hi,
on my tibook IV I kind of lost 3d accelleration since I upgraded xorg
to 6.9.0 ...
lspci:
VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [FireGL 9000]
(rev 01)
(this is the 64mb version)
[EMAIL PROTECTED]:~$ glxinfo /dev/null
libGL: XF86DRIGetClientDriverName: 5.0.3 r200
Hi peter,
I read:
this is a bit complicated, due to big/little endian issues, perhaps.
I am trying to load the firmware into my hdsp pcmcia card.
what kernel version are you using ? I think there was an endianness bug
in alsa some time ago, but it should have been at least fixed in the
sources
hi,
Is it possible to run a tv card on debian ppc?
yes I used a wintv in my beige g3 without problems
on my powerbook I use a wintv usb see http://usbvision.sf.net/
Whatch TV in full screen mode?
yes (xawtv, mplayer etc...)
record tv to disc?
I use mencoder like this:
mencoder -oac
I read:
problems after upgrading my RAM to 768 from 256MB. I used a module
.
.
Probably the ram you bought is faulty. Since I don't know of anything
like http://www.memtest86.com/ for ppc you probably should put the
module in a x86 box and run memtest to see for yourself.
regards,
x
--
I read:
Anyways, I wonder if you guys might could do me one
more favor. When I do start X, the screen is
flickering and is displayed in very strange colors.
The mouse cursor is wavy as if it were underwater.
Trippy, but useless. :-)
sounds like you are lacking some modules, I have the
hi everybody,
I read:
Maybe XATTR is broken somehow in 2.6.3-ben2?
don't know but switching it off didn't change anything, so I try again:
2.6.3-ben2 on my tibook 800 stops with the following messages (hda, hdc
are detected just fine):
VFS cannot open root device hda4 unknown block(0,0)
I read:
2.6.3-ben2.config:194 CONFIG_BLK_DEV_IDEDISK=m
IMHO this must read y, as the modules are available only after
damn! I knew it was sth obvious I missed ...
2.6.3-ben2.config:103 CONFIG_PREEMPT=y
You better disable preempt, it's not stable (on pcc) yet and causes
all kinds of
hi,
I rsynced today (around noon CET) and although I'm pretty sure I configured
everything ok (even with make oldconfig from my 2.6.0-ben2 that is working
fine) the kernel fails to mount my root fs (which is ext3).
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
any hints ?
thanks,
x
--
[EMAIL
hi,
I have problems running fltk code that uses opengl (opengl hw rendering
works fine otherwise) so my question (probably to michel) is this a known
issue with mesa and the dri trunk ?
Are there any packages I'm missing to get fltk/opengl to work ?
should I just build fltk from source ?
thanks,
I read:
I've never heard of this before; maybe if you provided a little more
specific information...
I'm trying to get http://www.pawfal.org/Software/fluxus/ to run on my
powerbook, but it complained about insufficient GL support so I tried
some of the GL examples in the fltk1-examples package
hi,
I'm trying (again) to get 2.4.23-benh (rsynced) to build (with lowlat
preemption patches) but make-kpkg fails with:
/usr/share/kernel-package/rules:381: *** extraneous `endif'. Stop.
(actually already make-kpkg clean)
anybody has ever seen this ?
regards,
x
--
[EMAIL PROTECTED]
I wrote:
[...]
/usr/share/kernel-package/rules:381: *** extraneous `endif'. Stop.
removed the endif, now it seems to work but:
cp: cannot stat `arch/ppc/boot/images/vmlinux.coff': No such file or directory
damn!
regards,
x
--
[EMAIL PROTECTED] Postmodernism is german romanticism
I read:
I suppose you wouldn't listen to me giving you a lecture on the
arcade/console emulators, so I won't. I'll just say that several
what do mean the crossdevelopment lecture ?
of those have never been successfully emulated on a desktop
computer.
the small ones and the old ones work
I read:
I installed alsa from source but I have no sound. If I launch
alsamixer I can't change the volume in PC Speak. I didn't find any
.
.
did you try pressing 'M' (mute/unmute) on the master channel ?
(sorry if this was just too obvious)
regards,
x
--
[EMAIL PROTECTED]
hi,
searching the web and talking to people rt and irc I get lots of
contradicting info ranging from it should just work via you
need to reboot to osx and back to no way mate, for now I find
myself in the no-way department but I'd really love to get this
working (Xfree dualhead would be great,
hi,
I'm trying to get 2.4.23 benh (rsynced) running with michel's drm trunk
modules but I had no success yet:
co:~# depmod -ae
depmod: *** Unresolved symbols in
/lib/modules/2.4.23-pre5-ben0/kernel/drivers/char/drm/mga.o
depmod: vmalloc_start
depmod: *** Unresolved symbols in
I read:
what is your machine and do you have agp support in kernel or in
module (loaded) ?
powerbook g4 867, agp loads fine see michel's post
regards,
x
--
[EMAIL PROTECTED] Postmodernism is german romanticism with better
http://pilot.fm/special effects. (Jeff Keuss / via
hi,
I read:
Any DVD to DivX software for LinuxPPC?
http://www.bunkus.org/dvdripping4linux/single/
mencode and transcode work like a charm, dvd::rip works
and makes the job very easy (though you have to build the
latter two from source, but it's painless)
An DivX player?
mplayer get it here
hi,
I'm trying to get xfree86 (the dri trunk) running on my
g4 / 867 /radeon9000 15 powerbook but as soon as I type
startx I get weird stripes some plasma anim/lava lamp look
on the display and I have to reboot using the power button ...
doesn't sound too good ...
OSX works ...
any hints ?
x
I read:
I think it is OK to support Free Software on MacOS X. GNU has for a
yes definitely it's perfectly ok to support everything that's out there,
and I really like the idea that I can show off my favourite piece of sw
on windos or macosx I just feel that the user communities of these oses
I read:
The web site is i386 only. I didn't check, but most probably the
flashplugin package is also i386 only, that is why you are not finding
him.
the official flash plugin for linux is definitely i386 only, at least on
macromedias website, and I'd guess that's what's in the debs.
I
I read:
Just want to point the obvious: They have a powerpc plugin that works
perfectly under MacOS-X. So basically that's nearly a zero-effort for them
to provide the community a linux/powerpc binary.
which raises another question, since macosx leeches GNU energies by flooding
free sw
I read:
Now, on the other hand, make sure your printer connection is _really_
Localtalk; I think I remember some of the Epson's simply running a
serial connection at some very high speed (like 230 kb/s or so...).
sorry I was obviously mixing up cables and protocols here , it's what
I
hi,
so my beige g3 is now booting hda from floppy, it acts as a gateway
for my cable modem running udhcpd on the inner interface, xawtv works
fine and I'm diving into ppc assembly (and maybe fix alsaplayers cdda
endianess bug if I can find time to do it) ...
Now I'd like to set it up as a
I read:
Right. When I saw this mail this afternoon at work however I checked his
boot device; it _should_ be OK (I thought I remembered some alias
and I tried _lots_ of variations all I get is either just
can't OPEN:
or
can't OPEN: /some/thing/[EMAIL PROTECTED]
The advice I can offer is
hi,
I have an oldworld g3, original mac keyboard and I can't get the german
keyboard to work properly (no '@', '~', '|')
Actually _all_ the right hand modifiers don't work but:
dumpkeys (looking for 'Shift')
shows that 42 (working Shift_L) is there and 54 (which showkey reports
when I press
I might also add that shift_r is working fine in open firmware,
it's _not_ the keyboard ;)
--
[EMAIL PROTECTED] Postmodernism is german romanticism with better
http://pilot.fm/special effects. (Jeff Keuss / via ctheory.com)
hi pedro,
I read:
Debian on the imac tomorrow - just a quick question, will it be able to
recognise my USB CD Burner, as well as all the sound files I have already
well it depends basically it should work using usb-storage and sr_mod
you can always look your device up here
hi,
I recently snapped up a beige g3 (233MHz,of2.0f1,160Mb Ram, no hd)
for 50EUR and found an unused 800Mb ide drive I try to install debian
(3.0.23) on. I read all the docs and archives I could find (hell I
even dug up my forth reference...) but
I can't get it to boot from the HD so I have a
I read:
Is there a document describing how to make a hsf floppy on linux
to boot it with a rescue kernel (the hsf install disk won't let
me choose an alternate root file system) ?
http://cvs.debian.org/powerpc-specials/miBoot/patch-floppy-image.pl
ok so now I can boot the system off the
I wrote:
ok so now I can boot the system off the floppy how would I make
a new one to use a custum kernel ?
sorry found it ...
# mnt -t clue /dev/rtfm /mnt/brain
regards,
x
--
[EMAIL PROTECTED] Postmodernism is german romanticism with better
http://pilot.fm/special effects.
31 matches
Mail list logo