On Tue, 02 Nov 2004 08:57:23 +1100, Benjamin Herrenschmidt
[EMAIL PROTECTED] wrote:
On Mon, 2004-11-01 at 13:24 +0100, Eric Lemoine wrote:
Current ppc.bkbits.net/linuxppc-2.5 BK kernel (2.6.10-rc1) doesn't
boot on my iBook/M3 (aty128). Boot stops just before switch to frame
buffer mode
On Tue, 02 Nov 2004 17:28:21 +1100, Benjamin Herrenschmidt
[EMAIL PROTECTED] wrote:
On Tue, 2004-11-02 at 07:31 +0100, Eric Lemoine wrote:
It doesn't help -- boot still stops after the five openpic: lines,
at switch-to-FB time it seems.
Try something like that patch and pass
Current ppc.bkbits.net/linuxppc-2.5 BK kernel (2.6.10-rc1) doesn't
boot on my iBook/M3 (aty128). Boot stops just before switch to frame
buffer mode!
Does anyone know what's going on?
See boot parameters and .config below.
Thanks,
PS: I don't have any problem with 2.6.5-rc3-ben0, with same
Hello!
Some time ago, Antonio Messina posted a patch to 2.5-benh aimed to make
the ibook/M3 external CRT work using benh's m3mirror utility (see [1]).
His patch was based upon some previous patch to 2.4-benh [2].
Since I haven't quite understood how to use Antonio's patch (it looks
like one
- Airport Extreme: not working, and apparently, might never work
(no drivers, no specs, uncaring broadcom company). Any information on an
open-source driver/work-around (with binary driver from OS X or
something!?)?
Nope, nothing yet, could never work.
:[
For those who do
And at last, if you mean the ndiswrapper project
(http://sourceforge.net/projects/ndiswrapper/ ), this will be a hack.
In fact, windows drivers are necessary. And Windows is for x86 in this
case. Porting this under powerpc architecture will (imho) be a bit
problematic.
I've been wondering
My problem is to get the right keyboard config. In fact, I can't have
some keys such as tilde or pipe ... I noticed that when I'm not
using the xserver but the consol I just have to type loadkeys
mac-fr-ext to get the right keykoard. Then I can get for eg the
tilde like in original mac
[EMAIL PROTECTED] lspci
00:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea AGP
00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
M3 AGP 2x (rev 02)
I can turn thge external monitor on and off using m3mirror crt:[01]
but the image onf the
After compiling and installing my (first) custom kernel (2.4.18), my
ABD keyboard is broken on my oldworld 7500 power mac.
Your new kernel most likely uses different keycodes than the previous
one, so your keyboard map must be changed. Note that linux keycodes (as
opposed to abd keycodes) are
Your new kernel most likely uses different keycodes than the previous
one, so your keyboard map must be changed. Note that linux keycodes (as
opposed to abd keycodes) are standard in the kernel.
Great, thanks, Eh... any idea how to specify which keyboard map to use
as default when I
I just finished installing my new 2.6.1 kernel, and it broke my
ethernet card configuration or something. Eth0 failed to go up on
start, and ifconfig eth0 up shows this:
eth0: ERROR while getting interface flags: No such device
Your driver is probably compiled as a module and the kernel
I just finished installing my new 2.6.1 kernel, and it broke my
ethernet card configuration or something. Eth0 failed to go up on
start, and ifconfig eth0 up shows this:
eth0: ERROR while getting interface flags: No such device
Your driver is probably compiled as a module and
If you dualboot modular 2.6 and 2.4 kernels, you need to set your
aliases (and options, and insert/remove commands, ...) in both
/etc/modutils/whatever and /etc/modprobe.d/whatever.
And if you don't want to insert the same modification twice each time,
you can add the directive include
Hello
I'm in the process of making my ibook/M3 work with 2.6.1-rc1-ben1. Up to
now, the only thing that doesn't work as good as with 2.4.23-pre5-ben0
is my external usb mouse. With 2.6.1-rc1-ben1, I need to manually insert
usbmouse.ko and ohci_hcd.ko, whereas plugging the mouse in was all I had
I just compiled and booted 2.6.1-rc1-ben1 on my ibook/M3. It booted fine
but my (french) keyboard map is completly screwed under the console
(haven't tested X yet). The map used to be ok with 2.4.23-pre5-ben0.
Does anyone know how to fix that?
Apparently, I was using adb-keycodes with 2.4 but
I just compiled and booted 2.6.1-rc1-ben1 on my ibook/M3. It booted fine
but my (french) keyboard map is completly screwed under the console
(haven't tested X yet). The map used to be ok with 2.4.23-pre5-ben0.
Does anyone know how to fix that?
Apparently, I was using adb-keycodes with
I just compiled and booted 2.6.1-rc1-ben1 on my ibook/M3. It booted fine
but my (french) keyboard map is completly screwed under the console
(haven't tested X yet). The map used to be ok with 2.4.23-pre5-ben0.
Does anyone know how to fix that?
Thx.
--
Eric
I just compiled and booted 2.6.1-rc1-ben1 on my ibook/M3. It booted
fine but my (french) keyboard map is completly screwed under the
console (haven't tested X yet). The map used to be ok with
2.4.23-pre5-ben0. Does anyone know how to fix that?
Is it just accent problem?
No no, every
I deb-packaged ssmtp-2.60.4 with TLS support for debian/testing/ppc.
[It seems the standard debian/testing package is not compiled with TLS
support.]
Just in case someone may need it.
http://perso.ens-lyon.fr/eric.lemoine/software/ssmtp_2.60.4_powerpc.deb
--
Eric
Does not work on my ibook/m3. First: the patch creates a weird vertical
line under X on my LCD. Second: it doesn't help on CRT either, the
screen is still shaking and, worse, it is doubled - I get two overlapped
pictures of my desktop.
Is there anything particular I should add into
I'm trying to mirror my iBook2 video for presentation (Debian
testing/unstable, 3.0r1, Kernel 2.4.18-newpmac).
Downloaded m3mirror from Benh's page.
With the FB device I get a 60Hz image that flickers a lot. If I try to
upgrade to 75Hz I get a melange of colours... if I open a shell I
For this to work on an iBook 2 with ATI M6 (not tested with M7), you
need this package :
hi xserver-xfree86-dri-trunk 2003.08.07-1The XFree86
X server [DRI trunk]
Any chance that cloning will work on ATI M3 with this xserver?
Sorry I keep asking this
For this to work on an iBook 2 with ATI M6 (not tested with M7), you
need this package :
hi xserver-xfree86-dri-trunk 2003.08.07-1The XFree86 X
server [DRI trunk]
Any chance that cloning will work on ATI M3 with this xserver?
Sorry I keep asking this question but I've
Hello
I know this has been asked millions of times.
External video on my ibook/ATI Mobility M3 does not work properly.
m3mirror effectively switch to external monitor but the picture is
wobbly.
My very last try:
Did anyone succeed in making her external video work with the ibook/ATI
M3
Here's my problem (in more details) with my airport card on an 802.11b
environment:
Upon loading airport module (2.4.20-ben5) I get the following in dmesg:
airport.c 0.11b (Benjamin Herrenschmidt [EMAIL PROTECTED])
eth1: Station identity 001f:0001:0008:0046
eth1: Looks like a Lucent/Agere
eth1 IEEE 802.11-DS ESSID:rover Nickname:eric-ibook
Mode:Managed Frequency:2.457GHz Access Point: 44:44:44:44:44:44
Bit Rate:11Mb/s Tx-Power=15 dBm Sensitivity:1/3
Retry limit:4 RTS thr:off Fragment thr:off
Encryption
What kind of hardware is used for the base station?
The base station we have here is a Cisco Aironet (340 or 350).
that setup looks similar to the one I've got at home; however,
I'm using a PCMCIA cisco aironet 350 card on debian-x86
as base station.
Note that for some bizarre reason,
Access Point is now 44:44:44:44:44:44, which I don't explain. More
importantly, Link Quality is 0/92 and Noise level is 134/153. I
don't know what this exactly means but that doesn't sound good to me!
Your airport didn't find your access point. Maybe your essid doesn't
match (note that
Hi!
I've been struggling with my Ibook2/airport setup for 3 days; with no
luck up to now. Here's my /etc/network/interfaces file:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
iface eth1 inet dhcp
wireless_essid rover
wireless_mode Managed
wireless_ap
Hi,
I've been facing a strange problem three times today : the 20GB hard
disk of my 550MHz TiBook made a very noisy sound (like some sort of
brutal spin down), obviously went down, and ... never up : at that
moment I could not perform any kind of disk access (sync stays hanged,
On Tue, 2002-04-16 at 16:26, Paolo Redaelli wrote:
Does anyone know if is it possible to use iBook's video output?
I would need it for a Free software conference at Politecnico di Milano
that will take place on 10 May.
Thanks in advance
Paolo Redaelli
Have a look here and see if
With
XkbRulesxfree86
XkbModelmacintosh
XkbLayout fr_new
my keyboard is still screwed up. By adding XkbKeycodes macintosh
everything works fine.
So you seem to be still using ADB keycodes and need XkbModel
macintosh_old.
You're right.
Well, here is my InputDevice section for my french keyboard. The key
option to get everything working was XkbKeycodes macintosh. You
may want to give this a try.
This is kind of a kitchen sink approach...
Section InputDevice
Identifier Mac Keyboard
Driver
Hello together,
sorry to ask you this possibly dumb question, but i couldn't find the
solution on the net.
I have a little problem with my keyboard on the powerbook g4 titanium. I
use a german keyboard layout, everything is working fine - even the
umlauts - but i can't write an @
Hi folks
I'm very new to this list and so hope my question well matches the
topics of the list.
I dont manage getting certain symbols (backslash, tilde et possibly
others) on my ibook2/debian/woody under Xfree4. I can get those
symbols on the console though.
Did anyone encounter this problem
35 matches
Mail list logo