with a JFS root filesystem and
an ext2 /boot, and it works just fine. I didn't install it just recently
(it's probably been 2+ years since I installed it, actually). I can tell
you that it does work, at least.
--
Derrik Pates
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
hfsutils) for
loading the bootstrap. OF doesn't know any Linux-specific filesystems,
so you definitely won't be able to boot from it. Did you make a separate
bootstrap partition for yaboot's use? If not, you need one.
--
Derrik Pates
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
?
No.
--
Derrik Pates
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
is not an early iBook or G3 bluewhite tower), select the
cute penguin, and boot into Linux, then rerun ybin?
--
Derrik Pates
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
that had
dual processors from the factory, so MP-safety most certainly is an
issue. Besides, he said he was testing it on an SMP box anyway - it'd
be hard to get a SWIM3 floppy controller on a NewWorld, since the core
chipsets in the NewWorlds don't have 'em.
--
Derrik Pates
[EMAIL PROTECTED
the former at this point, as devfs is considered
deprecated). The fact that the gettys aren't staying running is because
they can't open tty[1-6], because devfs doesn't call them by those
names; devfsd adds symlinks that point to vc/*, but I've phased that out
on my PowerBook and G3 BW.
--
Derrik
I've run Debian on mine since I got it, and I've run Debian on a
G3 previously, and it's never given me any trouble.
--
Derrik Pates
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
in the list, assuming mysqld is
running and has set up the UNIX domain socket (which it should by default).
Maybe it's using /etc/mysql/my.cnf from your old install, and it contains
a path to the wrong location for the UNIX domain socket.
--
Derrik Pates
[EMAIL PROTECTED]
--
To UNSUBSCRIBE
package (so that the initrd gets rebuilt), it should work.
It's not a foolproof answer, and it could be easier, but it can be made
to work; I was fortunately able to make use of it, so my Powerbook was
still useful while I waited for a new internal drive.
--
Derrik Pates
[EMAIL PROTECTED
a chip known as planb that's
used for video input, and the traditional AWACS chip/driver is used for
audio input. Take a look and see if the distribution you're using
includes a kernel module called planb, or if you build your own
kernel, enable it in the kernel build.
--
Derrik Pates
[EMAIL
folder? ) on this system is:
Oh... you didn't install it the proper way. If it's in the FS root, try:
boot hd:,\yaboot
instead, and see if it manages to boot.
--
Derrik Pates
[EMAIL PROTECTED]
. You should do 'boot hd:,\\yaboot' instead. Not specifying a
partition number will cause it to search for a volume with a filesystem
it knows, and \\ tells it look in the blessed directory - which trust
me, is important...
--
Derrik Pates
[EMAIL PROTECTED]
instructions.
I ran into that on my Pismo (not a G4, mind you) with an earlier
version, but to my knowledge IBM fixed that issue. I've run jBuilder on
top of it (with a couple class packs stolen from a Sun 1.4.2 JDK for
x86), and it works as fine as Java software ever does.
--
Derrik Pates
, but they seem to be having problems with the company they're
contracting with - I've been waiting for 2 months. Once they get that
straightened out though, I'm looking forward to having a 900 MHz Pismo -
with CPU frequency scaling, no less, and a 1 MB on-die L2 cache. Yummy.
--
Derrik Pates
[EMAIL
Elimar Riesebieter wrote:
dmesg -n1 is doing the job. But isn't it possible to put that option
to an initscript other than rcboot.local? man syslogd doesn`t show
an equal solution.
man klogd
--
Derrik Pates
[EMAIL PROTECTED]
, similar to the graphical boot selector
you get by holding the Option key at boot.
--
Derrik Pates
[EMAIL PROTECTED]
, www.netbsd.org might be more
appropriate for you.
--
Derrik Pates
[EMAIL PROTECTED]
controllers that Darwin/i386 actually can use? :) Its
hardware support on i386 is horribly anemic; and the hardware it _does_
use, it uses obscure features of, making virtualization solutions like
VMware not work. Though Darwin/i386 does run (though slowly) under qemu...
--
Derrik Pates
[EMAIL
was released about a week ago - you might try
those and see how they work for you.
--
Derrik Pates
[EMAIL PROTECTED]
.
--
Derrik Pates
[EMAIL PROTECTED]
be _extremely_ minimal).
--
Derrik Pates
[EMAIL PROTECTED]
substantially between
woody and sarge), so even if you just ask for that one package, you'll
probably have to install a signficant number of other packages. In that
case, you might check www.apt-get.org, or just consider upgrading to
sarge (it should be the new stable RSN).
--
Derrik Pates
[EMAIL
the ramdisk.
--
Derrik Pates
[EMAIL PROTECTED]
if
you decide to do it and need assistance.
--
Derrik Pates
[EMAIL PROTECTED]
policies on how yaboot should be used, because of all
the bogus problem reports and make it work! e-mails I'm sure he's
received in the past.
--
Derrik Pates
[EMAIL PROTECTED]
.
--
Derrik Pates
[EMAIL PROTECTED]
to what 'iwlist eth1
scanning' says about the network.
--
Derrik Pates
[EMAIL PROTECTED]
ReiserFS to anybody - mostly because I've known too many people who've
used it (not specifically on PPC, just in general) and had entire
filesystems eaten because of it. It frankly amazes me when people
recommend it, so I try to warn off anyone who asks about it. :)
--
Derrik Pates
[EMAIL
, but I'll have to hand copy it - figured I'd find out first if
it was a known problem or not. This system runs 2.6 kernels that I build
just fie, but they have the CMD64x module built into the kernel instead
of loading a module for it.
--
Derrik Pates
[EMAIL PROTECTED]
didn't do something like that? Maybe try
adding 'devfs=nomount' to the kernel command line when you're booting to
see if that's it.
--
Derrik Pates
Voxel dot Net, Inc.
[EMAIL PROTECTED]
- it assumes 15bpp, and throws the colors way
out of whack.
--
Derrik Pates
[EMAIL PROTECTED]
, does somebody
knows the syntax to boot Sarge installer cdrom from openfirmware ?
You should be able to type:
boot cd:,\\:tbxi
and that should get you going. If not, try:
boot cd:,\\yaboot
instead.
--
Derrik Pates
[EMAIL PROTECTED]
, and a GUI boot selector will
appear. Click the icon for the OS you want to boot, then click the
right-arrow button to proceed.
--
Derrik Pates
Voxel dot Net, Inc.
[EMAIL PROTECTED]
. You have to use an initrd
to do that. I'm guessing you have your own local-built kernel with no
initrd. Sorry, but that just won't work without an initrd...
--
Derrik Pates
[EMAIL PROTECTED]
== NULL) check,
and now I can play audio and an attempted terminal beep won't stall out
audio playback in progress, and the beep returns normally after playback
stops. Other than that, it's nice to have a working terminal beep again.
Thanks for the patch.
--
Derrik Pates
[EMAIL PROTECTED]
- apparently due to both drives trying to respond to
commands. I'd say make sure that, if the drive is on the same ATA bus,
to make sure that it's set as slave. If you don't know what cable select
is for, you should NEVER NEVER NEVER use it!
Just thought my experience might come in useful.
--
Derrik
the author has never heard of big-endian systems). If you
want my patches, let me know.
--
Derrik Pates
[EMAIL PROTECTED]
enough)
have you got? If it's not a system where the display is built into the
logic board/not replaceable, have you upgraded the video card, and if
so, what kind of video card do you have?
--
Derrik Pates
[EMAIL PROTECTED]
it resize ext2 and
ext3 filesystems before, so I'm quite sure about that.
--
Derrik Pates
[EMAIL PROTECTED]
Inspector package installed along with it, if that matters.)
--
Derrik Pates
[EMAIL PROTECTED]
messed up in images? (they turn
yellow/green) I've _only_ noticed this on PowerPC systems, never on an
x86. I don't know if it's a PowerPC or big-endian bug in the image
handling library, and it seems to happen quite irregularly.
--
Derrik Pates
[EMAIL PROTECTED]
Rory Campbell-Lange wrote:
Thanks for the tip. I couldn't find mol-drivers-macosx though:
Do you have 'non-free' in your sources.list along with 'main'? You have
to have it, because the MacOS X support code contains a modified BootX
binary.
--
Derrik Pates
[EMAIL PROTECTED]
)
Yes, this is the eth1394 driver at work.
--
Derrik Pates
[EMAIL PROTECTED]
, I
think that means you can't have yaboot on a DVD with ISO9660 and HFS,
but I'm expecting scripts aren't yet available to make the CD using HFS+.
--
Derrik Pates
[EMAIL PROTECTED]
reversed. If you find a patch that fixes this, send it to the
maintainer.
Actually, the heuristic for IDE disks is to load every IDE controller
driver it knows, and then load the 'ide-detect' module. For SCSI
controllers it's a bit more discerning, but not for IDE.
--
Derrik Pates
[EMAIL
.
I've installed using the LordSutch mini-ISO images (that's what those
are), and I never had a problem. How exactly did you make the bootstrap
partition?
--
Derrik Pates
[EMAIL PROTECTED]
, but the command you're issuing
shouldn't work anyway (so it's not surprising that it doesn't).
--
Derrik Pates
[EMAIL PROTECTED]
the BSD license, but was
relicensed from the BSD license to Apple's APSL license (which is
considerably more restrictive).
--
Derrik Pates
[EMAIL PROTECTED]
depths.
--
Derrik Pates
[EMAIL PROTECTED]
) that the list is
English speaking - that's just the way it is.
--
Derrik Pates
[EMAIL PROTECTED]
. It makes USB, Ethernet, FireWire, audio, DRI and
everything else on the system function. The system in question is
running 2.6.5 (vanilla, from kernel.org), and works just fine.
--
Derrik Pates
[EMAIL PROTECTED]
#
# Automatically generated make config: don't edit
#
CONFIG_MMU=y
, it
should install a version of the 'wish' interpreter that should work for you.
--
Derrik Pates
[EMAIL PROTECTED]
, not a
G4 CPU card.
--
Derrik Pates
[EMAIL PROTECTED]
2-5 are vendor- or site-defined multiuser runlevels.
Does LSB go with the RH definitions, where 2 is basic multiuser, 3 is
multiuser with network, and 4 is multiuser with network and X?
As the saying goes, the wonderful thing about standards is there are so
many to choose from...
--
Derrik
on Debian (that's 2, 3, 4 and 5). Only Red
Hat (and SuSE, and Mandrake, and other RH-derived distros) follow in
that tradition - and that's because they actually run the display
manager through an inittab entry.
--
Derrik Pates
[EMAIL PROTECTED]
: reiserfs (even on x86), so I haven't used it. The only
unfortunate thing is that I haven't seen a Debian install disc that
includes JFS utilities. I had to use FireWire target disk mode with my
x86 system, back up, repartition, and restore, but I'm quite pleased
with the results.
--
Derrik Pates
in (I was using ext3
until just recently, then I switched to JFS). How much memory do you
have in your system? Are you sure you don't have funky memory? Or some
otherwise faulty hardware? Other than the CPU speed, your system should
be nearly identical to mine.
--
Derrik Pates
[EMAIL PROTECTED]
. It should boot normally.
--
Derrik Pates
[EMAIL PROTECTED]
-in 10/100 Ethernet,
and everything works fine (except for the obvious ones - IrDA and DRI).
--
Derrik Pates
[EMAIL PROTECTED]
#
# Automatically generated make config: don't edit
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
them statically into the kernel, so it'll
just work.
--
Derrik Pates
[EMAIL PROTECTED]
Pismo. 2.6.4 sleeps and wakes up perfectly.
--
Derrik Pates
[EMAIL PROTECTED]
an absolute path, like 'boot hd:3,\yaboot.txt'. Try
that and see if it works (it should).
--
Derrik Pates
[EMAIL PROTECTED]
(I've done it before, on a G3 tower and an older round
iBook). However, having OS 9 and OS X on a single partition _will not_
work without booting into whichever is blessed and using the Startup
Disk control panel to bless the appropriate system folder.
--
Derrik Pates
[EMAIL PROTECTED]
end up way out of whack in X under MOL in 16bpp mode.
--
Derrik Pates
[EMAIL PROTECTED]
crashes, or whatever, you don't have to sit
and wait while fsck runs on the filesystem.
--
Derrik Pates
[EMAIL PROTECTED]
that multiple partitions is a bad thing, but stuffing a
whole bunch of subtrees on one filesystem right away, as I said before,
is silly, and I really think you shouldn't do it. (Yes, I will continue
to offer this advice. Thanks. Feel free to ignore me.)
--
Derrik Pates
[EMAIL PROTECTED]
no Ethernet device, you may need to build your own kernel with the
SunGEM driver either built in, or as a module.
--
Derrik Pates
[EMAIL PROTECTED]
it.
The problem is, on most NewWorld machines (particularly
PowerBooks/iBooks and iMacs), there is no connection between the CD-ROM
drive and the audio board for Red Book audio, so you have to use a
player that reads the digital audio off the CD, and plays it back the
conventional way.
--
Derrik
perfectly with it.
--
Derrik Pates
[EMAIL PROTECTED]
'boot
/AAPL,ROM', which will load the Mac ROM, which will load miBoot from the
floppy (may need to hold F after pressing Enter at the OF prompt).
--
Derrik Pates
[EMAIL PROTECTED]
rendering enabled', then the problem is
something in the client side, and you should see what 'glxinfo' says.
and thus I do not have the DRI working and no 3d accel:-(
See above. Those messages aren't relevant.
--
Derrik Pates
[EMAIL PROTECTED]
on
startup...
Not true. I have a couple of those games, and they run just fine on my
Pismo (running Debian sid). You might need the patches, but you can
still download them.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
system can look at /proc/device-tree/packages/
and see if they have an 'elf-loader' package and prove me wrong, but
this was my understanding.
--
Derrik Pates
[EMAIL PROTECTED]
Pismo, and they're working great with the
gnome-themes-extra package (which includes several SVG themes). If
anyone wants to try them, add the following to your sources.list:
deb http://platinum.heliacal.net/~demon/gnome2.4-ppc/ ./
--
Derrik Pates
[EMAIL PROTECTED]
not executable, to keep it from
starting at all. Apparently it's actually a FAM bug, and supposedly
rebuilding it will produce a version that will work better.
--
Derrik Pates
[EMAIL PROTECTED]
for them. 'apt-cache show discover' will give you more
info about it.
--
Derrik Pates
[EMAIL PROTECTED]
with the dmasound driver in the kernel before,
so if I could use the ALSA driver instead, and still be able to suspend
my laptop, I'd definitely prefer that.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
for PowerBook G4s and iBooks with
DACA, Tumbler/Texas, and Snapper audio chips, where the mixer control is
done via an I2C bus.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
, and the SWIM3 floppy controller driver doesn't presently build
right (it prevents a successful build). I'm rather surprised that I had
to tweak the source, especially at this late stage, to get it to build
successfully.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
was so
happy to have mixer control at the time, balance control didn't really
cross my mind.) I'm guessing no one's played with it since then.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
at all. (Run 'dpkg-reconfigure -plow xserver-xfree86' if you used
debconf to configure your XF86Config-4, as I'm guessing you did.)
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
console for OpenFirmware,
according to http://www.penguinppc.org/projects/quik/quirks.shtml -
however the 7200 can't (because apparently OpenFirmware doesn't know how
to talk to its video device).
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
that the appropriate driver (snd-powermac, I think?) is loaded.
Read /usr/share/doc/alsa-source/README.Debian.gz for more info.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
firmware, since they are the same card otherwise.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
counterparts, other than an OF ROM.
If it's some other PPC machine, don't know..
If it also has an OpenFirmware implementation, odds are it'll just work.
If not, then probably no.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
!?!?
What's wrong?
Is the CD-ROM in your master on the secondary IDE channel? If not, the
'cd' devalias in OF will not work. You'll have to navigate the OF device
tree manually. 'dev / ls' will get you started there.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
that ybin generates and blesses is
what puts up the multiboot menu - yaboot itself just loads Linux
kernels.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
/lunN/generic, if you're using devfs),
and make sure that the user you're ripping as has permission to to read
and write to that device. (Ripping with SCSI drives is done by issuing
raw SCSI commands - you're using IDE-SCSI, so same thing applies.)
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
development by
Cort is going on, and linuxppc_2_4_benh is Ben's tree (where the really
experimental stuff is). The rsync is just a regular snapshot of the
BitKeeper tree.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
transceiver - they're dirt cheap on eBay.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
what he's doing, go get a Mac System 7.5/7.6 or System
8 CD, reinstall a small MacOS partition, then install Linux from there.
If he continues on as he's going, he'll have a perfectly good Linux
install which he won't be able to boot.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
it on a
NuBus system can be a bear. (Besides the fact that the kernel is at best
sporadically maintained for them.)
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
will always show what you
described, because MacOS makes a thin HFS wrapper around the HFS+
filesystem, for the sake of older MacOS versions. You can use the
'hfsplus' package to read and write HFS+ filesystems completely in
userspace (not transparent for applications though).
--
Derrik Pates
[EMAIL
- you're probably not going to get huge performance gains
with, say, QuakeII. But if lspci, or the board itself, says the card is
just a Mach64, don't bother, you're not going to get any 3D
acceleration, because it's not in the hardware.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
to a SWIM2 at
all. If you have a box with one, I'm sure there would be some happy
folks if you could figure out how to talk to it.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
layout.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
you an 80x30 console).
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
in the Device section? It
needs that. Though I can't imagine it causing that. Can you provide more
context from the logs than just one line?
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
.
--
Derrik Pates
[EMAIL PROTECTED]
[EMAIL PROTECTED]
1 - 100 of 273 matches
Mail list logo