PROTECTED]
--
David Stanaway [EMAIL PROTECTED]
On Sat, 2002-03-30 at 02:17, Daniel Kleine-Albers wrote:
Hello,
it's a little bit off-topic, but maybe someone of you knows where i can
buy such a thing. I need a USB-S/PDIF-Converter Cable to output the
sound digitally to my minidisc recorder via an optical link (TOSLINK).
Does anyone
I found this modline on the net:
Modeline 1152x768 65 1152 1168 1384 1480 768 771 777 806 -hsync -vsync
.. but I would like to know how to get that into debconf so that when I
upgrade X at some point in the future, I don't have to manually add it
again.
--
David Stanaway
[EMAIL PROTECTED
/.swapfile in fstab too
/.swapfile noneswapsw 0 0
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
may also like to see the archive of this list and look for this
email:
From: William R Sowerbutts [EMAIL PROTECTED]
To: debian-powerpc@lists.debian.org
Subject:Sharing disk space between MacOS X and Linux
Date: 03 Apr 2002 11:27:59 +0100
Which goes equally for MacOS9.
--
David
, then modprobe dmaaudio-pmac)
To give yourself access to the audio device:
adduser yourusername audio
And make sure that group audio has read/write access to /dev/dsp and
/dev/mixer
Now logout of gnome or kde, then log back in. You should have audio
now.
--
David Stanaway
signature.asc
). I have attached my .config (Put it in the
untarred kernel tree before you run make menuconfig).
--
David Stanaway
#
# Automatically generated make config: don't edit
#
# CONFIG_UID16 is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
This came up on debian-boot, I thought I would spread it to powerpc :)
--
David Stanaway
---BeginMessage---
package: install
release: 2.2.3
Hi there,
I have followed the install procedure for the prep method v1.1 15 oct 1999
when installing debian linux.
I have tried the release from 23
I was wondering why there is no abiword built for powerpc in woody?
There are builds for hppa, alpha, ia64, i386, mips, mipsel and sparc
But no powerpc :/
Is this likely to be built before release?
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
Hi,
I was wondering if anyone has had any luck booting off a firewire drive.
The first thing I tried was to get the ofpath for the device, but that
doesn't work:
ofpath /dev/sda9
ofpath: Driver: sbp2 is not supported
Is there anything else I should try?
--
David Stanaway
signature.asc
it), and remeber to enable macserial as a module in the macintosh device
drivers section if you rebuild your kernel.
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
if it applies to you.
http://penguinppc.org/~benh/
Where he talks about m3mirror
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
that.. You are in group audio, and /dev/dsp and /dev/mixer
are rw to group audio?
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
than mp3 but I was
hoping for at least real time perfomance.
It doesn't really matter to me if I creat oggs or mp3s.
Any recommendations?
--
Cheers
David Stanaway
signature.asc
Description: This is a digitally signed message part
an Apple Pro keyboard which has a regualr keyboard with the
exception of Help which funtions as Insert.
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
settings getting junked
when the system goes into sleep. It could be a problem with esd also,
as I am running that.
Cheers...
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
...
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
On Thu, 2002-04-25 at 11:49, Bastien Nocera wrote:
On Thu, 2002-04-25 at 17:39, David Stanaway wrote:
Hi,
My TiBook is acting as a web/mail server at the moment and I would like
to be able to put the lid down when I am not logged in, but at the
moment this puts the system into sleep
options in XF86Config-4:
Section ServerFlags
Option BlankTime 2
Option OffTime 5
EndSection
so that my screenblanking will work based on an idle timeout in X
(Either at the gdm login screen, or in a user session).
Any tips would be welcome :)
--
David Stanaway
signature.asc
this script so use with caution.. (IE Read through it
and check that it makes sense, test it on a small dir tree with some
copies of files in it.
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
On Wed, 2002-05-08 at 14:29, Gjermund Gusland Thorsen wrote:
But I still got the same keyboard problem :-( pls help
When I try to login in gdm pressing q on the keyboard shows 1 on the screen,
something is fxxked up for the lack of a better term.
This is a bit of an FAQ. Search the
:
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
-modules-2.4.19-pre6-ben0_0.9.61+10.00.Custom_powerpc.deb
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
On Sun, 2002-05-19 at 11:43, Lars D. Noodén wrote:
Thanks, Jeroen,
It turns out that I was missing libc6-devel.
You will find that: apt-get builddeps
is handy.
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
Hi there,
is there a way around this problem that gets reported by quake2 when I
start it?
--- sound initialization ---
SNDDMA_Init: Sorry, but your soundcard doesn't support trigger or mmap.
(0100)
Thanks..
--
David Stanaway
signature.asc
Description: This is a digitally signed
On Fri, 2002-05-24 at 23:20, [EMAIL PROTECTED] wrote:
Also, would I be able to initialize ext3 partitions using the new boot
floppies? I'd like to move everything over to ext3.
When I installed woody, I was able to set up an ext3 filesystem with the
new-powermac boot floppy flavour. That was
On Thu, 2002-06-06 at 14:42, Chris Tillman wrote:
On Thu, Jun 06, 2002 at 02:41:48PM -0300, Daniel Bolgheroni wrote:
Why monolithic kernels can?t run on NuBus systems like
Performa 6300?
Try nubus-mac.sourceforge.net.
Better yet, try:
http://sourceforge.net/projects/nubus-pmac/
The developers have notified the general list that they have some major
changes in their bitkeeper sources that they would like tested.
I thought that people on debian-powerpc might be interested even if it
is slightly off-topic.
Full message with bk/rsync details..:
I should do?
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
On Mon, 2002-06-17 at 11:37, Branden Robinson wrote:
On Mon, Jun 17, 2002 at 10:34:43AM -0500, David Stanaway wrote:
I was building X over night (It failed strangely...) and my gnome
[...]
My X build died at: Jun 17 02:35
If this is XFree86 4.2.0-0pre1v1:
Depending on what timezone
Electric Apple Extended
USB Keyboard] on usb1:3.1
input6,hiddev0: USB HID v10.01 Mouse [Logitech USB Mouse] on usb1:4.0
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
On Tue, 2002-06-18 at 10:16, Michel Dänzer wrote:
On Tue, 2002-06-18 at 13:52, David Stanaway wrote:
Here is the running problem that I was having:
There are some regular but intermitant problems with registering mouse
clicks, and some key combinations yeild odd results. All revolving
On Tue, 2002-06-18 at 17:09, Michel Dänzer wrote:
On Tue, 2002-06-18 at 23:35, David Stanaway wrote:
On Tue, 2002-06-18 at 10:16, Michel Dänzer wrote:
On Tue, 2002-06-18 at 13:52, David Stanaway wrote:
Here is the running problem that I was having:
There are some regular
Hi,
I want to use xfs on my ppc, but I was wondering what important stuff I
would be missing from the -benh branch.
If I use the linux2.4-xfs cvs repository at SGI, should I expect
problems with powerpc?
I have a 1st gen TiBook.
--
David Stanaway
signature.asc
Description
had M-F1 bound to exec:
/sbin/fblevel off and M-F2 bound to exec: /sbin/fblevel on)
--
David Stanaway
signature.asc
Description: This is a digitally signed message part
=m
CONFIG_DMASOUND=m
in the .config (You chould base your .config on the debian default which
is in /boot/config-2.2.20-newpmac. I am not sure / can't remember what
happens when you take a config from a 2.2 kernel and use it in a 2.4
kernel. It should be OK.
--
David Stanaway
signature.asc
for device
Aug 19 15:05:50 ciderbox pppd[11078]: Hangup (SIGHUP)
--
David Stanaway
and insert the links in /etc/rc* myself, but this
seems somehow tacky.
Write it, and put it in /etc/init.d
then install it with update-rc.d (It has a nice manpage)
--
David Stanaway
/gdm.conf:command=/usr/X11R6/bin/X -nolisten tcp
-deferglyphs 16
/etc/X11/xdm/Xservers::0 local /usr/X11R6/bin/X -dpi 100 -nolisten tcp
It depends which display manager you are using, but if you want network
access to the display, then you want to take out the -nolisten tcp
arg.
--
David Stanaway
. That made me
wonder if it affects AMD chips also. (is the problem with X86 architecure or
Intel's version?)
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
--
David Stanaway
: Is the ibook able to do a hot-switch of batteries?
Thanks in advance,
Johannes
--
David Stanaway
: 14524
Maintainer: Mark Howard [EMAIL PROTECTED]
Architecture: powerpc
Version: 1.3.0.20021103-1
Replaces: galeon-beta
Provides: www-browser
I get the same behaviour (No context menus), and this is kinda
frustrating.
--
David Stanaway
...
I don't speak Portugese, and I am only learning Spanish, but I am fairly
sure that Carlos is saying that he is having enormous difficulties
installing Debian 3.0 on his IBM F50 (Which is a CHRP system), and he
needs a procedure to follow to install woody on this machine.
--
David Stanaway
Here is a procedure posted here [EMAIL PROTECTED] from
my mail archive...
--
David Stanaway
---BeginMessage---
Hi all,
I've finally managed to net-install Debian woody on the IBM
RS/6000 7025 F50. Here are some details for what they're worth.
I've had to compile a kernel from sources
I am also having problems booting the new kernel.
It complains about being unable to mount the root VFS hda11 or hda11
The kernel image is compiled with xfs support, and the root is xfs.
From memory, this is the relevant stuff in my yaboot.conf
partition=11
boot=/dev/hda9
root=/dev/hda12
On Mon, 2004-02-23 at 03:15, Victor Fuente wrote:
Hi David, recently i had the same problem with 2.6 and it was
because i forgot to build pci support in the kernel.
I just tried the same .config with 2.6.3 vanilla and it is working, I
will just stick with that for a bit.
--
David Stanaway
in sid if that is relevant).
Should I be using framebuffer and the ati driver in X, or should I be
using the fb driver?
I can see the CRT and the LCD device entries in /proc/device-tree and I
can turn the lcd and the crt off and on with m3mirror, I just can't get
X to use the CRT.
--
David Stanaway
the displays
in prom_init to review the displays found in the first part of
check_displays?
I haven't looked through the aty128fb driver yet, but what is involved
in fixing up dualhead there?
--
David Stanaway [EMAIL PROTECTED]
I got this from BenH, looks like he ment to CC the list but typoed :P.
--
David Stanaway [EMAIL PROTECTED]
---BeginMessage---
I could make it just open the first display if there were 2 and they
were both M3s, but is there are more general test to see if this is
necessary?
In the normal
seems to be setup with color, and mode
information for the primary display in both drivers.
I haven't looked at the X drivers yet, I am sure that will answer my
questions. Again what version was dual head support introduced for the
radeon driver so I can see what was changes were needed.
--
David
that to play DVDs on my TiBook 450MHz.
It supports DVD menus too which is a bonus compared to mplayer, vlc
etc..
--
David Stanaway [EMAIL PROTECTED]
was looking for hardware to work on the dual head
support.
--
David Stanaway [EMAIL PROTECTED]
On Fri, 2004-11-26 at 00:24, Benjamin Herrenschmidt wrote:
On Thu, 2004-11-25 at 23:38 -0600, David Stanaway wrote:
On Fri, 2004-11-12 at 19:35, Benjamin Herrenschmidt wrote:
Well, if you don't know the chip well and don't have specs, it will be a
hard time to get that stuff working
53 matches
Mail list logo
