Gnome 2.2 Volume and Panel Questions

2003-06-24 Thread Mannequin*
Now that I'm running Gnome 2.2 on a regular basis, I have some questions to annoying problems. First off, everytime I boot, or reboot the computer, when Gnome starts, it always has the volume down all the way. (It doesn't do it when I log out and then in again.) How would I go about getting it to

Re: Need recommendation for tape drive for new G4

2003-06-24 Thread Joe Phillips
On Tue, 2003-06-24 at 21:34, Brendan J Simon wrote: > 3) Exabyte Ecrix 33/66 Internal Tape Drive. I have 3 of these myself and a number in the field with clients in daily use. > Are these supported by linux? yes. > Is anyone using them and how do they rate? We're very happy with them. I

Re: Apple PowerMac G5

2003-06-24 Thread Nathanael Hasbrouck
Doesn't Apple maintain mkLinux? It's linux running on top of Mach. I had it installed on my 8500 a few years ago. I wouldn't be at all surprised if they had mkLinux running on it, as it would be another way to test the hardware. I could be wrong, but I didn't think Apple was doing anything w

Need recommendation for tape drive for new G4

2003-06-24 Thread Brendan J Simon
I'm looking at purchasing a dual 1.25GHz PowerMac with an 80GB or 120GB HDD. I need a tape backup unit and have been quoted prices by my local Apple reseller for the following units. 1) Sony AIT1 35/90 Internal Tape Drive. 2) Sony AIT2 50/130 Internal Tape Drive. 3) Exabyte Ecrix 33/66

Re: Apple PowerMac G5

2003-06-24 Thread Leandro Guimarães Faria Corsetti Dutra
On Wed, 25 Jun 2003 02:00:09 +0200, Jesús Roncero wrote: > On Wednesday 25 June 2003 01:24, Leandro Guimarães Faria Corsetti Dutra > wrote: >> Anyone has it working already with Debian? > > It's not even on sale!!! I suppose nobody has one except an apple engineer :-) I suppose res

Re: Apple PowerMac G5

2003-06-24 Thread Michael D. Crawford
Doesn't Apple maintain mkLinux? It's linux running on top of Mach. I had it installed on my 8500 a few years ago. I wouldn't be at all surprised if they had mkLinux running on it, as it would be another way to test the hardware. Maybe they'd be willing to release the source before they rele

Re: updated kernel problem

2003-06-24 Thread Martin-Éric Racine
On Tue, 24 Jun 2003, Daniel Jacobowitz wrote: > On Tue, Jun 24, 2003 at 11:46:40PM +0300, Martin-Éric Racine wrote: > > On Sun, 22 Jun 2003, Daniel Jacobowitz wrote: > > > > > And no one ever reported bugs to the contrary, which is about all I have > > > to > > > say about that - if you don't te

Re: Apple PowerMac G5

2003-06-24 Thread Jesús Roncero
On Wednesday 25 June 2003 01:24, Leandro Guimarães Faria Corsetti Dutra wrote: > Anyone has it working already with Debian? It's not even on sale!!! I suppose nobody has one except an apple engineer :-) -- Screw up your courage! You've screwed up everything else.

Re: Apple PowerMac G5

2003-06-24 Thread Bastien Nocera
On Wed, 2003-06-25 at 00:24, Leandro Guimarães Faria Corsetti Dutra wrote: > Anyone has it working already with Debian? Read the announcement properly, they won't ship until September in the US... -- Bastien Nocera <[EMAIL PROTECTED]>

Re: kernel panic

2003-06-24 Thread Benjamin Herrenschmidt
On Tue, 2003-06-24 at 16:08, Giuseppe Sacco wrote: > Hi people, > lately I got many kernel panic using 2.4.21-ben1 kernel compiled with > gcc-3.3 and with gcc-2.95. > > The message I get at the monitor prompt is > > kernel bug at page_alloc.c:106! > vector: 0 at pc=c0034c64, lr=c0034c64 > msr=90

Apple PowerMac G5

2003-06-24 Thread Leandro Guimarães Faria Corsetti Dutra
Anyone has it working already with Debian? -- _ / \ Leandro Guimarães Faria Corsetti Dutra +41 (21) 648 11 34 \ / http://br.geocities.com./lgcdutra/ +41 (78) 778 11 34 / \ Responda à lista, não a mim diretamente! +55 (11) 5686 2219 Rate this post if helpful: http://svcs

Re: updated kernel problem

2003-06-24 Thread Daniel Jacobowitz
On Tue, Jun 24, 2003 at 11:46:40PM +0300, Martin-Éric Racine wrote: > On Sun, 22 Jun 2003, Daniel Jacobowitz wrote: > > > On Mon, Jun 23, 2003 at 02:18:33AM +0300, Martin-Éric Racine wrote: > > > I'm quite aware that several people run linuxppc on Amiga and IBM > > > hardware. > > > However, judg

Re: updated kernel problem

2003-06-24 Thread Martin-Éric Racine
On Sun, 22 Jun 2003, Daniel Jacobowitz wrote: > On Mon, Jun 23, 2003 at 02:18:33AM +0300, Martin-Éric Racine wrote: > > I'm quite aware that several people run linuxppc on Amiga and IBM hardware. > > However, judging by the flood of posts from various PowerBook and iMac users > > lately, I'm start

RE: brother hl-1440 on usb with CUPS

2003-06-24 Thread Pisupati, Ajay
the 'enable' command as I understand it, enables the printer to print (as opposed to "disable" which is supposed to be the opposite for enable). if the printer is 'disable'd , then it still accepts print jobs but doesn't print them (this sounded like what was happening w/ your printer - cups sends

Re: brother hl-1440 on usb with CUPS

2003-06-24 Thread Matt Price
good news is -- printer now produces pages, though they tend to be interrupted mid-page and garbled a little bit. I found a suspicious message in /var/log/cups/error_log: D [24/Jun/2003:12:10:00 -0400] ReadClient() 2 GET /printers/hplaser HTTP/1.1 D [24/Jun/2003:12:10:00 -0400] CGI /usr/lib/cups/

RE: KDE3 in woody, powerpc arch

2003-06-24 Thread Vaughan, Curtis
So, anyone else know where it might be? My system now has no GUI as I started to try to install KDE3, but I can't see to get anywhere without this libqt3-mt. curtis -Original Message- From: Alex [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 24, 2003 7:51 AM To: debian-powerpc@lists.debian

Re: KDE3 in woody, powerpc arch

2003-06-24 Thread Benoit Mortier
Le Mardi 24 Juin 2003 16:31, Alex a écrit : > I'm crossposting in debian-kde, because maybe there, someone knows what > is happening. no.. i had to rebuild it for pwerpc myself. i will put my packages online by thursday., i will keep you informed... see ya -- OpenSides sprl Free Software Specia

RE: brother hl-1440 on usb with CUPS

2003-06-24 Thread Pisupati, Ajay
well, the next thing I have is maybe the printer is not enabled? (accepting print jobs but not printing) did you already try /usr/sbin/enable /dev/usb/lp0 you can also try /usr/sbin/accept /dev/usb/lp0 I am just reaching here but you can also try setting it as the default printer (although I do

Re: brother hl-1440 on usb with CUPS

2003-06-24 Thread Matt Price
On Tue, Jun 24, 2003 at 09:24:24AM -0400, Pisupati, Ajay wrote: > Hi Matt, > did you make sure that the printer is attached to the correct > /dev/usb/lpx file? well, I don't actually know how to check whether the printer is actually "attached" to /dev/usb/lp0, which is the device assigned t

Re: KDE3 in woody, powerpc arch

2003-06-24 Thread Alex
I'm crossposting in debian-kde, because maybe there, someone knows what is happening. El Martes, 24 de Junio de 2003 14:34, Curtis Vaughan escribió: > I have already added the line to my sources.list file, but there is no > libqt3-mt that is >= 3.1.2, which is required according to other kde3 > f

[no subject]

2003-06-24 Thread Balazs Csaba
Szeretne pénzt keresni interneten? Itt a lehetőség ! Anyagi problémáit megoldhatja. Az egyetlen feltétel: az ön lelkesedése! Ez NEM egy hamis PIRAMISJÁTÉK! (nem egy "cápa" tipusu vállalkozás!) államilag, sőt világszerte elismert és működik. Lehetséges, hogy ön már hallott hasonló ajánlatokró

kernel panic

2003-06-24 Thread Giuseppe Sacco
Hi people, lately I got many kernel panic using 2.4.21-ben1 kernel compiled with gcc-3.3 and with gcc-2.95. The message I get at the monitor prompt is kernel bug at page_alloc.c:106! vector: 0 at pc=c0034c64, lr=c0034c64 msr=9032, sp=dc5dfde0 [dc5dfd18] current=dc5de000, pid=447, comm=XFree86

RE: brother hl-1440 on usb with CUPS

2003-06-24 Thread Pisupati, Ajay
Hi Matt, did you make sure that the printer is attached to the correct /dev/usb/lpx file? correct permissions? Do your printer need a PPD file as described in www.cups.org/cups-help.html? -ajay > -Original Message- > From: Matt Price [mailto:[EMAIL PROTECTED] > Sent: Tuesday, June

brother hl-1440 on usb with CUPS

2003-06-24 Thread Matt Price
Hi folks, can't seem to get my printer to work on a b&w g3, running a mixed woody/sid system, using the woody cups packages. I followed the instructions for printer installation in the Debian Reference Guide (http://www.debian.org/doc/manuals/reference/reference.en.html), installed the printer th

Re: KDE3

2003-06-24 Thread Curtis Vaughan
I have already added the line to my sources.list file, but there is no libqt3-mt that is >= 3.1.2, which is required according to other kde3 files. I've looked over the site and also don't see it. BTW, to respond to Jens, I tried WindowsMaker a long time ago, but I just didn't get it. But it wa

Re: KDE3

2003-06-24 Thread Alex
El Martes, 24 de Junio de 2003 05:36, Curtis Vaughan escribió: > BTW, in order to install KDE 3 I need libqt3-mt >= 3.1.2, which is not > available through packages.debian.org. Where can I get it? In the same place where kde is, using download.kde.org, and apt-get: http://kde.org/download/ KDE 3

Development help needed for prom-libc/yaboot2

2003-06-24 Thread Ethan Benson
Hi, As you may have heard I have been working on completely rewriting, and redesigning yaboot, from scratch, for a 2.0 release. (the 2.0 release will address many long standing user issues, and in general make for a much more useful, powerful, and portable bootloader). However my time is rather

Re: KDE3

2003-06-24 Thread Jens Schmalzing
Hi, Curtis Vaughan writes: > Any reason not to move to KDE3? Yes. WindowMaker. SCNR, Jens. -- J'qbpbe, le m'en fquz pe j'qbpbe! Le veux aimeb et mqubib panz je pézqbpbe je djuz tqtaj!