On Tue, 2003-09-09 at 01:47, Michel Dänzer wrote:
On Mon, 2003-09-08 at 06:52, Soeren Sonnenburg wrote:
I just realized that the daily updatedb run caused this 1G Ti 15
powerbook to swap (with just some apps open under X).
BTW, 2.6 kernels handle this much better than 2.4 kernels. :)
On Tue, 2003-09-09 at 10:40, John M. Gabriele wrote:
I'm trying to get hardware-accelerated OpenGL working. The Powerbook
comes with an ATI Rage 128 Mobility M3, 66 MHz AGP 2x (rev. 02) bus
and the card has 8 MB SDRAM. Standard 1024x768 display.
I've got some info up about the iBook (with same
Hi there,
first I´m using 2.4.22-pre4-ben0 with dmasound on my Powerbook G4 1GHz.
(yes I should update, i will, soon...)
If I change the cpu frequency often while playing music, the dmasound
hangs until I reboot. Killing all processes that use /dev/dsp doesn´t
help. I cannot unload the dmasound
On Tue, 2003-09-09 at 00:04, Julien BLACHE wrote:
Stewart Smith [EMAIL PROTECTED] wrote:
Are you getting a message like keyboard: unknown scancode e0 4c on
your console/in your syslog?
Exactly.
Try the attached patch, should apply to 2.4.22 too.
i haven't actually tried it,
On Sat, Sep 06, 2003 at 12:07:53PM +0200, Mich Lanners wrote:
On 3 Sep, this message from J. Javier Maestro echoed through
cyberspace:
On Sep Tue 02 2003 09:49, William Crowshaw wrote:
Oh, by the way, the fixed worked on my G3 upgrade
card. Here's my /proc/cpuinfo
cpu :
On Tue, Sep 09, 2003 at 13:15:41 +0200, Michael Schmitz wrote:
The buttons worked all the time. You just get rid of the warning message
(and perhaps stop the keyboard driver from passing on the brightness key
events to userland).
With 2.4.21, they never worked on my PowerBook (bug 202602).
Did
This one time, at band camp, Michael Flaig wrote:
If I change the cpu frequency often while playing music, the dmasound
hangs until I reboot. Killing all processes that use /dev/dsp doesn´t
help. I cannot unload the dmasound modules, because the kernel says
they´re still in use ...
Ah, I was
On Tue, 2003-09-09 at 10:40, John M. Gabriele wrote:
I'm trying to get hardware-accelerated OpenGL working. The Powerbook
comes with an ATI Rage 128 Mobility M3, 66 MHz AGP 2x (rev. 02) bus
and the card has 8 MB SDRAM. Standard 1024x768 display.
I've got some info up about the iBook (with same
Sven,
As far as booting, that did the job!! Thanks. After I go through the
install and reboot, it will not reboot. I have to boot net again, and none
of the drives get mounted. (You were right about the kernel install being
manual), How do I move it over from the bootp server? And do I now
Hi Michel,
On Sat, Aug 23, 2003 at 01:24:57AM +0200, Michel Dänzer wrote:
Are you aware of the dmasound bug where opening the device for reading
makes it unusable until the module is unloaded, for which I recently
posted a patch?
Thanks for your patch! I applied it on top of 2.4.22-ben2 and
On Tue, Sep 09, 2003 at 09:13:53AM -0500, Alumbaugh, Tony wrote:
Sven,
As far as booting, that did the job!! Thanks. After I go through the
install and reboot, it will not reboot. I have to boot net again, and none
of the drives get mounted. (You were right about the kernel install being
On Tue, 2003-09-09 at 16:55, John M. Gabriele wrote:
On Tue, 2003-09-09 at 10:40, John M. Gabriele wrote:
I'm trying to get hardware-accelerated OpenGL working. The Powerbook
comes with an ATI Rage 128 Mobility M3, 66 MHz AGP 2x (rev. 02) bus
and the card has 8 MB SDRAM. Standard 1024x768
On 9 Sep, this message from W. Crowshaw echoed through cyberspace:
On Sat, Sep 06, 2003 at 12:07:53PM +0200, Mich Lanners wrote:
On 3 Sep, this message from J. Javier Maestro echoed through
cyberspace:
On Sep Tue 02 2003 09:49, William Crowshaw wrote:
Oh, by the way, the fixed worked on
Hi!
Anybody out here tried lyx 1.3.2 with KDE on woody? I compiled it by myself
and when I start it I get imediately a SIGSEV with the following stacktrace:
#0 0x0f53abb8 in free () from /lib/libc.so.6
#1 0x0f53ab54 in free () from /lib/libc.so.6
#2 0x1002b960 in
Am Dienstag, 9. September 2003 08:21 schrieb Stewart Smith:
On Tue, 2003-09-09 at 10:40, John M. Gabriele wrote:
I'm trying to get hardware-accelerated OpenGL working. The Powerbook
comes with an ATI Rage 128 Mobility M3, 66 MHz AGP 2x (rev. 02) bus
and the card has 8 MB SDRAM. Standard
Hi,
for my s3 video card I need XFree 3.6 because XFree = 4 hasn't support for
it.
Ok, so I did this under Debian Woody (computer: Motorala Powerstack 300 MHz):
ppc:~# apt-get -s install xserver-s3
Reading Package Lists... Done
Building Dependency Tree... Done
Package xserver-s3 has no
On Tue, 9 Sep 2003, Martin Kuball wrote:
Hi!
Anybody out here tried lyx 1.3.2 with KDE on woody? I compiled it by myself
and when I start it I get imediately a SIGSEV with the following stacktrace:
#0 0x0f53abb8 in free () from /lib/libc.so.6
#1 0x0f53ab54 in free () from /lib/libc.so.6
Michel Dnzer wrote:
On Tue, 2003-09-09 at 16:55, John M. Gabriele wrote:
On Tue, 2003-09-09 at 10:40, John M. Gabriele wrote:
I'm trying to get hardware-accelerated OpenGL working. The Powerbook
comes with an ATI Rage 128 Mobility M3, 66 MHz AGP 2x (rev. 02) bus
and the card has 8 MB SDRAM.
Hi
I did a long deferred update (due to heavy lack of time), which also
updated console-common to version 0.7.26, and after reboot, the console
keymap was messed up (feels like some us keymap or something similar).
During update, console-common mentioned something about keymap to
install: NONE
19 matches
Mail list logo
