Olá amigos, Estou com problema para iniciar automaticamente as interfaces de rede na inicialização.
Parece que, por algum motivo ainda desconhecido, o script /etc/init.d/networking não está levantando as interfaces configuradas em /etc/network/interfaces. O módulo da placa está carregado, tanto que é possível levantar a rede manualmente com os comandos ifconfig e route. Uma curiosidade é que depois de levantadas manualmente as interfaces eth0 e lo, o script /etc/init.d/networking consegue descarregar (ao comando stop) e carregar (ao comando start) as interfaces, ou seja, passa a funcionar, mas só depois de já ter feito o trabalho manualmente. Abaixo algumas informações sobre o host e configurações; # lspci | grep Ether 00:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20) # lsmod | grep 8139 8139too 38400 0 8139cp 35200 0 mii 14592 2 8139too,8139cp # cat /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.9.16.26 netmask 255.255.255.0 network 10.9.16.0 broadcast 10.9.16.255 gateway 10.9.16.254 dns-nameservers 10.9.16.202 # cat /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, probably run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single line. # PCI device 0x10ec:0x8139 (8139cp) SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:16:3e:3f:13:e0", NAME="eth0" # dmesg | fgrep -i eth [ 60.809014] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 60.822891] eth0: RTL-8139C+ at 0xffffc20000a96000, 00:16:3e:3f:13:e0, IRQ 32 [ 60.852737] 8139too Fast Ethernet driver 0.9.28 [ 69.441750] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 [ 79.968378] eth0: no IPv6 routers present [ 356.349541] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 [ 367.150362] eth0: no IPv6 routers present [ 376.840140] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 [ 386.999074] eth0: no IPv6 routers present Mais alguma informação? Valeu! []'s -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org