On Mit, 2011-01-05 at 16:43 -0500, dpickett wrote:
On Jan 5, 2011, at 9:53 AM, Michel Dänzer wrote:
On Die, 2011-01-04 at 14:35 -0500, dpickett wrote:
The monitor does not go blank: it loses signal as the entire machine
locks up. After starting X, I see a brief flash of text
.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http
to console with
ctrl-alt-F1? If so, do you get a picture of the GNOME desktop if you
switch the monitor to the other DVI connector of the graphics card once
X is up and running?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian
to
capture the DRM debugging output only after X startup. Otherwise make
sure to re-mount the filesystem in sync mode to try and get as much
information as possible in kern.log. dmesg after the reboot is pointless
in that case.
--
Earthling Michel Dänzer |http://www.vmware.com
requires switching versions of other packages, in particular
xserver-xorg-core. The difference might actually be there. E.g. it might
be interesting rebuilding the Debian driver package against the Ubuntu X
server and vice versa and seeing what happens in each case.
--
Earthling Michel Dänzer
= RADEON_HOST_DATA_SWAP_HDW;
+ break;
+ }
}
#endif
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject
and if the problem still occurs,
saving all even remotely relevant configuration and log files and then
looking for differences in them after the problem is fixed.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI
no additional DRM
output. Did you run ybin after modifying yaboot.conf? You could also
just add the parameter at the yaboot prompt.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
firmware!
[...]
Versions of packages xserver-xorg-video-radeon suggests:
pn firmware-linuxnone (no description available)
Try installing this package.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast
being disabled, is it really the
latest one?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http
,
please provide at least any AGP/DRM related messages from dmesg.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject
,sync /
before reproducing the problem.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
On Mon, 2010-12-27 at 10:57 +0100, Michel Dänzer wrote:
On Sam, 2010-12-25 at 17:29 -0500, dpickett wrote:
It appears the entire machine is locking up when I try to startx.
I can boot the machine into Linux single mode and ssh into it from
another machine. When I type startx the see
be captured in the gdm / kdm log file)?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
installed. Kernal is Linux
2.6.26-2-powerpc64.
[...]
(EE) RADEON(0): FIFO timed out, resetting engine...
The X server is hanging because the GPU locked up.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI
] *ERROR* Failed to load firmware!
[...]
Versions of packages xserver-xorg-video-radeon suggests:
pn firmware-linuxnone (no description available)
Does installing this package and rebooting help for any of your
problems?
--
Earthling Michel Dänzer
with xserver-xorg-core-dbg installed) in valgrind
--leak-check=full might be a start, though something like odin
(http://cgit.freedesktop.org/~ickle/odin) or memprof may be necessary if
the memory is freed during X server shutdown.
--
Earthling Michel Dänzer |http
.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive
On Fre, 2010-11-26 at 18:58 +0100, Julien Cristau wrote:
On Fri, Nov 26, 2010 at 08:44:29 +0100, Michel Dänzer wrote:
I've thought of a simpler possible solution:
* Fix the Gallium drivers to bail gracefully instead of crashing
with UMS (this will need to happen anyway
On Fre, 2010-11-26 at 19:32 +1100, Christopher James Halse Rogers
wrote:
On Fri, 2010-11-26 at 08:44 +0100, Michel Dänzer wrote:
On Fre, 2010-11-12 at 12:32 +1100, Christopher James Halse Rogers
wrote:
On Thu, 2010-11-11 at 13:06 +0100, Michel Dänzer wrote:
On Don, 2010-11-11 at 12
?
Though I'm not sure why restoring the older extension modules would make
a difference, the xorg-server changelog doesn't seem to mention any
GLX/DRI2 related changes.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X
On Fre, 2010-11-12 at 12:32 +1100, Christopher James Halse Rogers
wrote:
On Thu, 2010-11-11 at 13:06 +0100, Michel Dänzer wrote:
On Don, 2010-11-11 at 12:26 +1100, Christopher James Halse Rogers
wrote:
Can you see an easy solution which allows changes during X's runtime
On Fre, 2010-11-12 at 12:32 +1100, Christopher James Halse Rogers
wrote:
On Thu, 2010-11-11 at 13:06 +0100, Michel Dänzer wrote:
On Don, 2010-11-11 at 12:26 +1100, Christopher James Halse Rogers
wrote:
On Wed, 2010-11-10 at 09:33 +0100, Michel Dänzer wrote:
On Mit, 2010-11-10 at 18
On Don, 2010-11-11 at 12:26 +1100, Christopher James Halse Rogers
wrote:
On Wed, 2010-11-10 at 09:33 +0100, Michel Dänzer wrote:
On Mit, 2010-11-10 at 18:57 +1100, Christopher James Halse Rogers
wrote:
1) Ship both the classic and gallium versions of r300 r600, and have
the DDX
server's runtime (when KMS is enabled) isn't
adequate.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe
with specific information. The biggest known gotchas right now are:
* radeon.agpmode=1 (or even radeon.agpmode=-1) may be needed for
KMS to be stable on PowerMacs.
* On laptops there's no backlight control and no suspend to RAM
support yet.
--
Earthling Michel Dänzer
traditionally broke in various ways in that case, but
AFAICT at least this particular crash might be fixed in newer versions
of the X server.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
afraid. Thanks for working on it!
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
by disabling radeonfb, but
unfortunately it's not a full replacement yet at least on PPC laptops as
it doesn't support panel backlight control (hopefully fixed in the
mainline kernel soon) or suspend/resume (will probably take longer
still) yet.
--
Earthling Michel Dänzer
I see the following line:
[KMS] drm report modesetting isn't supported.
So, I'm not sure if KMS is being used or not.
It means the X driver isn't using KMS. Please provide the full
Xorg.0.log and (at least the relevant) dmesg output from this test.
--
Earthling Michel Dänzer
, any problems with
that are more likely due to the KMS support in the kernel.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
On Fre, 2010-10-01 at 11:45 -0400, Brent S. Elmer Ph.D. wrote:
Here are the files you asked for.
Brent
On Fri, 2010-10-01 at 17:25 +0200, Michel Dänzer wrote:
On Fre, 2010-10-01 at 11:12 -0400, Brent S. Elmer Ph.D. wrote:
I got the latest linux-source 2.6.32 from sid and rebuilt my
.
[1.182590] [drm] radeon defaulting to userspace modesetting.
Looks like radeon.modeset=1 needs to be specified explicitly.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email
based wrapper would work with any libGL
conforming to the libGL ABI. Surely the stub generation can be automated
at least to some degree, maybe the Mesa glapi scripts can be (ab)used
for that.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast
On Don, 2010-09-16 at 11:43 -0400, Chris King wrote:
2010/9/16 Michel Dänzer daen...@debian.org:
I'm leaning towards considering libgl1-mesa-swx11-dev shipping libGL.a a
mistake rather than libgl1-mesa-dev not shipping one.
Why, may I ask? Because there are multiple implementations
bugs then, one in the X driver's RENDER
acceleration code and one in the Mesa radeon driver.
NB : 1px white line is displayed both in console X
Yet another bug in the kernel then. Is it using the laptop panel's
native resolution?
--
Earthling Michel Dänzer |http
)
Does
Option RenderAccel off
in xorg.conf work around this bug (and/or the other one you reported)?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ
screenshot with konsole).
Should
I file another bug for this one ?
If there isn't one already, yes.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ
with XRender
That's most likely a bug in radeon_dri.so from the libgl1-mesa-dri
package then, reassigning.
The white line may or may not be related.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
this is probably some kind of system setup/configuration issue,
the X driver should probably bail in this situation...
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email
/lib/xorg/modules/extensions/libglx.so is from an
fglrx driver installation, which probably can't work with other drivers.
Try fixing that.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
just a band-aid for the real root
cause...
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
diff --git a/src/radeon_dri2.c b/src/radeon_dri2.c
index a0ed085..ae8951f 100644
--- a/src/radeon_dri2.c
...)
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
:0 vt7 vt7
-nolisten tcp
root 31923 0.0 0.0 5516 808 pts/3S+ 10:45 0:00 grep X
~# gdb /usr/lib/debug/usr/bin/Xorg 8450
Does it work better if you use just
gdb -p PID of X server
instead?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre
(Segmentation fault). Server aborting
Looks like the crash is in the X driver, reassigning. Please try and get
a full backtrace with gdb.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
the symbols?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
turning off KMS and upgrading, I was to switch back to 16BPP, which
works accelerated now, so the bug doesn't affect me. However, this is rather
a
workaround than a fix.
Indeed.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast
): At least 34020 kB of video memory needed at this resolution
and depth.
Maybe it'll work without Option AccelMethod XAA (or with explicit
EXA instead), otherwise you'll need to reduce the maximum desktop size
via the Virtual directive or run in depth 16.
--
Earthling Michel Dänzer
On Fre, 2010-07-09 at 17:40 +0200, Ulrich Eckhardt wrote:
On Friday 09 July 2010 14:56:39 Michel Dänzer wrote:
This is the reason for the DRI being disabled now:
(II) RADEON(0): Memory manager initialized to (0,0) (1728,4854)
(II) RADEON(0): Reserved area from (0,1680) to (1728,1682
starting X?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
radeon developers: In this case it would
probably be more useful to initialize the DRM without KMS?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ
modprobe radeon
as well as the messages appearing in the dmesg output after it.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
/radeon-kms.conf, then X
completely works again.
[...]
Current Operating System: Linux dante 2.6.32-trunk-amd64 #1 SMP Sun Jan 10
22:40:40 UTC 2010 x86_64
Try a 2.6.32-4-amd64 or newer kernel.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software
reassign 583653 linux-2.6 2.6.32-13
kthxbye
On Sam, 2010-05-29 at 17:33 +0200, Sylvain Beucler wrote:
On Sat, May 29, 2010 at 04:21:46PM +0200, Michel Dänzer wrote:
On Sam, 2010-05-29 at 15:02 +0200, Sylvain Beucler wrote:
On Sat, May 29, 2010 at 01:05:36PM +0200, Michel Dänzer wrote
On Mon, 2010-05-31 at 09:43 +0200, Michel Dänzer wrote:
reassign 583653 linux-2.6 2.6.32-13
kthxbye
On Sam, 2010-05-29 at 17:33 +0200, Sylvain Beucler wrote:
On Sat, May 29, 2010 at 04:21:46PM +0200, Michel Dänzer wrote:
On Sam, 2010-05-29 at 15:02 +0200, Sylvain Beucler wrote
the runs.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
representative for 'most 2D games'.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
On Sam, 2010-05-29 at 15:02 +0200, Sylvain Beucler wrote:
On Sat, May 29, 2010 at 01:05:36PM +0200, Michel Dänzer wrote:
On Sam, 2010-05-29 at 10:21 +0200, Sylvain Beucler wrote:
The attached simple test runs at 17FPS in KMS mode on my computer,
against 300FPS in non-KMS mode
. llvmpipe powered swrastg_dri.so / libgl1-mesa-swx11 or OpenVG.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject
)
This should be fixed in xserver-xorg-core 2:1.7.7-1.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe
:
Section Device
Identifier r128
Driver r128
Option NoAccel
EndSection
(the r128 driver doesn't seem to have an option to keep 2d acceleration
but not dri.)
The historical way to disable the DRI was to prevent the loading of the
dri module.
--
Earthling Michel Dänzer
The 6.12 driver doesn't support KMS, so you didn't in fact test KMS but
a completely unsupported configuration where the kernel and X drivers
are fighting for hardware access.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian
Git server-1.7-nominations
branch and the next upload of the xserver-xorg-core package.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ
the fact that /usr/lib/pkgconfig/dri.pc
and /usr/include/GL/internal/dri_interface.h reference stuff from
libdrm-dev and aren't usable without it. If the dependency on libdrm-dev
isn't desirable for mesa-common-dev, these files should be moved into a
separate package.
--
Earthling Michel Dänzer
(insufficient resources for operation)'.
Textured video can't work reliably with compositing with XAA, try EXA.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email
.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http
in miPolyArc() (as pDrawTo != pDraw).
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
On Sun, 2010-04-04 at 08:31 +0200, Josselin Mouette wrote:
Le vendredi 02 avril 2010 à 11:44 +0200, Michel Dänzer a écrit :
After a few more tries, I’m a bit disappointed. The crash has gone,
sure, but after a bit of juggling with several X servers, new X servers
still refuse to start
for good.
After a few more tries, I’m a bit disappointed. The crash has gone,
sure, but after a bit of juggling with several X servers, new X servers
still refuse to start with the same error as before.
Please provide the log files from both servers.
--
Earthling Michel Dänzer
your own report with all the usual information.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
reassign 575681 linux-2.6
kthxbye
On Thu, 2010-04-01 at 09:32 +0200, Fabian Greffrath wrote:
Am 31.03.2010 14:34, schrieb Michel Dänzer:
Not sure how it could be. Your symptoms are really weird. One thing I
wonder:
[6.093152] [drm] radeon: 2 quad pipes, 1 Z pipes initialized.
Maybe
driver is doing something wrong.
If there's a problem, I missed its description in Will's post.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ
Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http
and the console are using the same mode, but
that's probably not the case since you're using a custom modeline.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ
? That option has nothing to do with XAA.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
.
Note that when it happens, the kernel logs something like this:
Mar 27 12:38:42 tomoyo kernel: [ 199.622777] Unpin not necessary for
88007b6c2e00 !
That's harmless.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast
Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http
not support DRI.
Result is a painfully slow desktop experience.
The X log file shows the radeon driver successfully initializing the
DRI. If you're really having issues with the r128 driver on another
machine, please provide the corresponding log file.
--
Earthling Michel Dänzer
normal.
The only thing that seems at normal bright is the mouse pointer.
Can you fix the darkness e.g. with xgamma?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email
with
the right ABI dependency. Maybe the drivers can keep providing an
xorg-driver virtual package (which wouldn't have to be versioned).
I guess xorg-driver-video and xorg-driver-input would be needed, but
other than that this sounds good to me.
--
Earthling Michel Dänzer
, this is more likely a kernel driver
issue than an X driver issue.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject
notice anything unusual.
Tell me if I can help further.
Please post your Xorg.0.log and dmesg output from when the problem
occurs.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
?
If you're still running the server in depth 16, try 24. (Known but low
priority bug in / related to xserver 1.7)
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian
kernel modesetting, make sure your module is
[dri] loaded prior to starting X, and that this driver was built
[dri] with support for KMS.
[dri] Disabling DRI.
Looks like the driver wasn't built with KMS support. Maybe the build
dependencies are too lax.
--
Earthling Michel Dänzer
.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive
On Sun, 2010-03-07 at 16:13 +0100, Brice Goglin wrote:
Michel Dänzer wrote:
On Sun, 2010-03-07 at 13:46 +0100, Alexey Feldgendler wrote:
On Sun, 07 Mar 2010 10:14:17 +0100, Brice Goglin
brice.gog...@ens-lyon.org wrote:
You probably should enable KMS in your kernel
packages from unstable?
The above can't really be caused by the video driver anyway. Sounds more
like an XKB configuration issue.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http
the system would react differently if radeon
was loaded directly with kms enabled, but I don't know how to
selectively achieve that at boot time.
You can pass
radeon.modeset=1
on the kernel command line.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software
previously the panel backlight was off in addition to
the CLUT problem.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
be properly integrated with the
compositing.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
. ...and somehow the usage of AIGLX by
compiz works around that issue.
If DRI2 is enabled on the Intel machine, compiz probably isn't using
AIGLX. I think it's more likely related to some kind of colourmap
related interaction unique to compiz or Metacity.
--
Earthling Michel Dänzer
[ 22.597101] fb0: inteldrmfb frame buffer device
Interesting, has this been reported to the kernel package maintainers?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian
.
The crash happens most often when highlighting text in KMail.
The question is why it only seems to happen for a few people, and if the
patch isn't just papering over the real issue...
Anyway, would be good to re-submit the patch to the xorg-devel mailing
list for review.
--
Earthling Michel Dänzer
] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
[...]
(EE) AIGLX error: Calling driver entry point failed
This is usually because the 3D driver doesn't have KMS support built in.
Did you upgrade libgl1-mesa-dri to experimental as well?
--
Earthling Michel Dänzer
is work.
Does
sleep 1; xset dpms force off
work better?
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject
to suggest that the server is in an infinite loop.
Do things work better with AGP disabled? To disable it, with KMS pass
radeon.agpmode=-1 on the kernel command line. Without KMS, specify
Option BusType PCIE
in xorg.conf.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre
On Thu, 2010-02-04 at 13:19 +, Ben Whyte wrote:
I dont think that will work as the card is an AGP card.
If it wasn't applicable, I wouldn't have asked.
--
Earthling Michel Dänzer |http://www.vmware.com
Libre software enthusiast | Debian, X
501 - 600 of 2790 matches
Mail list logo