Your message dated Fri, 11 Nov 2022 16:22:27 +0100 (CET) with message-id <20221111152227.9216cbe2...@eldamar.lan> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #906052, regarding linux-image-4.17.0-1-armmp: Compex WLE900VX (ath10k) doesn't probe to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 906052: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=906052 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: src:linux Version: 4.17.8-1 Severity: normal Dear Maintainer, The Compex pci express wifi module fails to probe apparently because it isn't waking up. I can't see anything wrong here, and the module used to work with older (vendor) kernels. Any clues what is going on? Yours sincerely Josua Mayer -- Package-specific info: ** Version: Linux version 4.17.0-1-armmp (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-26)) #1 SMP Debian 4.17.8-1 (2018-07-20) ** Command line: console=ttyS0,115200 log_level=7 ** Not tainted ** Kernel log: [ 4.416771] xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000 [ 4.422722] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 4.431024] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.438269] usb usb4: Product: xHCI Host Controller [ 4.443161] usb usb4: Manufacturer: Linux 4.17.0-1-armmp xhci-hcd [ 4.449273] usb usb4: SerialNumber: f10f8000.usb3 [ 4.454319] hub 4-0:1.0: USB hub found [ 4.458105] hub 4-0:1.0: 1 port detected [ 4.462249] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 4.467591] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 [ 4.475109] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed [ 4.481601] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.489774] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17 [ 4.498067] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.505312] usb usb5: Product: xHCI Host Controller [ 4.507447] libphy: mv88e6xxx SMI: probed [ 4.510205] usb usb5: Manufacturer: Linux 4.17.0-1-armmp xhci-hcd [ 4.510210] usb usb5: SerialNumber: f10f8000.usb3 [ 4.525199] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00 [ 4.531163] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.537424] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 4.538185] hub 5-0:1.0: USB hub found [ 4.543750] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 4.547530] hub 5-0:1.0: 1 port detected [ 4.554399] ata1.00: ATA-10: 32GB SATA Flash Drive, SFPS925A, max UDMA/133 [ 4.565229] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.573566] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.579734] pci 0000:00:02.0: [11ab:6828] type 01 class 0x060400 [ 4.579934] pci 0000:00:03.0: [11ab:6828] type 01 class 0x060400 [ 4.581309] PCI: bus0: Fast back to back transfers disabled [ 4.586922] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.594958] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.603149] ata1.00: configured for UDMA/133 [ 4.607484] pci 0000:01:00.0: [168c:003c] type 00 class 0x028000 [ 4.607516] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 4.607542] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 4.607632] pci 0000:01:00.0: supports D1 D2 [ 4.607759] scsi 0:0:0:0: Direct-Access ATA 32GB SATA Flash 925A PQ: 0 ANSI: 5 [ 4.607790] pci 0000:00:02.0: ASPM: current common clock configuration is broken, reconfiguring [ 4.624813] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 4.632799] sd 0:0:0:0: [sda] Write Protect is off [ 4.637615] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.637642] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.647734] sda: sda1 sda2 sda3 < sda5 > [ 4.652559] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.658927] PCI: bus1: Fast back to back transfers enabled [ 4.664475] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.665827] PCI: bus2: Fast back to back transfers enabled [ 4.671365] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 4.671391] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff] [ 4.678247] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit] [ 4.685609] pci 0000:01:00.0: BAR 0: error updating (0xe0000004 != 0xffffffff) [ 4.692890] pci 0000:01:00.0: BAR 0: error updating (high 0x000000 != 0xffffffff) [ 4.700416] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0200000-0xe020ffff pref] [ 4.706967] random: fast init done [ 4.707688] pci 0000:00:02.0: PCI bridge to [bus 01] [ 4.716066] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xe02fffff] [ 4.722883] pci 0000:00:03.0: PCI bridge to [bus 02] [ 4.730477] pcieport 0000:00:02.0: enabling device (0140 -> 0142) [ 5.339193] Marvell 88E1540 mv88e6xxx-0:00: attached PHY driver [Marvell 88E1540] (mii_bus:phy_addr=mv88e6xxx-0:00, irq=64) [ 5.431158] Marvell 88E1540 mv88e6xxx-0:01: attached PHY driver [Marvell 88E1540] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=65) [ 5.521407] Marvell 88E1540 mv88e6xxx-0:02: attached PHY driver [Marvell 88E1540] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=66) [ 5.613400] Marvell 88E1540 mv88e6xxx-0:03: attached PHY driver [Marvell 88E1540] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=67) [ 5.705399] Marvell 88E1540 mv88e6xxx-0:04: attached PHY driver [Marvell 88E1540] (mii_bus:phy_addr=mv88e6xxx-0:04, irq=68) [ 5.727761] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL) [ 5.738466] DSA: tree 0 setup [ 5.824674] PM: Image not found (code -22) [ 5.932270] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 6.128816] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.150428] systemd[1]: Detected architecture arm. [ 6.172937] systemd[1]: Set hostname to <clearfog>. [ 6.378459] random: systemd: uninitialized urandom read (16 bytes read) [ 6.385356] systemd[1]: Listening on Journal Audit Socket. [ 6.404795] random: systemd: uninitialized urandom read (16 bytes read) [ 6.411699] systemd[1]: Listening on udev Control Socket. [ 6.432818] random: systemd: uninitialized urandom read (16 bytes read) [ 6.439629] systemd[1]: Listening on udev Kernel Socket. [ 6.460880] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.485013] systemd[1]: Listening on Journal Socket. [ 6.508021] systemd[1]: Starting udev Coldplug all Devices... [ 6.531097] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.721307] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.109289] systemd-journald[215]: Received request to flush runtime journal from PID 1 [ 7.396739] orion_wdt: Initial timeout 171 sec [ 7.460748] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.696587] marvell-cesa f1090000.crypto: CESA device successfully registered [ 7.818741] ath10k_pci 0000:01:00.0: of_irq_parse_pci: failed with rc=134 [ 7.844739] ath10k_pci 0000:01:00.0: Refused to change power state, currently in D3 [ 7.882641] ath10k_pci 0000:01:00.0: failed to wake up device : -110 [ 7.891012] ath10k_pci: probe of 0000:01:00.0 failed with error -110 [ 8.095389] Adding 998396k swap on /dev/sda5. Priority:-2 extents:1 across:998396k SSFS [ 8.234962] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 8.245236] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 8.485309] mvneta f1070000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] [ 8.494243] mvneta f1070000.ethernet eth0: configuring for phy/rgmii-id link mode [ 8.503770] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.673445] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.681504] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 313.920370] random: crng init done [ 313.925220] random: 7 urandom warning(s) missed due to ratelimiting ** Model information Hardware : Marvell Armada 380/385 (Device Tree) Revision : 0000 Device Tree model: SolidRun Clearfog A1 ** Loaded modules: ath10k_pci ath10k_core ath mac80211 cfg80211 rfkill marvell_cesa des_generic sg orion_wdt spi_orion evdev ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sd_mod mv88e6xxx dsa_core bridge stp llc devlink gpio_pca953x ehci_orion ehci_hcd xhci_plat_hcd sdhci_pxav3 sdhci_pltfm xhci_hcd marvell sdhci ahci_mvebu libahci_platform libahci libata scsi_mod mvmdio usbcore mvneta phylink i2c_mv64xxx ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 532 link/ether d2:63:b4:fb:4f:8a brd ff:ff:ff:ff:ff:ff inet 192.168.1.138/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fd9e:cdca:47d1:0:d063:b4ff:fefb:4f8a/64 scope global dynamic mngtmpaddr valid_lft forever preferred_lft forever inet6 fe80::d063:b4ff:fefb:4f8a/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 532 link/ether d2:63:b4:fb:4f:8b brd ff:ff:ff:ff:ff:ff 4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 532 link/ether d2:63:b4:fb:4f:8c brd ff:ff:ff:ff:ff:ff 5: lan5@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether d2:63:b4:fb:4f:8b brd ff:ff:ff:ff:ff:ff 6: lan4@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether d2:63:b4:fb:4f:8b brd ff:ff:ff:ff:ff:ff 7: lan3@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether d2:63:b4:fb:4f:8b brd ff:ff:ff:ff:ff:ff 8: lan2@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether d2:63:b4:fb:4f:8b brd ff:ff:ff:ff:ff:ff 9: lan1@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether d2:63:b4:fb:4f:8b brd ff:ff:ff:ff:ff:ff 10: lan6@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether d2:63:b4:fb:4f:8b brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lan2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lan4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lan1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lan5: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lan6: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 522101 529 0 0 0 0 0 0 173501 373 0 0 0 0 0 0 lan3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ** PCI devices: 00:02.0 PCI bridge [0604]: Marvell Technology Group Ltd. Device [11ab:6828] (rev 04) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e0000000-e02fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:03.0 PCI bridge [0604]: Marvell Technology Group Ltd. Device [11ab:6828] (rev 04) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 01:00.0 Network controller [0280]: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter [168c:003c] (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel modules: ath10k_pci ** USB devices: Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: armhf (armv7l) Kernel: Linux 4.17.0-1-armmp (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.17.0-1-armmp depends on: ii initramfs-tools [linux-initramfs-tool] 0.132 ii kmod 25-1 ii linux-base 4.5 Versions of packages linux-image-4.17.0-1-armmp recommends: pn apparmor <none> pn firmware-linux-free <none> pn irqbalance <none> Versions of packages linux-image-4.17.0-1-armmp suggests: pn debian-kernel-handbook <none> pn linux-doc-4.17 <none> Versions of packages linux-image-4.17.0-1-armmp is related to: pn firmware-amd-graphics <none> ii firmware-atheros 20180518-1 pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
