I tried to subscribe an audio podcast under a regular URL.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to rhythmbox in Ubuntu.
https://bugs.launchpad.net/bugs/1755174
Title:
rhythmbox ignores proxy settings
To manage
Public bug reported:
Hi,
I just tested the upcoming 18.04 release from a network behind a web
proxy without direct internet access. Although I have set the proxy in
the desktop settings and other programs (e.g. this bug report) honor and
use the proxy, rhythmbox complains that there is no
Public bug reported:
Hi,
I have configured a linux bridge (vlan0) for virtual machines in
/etc/network/interfaces.d/vlan0. The usual configuration including to
start dnasmasq as a dhcp and dns server for that network.
With 17.10 that fails, systemd can't start networking.service
# systemctl
This does definitely not "remove the problem" here.
As said before, installing all guest additions makes the ubuntu guest
run X11 instead of wayland, it then just looks as if the problem had
gone. This might help in terms of usability, but not if you want to use
and test wayland (e.g. to prepare
Public bug reported:
Hi,
I just tried to install 17.10 with the regular ubuntu desktop image, and
ran into the problem that the desktop freezes right after entering the
password at login (see #1726842 ).
I then went into the recovery root session at the console and did an
apt-get upgrade, which
Public bug reported:
Hi,
systemd still kills the swap device sometimes.
I typically avoid lvm and prefer the partition scheme like
/dev/sda1 unencrypted boot
/dev/sda2 luks-encrypted swap
/dev/sda3 luks-encrypted /root
and haven an /etc/crypttab like
sda2_crypt
Public bug reported:
Hi,
just ran into a problem:
I have some software dealing with openssl and some crypto stuff. I
recently extended it to read bytes from /dev/hwrng if it exists, because
the software should run on a Raspberry Pi as well. The Raspi does not
have a clock and usually no user
Public bug reported:
Hi,
I was just debugging why so many of my virtual machines have so much trouble in
getting DNS responses and found, that the dnsmasq on the host machine, which is
the DNS resolver for all machines asks the three (!) name servers given in
/etc/resolv.conf, which is the
Public bug reported:
Hi,
I have a problem with some of my ubuntu machines, they are sometimes
stuck in a boot process, issuing "a start job is running..." in an
endless loop.
I have activated systemd's debug console (terminal 9) to find the
problem, but found the debug console as almost
Public bug reported:
Hi,
on several of my machines (encrypted, 16.04 and 16.10) it *sometimes* happens,
that systemd is stuck in booting telling
"A start job is running for dev-mapp...ypt.device (5min 40s / no limit)"
(endless loop, counting the time up)
(only) rebooting helps, but that's
Public bug reported:
Upgrade 15.10 -> 16.04 failed
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: systemd-sysv 229-3ubuntu2
ProcVersionSignature: Ubuntu 4.4.0-16.32-generic 4.4.6
Uname: Linux 4.4.0-16-generic x86_64
ApportVersion: 2.20.1-0ubuntu1
Architecture: amd64
Date: Wed Apr 6
Public bug reported:
Hi, this is a splitoff of bug #1506139
I'm usually using a setup with three partitions on a disk
Partition 1: plain ext4 boot partition mounted on /boot
Partition 2: luks-encrypted swap
Partition 3: luks-encrypted btrfs for / /home ...
but on one of my systems the boot
Public bug reported:
Hi,
I am using evince under XFCE4 (xubuntu) with apparmore. Every time I
start it the desktop complains about rule violations, i.e. evince
reading /etc/xfce4/defaults.list .
Should be allowed in
/etc/apparmor.d/usr.bin.evince
regards
ProblemType: Bug
DistroRelease:
ubuntu-bug does not work. It complains that gnome-control-center is not
installed and thus data cannot be collected.
Which is correct, as I said, I've installed xubuntu. And, I doubt that
it has anything at all to do with X11 and above, since - as I said - it
is a console problem. Why did you
Maybe that's why you don't understand the bug.
Until ubuntu 11.10 there was a lot for nautilus -n to do, i.e. handle
the desktop background, place the icons, make the icons thumbnails of
the contents. The bug is that this functionality is gone since 12.04.
But obviously if you don't know about
And that's what it was doing in XFCE sessions up to ubuntu 11.10.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1008068
Title:
Gnome program not running under XFCE since 12.04
xfdesktop complains that -q is an unknown option.
it does not change nautilus' behaviour in any way.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1008068
Title:
Gnome program
Yup, that works. Desktop becomes black.
I can start nautilus -n then.
Until 11.10 the desktop did not need to be stopped before.
So it is a problem of XFCE. If gnome support is enabled in the settings,
it should not start xfdesktop before nautilus. That's the problem to
solve.
--
You received
Public bug reported:
This is a renewal of bug #994240 . Since upgrade to ubuntu 12.04 one of
the gnome support functions of XFCE is broken, i.e. nautilus -n does not
work anymore.
However, bug #994240 is constantly closed by a guy named Sebastien
Bacher who ignorantly insists on that this is
But still exists after upgrade to 12.04
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to empathy in Ubuntu.
https://bugs.launchpad.net/bugs/986689
Title:
Can't connect to jabber: missing password
To manage notifications about this
I still don't see how to generate an „auth client log”.
The referenced web page does not even contain the word auth , and I
don't see where I could click on mission control
If you need an auth client log, tell me how to generate it. And tell it
in a comprehensible way.
--
You received this
What sort of nonsense is that?
It is obviously a bug and I am pretty sure about that.
What makes you believe that this is not a bug report?
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to nautilus in Ubuntu.
Public bug reported:
Hi,
when running XFCE under ubuntu, desktop functionality is by default
drastically reduced, e.g. no dynamic icons for documents on the desktop.
You can usually get this missing functionality by enabling the Gnome
Desktop startup in the XFCE settings, which then starts
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/994240
Title:
Gnome Desktop functions for XFCE gone after upgrade
To manage notifications about this bug go to:
I really hate to upload confidential/personal data such as account names
into publicly available Bug databases.
I've therefore filtered out the names of the other accounts that do not
cause any trouble from the log, and replaced the name of the jabber
server causing trouble with somejabberserver.
What's an „auth client log” and how would I get it?
This whole telepathy/empathy system with it's dbus connections is
overcomplicated and broken by design. I still do not understand which
and how many compontents are involved and how to debug them.
--
You received this bug notification because
Public bug reported:
Hi,
I tried to connect to a jabber account (account and password OK, working
with other clients), but Empathy always complains about a „Network
error”.
Following http://telepathy.freedesktop.org/wiki/Debugging I did some
further debugging on telepathy-gabble, which says
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to empathy in Ubuntu.
https://bugs.launchpad.net/bugs/986689
Title:
Can't connect to jabber: missing password
To manage notifications about this bug go to:
No. This bug here always affects the whole image. And I can't reproduce
bug 931174 here.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.
https://bugs.launchpad.net/bugs/310349
Title:
eog does not handle nonadobe CMYK JPEGs
Jamie,
Am 07.12.2011 um 15:31 schrieb Jamie Strandboge:
Hadmut, we have been through this before--
Yes. And I would highly appreciate if you'd remember that last time I
finally won because of the better arguments.
You could save your and my valuable time if you wouldn't start the same
Public bug reported:
Hi,
evince comes with apparmor profiles.
1) The profiles are incomplete/outdated. Kernel keeps complaining because
evince tries to read from udev which has been moved to /run/udev by some ubuntu
berserks:
Dec 5 16:10:19 sodom kernel: [24711.331270] type=1400
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evince in Ubuntu.
https://bugs.launchpad.net/bugs/900324
Title:
Faulty/useless apparmor profile
To manage notifications about this bug go to:
Public bug reported:
Hi,
I am desperately trying to get an external commercial Linux program
(Bibble5) run under Oneiric, which was still working under Natty.
One of the problems is that the program tries to find the 32 bit
libraries under /usr/lib/i386-linux-gnu/gtk-2.0, which is effectively
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gtk+2.0 in Ubuntu.
https://bugs.launchpad.net/bugs/886936
Title:
/usr/lib/i386-linux-gnu/gtk-2.0 empty
To manage notifications about this bug go to:
This is another one of those many aspects where oneiric is a severe
regression compared to natty. I am close to removing oneiric from all my
machines and reinstalling 11.04, which was significantly better in every
aspect.
--
You received this bug notification because you are a member of Ubuntu
Public bug reported:
Hi,
after upgrading to oneiric and using gnome-classic, the behaviour of
gnome-screensaver has changed. Although the gconf-setting
/apps/gnome-screensaver/lock_enabled = false
it locks the display when active, and I could not find a way to change
this, since the gnome
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-screensaver in Ubuntu.
https://bugs.launchpad.net/bugs/884764
Title:
gnome-screensaver locks screen even if it shouldn't
To manage notifications about this bug go to:
What a mess is that? Some tools use gconf, some use gsettings, some use
dconf . This is even more confusing than MSWindows. And then the tools
are hidden somewhere else where you don't find them.
Thanks, that was working.
I am currently more than confused, since I tried unity, which was not
Under launchers (german: Starter) there is no entry for starting a
Terminal , and the +-Button is disabled, so it is not possible to add a
new entry.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-control-center in Ubuntu.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/832674
Title:
gdm is degenerating
To manage notifications about this bug go to:
Public bug reported:
Hi,
until recently gdm was a flexible and easy to configure desktop manager,
with a gdm.conf where you could easily configure different options, with
a good graphical frontend to configuration, and it offered options for
locales and keyboard mappings at login time. gdm was
Strange.
I just installed oneiric alpha-3 (32bit alternate) on a notebook, apt-
upgraded to latest packets, installed cups-pdf, visited the example page
http://www.economist.com/node/17723223/print with firefox, printed to
PDF printer, and displayed with evince.
Astonishingly, evince displayed
Public bug reported:
Hi, the gnome invest applet cannot be put to the gnome panel. When
starting it directly it issues the error message
2011-08-05 18:42:02.531749: ERROR: Could not load the stocks from
/home/hadmut/.gnome2/invest-applet/stocks.pickle: [Errno 2] No such file
or directory:
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gnome-applets in Ubuntu.
https://bugs.launchpad.net/bugs/821580
Title:
gnome invest applet does not start
To manage notifications about this bug go to:
I just tried to install oneiric on a notebook (alpha-2 alternate
installer) which failed due to bugs in the installation procedure.
Will have some delay to test this...
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to poppler in
The pdf2ps command of my natty installation already uses
-sDEVICE=ps2write
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to poppler in Ubuntu.
https://bugs.launchpad.net/bugs/817049
Title:
gs renders images as black boxes when
Just allow me a few days, I'm completely busy at the moment.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to poppler in Ubuntu.
https://bugs.launchpad.net/bugs/817049
Title:
gs renders images as black boxes when generating PDF
Can anyone please point out why I am asked on saturday to perform
further tests, and on monday the report is set to „invalid” ?
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to poppler in Ubuntu.
https://bugs.launchpad.net/bugs/817049
Public bug reported:
Hi,
for several days now evince displays PDF files generated by printing
with firefox to cupspdf incorrectly. It renders embedded graphics as
black boxes (example attached).
I still can print and display these files with okular correctly, so I
guess it is a problem of
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evince in Ubuntu.
https://bugs.launchpad.net/bugs/817064
Title:
evince rendering graphics as black boxes
To manage notifications about this bug go to:
** Attachment added: Example PDF
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/817064/+attachment/2236614/+files/job_622-Doctoral_degrees__The_disposable_academic___The_Economist.pdf
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is
Yup, seems to work with 11.04.
regards
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution in Ubuntu.
https://bugs.launchpad.net/bugs/663906
Title:
Can't add google calendar
--
desktop-bugs mailing list
Is anyone out there taking any notice of this bug?
** Package changed: librsvg (Ubuntu) = gdk-pixbuf (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to librsvg in Ubuntu.
https://bugs.launchpad.net/bugs/779665
Title:
Unable
Public bug reported:
Hi,
I am using a commercial image processing program named bibble5, which
was working well for more than a year under ubuntu. After upgrading
ubuntu to 11.04, bibble5 crashes when run under the 64 bit version of
ubuntu (still works with the 32 bit version of ubuntu).
The
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to librsvg in Ubuntu.
https://bugs.launchpad.net/bugs/779665
Title:
Unable to load image-loading module: /usr/lib/gdk-
pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so
--
desktop-bugs
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evince in ubuntu.
https://bugs.launchpad.net/bugs/712184
Title:
crashes with error message Error (0): Call to Object...
--
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
Public bug reported:
Binary package hint: evince
Hi,
when I try to display the PDF available from
http://www.poepping.de/fotoversicherung/Aenderungsantrag-FORMULAR-
Fotoversicherung-2010-GE.pdf , evince aborts with
Error (0): Call to Object where the object was type 4, not the expected type 6
Public bug reported:
Binary package hint: evolution
Hi,
evolution has an option to add a google calendar, which worked with
10.04.
Now I've upgraded to 10.10 and I can't add a google calendar anymore
(fetching the available calendars for selection still works), simply
because I can't press the
--
Can't add google calendar
https://bugs.launchpad.net/bugs/663906
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution in ubuntu.
--
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
Public bug reported:
Binary package hint: f-spot
Hi,
when I use F-Spot to copy files (Nikon D300s RAW files) from memory
cards to my computers (problems seen on two different machines, desktop
and netbook), three different problems occur not always, but quite
often:
* picture file copied
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/42894250/Dependencies.txt
** Attachment added: XsessionErrors.txt
http://launchpadlibrarian.net/42894251/XsessionErrors.txt
--
f-spot imports picture files incompletely
https://bugs.launchpad.net/bugs/554062
You received
Public bug reported:
Binary package hint: gnome-control-center
Hi,
when trying to view directories with TTF font files (e.g.
/usr/share/fonts/truetype/freefont), my nautilus shows a correct
thumbnail only for two or three of these fonts and just the standard
symbol for all other fonts, without
Public bug reported:
Binary package hint: gnome-control-center
Hi,
when viewing font file directories with thunar (e.g.
/usr/share/fonts/truetype/freefont) and mouseklicking a ttf file, a
window opens and shows font samples.
Unfortunately the examples contain only 0-9, a-z, A-Z and .:,;(*!?)
jaunty 9.04 x86
--
gnome-thumbnail-font couldn't process file: Reason: Took too much time to
process.
https://bugs.launchpad.net/bugs/431261
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.
--
desktop-bugs mailing list
Pedro Villavicencio wrote:
Thanks for the report but you can actually do this, If you add a
directory with hidden files brasero shows you a file list on the bottom
of the burning window it says : Show the filtered file list and the
number of hidden files or filtered on your directory,
Nope,
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/27863614/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/27863615/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/27863616/ProcStatus.txt
--
basero does
Public bug reported:
Binary package hint: brasero
Hi,
when adding directories to the list of things to be burned on a DVD, it is not
possible to remove hidden subdirectories.
E.g. if I want to add my home directory, but then to remove $HOME/.cache the
directory .cache is not listed in the
Public bug reported:
Binary package hint: gdm
Hi,
this is a rather cosmetical bug:
I just upgraded to jaunty and did some tests. When enabling remote X11
login (xdmcp) on gdm, the login screen shows a debian logo.
Well, it _should_ be an ubuntu logo.
regards
** Affects: gdm (Ubuntu)
That's how it looks on my screen with BestFit. When playing around
with the zoom factor, I sometimes get the full header (e.g. with 125%),
sometimes only parts.
** Attachment added: evince_hadmut1.png
http://launchpadlibrarian.net/20833935/evince_hadmut1.png
--
evince shows A4 dvi files in
Have a look at this (zoom 50%): There's just half of the header, and
only o n oe of John Doe, i.e. only those characters are printed,
that fit into the box.
regards
** Attachment added: evince_hadmut2.png
http://launchpadlibrarian.net/20833952/evince_hadmut2.png
--
evince shows A4 dvi
Ah, and btw., I am using an AMD64 System. I just tried a notebook with
i386 Ubuntu, where I did not see that problem.
--
evince shows A4 dvi files in wrong format
https://bugs.launchpad.net/bugs/312318
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is
Public bug reported:
Binary package hint: evince
Hi,
I am writing letters with latex and the KOMA scrlttr2 package. While
other programs like kdvi display the dvi files correctly, evince cuts
away the top of the page with the letter head. See the attached dvi file
and compare with kdvi output.
** Attachment added: example dvi file
http://launchpadlibrarian.net/20803780/briefmuster.dvi
--
evince shows A4 dvi files in wrong format
https://bugs.launchpad.net/bugs/312318
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evince
** Attachment added: sample JPEG
http://launchpadlibrarian.net/20623885/export-00407.jpg
--
eog does not handle nonadobe CMYK JPEGs correctly
https://bugs.launchpad.net/bugs/310349
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to eog
Public bug reported:
Binary package hint: eog
Hi,
eog does not handle JPEG images with a non-adobe CMYK color space
correctly.
Please have a look atman jpegtopnm and its options -adobe -notadobe
. Those images that require -notadobe are not treated correctly by eog,
it looks as if they
Public bug reported:
Binary package hint: gdm
Hi,
on one of my ubuntu machines it sometimes happens that the login
procedure hangs after entering the password. strace shows that
gdmgreeter is stuck in a poll loop. Occured on both dapper and now on
edgy.
regards
Hadmut
** Affects: gdm (Ubuntu)
It seems as if the usage of pam_tmpdir
/etc/pam.d/common-session:
sessionoptional pam_tmpdir.so
had caused the problem. After removing that logging in worked three
times.
Some incompatibility between gdm and libpam?
--
gdmgreeter hangs
https://launchpad.net/bugs/68136
--
Public bug reported:
Binary package hint: libhal1
Hi,
when starting Gnome or XFCE, the volume manager automatically opens a
windows asking for a password, if the hard disk contains encrypted
devices. This is annoying.
I tracked this down to libhal. To ignore such a partition, the attribute
78 matches
Mail list logo
