Re: Xinerama on i810 -> HELP plz
dude, try to put in the two monitors the VertRefresh and HorizSync in max. some like HorizSync 31-180 and VertRefresh 56-120 and change the Depth 16 or 24, do not put the max depth ;) its work for me :D On 8/9/05, Markus <[EMAIL PROTECTED]> wrote: Hi,I read your comment to conifure the xorg.conf in folder /etc/X11/; andhopfully you can give me some advise.My Dell PC is build up with the chipset Intel 810 with integratedgraphic card 915 G. This graphic-card has in addition to the onboard (analog) output a external DVI card (digtital output). First I had acloned signal on both monitors. But for a good "working atmosphere" :)I reconfigured my xorg.conf to get an expanded desktop environment. My Problem now: before initializing the hardware I still have a signalon both monitors, but afterwards, the digital output (DVI, -> TFT) is dead.Please I'm begging you for HELP!here is the graphic section out of my xorg.conf:(for my it seems to be right, perhaps I forgot to install an newerversion of X or additional packages? I use SUSE9.3)/Section "Monitor" Option "DPMS" DisplaySize 386 290 HorizSync31-80 Identifier "Monitor digital" VertRefresh 56-76 UseModes "Modes[0]"EndSectionSection "Monitor" Option "DPMS" DisplaySize 305 229 HorizSync27-96 Identifier "Monitor analog" VertRefresh 50-160 UseModes "Modes[1]"EndSectionSection "Modes" Identifier "Modes[0]" Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 10281066 +HSync +VSyncEndSectionSection "Modes" Identifier "Modes[1]" Modeline "1280x1024" 105.15 1280 1360 1496 1712 1024 1025 1028 1059 Modeline "1280x1024" 125.14 1280 1368 1504 1728 1024 1025 1028 1065 Modeline "1280x1024" 145.69 1280 1376 1512 1744 1024 1025 1028 1071 Modeline "1280x1024" 165.29 1280 1376 1512 1744 1024 1025 1028 1077 Modeline "1280x960" 97.68 1280 1352 1488 1696 960 961 964 993 Modeline "1280x960" 116.18 1280 1360 1496 1712 960 961 964 998 Modeline "1280x960" 135.32 1280 1368 1504 1728 960 961 964 1004 Modeline "1280x960" 155.01 1280 1376 1512 1744 960 961 964 1010 Modeline "1280x960" 164.30 1280 1376 1512 1744 960 961 964 1013 Modeline "1280x800" 80.58 1280 1344 1480 1680 800 801 804 827 Modeline "1280x800" 95.95 1280 1352 1488 1696 800 801 804 832 Modeline "1280x800" 111.77 1280 1360 1496 1712 800 801 804 837 Modeline "1280x800" 128.04 1280 1368 1504 1728 800 801 804 842 Modeline "1280x800" 144.76 1280 1376 1512 1744 800 801 804 847 Modeline "1280x800" 160.48 1280 1376 1512 1744 800 801 804 852 Modeline "1280x800" 165.13 1280 1376 1512 1744 800 801 804 853 Modeline "1280x768" 77.37 1280 1344 1480 1680 768 769 772 794 Modeline "1280x768" 92.15 1280 1352 1488 1696 768 769 772 799 Modeline "1280x768" 107.23 1280 1360 1496 1712 768 769 772 803 Modeline "1280x768" 122.87 1280 1368 1504 1728 768 769 772 808 Modeline "1280x768" 137.68 1280 1368 1504 1728 768 769 772 813 Modeline "1280x768" 154.07 1280 1376 1512 1744 768 769 772 818 Modeline "1280x768" 164.66 1280 1376 1512 1744 768 769 772 821 Modeline "1152x864" 78.82 1152 1216 1336 1520 864 865 868 894 Modeline "1152x864" 93.90 1152 1224 1344 1536 864 865 868 899 Modeline "1152x864" 109.43 1152 1224 1352 1552 864 865 868 904 Modeline "1152x864" 125.43 1152 1232 1360 1568 864 865 868 909 Modeline "1152x864" 140.45 1152 1232 1360 1568 864 865 868 914 Modeline "1152x864" 148.10 1152 1232 1360 1568 864 865 868 917 Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794 Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799 Modeline "1024x768" 86.18 1024 1088 1200 1376 768 769 772 803 Modeline "1024x768" 97.84 1024 1088 1200 1376 768 769 772 808 Modeline "1024x768" 110.91 1024 1096 1208 1392 768 769 772 813 Modeline "1024x768" 122.97 1024 1096 1208 1392 768 769 772 818 Modeline "1024x768" 131.43 1024 1096 1208 1392 768 769 772 821 Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621 Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624 Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628 Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632 Modeline "800x600" 66.71 800 848 936 1072 600 601 604 635 Modeline "800x600" 73.98 800 848 936 1072 600 601 604 639 Modeline "800x600" 82.55 800 856 944 1088 600 601 604 643 Modeline "800x600" 90.10 800 856 944 1088 600 601 604 647 Modeline "800x600" 97.59 800 856 944 1088 600 601 604 650 Modeline "768x576" 33.74 768 792 872 976 576 577 580 596 Modeline "768x576" 40.41 768 800 880 992 576 577 580 599 Modeline "768x576" 47.41 768 808 888 1008 576 577 580 603 Modeline "768x576" 53.75 768 808 888 1008 576 577 580 606 Modeline "768x576" 61.21 768 816 896 1024 576 577 580 610 Modeline "768x576" 67.79 768 816 896 1024 576 577 580 613 Mod
Re: Xinerama on i810
Hi Frans, On Thu, 2005-06-16 at 20:18 +0200, Frans Pop wrote: > > If I'm not mistaken, that's actually an 855, not an 810. And, as I > > understood, the XFree version that comes with Debian does not have very > > good support for it. I had trouble addressing both pipes individually > > (not for Xinerama, but for presentations). I fixed it by using XOrg > > (you can find the right sources.list-entry in the archives). > I have an 855 in my Toshiba as well. I would be very interested in the > config file you are using with XOrg. Sebastian beat me... My "Device" sections are pretty much the same as his. I think the important thing is to put 'BusID "PCI:0:2:0"' in both "Device" sections, and 'Screen 1' in the second one (the 'Screen 0' in the first one is probably optional). I don't use Xinerama, but I think Sebastian does. > The U10 is still running nicely :-) > Will be working on adding 2.6 kernel support to Sparc installation CDs > soon and I'm also working on adding sparc support for os-prober. I'm happy to hear that it isn't gathering dust somewhere. Well, it probably is gathering dust, but as long as it also does other things, the dust gathering is acceptable behaviour :-) Koen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Xinerama on i810
Hi, I had the same problem on my toshiba m30x-148 and yesterday I installed the xserver from x.org and now everything works fine... I installed debian packages for sarge from http://www.debian-desktop.org/ here is my xorg.config: ## GRAPHIC # Section "Device" Identifier "Intel 82852/855GM Intern" Driver "i810" BusID "0:2:0" Screen 0 Option "MonitorLayout" "CRT, CRT+LFP" EndSection Section "Device" Identifier "Intel 82852/855GM Extern" Driver "i810" BusID "0:2:0" Screen 1 Option "MonitorLayout" "CRT, CRT+LFP" Option "DevicePresence" "yes" EndSection Section "Monitor" Identifier "LCD Intern" Option "DPMS" HorizSync 28-49 VertRefresh 43-72 #ModeLine "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828 EndSection Section "Monitor" Identifier "LCD Extern" Option "DPMS" HorizSync 28-49 VertRefresh 43-72 EndSection Section "Screen" Identifier "Intern" Device "Intel 82852/855GM Intern" Monitor "LCD Intern" DefaultDepth24 SubSection "Display" Depth 1 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" "1280x800" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "Extern" Device "Intel 82852/855GM Extern" Monitor "LCD Extern" DefaultDepth24 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection ## END GRAPHIC Section "ServerLayout" Identifier "Default Layout" Screen 0 "Intern" Screen 1 "Extern" RightOf "Intern" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" Option "Xinerama""true" EndSection Regards Sebastian Felix Obenhuber schrieb: Hi, Take care, activating Xinerama disables DRI support. cheers Felix On Thu, 2005-06-16 at 19:59 +0200, Zsolt Rizsanyi wrote: On Thursday 16 June 2005 18.59, cameron byrne wrote: I am having major trouble getting Xinerama to work on my Dell Laptop, Latitude 100L You might have more luck with using X.org instead of XFree86. One place to get X.org for debian is: # xorg for debian deb http://neo.wh-stuttgart.de/debian sarge xorg deb-src http://neo.wh-stuttgart.de/debian sarge xorg Regards, Zsolt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Xinerama on i810
Hi, Take care, activating Xinerama disables DRI support. cheers Felix On Thu, 2005-06-16 at 19:59 +0200, Zsolt Rizsanyi wrote: > On Thursday 16 June 2005 18.59, cameron byrne wrote: > > I am having major trouble getting Xinerama to work on > > my Dell Laptop, Latitude 100L > > You might have more luck with using X.org instead of XFree86. > One place to get X.org for debian is: > # xorg for debian > deb http://neo.wh-stuttgart.de/debian sarge xorg > deb-src http://neo.wh-stuttgart.de/debian sarge xorg > > Regards, > Zsolt > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Xinerama on i810
Hi Koen! On Thursday 16 June 2005 19:43, Koen Vermeer wrote: > If I'm not mistaken, that's actually an 855, not an 810. And, as I > understood, the XFree version that comes with Debian does not have very > good support for it. I had trouble addressing both pipes individually > (not for Xinerama, but for presentations). I fixed it by using XOrg > (you can find the right sources.list-entry in the archives). I have an 855 in my Toshiba as well. I would be very interested in the config file you are using with XOrg. Cheers, Frans P.S. [OT] The U10 is still running nicely :-) Will be working on adding 2.6 kernel support to Sparc installation CDs soon and I'm also working on adding sparc support for os-prober. pgpIlal2Jx4ss.pgp Description: PGP signature
Re: Xinerama on i810
If I'm not mistaken, that's actually an 855, not an 810. And, as I understood, the XFree version that comes with Debian does not have very good support for it. I had trouble addressing both pipes individually (not for Xinerama, but for presentations). I fixed it by using XOrg (you can find the right sources.list-entry in the archives). Koen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Xinerama on i810
On Thursday 16 June 2005 18.59, cameron byrne wrote: > I am having major trouble getting Xinerama to work on > my Dell Laptop, Latitude 100L You might have more luck with using X.org instead of XFree86. One place to get X.org for debian is: # xorg for debian deb http://neo.wh-stuttgart.de/debian sarge xorg deb-src http://neo.wh-stuttgart.de/debian sarge xorg Regards, Zsolt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
