-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have the same problem on a 600E-2645-4AU.
The solution was to build pcmcia-cs with the -pnp option, so that lspnp/setpnp worked.
Then, I can use setpnp to change these without having to boot into Losedoze or DOS.
I've also just pulled out the pnp-related files from pcmcia-cs, and built a pnpbios.o
module that just does the pnp stuff only, so setpnp can work. Haven't made a Debian
package ofthis thing but if you want it let me know and I can post it somewhere.
- -ken
- ---
On Mon, Jun 09, 2003 at 11:24:09AM -0700, Kris wrote:
> I have an IBM ThinkPad 600 and currently I have to use the windows utility to
> disable the IR port and enable the serial
> port. Once in a great while on reboot the system will restore it's bios settings
> back to default and the IR port is
> turned back on. I then have to go through the process again of setting up the
> windows partition again. I have tpctl
> and ThinkPad base but the power says error. Below are the readouts for tpctl --rsx
> the top is working serial the bottom
> is working IR no serial. Please assist
>
> com1 on
> resource state:ioaddr irq# able? mode/power
>serial port 1: 0x3f8 IRQ4 enable on
>serial port 2: 0x0 IRQ0 disable
>
>
> com1 off
> resource state:ioaddr irq# able? mode/power
>serial port 1: 0x0 IRQ0 disable (error)
>serial port 2: 0x3f8 IRQ4 enable
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
- --
- ---
The world's most affordable web hosting.
http://www.nearlyfreespeech.net
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE+9Bpxe8HF+6xeOIcRArvxAKD6AYZYO37XW5NpY+Vvzup7VzXX4QCg7Rxr
0zoxKZdwSexoxrV0VbANynE=
=ZsHj
-END PGP SIGNATURE-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
