off # disable Spanning Tree Protocol bridge_waitport 0 # no delay before a port becomes available bridge_fd 0 # no forwarding delay iface eno1 inet manual auto xenbr0 iface xenbr0 inet manual bridge_ports eno1 bridge_stp off # disable Spanning Tree Protocol bridge_waitport 0 # no delay before a port becomes available bridge_fd 0 # no forwarding delay iface enp2s0 inet manual auto xenbr2 iface xenbr2 inet manual bridge_ports enp2s0 bridge_stp off # disable Spanning Tree Protocol bridge_waitport 0 # no delay before a port becomes available bridge_fd 0 # no forwarding delay ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5918] (rev 05) Subsystem: Super Micro Computer Inc Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [15d9:089a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: ie31200_edac Kernel modules: ie31200_edac 00:01.0 PCI bridge [0604]: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:13.0 Non-VGA unclassified device []: Intel Corporation 100 Series/C230 Series Chipset Family Integrated Sensor Hub [8086:a135] (rev 31) Subsystem: Super Micro Computer Inc 100 Series/C230 Series Chipset Family Integrated Sensor Hub [15d9:089a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel modules: intel_ish_ipc 00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI]) Subsystem: Super Micro Computer Inc 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [15d9:089a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:14.2 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem [8086:a131] (rev 31) Subsystem: Super Micro Computer Inc 100 Series/C230 Series Chipset Family Thermal
