date:20150529

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: network-manager (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1440607

Title:
  network-manager suddenly using VPN nameserver for single domain only,
  not updating resolv.conf

Status in network-manager package in Ubuntu:
  Confirmed

Bug description:
  When connecting to a VPN using network manager (openconnect), DNS
  resolution stops working for me.

  This is a regression since 14.10 (and vivid in the last few weeks)
  where it worked as before.  Verified working on a fresh install of
  14.10, upgraded and then verified broken on 15.04.

  Under 14.10 (utopic), the VPN name-servers were used for the entire
  system.

  Under 15.04 (vivid), as of this week, it uses the VPN name-servers
  only for the VPN domain (in this case, au.wordomain.com) and
  attempts to use the LAN name-server for all other names.

  This breaks for two reasons

   (1) The VPN domain (which is automatically retrieved from the VPN
  server, and is not manually set, and cannot be overridden) is not the
  only domain I required overridden to get internal DNS.

   (2) The local nameserver access is blocked/firewalled by the
  openconnect policy, and thus even global resolution stops workling.


  
  NetworkManager[836]: info VPN connection 'Work VPN' (IP Config Get) reply 
received.
  NetworkManager[836]: info VPN connection 'Work VPN' (IP4 Config Get) reply 
received.
  NetworkManager[836]: info VPN connection 'Work VPN' (IP6 Config Get) reply 
received.
  NetworkManager[836]: info VPN Gateway: 101.10.10.101
  NetworkManager[836]: info Tunnel Device: vpn0
  NetworkManager[836]: info IPv4 configuration:
  NetworkManager[836]: info   Internal Address: 10.131.11.21
  NetworkManager[836]: info   Internal Prefix: 21
  NetworkManager[836]: info   Internal Point-to-Point Address: 10.131.11.21
  NetworkManager[836]: info   Maximum Segment Size (MSS): 0
  NetworkManager[836]: info   Forbid Default Route: no
  NetworkManager[836]: info   Internal DNS: 10.97.11.12
  NetworkManager[836]: info   Internal DNS: 10.97.12.12
  NetworkManager[836]: info   DNS Domain: 'au.workdomain.com'
  NetworkManager[836]: info IPv6 configuration:
  NetworkManager[836]: info   Internal Address: 2406:cdef:abc:dead:beef::13
  NetworkManager[836]: info   Internal Prefix: 64
  NetworkManager[836]: info   Internal Point-to-Point Address: 
2406:cdef:abc:dead:beef::13
  NetworkManager[836]: info   Maximum Segment Size (MSS): 0
  NetworkManager[836]: info   Forbid Default Route: no
  NetworkManager[836]: info   DNS Domain: 'au.workdomain.com'
  openconnect[2710]: Connected vpn0 as 10.131.11.21 + 
2406:cdef:abc:dead:beef::13/64, using SSL
  NetworkManager[836]: info (vpn0): link connected
  NetworkManager[836]: info VPN connection 'Work VPN' (IP Config Get) 
complete.
  NetworkManager[836]: info VPN plugin state changed: started (4)
  NetworkManager[836]: info NetworkManager state is now CONNECTED_LOCAL
  NetworkManager[836]: info NetworkManager state is now CONNECTED_GLOBAL
  NetworkManager[836]: info Policy set 'Work VPN' (vpn0) as default for IPv6 
routing and DNS.
  NetworkManager[836]: info Writing DNS information to /sbin/resolvconf
  dnsmasq[1485]: setting upstream servers from DBus
  dnsmasq[1485]: using nameserver 220.233.0.4#53
  dnsmasq[1485]: using nameserver 220.233.0.3#53
  dnsmasq[1485]: using nameserver 10.101.11.12#53 for domain au.workdomain.com
  dnsmasq[1485]: using nameserver 10.101.11.12#53 for domain 10.in-addr.arpa
  dnsmasq[1485]: using nameserver 10.101.12.12#53 for domain au.workdomain.com
  dnsmasq[1485]: using nameserver 10.101.12.12#53 for domain 10.in-addr.arpa

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1440607/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1174678] [NEW] Full screen zoom fails in Mousepad and Leafpad text editors

You have been subscribed to a public bug:

I'm not sure if this is a Unity issue or an editor issue, but the same
problem on 2 different editors would suggest the former. Open either of
these editors. Double-click on the title bar to zoom. (Once you do this,
you may never again be able to shrink the window again, beyond a small
fractional amount, because you will never again be able to reach the
bottom border with the up-and-down resize arrow; you would need to
reinstall the OS!)

Zoom works fine. Now close the editor.

Launch it again. This time, it tries to come up zoomed, which makes
sense because that was its most recent state. But the last line of text
at the bottom of the screen shows through. (In other words, it would be
a full-screen zoom, but the last line is still the desktop background.)
So you need to double-click on the title bar twice, once to shrink and
another time to zoom again. The second time, it actually zooms
correctly. When you open another file or repeat the experiment, you need
to quadruple-click all over again.

In addition to being very awkward, this is actually quite confusing,
because if you have zoomed and unzoomed editor windows open, the last
line of text from document A shows up at the bottom of document B.

This problem did not happen on i386 12.04 several months ago. Sorry, I
no longer have the specific details. Anyway, it happens now on AMD64
12.04. Reinstalling the OS fixed it for a few sessions. Then it happened
again. Perhaps zooming triggers it.

I have some sense that this bug relates to the fact that Unity has its
own title bar at the top, so somehow the editor is getting the wrong
idea about how big full-screen really is.

The reinstall-the-OS-to-resize issue is perhaps another bug, but I'm not
going to open another report at the moment because I suspect that it's
due to the same root cause.

ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: mousepad 0.2.16-5ubuntu1
ProcVersionSignature: Ubuntu 3.5.0-27.46~precise1-generic 3.5.7.7
Uname: Linux 3.5.0-27-generic x86_64
ApportVersion: 2.0.1-0ubuntu17.2
Architecture: amd64
Date: Tue Apr 30 16:21:11 2013
EcryptfsInUse: Yes
ExecutablePath: /usr/bin/mousepad
InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release amd64 
(20130213)
MarkForUpload: True
ProcEnviron:
 PATH=(custom, no user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: mousepad
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: unity (Ubuntu)
 Importance: Undecided
 Status: Incomplete

** Affects: mousepad (Ubuntu)
 Importance: Undecided
 Status: Incomplete


** Tags: amd64 apport-bug precise running-unity
-- 
Full screen zoom fails in Mousepad and Leafpad text editors
https://bugs.launchpad.net/bugs/1174678
You received this bug notification because you are a member of Desktop 
Packages, which is subscribed to unity in Ubuntu.

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1449051] Re: Upower doesn't handle bluetooth mice properly

** Bug watch added: Debian Bug tracker #772095
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=772095

** Also affects: upower (Debian) via
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=772095
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to upower in Ubuntu.
https://bugs.launchpad.net/bugs/1449051

Title:
  Upower doesn't handle bluetooth mice properly

Status in Upower:
  Fix Released
Status in upower package in Ubuntu:
  Fix Committed
Status in upower package in Debian:
  Unknown

Bug description:
  I have a bluetooth Logitech M557, and it is being mis-detected by
  Upower as a battery instead of a mouse:

  Device: /org/freedesktop/UPower/devices/battery_hid_00o1fo20of5oabob5_battery
native-path:  hid-00:1f:20:f5:ab:b5-battery
model:Bluetooth Mouse M557
power supply: no
updated:  Mon 27 Apr 2015 10:05:22 AM EDT (13 seconds ago)
has history:  yes
has statistics:   yes
battery
  present: yes
  rechargeable:yes
  state:   discharging
  warning-level:   none
  energy:  0 Wh
  energy-empty:0 Wh
  energy-full: 0 Wh
  energy-full-design:  0 Wh
  energy-rate: 0 W
  percentage:  100%
  capacity:100%
  icon-name:  'battery-full-symbolic'
History (charge):
  1430143522100.000 discharging

  
  The patch available in the upstream bug improves the situation by parsing it 
as a hid device, but then mistakes it for a keyboard:
  https://bugs.freedesktop.org/show_bug.cgi?id=86510

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: upower 0.99.2-2
  ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
  Uname: Linux 3.19.0-15-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Apr 27 10:04:20 2015
  InstallationDate: Installed on 2013-11-26 (516 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 
(20131016.1)
  SourcePackage: upower
  UpgradeStatus: Upgraded to vivid on 2015-03-07 (50 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/upower/+bug/1449051/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1448834] Re: mouse battery not shown after upgrade

** Bug watch added: Debian Bug tracker #785725
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=785725

** Also affects: upower (Debian) via
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=785725
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to upower in Ubuntu.
https://bugs.launchpad.net/bugs/1448834

Title:
  mouse battery not shown after upgrade

Status in upower package in Ubuntu:
  Fix Committed
Status in upower package in Debian:
  Unknown

Bug description:
  In Xubuntu 14.04 and 14.10 the power manager dropdown menu showed the
  battery level in my wireless logitech mouse.  However after upgrading
  to 15.04 the mouse battery status is not shown.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: xfce4-power-manager 1.4.3-0ubuntu1
  ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
  Uname: Linux 3.19.0-15-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Sun Apr 26 19:49:19 2015
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: xfce4-power-manager
  UpgradeStatus: Upgraded to vivid on 2015-04-23 (3 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/upower/+bug/1448834/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1458875] Re: Upower report wrong level of bluetooth mouse battery and battery level icon is wrong

*** This bug is a duplicate of bug 1449051 ***
https://bugs.launchpad.net/bugs/1449051

** This bug has been marked a duplicate of bug 1449051
   Upower doesn't handle bluetooth mice properly

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to upower in Ubuntu.
https://bugs.launchpad.net/bugs/1458875

Title:
  Upower report wrong level of bluetooth mouse battery and battery level
  icon is wrong

Status in upower package in Ubuntu:
  New

Bug description:
  On Ubuntu 15.04 my bluetooth mouse gives this message:

  May 26 15:12:45 hp850ssd upowerd[1071]: (upowerd:1071): UPower-Linux-
  WARNING **: no valid voltage value found for device
  
/sys/devices/pci:00/:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/bluetooth/hci0/hci0:11/0005:03F0:044C.0002/power_supply/hid-00:02:76:4f:9b
  :cb-battery, assuming 10V

  My mouse has two AA battery, so level is wrong and the battery icon
  report wrong laptop status until I click with right button on battery
  icon

  This is upower -d output

  Device: /org/freedesktop/UPower/devices/line_power_AC
native-path:  AC
power supply: yes
updated:  mar 26 mag 2015 15:12:38 CEST (816 seconds ago)
has history:  no
has statistics:   no
line-power
  warning-level:   none
  online:  yes
  icon-name:  'ac-adapter-symbolic'

  Device: /org/freedesktop/UPower/devices/battery_BAT0
native-path:  BAT0
vendor:   Hewlett-Packard
model:Primary
serial:   00585 2014/03/10
power supply: yes
updated:  mar 26 mag 2015 15:24:21 CEST (113 seconds ago)
has history:  yes
has statistics:   yes
battery
  present: yes
  rechargeable:yes
  state:   fully-charged
  warning-level:   none
  energy:  121,57 Wh
  energy-empty:0 Wh
  energy-full: 124,18 Wh
  energy-full-design:  124,18 Wh
  energy-rate: 13,6686 W
  voltage: 12,601 V
  percentage:  97%
  capacity:100%
  technology:  lithium-ion
  icon-name:  'battery-full-charged-symbolic'

  Device: /org/freedesktop/UPower/devices/battery_hid_00o02o76o4fo9bocb_battery
native-path:  hid-00:02:76:4f:9b:cb-battery
model:HP Touch to Pair Mouse
power supply: no
updated:  mar 26 mag 2015 15:25:46 CEST (28 seconds ago)
has history:  yes
has statistics:   yes
battery
  present: yes
  rechargeable:yes
  state:   discharging
  warning-level:   action
  energy:  0 Wh
  energy-empty:0 Wh
  energy-full: 0 Wh
  energy-full-design:  0 Wh
  energy-rate: 0 W
  percentage:  0%
  capacity:100%
  icon-name:  'battery-caution-symbolic'

  Device: /org/freedesktop/UPower/devices/DisplayDevice
power supply: yes
updated:  mar 26 mag 2015 15:01:45 CEST (1469 seconds ago)
has history:  no
has statistics:   no
battery
  present: yes
  state:   fully-charged
  warning-level:   none
  energy:  121,57 Wh
  energy-full: 124,18 Wh
  energy-rate: 13,6686 W
  percentage:  97%
  icon-name:  'battery-full-charged-symbolic'

  Daemon:
daemon-version:  0.99.2
on-battery:  no
lid-is-closed:   no
lid-is-present:  yes
critical-action: HybridSleep

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/upower/+bug/1458875/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1459949] [NEW] Crash réccurent de FF

2015-05-29 Thread Alexandre FLEURY

Public bug reported:

Bonjour,


Je suis bien embêté FF plante toute les dix minutes. J'ai tenté une 
réinstallation, un redémarage en mode sans echec rien y fait.
Je suis à jour sur mon ubuntu 14.04.
Dernier rapport de plantage: 
https://crash-stats.mozilla.com/report/index/b5148dc5-eb3a-43b0-85f5-f2c7a2150529

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: firefox 38.0.5~b3+build1-0ubuntu0.14.04.1
ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
Uname: Linux 3.13.0-40-generic x86_64
NonfreeKernelModules: nvidia
AddonCompatCheckDisabled: False
ApportVersion: 2.14.1-0ubuntu3.11
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  retroschlampe   4498 F pulseaudio
 /dev/snd/pcmC0D0p:   retroschlampe   4498 F...m pulseaudio
BuildID: 20150520175439
Channel: Unavailable
CurrentDesktop: GNOME
Date: Fri May 29 10:05:33 2015
Extensions: extensions.sqlite corrupt or missing
ForcedLayersAccel: False
IfupdownConfig:
 # interfaces(5) file used by ifup(8) and ifdown(8)
 auto lo
 iface lo inet loopback
IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini 
or extensions.sqlite)
InstallationDate: Installed on 2014-11-14 (195 days ago)
InstallationMedia: Ubuntu-GNOME 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
Locales: extensions.sqlite corrupt or missing
MostRecentCrashID: bp-b5148dc5-eb3a-43b0-85f5-f2c7a2150529
PrefSources:
 prefs.js
 
/usr/share/mozilla/extensions/{ec8030f7-c20a-464f-9b0e-13a3a9e97384}/ubu...@ubuntu.com/defaults/preferences/001ubuntu-gnome-mods.js
ProcEnviron:
 TERM=xterm-256color
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=set
 LANG=fr_FR.UTF-8
 SHELL=/bin/bash
Profiles: Profile0 (Default) - LastVersion=38.0.5/20150520175439 (In use)
RelatedPackageVersions:
 browser-plugin-vlc 2.0.6-2
 totem-mozilla  3.10.1-1ubuntu4.1
 gnome-shell3.12.2-0ubuntu0~trusty2
 rhythmbox-mozilla  3.0.3-1ubuntu2~trusty1
 adobe-flashplugin  1:20150512.1-0trusty1
RunningIncompatibleAddons: False
SourcePackage: firefox
Themes: extensions.sqlite corrupt or missing
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 10/08/2008
dmi.bios.vendor: Lenovo
dmi.bios.version: 10CN38WW
dmi.board.asset.tag: Lenovo Assert TAG
dmi.board.name: INVALID
dmi.board.vendor: Lenovo
dmi.board.version: 10CN38WW
dmi.chassis.asset.tag: Lenovo Assert TAG
dmi.chassis.type: 10
dmi.chassis.vendor: Lenovo
dmi.chassis.version: 10CN38WW
dmi.modalias: 
dmi:bvnLenovo:bvr10CN38WW:bd10/08/2008:svnLenovo:pnINVALID:pvrLenovoIdeaPadY530:rvnLenovo:rnINVALID:rvr10CN38WW:cvnLenovo:ct10:cvr10CN38WW:
dmi.product.name: INVALID
dmi.product.version: Lenovo IdeaPad Y530
dmi.sys.vendor: Lenovo

** Affects: firefox (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug gnome3-ppa third-party-packages trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1459949

Title:
  Crash réccurent de FF

Status in firefox package in Ubuntu:
  New

Bug description:
  Bonjour,

  
  Je suis bien embêté FF plante toute les dix minutes. J'ai tenté une 
réinstallation, un redémarage en mode sans echec rien y fait.
  Je suis à jour sur mon ubuntu 14.04.
  Dernier rapport de plantage: 
https://crash-stats.mozilla.com/report/index/b5148dc5-eb3a-43b0-85f5-f2c7a2150529

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: firefox 38.0.5~b3+build1-0ubuntu0.14.04.1
  ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
  Uname: Linux 3.13.0-40-generic x86_64
  NonfreeKernelModules: nvidia
  AddonCompatCheckDisabled: False
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  retroschlampe   4498 F pulseaudio
   /dev/snd/pcmC0D0p:   retroschlampe   4498 F...m pulseaudio
  BuildID: 20150520175439
  Channel: Unavailable
  CurrentDesktop: GNOME
  Date: Fri May 29 10:05:33 2015
  Extensions: extensions.sqlite corrupt or missing
  ForcedLayersAccel: False
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  IncompatibleExtensions: Unavailable (corrupt or non-existant 
compatibility.ini or extensions.sqlite)
  InstallationDate: Installed on 2014-11-14 (195 days ago)
  InstallationMedia: Ubuntu-GNOME 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
  Locales: extensions.sqlite corrupt or missing
  MostRecentCrashID: bp-b5148dc5-eb3a-43b0-85f5-f2c7a2150529
  PrefSources:
   prefs.js
   
/usr/share/mozilla/extensions/{ec8030f7-c20a-464f-9b0e-13a3a9e97384}/ubu...@ubuntu.com/defaults/preferences/001ubuntu-gnome-mods.js
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  Profiles: Profile0 (Default) - LastVersion=38.0.5/20150520175439 (In use)
  RelatedPackageVersions:
   browser-plugin-vlc 2.0.6-2

[Desktop-packages] [Bug 1451704] Re: upgradeing to ubuntu 15.05

2015-05-29 Thread matthew

** Changed in: lightdm (Ubuntu)
 Assignee: matthew (nitro9630) = (unassigned)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1451704

Title:
  upgradeing to ubuntu 15.05

Status in lightdm package in Ubuntu:
  New

Bug description:
  It installs fine but when you restart the computer  ubuntu does not
  come back  it just stays  a black screen  and I left it over night
  and it was still in the black screen  so i had to reinstall 12.04 ver
  again  and upgrade  up to 14.10 for the threed time  im not upgradeing
  to 15.04 until i know it works  like 14.10 ver  softwere  .

  
   i want to be at the current ver  but it keeps crashing my computer 

  im staying at 14.10 version  thanks  any q's  
  Please e-mail me at  nitro9...@gmail.com

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1451704/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1459613] Re: connecting 2x 4k screens on a Dell XPS12 (9Q33): compiz crashed with SIGSEGV in GLTexture::matrix()

2015-05-29 Thread D

I wouldn't say it's a workaround, after I installed en ran metacity 
--replace, I experienced;
- the unity task bar was gone, as well as the launchbar
- the keyboard wasn't recognized anymore (?)
- When I killed the process metacity, the unity desktop didn't return. 

For troubleshoot purposes (as I saw all three screens), it's usefull I
think. But it's not a workaround as it's unusable (at least at the way I
used metacity).

I will look at the stuff Daniel mentioned (although I don't know what
he's talking about), but it will be after the weekeind because we have a
big network migration today and the whole weekend.

D

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to compiz in Ubuntu.
https://bugs.launchpad.net/bugs/1459613

Title:
  connecting 2x 4k screens on a Dell XPS12 (9Q33): compiz crashed with
  SIGSEGV in GLTexture::matrix()

Status in Compiz:
  New
Status in compiz package in Ubuntu:
  Triaged

Bug description:
  this is a new bug report following #1455598

  The relevant details i think are;
  - I own a Dell XPS12 (9Q33) and recently i have had 2 external monitors 
hooked to that through the (mini) display ports. The Screens are from the type 
Dell P2815Q. The screens have the ability to use Daisy chain 
(MST=https://en.wikipedia.org/wiki/DisplayPort#Multiple_displays_on_single_DisplayPort_connector),
 but it fails if i connect my laptop with 2x 4k external monitors. If i try it, 
it shows me some quick lines of text and returnes me to the login screen. If i 
turn _off_ the secondairy screen, it does login with 1 external monitor at 4k. 
If i setup the resolution to 2x 2,5k on the external monitors, it does work. 
Both at the office (where there are as well 2 Dell monitors with 2,5k 
resolution (2500xsomething) but from a different type). I think the problem is 
with the 4k resolutions. The setup does work on Windows 8.1 Pro, so i can use 
my main screen at 1920x1080 as 2x 4k external screens (although its on 30Hz, 
but thats due to the display port 1.2 specification i think). I ha
 ven't tried to connect the laptop with the main screen disabled/closed, so im 
gonna try that soon. But even if that works, i still think it's a bug as it 
seems to work on Windows.
  - - I've updates the bios to A08, 03/03/2015 (the output from dmidecode), but 
if i connect the laptop (with the laptopscreen enabled) to the 2x 4k screens, 
it just logs me out.
  - I've found that if i disable the laptopscreen and try to use 2x 4k, it 
works!. Everything is really small though.. ;-)
  - also, i found out that working with the 2x 4k screens (and the 
laptop-builtin-screen disabled), it goes into slumber or powerdown mode. If it 
does, i can't succesfully get it out and have to restart the machine. I'm gonna 
test some more on that, but it might be related to switching back to 3 screens 
afer coming out of slumber.

  ProblemType: Crash
  DistroRelease: Ubuntu 15.04
  Package: compiz-core 1:0.9.12.1+15.04.20150410.1-0ubuntu1
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Thu May 28 12:06:20 2015
  DistUpgraded: 2015-04-23 21:52:13,436 DEBUG enabling apt cron job
  DistroCodename: vivid
  DistroVariant: ubuntu
  ExecutablePath: /usr/bin/compiz
  ExecutableTimestamp: 1428704498
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Dell Device [1028:05e3]
  InstallationDate: Installed on 2015-03-04 (84 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Dell Inc. XPS 12-9Q33
  ProcCmdline: compiz
  ProcCwd: /home/fr3lld
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic 
root=UUID=8896779c-8f4d-4b4d-baae-5dd647d2572f ro quiet splash nomdmonddf 
nomdmonisw nomdmonddf nomdmonisw vt.handoff=7
  SegvAnalysis:
   Segfault happened at: 0x7f6c3e7b8c50 _ZNK9GLTexture6matrixEv:  mov
0x28(%rdi),%rax
   PC (0x7f6c3e7b8c50) ok
   source 0x28(%rdi) (0x0028) not located in a known VMA region (needed 
readable region)!
   destination %rax ok
  SegvReason: reading NULL VMA
  Signal: 11
  SourcePackage: compiz
  StacktraceTop:
   GLTexture::matrix() const () from 
/usr/lib/x86_64-linux-gnu/compiz/libopengl.so
   GLScreen::glPaintCompositedOutput(CompRegion const, GLFramebufferObject*, 
unsigned int) () from /usr/lib/x86_64-linux-gnu/compiz/libopengl.so
   PrivateGLScreen::paintOutputs(std::listCompOutput*, 
std::allocatorCompOutput* , unsigned int, CompRegion const) () from 
/usr/lib/x86_64-linux-gnu/compiz/libopengl.so

[Desktop-packages] [Bug 1451704] Re: upgradeing to ubuntu 15.05

2015-05-29 Thread matthew

the softwere installs fine but when i restart the computer  it just
stays on the ubuntu word  and i left it  like that  for a day  and it
never went into the desk top of the computer


im getting so frustrated with this software cannot get to the current software ?

i am thinking im will move to Linux windows  software  again  i head
ubuntu was easier to use  and i like it  but the internet keeps crashing
when i have one page open  try to read my e-mail  or look at the
internet page to looking for somethingI have to log on to my  mom
computer just to send you this bug add on  just  to get the help
because my computer is not working

and i  did try  and it does not work  for me ether

sudo apt-get install-f
sudo apt-get clean
sudo apt-get update   does not work  for me   I 

reinstalled it  about 15 times  now  it keeps crashing  when  when i
even have one thing open

im thinking to go back to linux windows or  windows 2000   just to get
the computer to work so i just can  check my e-mail

listing to my music  on the internet

** Also affects: lim (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1451704

Title:
  upgradeing to ubuntu 15.05

Status in lightdm package in Ubuntu:
  New
Status in lim package in Ubuntu:
  New

Bug description:
  It installs fine but when you restart the computer  ubuntu does not
  come back  it just stays  a black screen  and I left it over night
  and it was still in the black screen  so i had to reinstall 12.04 ver
  again  and upgrade  up to 14.10 for the threed time  im not upgradeing
  to 15.04 until i know it works  like 14.10 ver  softwere  .

  
   i want to be at the current ver  but it keeps crashing my computer 

  im staying at 14.10 version  thanks  any q's  
  Please e-mail me at  nitro9...@gmail.com

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1451704/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1445080] Re: Cellular data not activated after exiting flight mode

2015-05-29 Thread Alfonso Sanchez-Beato

@Will, @Tony:

The behaviour you see is probably related to indicator-network, so if
you open a bug please include that package too. I think the behaviour
has improved after latest landings for that package which fixed some
problems for PUK-blocked SIMs, although issues still remain.

I do not really think that the auto-unlocking change is related, as that
would not trigger after a reboot.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1445080

Title:
  Cellular data not activated after exiting flight mode

Status in the base for Ubuntu mobile products:
  In Progress
Status in network-manager package in Ubuntu:
  In Progress
Status in network-manager package in Ubuntu RTM:
  In Progress

Bug description:
  Cellular data is not activated in ~50% of the cases in arale after
  setting then unsetting flight mode.

  I obtained the attached log this way:

  1. Disabled wifi (to have less noise) and removed syslog (to make smaller the 
attached one)
  2. Reboot
  3. See cellular data is on: route is right, I have network access
  4. Set flight mode
  5. Unset flight mode
  6. Data is not restored even after waiting for a few minutes. ccmni0 
interface is down.

  list-modems shows that the modem is data-attached
  list-contexts output shows that no IP context has been activated

  Doing

  usr/share/ofono/scripts/activate-context 1
  sudo ip route add default dev ccmni0
  ping 8.8.8.8

  works and I receive the ping responses.

  $ system-image-cli -i
  current build number: 12
  device name: arale
  channel: ubuntu-touch/tangxi-vivid-proposed
  last update: 2015-04-16 08:06:39
  version version: 12
  version ubuntu: 20150416.0
  version device: 
a17b9320788e7215ddf123544a3a2b5a4fa61f0d5add83f393866e8c7a9155b0
  version custom: 20150416.0

  + NetworkManager 0.9.10.0-4ubuntu15~mtrudel1 (silo 29 atm)

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1445080/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1459931] [NEW] Impossible to change touchpad scrolling settings in Xubuntu 15.04

2015-05-29 Thread Brian

Public bug reported:

I have tried using synclient to set VertScrollDelta to negative values.
I have tried using Mouse and Touchpad In Settings Manager to reverse
the scrolling direction on SynPS/2 Synaptics Touchpad. I have also tried
disabling scrolling. Nothing works. Changes are not reflected in any
application. I think this is a critical must fix bug.

I have a dell inspiron 11-3147.

Description:Ubuntu 15.04 (Xubuntu)
Release:15.04

Fresh install. No programs installed.

ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: xorg 1:7.7+7ubuntu4
ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
Uname: Linux 3.19.0-18-generic x86_64
ApportVersion: 2.17.2-0ubuntu1
Architecture: amd64
CurrentDesktop: XFCE
Date: Thu May 28 22:49:00 2015
InstallationDate: Installed on 2015-05-29 (0 days ago)
InstallationMedia: Xubuntu 15.04 Vivid Vervet - Release amd64 (20150422.1)
SourcePackage: xorg
Symptom: display
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug vivid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1459931

Title:
  Impossible to change touchpad scrolling settings in Xubuntu 15.04

Status in xorg package in Ubuntu:
  New

Bug description:
  I have tried using synclient to set VertScrollDelta to negative
  values. I have tried using Mouse and Touchpad In Settings Manager
  to reverse the scrolling direction on SynPS/2 Synaptics Touchpad. I
  have also tried disabling scrolling. Nothing works. Changes are not
  reflected in any application. I think this is a critical must fix bug.

  I have a dell inspiron 11-3147.

  Description:  Ubuntu 15.04 (Xubuntu)
  Release:  15.04

  Fresh install. No programs installed.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Thu May 28 22:49:00 2015
  InstallationDate: Installed on 2015-05-29 (0 days ago)
  InstallationMedia: Xubuntu 15.04 Vivid Vervet - Release amd64 (20150422.1)
  SourcePackage: xorg
  Symptom: display
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1459931/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1457476] Re: Realtek ALC887-VD speakers don't mute when headphones are inserted

static void alc_fixup_gigabyte(struct hda_codec *codec,
 const struct hda_fixup *fix, int action)
{

if (action == HDA_FIXUP_ACT_PRE_PROBE) {

/* 
   use table for gigabyte board name to disable HP detection
  dmi_get_system_info(DMI_BOARD_NAME)  

*/
   snd_hda_apply_pincfgs(codec, hp_configs);
}
}


[ALC88X_FIXUP_GIGABYTE] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc_fixup_gigabyte,
},

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1457476

Title:
  Realtek ALC887-VD speakers don't mute when headphones are inserted

Status in alsa-driver package in Ubuntu:
  Confirmed

Bug description:
  I Have a Gigabyte GA 970a-DS3P motherboard with integrated audio
  chipset, which alsamixer reports to be an ALC887-VD.

  I uploaded the results of the ALSA script here:
  http://www.alsa-project.org/db/?f=bb6145b1a62c657c1af981b00dd2e3928b466dcb

  I have a line out connector on the back of the motherboard (along with
  line in and mic), and a headphones and a mic connector on the front of
  the PC.

  The problem is that when I plug in my headphones, the speakers (connected via 
the back connector) continue to play as well.
  Also, I haven't found yet a way to set the volume independently for the 
headphones and the speakers via the Gnome/Unity sound settings. I can only do 
that via alsamixer, where the Headphone control refers to the headphones, and 
Front to the speakers.
  --- 
  ApportVersion: 2.14.1-0ubuntu3.10
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  mardy 25530 F pulseaudio
   /dev/snd/controlC1:  mardy 25530 F pulseaudio
  CRDA:
   country RU:
(2402 - 2482 @ 40), (N/A, 20)
(5735 - 5835 @ 20), (N/A, 30)
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=37820918-257b-4b60-917f-94c55c98fa24
  InstallationDate: Installed on 2015-05-16 (4 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 
(20150218.1)
  MachineType: Gigabyte Technology Co., Ltd. To be filled by O.E.M.
  Package: linux (not installed)
  ProcFB:
   0 radeondrmfb
   1 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-37-generic 
root=UUID=5f77a868-de36-4b0b-91e9-bd05e1f93bf8 ro quiet splash iommu=soft 
vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-37.51~14.04.1-generic 3.16.7-ckt9
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-37-generic N/A
   linux-backports-modules-3.16.0-37-generic  N/A
   linux-firmware 1.127.12
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  Tags:  trusty
  Uname: Linux 3.16.0-37-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip disk lpadmin plugdev sambashare sudo vboxusers
  _MarkForUpload: True
  dmi.bios.date: 12/29/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: F2j
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: 970A-DS3P
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrF2j:bd12/29/2014:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rn970A-DS3P:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To be filled by O.E.M.
  dmi.product.version: To be filled by O.E.M.
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1457476/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1286878] Re: Doesn't scale well on a hidpi display

Hi,

any news on unity-greeter?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-greeter in Ubuntu.
https://bugs.launchpad.net/bugs/1286878

Title:
  Doesn't scale well on a hidpi display

Status in OEM Priority Project:
  New
Status in OEM Priority Project trusty series:
  New
Status in unity-greeter package in Ubuntu:
  Triaged
Status in unity-settings-daemon package in Ubuntu:
  Fix Released

Bug description:
  unity-greeter does not scale on hidpi diplays like the rest of unity
  does in trusty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/oem-priority/+bug/1286878/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1357556] Re: Does not stop/restart service when system sleeps

Please forward the patches to upstream
(http://sourceforge.net/projects/g15tools). Thanks!

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libusb in Ubuntu.
https://bugs.launchpad.net/bugs/1357556

Title:
  Does not stop/restart service when system sleeps

Status in g15daemon package in Ubuntu:
  Confirmed
Status in libg15 package in Ubuntu:
  New
Status in libusb package in Ubuntu:
  New

Bug description:
  Release Info
  # lsb_release -rd
  Description:  Ubuntu 14.04.1 LTS
  Release:  14.04

  Package Info
  # dpkg -l | grep g15daemon
  ii  g15daemon 1.9.5.3-8.2ubuntu3  
amd64Screen multiplexer for Logitech 
G15 Keyboard

  Issue
  G15 Keyboard daemon loses connectivity to the g15daemon after the system 
resumes from sleeping

  Resolution:
  Adding a /etc/pm/sleep.d rule such as
  https://gist.github.com/rriemann/2947810
  seems to fix the issue

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/g15daemon/+bug/1357556/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460028] [NEW] Ubuntu suspend instead of shutdown when battery is low

2015-05-29 Thread Michał Fułat

Public bug reported:

Hi!

This bug appears for me in last stable version of Ubuntu (15.04).

In system settings, I set power manager to shutdown my laptop when
battery is critically low.

But it doesn't work.

When battery reach 0%, Ubuntu shows a notify like your computer will
shutdown now but it doesn't. It always went to suspend mode (blinkin'
power led in my laptop).

Moreover, in system power settings I cannot set the action to suspend,
cause I've got only two options: shutdown (which is set by me) and
hibernate (which cannot be set cause it's inactive, probably cause my
swap partition are too small).

My laptop: ASUS K50IN.

Thanks for help.

** Affects: gnome-power-manager (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: asus battery laptop power-manager shutdown suspend

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-power-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1460028

Title:
  Ubuntu suspend instead of shutdown when battery is low

Status in gnome-power-manager package in Ubuntu:
  New

Bug description:
  Hi!

  This bug appears for me in last stable version of Ubuntu (15.04).

  In system settings, I set power manager to shutdown my laptop when
  battery is critically low.

  But it doesn't work.

  When battery reach 0%, Ubuntu shows a notify like your computer will
  shutdown now but it doesn't. It always went to suspend mode (blinkin'
  power led in my laptop).

  Moreover, in system power settings I cannot set the action to
  suspend, cause I've got only two options: shutdown (which is set by
  me) and hibernate (which cannot be set cause it's inactive, probably
  cause my swap partition are too small).

  My laptop: ASUS K50IN.

  Thanks for help.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-power-manager/+bug/1460028/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1449892] Re: yuv to rgb translation is faulty for Intel Generation 8 Graphics

** Also affects: xserver-xorg-video-intel (Ubuntu Vivid)
   Importance: Undecided
   Status: New

** Patch added: xserver-xorg-video-intel_2.99.917-1~exp1ubuntu2.2.debdiff
   
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1449892/+attachment/4406616/+files/xserver-xorg-video-intel_2.99.917-1%7Eexp1ubuntu2.2.debdiff

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1449892

Title:
  yuv to rgb translation is faulty for Intel Generation 8 Graphics

Status in X.org xf86-video-intel:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Confirmed
Status in xserver-xorg-video-intel source package in Vivid:
  New
Status in xserver-xorg-video-intel package in Debian:
  Confirmed

Bug description:
  running mplayer or vlc the video output  is incorrect.  There are are 2 line 
steps on edges. 
  The problems is known and there is already an upstream fix available.
  http://www.spinics.net/lists/intel-gfx/msg65030.html

  I have rebuild the driver with git from 2015-04-28, and the video
  output is correct now.

  The bugfix is for Generation 8 Intel graphics like Intel NUC with Core 
I5-5250 and HD6000 grahics in my case.
  The used version is Ubuntu vivid amd64.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1449892/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1449892] Re: yuv to rgb translation is faulty for Intel Generation 8 Graphics

** Changed in: xserver-xorg-video-intel (Ubuntu Vivid)
   Status: New = In Progress

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1449892

Title:
  yuv to rgb translation is faulty for Intel Generation 8 Graphics

Status in X.org xf86-video-intel:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Confirmed
Status in xserver-xorg-video-intel source package in Vivid:
  In Progress
Status in xserver-xorg-video-intel package in Debian:
  Confirmed

Bug description:
  running mplayer or vlc the video output  is incorrect.  There are are 2 line 
steps on edges. 
  The problems is known and there is already an upstream fix available.
  http://www.spinics.net/lists/intel-gfx/msg65030.html

  I have rebuild the driver with git from 2015-04-28, and the video
  output is correct now.

  The bugfix is for Generation 8 Intel graphics like Intel NUC with Core 
I5-5250 and HD6000 grahics in my case.
  The used version is Ubuntu vivid amd64.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1449892/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1455874] Re: Xorg freeze

2015-05-29 Thread Rudolf Göldner

Christopher M. Penalver,
BIOS is updated.  But, concerning my installation of kubuntu 15.04, there is no 
change. 

The output of dmidecode
RLH8710H.86A.0327.2014.0924.1645
09/24/2014


** Changed in: xorg (Ubuntu)
   Status: Incomplete = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1455874

Title:
  Xorg freeze

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  Installation of 15.04 in addition to 14.10 ok.
  Start by BIOS start menue ok.
  All worked fine.

  Then I wanted to add some lines to the fstab to mount ntfs partitions. I 
copied these lines from the kubuntu 14.10 fstab.
  Since then, kde shows the animated splash screen when loading and then a 
black screen with no more action possible.
  Only Control+Alt+F1 works and shows the tty screen.

  I deleted the additional lines in the fstab, but there is no change in
  behaviour.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3
  Uname: Linux 3.19.0-16-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  Date: Sun May 17 10:58:05 2015
  InstallationDate: Installed on 2015-05-15 (1 days ago)
  InstallationMedia: Kubuntu 15.04 Vivid Vervet - Release amd64 (20150422)
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: xorg
  Symptom: display
  Title: Xorg freeze
  UpgradeStatus: No upgrade log present (probably fresh install)
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CasperVersion: 1.345
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   NVIDIA Corporation GK104 [GeForce GTX 760] [10de:1187] (rev a1) (prog-if 00 
[VGA controller])
 Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:2847]
  LiveMediaBuild: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper 
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.16.0-23.31-generic 3.16.4
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-23-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/22/2014
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: RLH8710H.86A.0324.2014.0122.1611
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: DH87RL
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAG74240-403
  dmi.chassis.type: 3
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrRLH8710H.86A.0324.2014.0122.1611:bd01/22/2014:svn:pn:pvr:rvnIntelCorporation:rnDH87RL:rvrAAG74240-403:cvn:ct3:cvr:
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Wed May 27 13:03:13 2015
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputLogitech Unifying Device. Wireless PID:101a MOUSE, id 8
   inputLogitech Logitech USB Keyboard KEYBOARD, id 9
  xserver.errors:
   Failed to load module nvidia (module does not exist, 0)
   Failed to load module nvidia (module does not exist, 0)
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1
  xserver.video_driver: nouveau

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1455874/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1459613] Re: connecting 2x 4k screens on a Dell XPS12 (9Q33): compiz crashed with SIGSEGV in GLTexture::matrix()

2015-05-29 Thread Christopher M. Penalver

D, when using Metacity, it is assumed one would use GNOME Flashback
(Metacity), not Unity.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to compiz in Ubuntu.
https://bugs.launchpad.net/bugs/1459613

Title:
  connecting 2x 4k screens on a Dell XPS12 (9Q33): compiz crashed with
  SIGSEGV in GLTexture::matrix()

Status in Compiz:
  New
Status in compiz package in Ubuntu:
  Triaged

Bug description:
  this is a new bug report following #1455598

  The relevant details i think are;
  - I own a Dell XPS12 (9Q33) and recently i have had 2 external monitors 
hooked to that through the (mini) display ports. The Screens are from the type 
Dell P2815Q. The screens have the ability to use Daisy chain 
(MST=https://en.wikipedia.org/wiki/DisplayPort#Multiple_displays_on_single_DisplayPort_connector),
 but it fails if i connect my laptop with 2x 4k external monitors. If i try it, 
it shows me some quick lines of text and returnes me to the login screen. If i 
turn _off_ the secondairy screen, it does login with 1 external monitor at 4k. 
If i setup the resolution to 2x 2,5k on the external monitors, it does work. 
Both at the office (where there are as well 2 Dell monitors with 2,5k 
resolution (2500xsomething) but from a different type). I think the problem is 
with the 4k resolutions. The setup does work on Windows 8.1 Pro, so i can use 
my main screen at 1920x1080 as 2x 4k external screens (although its on 30Hz, 
but thats due to the display port 1.2 specification i think). I ha
 ven't tried to connect the laptop with the main screen disabled/closed, so im 
gonna try that soon. But even if that works, i still think it's a bug as it 
seems to work on Windows.
  - - I've updates the bios to A08, 03/03/2015 (the output from dmidecode), but 
if i connect the laptop (with the laptopscreen enabled) to the 2x 4k screens, 
it just logs me out.
  - I've found that if i disable the laptopscreen and try to use 2x 4k, it 
works!. Everything is really small though.. ;-)
  - also, i found out that working with the 2x 4k screens (and the 
laptop-builtin-screen disabled), it goes into slumber or powerdown mode. If it 
does, i can't succesfully get it out and have to restart the machine. I'm gonna 
test some more on that, but it might be related to switching back to 3 screens 
afer coming out of slumber.

  ProblemType: Crash
  DistroRelease: Ubuntu 15.04
  Package: compiz-core 1:0.9.12.1+15.04.20150410.1-0ubuntu1
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Thu May 28 12:06:20 2015
  DistUpgraded: 2015-04-23 21:52:13,436 DEBUG enabling apt cron job
  DistroCodename: vivid
  DistroVariant: ubuntu
  ExecutablePath: /usr/bin/compiz
  ExecutableTimestamp: 1428704498
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Dell Device [1028:05e3]
  InstallationDate: Installed on 2015-03-04 (84 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Dell Inc. XPS 12-9Q33
  ProcCmdline: compiz
  ProcCwd: /home/fr3lld
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic 
root=UUID=8896779c-8f4d-4b4d-baae-5dd647d2572f ro quiet splash nomdmonddf 
nomdmonisw nomdmonddf nomdmonisw vt.handoff=7
  SegvAnalysis:
   Segfault happened at: 0x7f6c3e7b8c50 _ZNK9GLTexture6matrixEv:  mov
0x28(%rdi),%rax
   PC (0x7f6c3e7b8c50) ok
   source 0x28(%rdi) (0x0028) not located in a known VMA region (needed 
readable region)!
   destination %rax ok
  SegvReason: reading NULL VMA
  Signal: 11
  SourcePackage: compiz
  StacktraceTop:
   GLTexture::matrix() const () from 
/usr/lib/x86_64-linux-gnu/compiz/libopengl.so
   GLScreen::glPaintCompositedOutput(CompRegion const, GLFramebufferObject*, 
unsigned int) () from /usr/lib/x86_64-linux-gnu/compiz/libopengl.so
   PrivateGLScreen::paintOutputs(std::listCompOutput*, 
std::allocatorCompOutput* , unsigned int, CompRegion const) () from 
/usr/lib/x86_64-linux-gnu/compiz/libopengl.so
   CompositeScreen::paint(std::listCompOutput*, std::allocatorCompOutput* 
, unsigned int) () from /usr/lib/x86_64-linux-gnu/compiz/libcomposite.so
   CompositeScreen::handlePaintTimeout() () from 
/usr/lib/x86_64-linux-gnu/compiz/libcomposite.so
  Title: compiz crashed with SIGSEGV in GLTexture::matrix()
  UpgradeStatus: Upgraded to vivid on 2015-04-23 (34 days ago)
  UserGroups: adm cdrom dialout dip libvirtd lpadmin plugdev sambashare sudo
  dmi.bios.date: 03/03/2015
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A08

[Desktop-packages] [Bug 1097732] Re: Green screen with color depth of 16 bits

2015-05-29 Thread GG

I'm using the openchrome driver and I'm seeing the green screen. I'm
installing linux on this old desktop for a family member. I'm thinking about
telling him to purchase a video card.
X.Org X server -- VIA display driver
1:0.3.3-1+b2: amd64 i386

--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-openchrome in
Ubuntu.
https://bugs.launchpad.net/bugs/1097732

Title:
Green screen with color depth of 16 bits

Status in xserver-xorg-video-openchrome package in Ubuntu:
Confirmed

Bug description:
I have run into a problem with the openchrome driver, when used with
color depth of 16 bits. With the default depth of 24 bits everything
works ok, but with color depth of 16 bits the screen is mostly green.

The driver seems to be otherwise useable. It is possible to correct
the color problem somewhat with xgamma, but this does not really help
the broken appearance. However, the hardware cursor appears to have
the right colour.

I have tried various Xorg settings relating to EXA and such, but can
not find a combination that would make a change for the better.
Switching to a software cursor changes cursor color to a greener tint.

My main motivation to get this to work is that there are some thin
client hardware that should be very much useable with LTSP, and there
is a remarkable speed difference when colour depths of 16 and 24 are
used (16 being of course faster).

Here is the lspci output for one machine in question:

--
00:00.0 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge (rev 10)
00:00.1 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 IDE interface: VIA Technologies, Inc. VX800 Serial ATA and EIDE
Controller
00:10.0 USB controller: VIA Technologies, Inc. VT82x UHCI USB 1.1
Controller (rev 90)
00:10.1 USB controller: VIA Technologies, Inc. VT82x UHCI USB 1.1
Controller (rev 90)
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. CX700/VX700 Internal Module Bus
00:13.0 PCI bridge: VIA Technologies, Inc. CX700/VX700 Host Bridge
01:00.0 VGA compatible controller: VIA Technologies, Inc. CX700/VX700 [S3
UniChrome Pro] (rev 03)
02:01.0 Audio device: VIA Technologies, Inc. VT8237A/VT8251 HDA Controller
(rev 10)
--

On Lucid (10.04) and Precise (12.04) this machine/configuration works
properly. I can only reproduce the problem in Quantal (12.10).

$ lsb_release -rd
Description: Ubuntu 12.10
Release: 12.10

$ apt-cache policy xserver-xorg-video-openchrome
xserver-xorg-video-openchrome:
Installed: 1:0.3.1-0ubuntu1
Candidate: 1:0.3.1-0ubuntu1
Version table:
*** 1:0.3.1-0ubuntu1 0
100 /var/lib/dpkg/status

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-openchrome/+bug/1097732/+subscriptions

--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1389732] Re: The computer freeze randomly

2015-05-29 Thread Marco Ciampa

I re-read my message, sorry for being rude.

So your suggestion is to leave this bug report to the (missing?)
willingness of his author and continue with my report?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1389732

Title:
  The computer freeze randomly

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  The freeze problem actually started when I was using 12.04 LTS.  Every
  time when I was login to the desktop (after the computer is completely
  shut down) , the screen glitches and freezes.  However, when I restart
  the computer, the problem went away. Everything is normal again. This
  happened in every desktop environment that I have used (Gnome, Unity,
  Xfce).

  The problem getting worst after few days where I need to restart the
  computer twice (sometime 3 times) in order to make the system calm
  down.

  So, I think it was the driver problem, and I changed the VGA driver to
  its propriety Nvidia driver, but no avail. In fact, it getting worst.

  Then, I thought maybe the system not stable, so I upgrade the system
  to 14.04. But the problem still persist. Again, I installed the Nvdia
  driver again, it seem to work but eventually it also no avail. The
  problem seem more serious under Nvdia driver.

  And I revert back to the opensource driver. It works, but only in xfce
  environment.  It also freeze if I using other environment. It's okay
  for me to use xfce, but the thing is when I try to play the Nibbles
  (which I think it is preinstalled in 14.04), not long I played, it
  freeze again.

  I also thought this might be the hardware problem, maybe it is the
  onboard vga card got something wrong with it. After All, I have been
  using this computer for 5 years. But, when i using Window 7 (using
  dual boot), it's never be the problem. Everything is working fine in
  Window 7. So, the hardware issue, ruled out.

  Hope you can help.

  Thanks

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8
  Uname: Linux 3.13.0-39-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  Date: Wed Nov  5 22:43:33 2014
  DistUpgraded: 2014-11-05 02:41:27,689 DEBUG enabling apt cron job
  DistroCodename: trusty
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.3.10, 3.13.0-39-generic, x86_64: installed
   virtualbox, 4.3.10, 3.5.0-54-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] [10de:03d6] (rev a2) 
(prog-if 00 [VGA controller])
 Subsystem: ASUSTeK Computer Inc. Device [1043:83a4]
  InstallationDate: Installed on 2013-03-23 (592 days ago)
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release amd64 
(20130213)
  Lsusb:
   Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 
Wireless Adapter
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 003: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical 
Mouse
   Bus 002 Device 002: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet 
K-2024 Multimedia Keyboard
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: System manufacturer System Product Name
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic 
root=UUID=9faca4c5-9082-45a6-aa69-00dec6f3c30b ro plymouth:debug drm.debug=0xe 
no=1
  SourcePackage: xorg
  UpgradeStatus: Upgraded to trusty on 2014-11-04 (0 days ago)
  dmi.bios.date: 04/08/2009
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 0701
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: M2N68-AM Plus
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev X.0x
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr0701:bd04/08/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM2N68-AMPlus:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer
  version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.52-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.1
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati:

[Desktop-packages] [Bug 1414707] Re: Login fails, returns to login and flickering prevents password typing

2015-05-29 Thread Joel

This issue still persists in Ubuntu Gnome 14.04.2

I could consistently reproduce by installing fresh and then installing
steam (and its dependencies). I was not able to restart gdm and login as
it just froze in tty7 (the other terminals worked). When doing a hard
reset of my computer it would then hang at the grey screen with the
gnome logo and the three loading dots .

Installing Ubuntu Gnome 15.04 to hopefully resolve this issue

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/1414707

Title:
  Login fails, returns to login and flickering prevents password typing

Status in Ubuntu GNOME:
  Fix Released
Status in gdm package in Ubuntu:
  Fix Released

Bug description:
  I was testing Ubuntu Gnome 15.04 in VirtualBox. I was able to login
  into the machine a few times and run updates and install a few
  programs. I also installed the VirtualBox guest additions. Since today
  this happens:

  I log into the machine. The login is accepted and the machine does
  something for a few seconds. Then the machine jumps back to login, but
  with a random flickering. The flickering also resets the password
  field, which prevents it from being typed.

  So I can't login into the machine anymore.

  I am using a HP Probook 6570 b which I upgraded to 16 GB of RAM. The
  iso was from the 20th of January, but I did a daily sudo apt-get
  upgrade on it.

  Video: https://www.youtube.com/watch?v=7Xpt39AKVuEfeature=youtu.be
  --- 
  ApportVersion: 2.15.1-0ubuntu2
  Architecture: amd64
  DistroRelease: Ubuntu 15.04
  InstallationDate: Installed on 2015-01-22 (5 days ago)
  InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Alpha amd64 (20141218)
  Package: gdm 3.14.1-0ubuntu1
  PackageArchitecture: amd64
  ProcEnviron:
   LANGUAGE=de_AT:de
   TERM=xterm
   PATH=(custom, no user)
   LANG=de_AT.UTF-8
   SHELL=/bin/bash
  ProcVersionSignature: Ubuntu 3.18.0-9.10-generic 3.18.2
  Tags:  vivid
  Uname: Linux 3.18.0-9-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-gnome/+bug/1414707/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1389732] Re: The computer freeze randomly

2015-05-29 Thread Marco Ciampa

Sorry I missed this:
https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette
...Instead, if you are the original reporter, ensuring the report has
all the requested testing information performed would be the fastest way
to ensure your bug is resolved as soon as possible. If you are not the
original reporter, it's best to file a new report, so that necessary
debugging attachments are reviewed. It is a common misconception that
filing a potential duplicate report is wasteful. Filing a new report is
quite helpful, and is preferred to ease triaging. Thanks for your
patience...

--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1389732

Title:
The computer freeze randomly

Status in xorg package in Ubuntu:
Incomplete

Bug description:
The freeze problem actually started when I was using 12.04 LTS. Every
time when I was login to the desktop (after the computer is completely
shut down) , the screen glitches and freezes. However, when I restart
the computer, the problem went away. Everything is normal again. This
happened in every desktop environment that I have used (Gnome, Unity,
Xfce).

The problem getting worst after few days where I need to restart the
computer twice (sometime 3 times) in order to make the system calm
down.

So, I think it was the driver problem, and I changed the VGA driver to
its propriety Nvidia driver, but no avail. In fact, it getting worst.

Then, I thought maybe the system not stable, so I upgrade the system
to 14.04. But the problem still persist. Again, I installed the Nvdia
driver again, it seem to work but eventually it also no avail. The
problem seem more serious under Nvdia driver.

And I revert back to the opensource driver. It works, but only in xfce
environment. It also freeze if I using other environment. It's okay
for me to use xfce, but the thing is when I try to play the Nibbles
(which I think it is preinstalled in 14.04), not long I played, it
freeze again.

I also thought this might be the hardware problem, maybe it is the
onboard vga card got something wrong with it. After All, I have been
using this computer for 5 years. But, when i using Window 7 (using
dual boot), it's never be the problem. Everything is working fine in
Window 7. So, the hardware issue, ruled out.

Hope you can help.

Thanks

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: xorg 1:7.7+1ubuntu8
ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8
Uname: Linux 3.13.0-39-generic x86_64
.tmp.unity.support.test.0:

ApportVersion: 2.14.1-0ubuntu3.5
Architecture: amd64
CompizPlugins: No value set for
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: None
Date: Wed Nov 5 22:43:33 2014
DistUpgraded: 2014-11-05 02:41:27,689 DEBUG enabling apt cron job
DistroCodename: trusty
DistroVariant: ubuntu
DkmsStatus:
virtualbox, 4.3.10, 3.13.0-39-generic, x86_64: installed
virtualbox, 4.3.10, 3.5.0-54-generic, x86_64: installed
ExtraDebuggingInterest: Yes
GraphicsCard:
NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] [10de:03d6] (rev a2)
(prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:83a4]
InstallationDate: Installed on 2013-03-23 (592 days ago)
InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release amd64
(20130213)
Lsusb:
Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573
Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical
Mouse
Bus 002 Device 002: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet
K-2024 Multimedia Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: System manufacturer System Product Name
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic
root=UUID=9faca4c5-9082-45a6-aa69-00dec6f3c30b ro plymouth:debug drm.debug=0xe
no=1
SourcePackage: xorg
UpgradeStatus: Upgraded to trusty on 2014-11-04 (0 days ago)
dmi.bios.date: 04/08/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 0701
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: M2N68-AM Plus
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev X.0x
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr0701:bd04/08/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM2N68-AMPlus:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer
version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1

[Desktop-packages] [Bug 1174678] Re: Full screen zoom fails in Mousepad and Leafpad text editors

2015-05-29 Thread Thaddaeus Tintenfisch

I will update the bug status to reflect the new bug description. Thanks.

** Package changed: leafpad (Ubuntu) = unity (Ubuntu)

** Package changed: mousepad (Ubuntu) = chromium-browser (Ubuntu)

** Changed in: unity (Ubuntu)
   Status: Incomplete = New

** Changed in: chromium-browser (Ubuntu)
   Status: Incomplete = New

** Summary changed:

- Full screen zoom fails in Mousepad and Leafpad text editors
+ Full screen zoom fails in Chromium

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity in Ubuntu.
Matching subscriptions: dp-unity
https://bugs.launchpad.net/bugs/1174678

Title:
  Full screen zoom fails in Chromium

Status in chromium-browser package in Ubuntu:
  New
Status in unity package in Ubuntu:
  New

Bug description:
  I'm not sure if this is a Unity issue or an editor issue, but the same
  problem on 2 different editors would suggest the former. Open either
  of these editors. Double-click on the title bar to zoom. (Once you do
  this, you may never again be able to shrink the window again, beyond a
  small fractional amount, because you will never again be able to reach
  the bottom border with the up-and-down resize arrow; you would need
  to reinstall the OS!)

  Zoom works fine. Now close the editor.

  Launch it again. This time, it tries to come up zoomed, which makes
  sense because that was its most recent state. But the last line of
  text at the bottom of the screen shows through. (In other words, it
  would be a full-screen zoom, but the last line is still the desktop
  background.) So you need to double-click on the title bar twice, once
  to shrink and another time to zoom again. The second time, it actually
  zooms correctly. When you open another file or repeat the experiment,
  you need to quadruple-click all over again.

  In addition to being very awkward, this is actually quite confusing,
  because if you have zoomed and unzoomed editor windows open, the last
  line of text from document A shows up at the bottom of document B.

  This problem did not happen on i386 12.04 several months ago. Sorry, I
  no longer have the specific details. Anyway, it happens now on AMD64
  12.04. Reinstalling the OS fixed it for a few sessions. Then it
  happened again. Perhaps zooming triggers it.

  I have some sense that this bug relates to the fact that Unity has its
  own title bar at the top, so somehow the editor is getting the wrong
  idea about how big full-screen really is.

  The reinstall-the-OS-to-resize issue is perhaps another bug, but I'm
  not going to open another report at the moment because I suspect that
  it's due to the same root cause.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: mousepad 0.2.16-5ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-27.46~precise1-generic 3.5.7.7
  Uname: Linux 3.5.0-27-generic x86_64
  ApportVersion: 2.0.1-0ubuntu17.2
  Architecture: amd64
  Date: Tue Apr 30 16:21:11 2013
  EcryptfsInUse: Yes
  ExecutablePath: /usr/bin/mousepad
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release amd64 
(20130213)
  MarkForUpload: True
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: mousepad
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1174678/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1449051] Re: Upower doesn't handle bluetooth mice properly

2015-05-29 Thread Bug Watch Updater

** Changed in: upower (Debian)
   Status: Unknown = New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to upower in Ubuntu.
https://bugs.launchpad.net/bugs/1449051

Title:
  Upower doesn't handle bluetooth mice properly

Status in Upower:
  Fix Released
Status in upower package in Ubuntu:
  Fix Committed
Status in upower package in Debian:
  New

Bug description:
  I have a bluetooth Logitech M557, and it is being mis-detected by
  Upower as a battery instead of a mouse:

  Device: /org/freedesktop/UPower/devices/battery_hid_00o1fo20of5oabob5_battery
native-path:  hid-00:1f:20:f5:ab:b5-battery
model:Bluetooth Mouse M557
power supply: no
updated:  Mon 27 Apr 2015 10:05:22 AM EDT (13 seconds ago)
has history:  yes
has statistics:   yes
battery
  present: yes
  rechargeable:yes
  state:   discharging
  warning-level:   none
  energy:  0 Wh
  energy-empty:0 Wh
  energy-full: 0 Wh
  energy-full-design:  0 Wh
  energy-rate: 0 W
  percentage:  100%
  capacity:100%
  icon-name:  'battery-full-symbolic'
History (charge):
  1430143522100.000 discharging

  
  The patch available in the upstream bug improves the situation by parsing it 
as a hid device, but then mistakes it for a keyboard:
  https://bugs.freedesktop.org/show_bug.cgi?id=86510

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: upower 0.99.2-2
  ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
  Uname: Linux 3.19.0-15-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Apr 27 10:04:20 2015
  InstallationDate: Installed on 2013-11-26 (516 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 
(20131016.1)
  SourcePackage: upower
  UpgradeStatus: Upgraded to vivid on 2015-03-07 (50 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/upower/+bug/1449051/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1449051] Re: Upower doesn't handle bluetooth mice properly

2015-05-29 Thread redfox7691

I have a bluetooth mouse, an HP Touch to Pair Mouse and it is
identified by Upower as a laptop battery instead of a mouse, I use
Ubuntu 15.04. How can I get fixed version of upower?

** Attachment added: out.txt
   
https://bugs.launchpad.net/ubuntu/+source/upower/+bug/1449051/+attachment/4406526/+files/out.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to upower in Ubuntu.
https://bugs.launchpad.net/bugs/1449051

Title:
  Upower doesn't handle bluetooth mice properly

Status in Upower:
  Fix Released
Status in upower package in Ubuntu:
  Fix Committed
Status in upower package in Debian:
  New

Bug description:
  I have a bluetooth Logitech M557, and it is being mis-detected by
  Upower as a battery instead of a mouse:

  Device: /org/freedesktop/UPower/devices/battery_hid_00o1fo20of5oabob5_battery
native-path:  hid-00:1f:20:f5:ab:b5-battery
model:Bluetooth Mouse M557
power supply: no
updated:  Mon 27 Apr 2015 10:05:22 AM EDT (13 seconds ago)
has history:  yes
has statistics:   yes
battery
  present: yes
  rechargeable:yes
  state:   discharging
  warning-level:   none
  energy:  0 Wh
  energy-empty:0 Wh
  energy-full: 0 Wh
  energy-full-design:  0 Wh
  energy-rate: 0 W
  percentage:  100%
  capacity:100%
  icon-name:  'battery-full-symbolic'
History (charge):
  1430143522100.000 discharging

  
  The patch available in the upstream bug improves the situation by parsing it 
as a hid device, but then mistakes it for a keyboard:
  https://bugs.freedesktop.org/show_bug.cgi?id=86510

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: upower 0.99.2-2
  ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
  Uname: Linux 3.19.0-15-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Apr 27 10:04:20 2015
  InstallationDate: Installed on 2013-11-26 (516 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 
(20131016.1)
  SourcePackage: upower
  UpgradeStatus: Upgraded to vivid on 2015-03-07 (50 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/upower/+bug/1449051/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1370376] Re: Can't receive MMS despite ability to send on Tele2

2015-05-29 Thread Alfonso Sanchez-Beato

Probably the same as bug #1459995

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1370376

Title:
  Can't receive MMS despite ability to send on Tele2

Status in network-manager package in Ubuntu:
  Confirmed
Status in nuntium package in Ubuntu:
  Confirmed

Bug description:
  I can send MMS (and they actually come through to the recipient), but
  I can't receive MMS. I am not sure if this is an APN settings issue,
  but I would have thought it either worked both ways or not at all.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1370376/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1456184] Re: NVidia VGA freeze with new kernels

2015-05-29 Thread Marco Ciampa

I know that the BIOS is updated to last version available: 1804.

I actually am writing from my laptop and that is a desktop PC.

As soon as I reach that PC I'll do what I was asked to do and I will
post the results...

Thanks for your patience.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1456184

Title:
  NVidia VGA freeze with new kernels

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 
630a] (rev a2)
  Freeze when used with new kernels (3.13 or 3.16) and works with 3.2.0 (from 
12.04 precise) or 3.13 (trusty) with nomodesed option (but wrong resolution)

  lsb_release -rd
  Description:  Ubuntu 14.04.2 LTS
  Release:  14.04

  apt-cache policy xorg
  xorg:
Installato: 1:7.7+1ubuntu8.1
Candidato:  1:7.7+1ubuntu8.1
Tabella versione:
   *** 1:7.7+1ubuntu8.1 0
  500 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   1:7.7+1ubuntu8 0
  500 http://de.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  ProcVersionSignature: Ubuntu 3.13.0-52.86-generic 3.13.11-ckt18
  Uname: Linux 3.13.0-52-generic x86_64
  .tmp.unity.support.test.1:
   
  ApportVersion: 2.14.1-0ubuntu3.10
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Mon May 18 14:29:23 2015
  DistUpgraded: 2015-05-12 07:07:16,098 DEBUG enabling apt cron job
  DistroCodename: trusty
  DistroVariant: ubuntu
  DkmsStatus:
   vboxhost, 4.3.28, 3.13.0-52-generic, x86_64: installed
   vboxhost, 4.3.28, 3.2.0-83-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] [10de:03d6] (rev a2) 
(prog-if 00 [VGA controller])
 Subsystem: ASUSTeK Computer Inc. Device [1043:83a4]
  InstallationDate: Installed on 2010-07-30 (1752 days ago)
  InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429)
  Lsusb:
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: System manufacturer System Product Name
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-52-generic 
root=UUID=000bc455-e879-4d2d-a416-659e9668f49a ro nomodeset nomdmonddf 
nomdmonisw vt.handoff=7
  Renderer: Software
  SourcePackage: xorg
  UpgradeStatus: Upgraded to trusty on 2015-05-12 (6 days ago)
  dmi.bios.date: 08/23/2010
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1804
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: M2N68-AM Plus
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev X.0x
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1804:bd08/23/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM2N68-AMPlus:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer
  version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.4
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.4
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.6
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Mon May 18 14:24:41 2015
  xserver.configfile: /etc/X11/xorg.conf
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputAT Translated Set 2 keyboard KEYBOARD, id 8
   inputImPS/2 Generic Wheel Mouse MOUSE, id 9
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   
  xserver.version: 2:1.15.1-0ubuntu2.7

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1456184/+subscriptions

-- 
Mailing list:

[Desktop-packages] [Bug 1448834] Re: mouse battery not shown after upgrade

2015-05-29 Thread Bug Watch Updater

** Changed in: upower (Debian)
   Status: Unknown = New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to upower in Ubuntu.
https://bugs.launchpad.net/bugs/1448834

Title:
  mouse battery not shown after upgrade

Status in upower package in Ubuntu:
  Fix Committed
Status in upower package in Debian:
  New

Bug description:
  In Xubuntu 14.04 and 14.10 the power manager dropdown menu showed the
  battery level in my wireless logitech mouse.  However after upgrading
  to 15.04 the mouse battery status is not shown.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: xfce4-power-manager 1.4.3-0ubuntu1
  ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
  Uname: Linux 3.19.0-15-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Sun Apr 26 19:49:19 2015
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: xfce4-power-manager
  UpgradeStatus: Upgraded to vivid on 2015-04-23 (3 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/upower/+bug/1448834/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1454852] Re: Crash at boot

There is no patch attached here, I assume it got removed? And this very
much does sound like the upower patch referenced from above. I'm
unsubscribing sponsors, and tentatively close this. If this is still an
issue in vivid, or you have a backported patch to sponsor etc., please
reopen/re-subscribe. Thanks!

** Changed in: libimobiledevice (Ubuntu)
   Status: New = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libimobiledevice in Ubuntu.
https://bugs.launchpad.net/bugs/1454852

Title:
  Crash at boot

Status in libimobiledevice package in Ubuntu:
  Fix Released

Bug description:
  When I have my iPod 5G connected to my computer via USB 3 ports (not
  sure if that matters) upowerd crashes, viewing the stacktrace it
  pointed to libimobiledevice.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libimobiledevice/+bug/1454852/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460047] Re: evolution does not send emails with attachement files

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: evolution (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evolution in Ubuntu.
https://bugs.launchpad.net/bugs/1460047

Title:
  evolution does not send emails with attachement files

Status in evolution package in Ubuntu:
  Confirmed

Bug description:
  Hello

  since some days (tuesday, at least), each mail sent with evolution and
  containing an attachment file in PDF format is not really sent. It is
  saved into my SENT box but it is not really sent (no recipient
  receives the message).

  I do some tests with different file formats and the problem seems to
  appear only with PDF files (new or old files). The size of the files
  seems to play no role in the problem.

  My config:
  - ubuntu 15.04 64 bits
  - evolution 3.12.11
  - gnome

  Thanks for your help.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1460047/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460047] Re: evolution does not send emails with attachement files

2015-05-29 Thread thatguruguy

This seems to be a bug in evolution 3.12.11. Is there any chance of a
backport of a newer version? It appears that 3.16 solves the problem.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evolution in Ubuntu.
https://bugs.launchpad.net/bugs/1460047

Title:
  evolution does not send emails with attachement files

Status in evolution package in Ubuntu:
  Confirmed

Bug description:
  Hello

  since some days (tuesday, at least), each mail sent with evolution and
  containing an attachment file in PDF format is not really sent. It is
  saved into my SENT box but it is not really sent (no recipient
  receives the message).

  I do some tests with different file formats and the problem seems to
  appear only with PDF files (new or old files). The size of the files
  seems to play no role in the problem.

  My config:
  - ubuntu 15.04 64 bits
  - evolution 3.12.11
  - gnome

  Thanks for your help.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1460047/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460047] [NEW] evolution does not send emails with attachement files

2015-05-29 Thread Lagasquie

Public bug reported:

Hello

since some days (tuesday, at least), each mail sent with evolution and
containing an attachment file in PDF format is not really sent. It is
saved into my SENT box but it is not really sent (no recipient receives
the message).

I do some tests with different file formats and the problem seems to
appear only with PDF files (new or old files). The size of the files
seems to play no role in the problem.

My config:
- ubuntu 15.04 64 bits
- evolution 3.12.11
- gnome

Thanks for your help.

** Affects: evolution (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evolution in Ubuntu.
https://bugs.launchpad.net/bugs/1460047

Title:
  evolution does not send emails with attachement files

Status in evolution package in Ubuntu:
  New

Bug description:
  Hello

  since some days (tuesday, at least), each mail sent with evolution and
  containing an attachment file in PDF format is not really sent. It is
  saved into my SENT box but it is not really sent (no recipient
  receives the message).

  I do some tests with different file formats and the problem seems to
  appear only with PDF files (new or old files). The size of the files
  seems to play no role in the problem.

  My config:
  - ubuntu 15.04 64 bits
  - evolution 3.12.11
  - gnome

  Thanks for your help.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1460047/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1299290] Re: Window blank on connection, works on resize

2015-05-29 Thread Stefan

Confirmed too, window not blank or black any more.

remmina (1.1.1-1+749+next+201505190046~ubuntu14.04.1)
libfreerdp1 (1.2.0~git2015020)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to remmina in Ubuntu.
https://bugs.launchpad.net/bugs/1299290

Title:
  Window blank on connection, works on resize

Status in remmina package in Ubuntu:
  Confirmed

Bug description:
  When first connecting to a remote host with remmina, with either RDP or VNC, 
the connection window is blank.
  If I resize the window the remote display renders correctly.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: remmina 1.0.0-4ubuntu3
  ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6
  Uname: Linux 3.13.0-17-generic x86_64
  ApportVersion: 2.13.3-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Fri Mar 28 18:08:05 2014
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2014-03-12 (16 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140307)
  SourcePackage: remmina
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/remmina/+bug/1299290/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460048] Re: evince window is not resizeable

2015-05-29 Thread Sebastien Bacher

** Package changed: evince (Ubuntu) = gnome-shell (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evince in Ubuntu.
https://bugs.launchpad.net/bugs/1460048

Title:
  evince window is not resizeable

Status in gnome-shell package in Ubuntu:
  New

Bug description:
  Hello

  since I had installed ubuntu 15.04, the evince window is become not
  resizeable.

  My config :
  - ubuntu 15.04
  - evince 3.14.2
  - gnome

  Thanks for your help.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1460048/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1459922] Re: error with usb

2015-05-29 Thread Phillip Susi

We need at the very least, /var/log/syslog to see what is going on.
Also you really should describe what you were doing instead of just
pasting an error message.


** Changed in: udisks2 (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to udisks2 in Ubuntu.
https://bugs.launchpad.net/bugs/1459922

Title:
  error with usb

Status in udisks2 package in Ubuntu:
  Incomplete

Bug description:
  Error mounting: mount exited with exit code 18: Error opening '/dev/sdc1': 
Read-only file system
  Failed to mount '/dev/sdc1': Read-only file system

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/udisks2/+bug/1459922/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460048] [NEW] evince window is not resizeable

2015-05-29 Thread Lagasquie

Public bug reported:

Hello

since I had installed ubuntu 15.04, the evince window is become not
resizeable.

My config :
- ubuntu 15.04
- evince 3.14.2
- gnome

Thanks for your help.

** Affects: gnome-shell (Ubuntu)
 Importance: Undecided
 Status: New

** Package changed: evolution (Ubuntu) = evince (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evolution in Ubuntu.
https://bugs.launchpad.net/bugs/1460048

Title:
  evince window is not resizeable

Status in gnome-shell package in Ubuntu:
  New

Bug description:
  Hello

  since I had installed ubuntu 15.04, the evince window is become not
  resizeable.

  My config :
  - ubuntu 15.04
  - evince 3.14.2
  - gnome

  Thanks for your help.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1460048/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460062] [NEW] Scrollback with Shift-PageUp Shift-PageDown does not refresh screen

2015-05-29 Thread David Kastrup

Public bug reported:

I am often using Scrollback in GNOME-Terminal.  The current version
forgets to refresh the screen timely afterwards.  For one thing, it
means that one is wildly pressing Shift-PageUp Shift-PageDown too often
and it is hard to find things.

For another, when trying to highlight material with the mouse, the
refresh happens after the highlighting completes so the highlighted
material is on a different page than the material you _imagined_ to be
highlighting.

Very annoying.  Basically, you have to remember to do an extra click or
keypress or whatever in order to trigger the screen refresh before you
can do anything serious.

ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: gnome-terminal 3.14.2-0ubuntu3
ProcVersionSignature: Ubuntu 3.16.0-34.47-generic 3.16.7-ckt8
Uname: Linux 3.16.0-34-generic i686
NonfreeKernelModules: nvidia
ApportVersion: 2.17.2-0ubuntu1.1
Architecture: i386
CurrentDesktop: X-Cinnamon
Date: Fri May 29 14:56:07 2015
InstallationDate: Installed on 2011-10-14 (1322 days ago)
InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release i386 (20111011)
SourcePackage: gnome-terminal
UpgradeStatus: Upgraded to vivid on 2015-04-27 (32 days ago)

** Affects: gnome-terminal (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 vivid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/1460062

Title:
  Scrollback with Shift-PageUp Shift-PageDown does not refresh screen

Status in gnome-terminal package in Ubuntu:
  New

Bug description:
  I am often using Scrollback in GNOME-Terminal.  The current version
  forgets to refresh the screen timely afterwards.  For one thing, it
  means that one is wildly pressing Shift-PageUp Shift-PageDown too
  often and it is hard to find things.

  For another, when trying to highlight material with the mouse, the
  refresh happens after the highlighting completes so the highlighted
  material is on a different page than the material you _imagined_ to be
  highlighting.

  Very annoying.  Basically, you have to remember to do an extra click
  or keypress or whatever in order to trigger the screen refresh before
  you can do anything serious.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: gnome-terminal 3.14.2-0ubuntu3
  ProcVersionSignature: Ubuntu 3.16.0-34.47-generic 3.16.7-ckt8
  Uname: Linux 3.16.0-34-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: i386
  CurrentDesktop: X-Cinnamon
  Date: Fri May 29 14:56:07 2015
  InstallationDate: Installed on 2011-10-14 (1322 days ago)
  InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release i386 (20111011)
  SourcePackage: gnome-terminal
  UpgradeStatus: Upgraded to vivid on 2015-04-27 (32 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/1460062/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460067] [NEW] Attaching files to event invitations does not work in Thunderbird extension Lightning

2015-05-29 Thread Karl Kastner

Public bug reported:

Use case: The user wants to attach documents to an event invitation.
Expected behaviour: The user clicks the Attach button, selects files in the 
browser. The files are then transmitted with the invitation when it is send. 
This is the same behaviour as for plain email attachments.
Current behaviour: After the user clicks the Attach button, the full path to 
the document has to be entered in the mask Enter a web page, or document 
location. No browsing is available. Despite entering the path to the document, 
the attachments are not transmitted.
Change request: Please enable the same attachment functionality to event 
invitations that is available for plain mails. If this cannot be implemented 
with reasonable effort, then at least remove or rename the Attach button in the 
event invitation as it is confusing.

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: thunderbird 1:31.6.0+build1-0ubuntu0.14.04.1
ProcVersionSignature: Ubuntu 3.13.0-52.86-generic 3.13.11-ckt18
Uname: Linux 3.13.0-52-generic x86_64
AddonCompatCheckDisabled: False
ApportVersion: 2.14.1-0ubuntu3.10
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC1:  pia3330 F pulseaudio
 /dev/snd/controlC0:  pia3330 F pulseaudio
BuildID: 20150330214959
Channel: Unavailable
CurrentDesktop: GNOME
Date: Fri May 29 15:07:45 2015
Extensions: extensions.sqlite corrupt or missing
ForcedLayersAccel: False
IfupdownConfig:
 # interfaces(5) file used by ifup(8) and ifdown(8)
 auto lo
 iface lo inet loopback
IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini 
or extensions.sqlite)
InstallationDate: Installed on 2015-03-17 (72 days ago)
InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
IpRoute:
 default via 10.75.15.254 dev eth1  proto static 
 10.75.0.0/20 dev eth1  proto kernel  scope link  src 10.75.13.160  metric 1
Locales: extensions.sqlite corrupt or missing
MostRecentCrashID: bp-b335e522-6d32-40f8-948c-cb7c32150321
PrefErrors: 'utf-8' codec can't decode byte 0xe4 in position 849: invalid 
continuation byte
PrefSources:
 
[Profile]/extensions/{e2fda1a4-762b-4020-b5ad-a41df1933103}/defaults/preferences/lightning.js
 
[Profile]/extensions/EditMailSubject@jcp.convenant/defaults/preferences/preferences.js
Profiles: Profile0 (Default) - LastVersion=31.6.0/20150330214959 (In use)
RelatedPackageVersions:
 gnome-shell   3.10.4-0ubuntu5.2
 rhythmbox-mozilla 3.0.2-0ubuntu2
 djview-plugin 4.9-4ubuntu3
 totem-mozilla 3.10.1-1ubuntu4
RunningIncompatibleAddons: False
SourcePackage: thunderbird
SubmittedCrashIDs:
 bp-b335e522-6d32-40f8-948c-cb7c32150321
 bp-6aafced0-baf0-4aeb-bb78-76db42130710
 bp-2f33ee93-ebef-4c78-9820-a5ef02130604
 bp-165d47e2-3d48-48b0-a54c-08d672121202
 bp-14749f5b-fbb0-4861-bb01-e27a72121119
Themes: extensions.sqlite corrupt or missing
UpgradeStatus: No upgrade log present (probably fresh install)
WifiSyslog: May 29 13:47:26 pia-W230SS kernel: [21236.330004] perf samples too 
long (2505  2500), lowering kernel.perf_event_max_sample_rate to 5
dmi.bios.date: 04/15/2014
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 4.6.5
dmi.board.asset.tag: Tag 12345
dmi.board.name: W230SS
dmi.board.vendor: Notebook
dmi.board.version: Not Applicable
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 9
dmi.chassis.vendor: Notebook
dmi.chassis.version: N/A
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd04/15/2014:svnNotebook:pnW230SS:pvrNotApplicable:rvnNotebook:rnW230SS:rvrNotApplicable:cvnNotebook:ct9:cvrN/A:
dmi.product.name: W230SS
dmi.product.version: Not Applicable
dmi.sys.vendor: Notebook

** Affects: thunderbird (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/1460067

Title:
  Attaching files to event invitations does not work in Thunderbird
  extension Lightning

Status in thunderbird package in Ubuntu:
  New

Bug description:
  Use case: The user wants to attach documents to an event invitation.
  Expected behaviour: The user clicks the Attach button, selects files in the 
browser. The files are then transmitted with the invitation when it is send. 
This is the same behaviour as for plain email attachments.
  Current behaviour: After the user clicks the Attach button, the full path to 
the document has to be entered in the mask Enter a web page, or document 
location. No browsing is available. Despite entering the path to the document, 
the attachments are not transmitted.
  Change request: Please enable the same attachment functionality to event 
invitations that is available for plain mails. If this cannot be implemented 
with reasonable effort, then at least remove or rename the Attach button in the 
event invitation as it is confusing.

  ProblemType: Bug

[Desktop-packages] [Bug 1357556] Re: Does not stop/restart service when system sleeps

2015-05-29 Thread Alexander Ponyatykh

Upstream seems to be dead - last release was in 2007, and last commit was in 
2011, but I've posted it anyway.
https://sourceforge.net/p/g15tools/patches/5/

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libusb in Ubuntu.
https://bugs.launchpad.net/bugs/1357556

Title:
  Does not stop/restart service when system sleeps

Status in g15daemon package in Ubuntu:
  Confirmed
Status in libg15 package in Ubuntu:
  New
Status in libusb package in Ubuntu:
  New

Bug description:
  Release Info
  # lsb_release -rd
  Description:  Ubuntu 14.04.1 LTS
  Release:  14.04

  Package Info
  # dpkg -l | grep g15daemon
  ii  g15daemon 1.9.5.3-8.2ubuntu3  
amd64Screen multiplexer for Logitech 
G15 Keyboard

  Issue
  G15 Keyboard daemon loses connectivity to the g15daemon after the system 
resumes from sleeping

  Resolution:
  Adding a /etc/pm/sleep.d rule such as
  https://gist.github.com/rriemann/2947810
  seems to fix the issue

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/g15daemon/+bug/1357556/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460080] [NEW] HP laserjet 1018 no longer works

2015-05-29 Thread Tristram Shorter

Public bug reported:

My first experience of Ubuntu was Utopic Unicorn, about 2 months ago. I 
installed HPLIP, so as to use my HP Laserjet 1018 printer, and it all worked 
fine. On upgrading to Ubuntu 15.04, my printer stopped working. I have tried 
everything I can think of: upgrading HPLIP, removing HPLIP and installing an 
alternative driver (foomatic), deleting and adding the printer, nothing works. 
I have also downloaded and installed all updates to Ubuntu. I have noticed, 
checking through previous bug reports, that this appears to be a recurring 
problem: people's HP printers work OK until, on upgrading Ubuntu, they suddenly 
stopped working. Can it be that beta versions are not being properly tested? 
Having spent most of yesterday on this problem, and having being seriously 
ticked off by my boss, about it, I am unwilling to spend further time on it. I 
was going to include some screens shots to support my case, but I can't see how 
to do this. Here are some more details:
As of now:
listed printers are: Canon ip1900 series
   HP Laserjet 1018 (default) / Enabled -- OK 
/ Shared -- OK
   
Description: Hewlett-Packard HP LaserJet 1018
   
Location: tristram-Aspire-5570Z
   Device 
URI: usb://HP/LaserJet%201018?serial=LF04EKT
   Make and 
Model: HP LaserJet 1018 Foomatic/foo2zjs-z1 (recommended)
   Printer 
state: Idle - Sending data to printer.

Trying to print a test page produces a little box that says: Submitted - Test 
page submitted as job (whatever)
Noticing that, above, the driver appears to be set to Foomatic, I tried 
changing it. Now it reads:
   Make and 
Model: HP LaserJet 1018, hpcups 3.15.4, requires proprietary plugin

I pressed the Print Test Page button, and got:  Submitted - Test page 
submitted as job 64. As usual, nothing happens.
All this time, the printer is turned on, and connected to my laptop via USB 
cable, needless to say. On viewing Document print status I have: Job: 64 /User: 
tristram /Document: Test Page / Printer: Hewlett-Packard-HP-LaserJet-1018 / 
Size: 1k /Time submitted: 11 minutes ago / Status (printer appears with a red 
sign) : Stopped - Printer error
On viewing job attributes, I have (for instance, a screen shot would be really 
useful here):
job-more-info: http://localhost:631/jobs/64 (...)
job-printer-state-message: Filter failed
job-printer-state-reasons: ['hplip.plugin-error'] (...)
job-state-reasons: job-completed-with-errors  (...)

There's more info in this report, but I don't know what you need...

I hope this is enough for you people to work on. Meanwhile, I'm
seriously thinking of downgrading my Ubuntu version to what it was
before, and HPLIP also, except that I don't know for sure what the
working version was

Thank you very much,

Tristram

ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: hplip 3.15.2-0ubuntu4.1
ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
Uname: Linux 3.19.0-18-generic i686
ApportVersion: 2.17.2-0ubuntu1.1
Architecture: i386
CupsErrorLog:
 E [29/May/2015:09:53:50 -0300] [cups-deviced] PID 12270 (hpfax) stopped with 
status 1!
 E [29/May/2015:09:54:39 -0300] [cups-deviced] PID 12722 (hpfax) stopped with 
status 1!
 W [29/May/2015:09:55:28 -0300] CreateProfile failed: 
org.freedesktop.ColorManager.AlreadyExists:profile id 
'Hewlett-Packard-HP-LaserJet-1018-Gray..' already exists
CurrentDesktop: Unity
Date: Fri May 29 10:00:31 2015
InstallationDate: Installed on 2015-01-15 (134 days ago)
InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release i386 (20141022.1)
Lpstat:
 device for Canon-iP1900-series: usb://Canon/iP1900%20series?serial=C6EDE8
 device for Hewlett-Packard-HP-LaserJet-1018: 
usb://HP/LaserJet%201018?serial=LF04EKT
MachineType: Acer, inc. Aspire 5570Z
Papersize: letter
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
PpdFiles:
 Canon-iP1900-series: Canon iP1900 series Ver.3.90
 Hewlett-Packard-HP-LaserJet-1018: HP LaserJet 1018 Foomatic/foo2zjs-z1 
(recommended)
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic 
root=UUID=cb168c94-8297-42bf-9400-5acfcb55fdb2 ro quiet splash vt.handoff=7
SourcePackage: hplip
UpgradeStatus: Upgraded to vivid on 2015-04-24 (34 days ago)
dmi.bios.date: 04/10/07
dmi.bios.vendor: Acer
dmi.bios.version: v1.3505
dmi.board.name: Prespa1
dmi.board.vendor: Acer, Inc.
dmi.board.version: Not Applicable
dmi.chassis.type: 1
dmi.chassis.vendor: Acer, Inc.
dmi.chassis.version: N/A
dmi.modalias:

[Desktop-packages] [Bug 1283601] Re: More than one web app can be loaded at the same time

2015-05-29 Thread Alexandre Abreu

** Changed in: libunity-webapps
   Status: Fix Committed = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to webapps-applications in Ubuntu.
https://bugs.launchpad.net/bugs/1283601

Title:
  More than one web app can be loaded at the same time

Status in WebApps: libunity:
  Fix Released
Status in webapps-applications package in Ubuntu:
  Fix Released

Bug description:
  In trusty you can load a web app but then open multiple instances. How
  to re-produce:

   1. Click the Reddit icon in the launcher. A new reddit icon appears in the 
launcher; there are now two icons.
   2. Click the same icon you clicked first and an additional reddit window 
appears.

  I would expect that I click the reddit icon and it would display an
  arrow next to the existing icon (like normal apps) and if I want
  another instance I can middle-click.

To manage notifications about this bug go to:
https://bugs.launchpad.net/libunity-webapps/+bug/1283601/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460078] [NEW] libreoffice-kde does not provide the system (=KDE) file dialog

2015-05-29 Thread RJVB

Public bug reported:

This report concerns KUbuntu Trust 14.04.2 LTS and libreoffice
1:4.2.8-0ubuntu2 .

LibreOffice has an option (tick box) in the general settings that allows
the user to chose between LibreOffice's own file dialogs, and the
system dialogs.

When the libreoffice-kde package is not installed, this indeed works,
and one gets (what appears to be) the standard GTk file dialog for
saving, opening, etc.

As soon as libreoffice-kde is installed, one always gets the LibreOffice
dialog, regardless of the setting of this option. This degrades DE
homogeneity, and also causes a loss of features present in the KDE file
dialog but not in LibreOffice's.

Keeping libreoffice-kde uninstalled would be a workaround, but leads to
worse discomfort (very ugly and heavy UI font).

** Affects: libreoffice (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1460078

Title:
  libreoffice-kde does not provide the system (=KDE) file dialog

Status in libreoffice package in Ubuntu:
  New

Bug description:
  This report concerns KUbuntu Trust 14.04.2 LTS and libreoffice
  1:4.2.8-0ubuntu2 .

  LibreOffice has an option (tick box) in the general settings that
  allows the user to chose between LibreOffice's own file dialogs, and
  the system dialogs.

  When the libreoffice-kde package is not installed, this indeed works,
  and one gets (what appears to be) the standard GTk file dialog for
  saving, opening, etc.

  As soon as libreoffice-kde is installed, one always gets the
  LibreOffice dialog, regardless of the setting of this option. This
  degrades DE homogeneity, and also causes a loss of features present in
  the KDE file dialog but not in LibreOffice's.

  Keeping libreoffice-kde uninstalled would be a workaround, but leads
  to worse discomfort (very ugly and heavy UI font).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1460078/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460082] [NEW] ModemManager incorrectly grabs Bare Conductive Touch Board

2015-05-29 Thread Stefan

Public bug reported:

When connecting a Bare Conductive Touch Board device
(http://www.bareconductive.com/shop/touch-board/), modemmanager grabs
the /dev/ttyACM0 -device. This means the Arduino programming IDE cannot
upload to the board.

I'm running 14.04 LTSl. Modemmanager is 1.0.0-2 trusty

WORKAROUND:

This bug can be solved by adding the line

ATTRS{idVendor}==2a6e, ENV{ID_MM_DEVICE_IGNORE}=1

to /lib/udev/rules.d/77-mm-usb-device-blacklist.rules.

I realise that this will block all Bare Conductive devices - however
they are all Arduino-based and none will ever be actual modems - I can
say this with some confidence as I am their chief development engineer!

** Affects: modemmanager (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to modemmanager in Ubuntu.
https://bugs.launchpad.net/bugs/1460082

Title:
  ModemManager incorrectly grabs Bare Conductive Touch Board

Status in modemmanager package in Ubuntu:
  New

Bug description:
  When connecting a Bare Conductive Touch Board device
  (http://www.bareconductive.com/shop/touch-board/), modemmanager grabs
  the /dev/ttyACM0 -device. This means the Arduino programming IDE
  cannot upload to the board.

  I'm running 14.04 LTSl. Modemmanager is 1.0.0-2 trusty

  WORKAROUND:

  This bug can be solved by adding the line

  ATTRS{idVendor}==2a6e, ENV{ID_MM_DEVICE_IGNORE}=1

  to /lib/udev/rules.d/77-mm-usb-device-blacklist.rules.

  I realise that this will block all Bare Conductive devices - however
  they are all Arduino-based and none will ever be actual modems - I can
  say this with some confidence as I am their chief development
  engineer!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/modemmanager/+bug/1460082/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1449892] Re: yuv to rgb translation is faulty for Intel Generation 8 Graphics

** Changed in: xserver-xorg-video-intel (Ubuntu)
   Importance: Undecided = Medium

** Changed in: xserver-xorg-video-intel (Ubuntu Vivid)
   Importance: Undecided = Medium

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1449892

Title:
  yuv to rgb translation is faulty for Intel Generation 8 Graphics

Status in X.org xf86-video-intel:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Confirmed
Status in xserver-xorg-video-intel source package in Vivid:
  In Progress
Status in xserver-xorg-video-intel package in Debian:
  Confirmed

Bug description:
  [Impact]
  running mplayer or vlc the video output  is incorrect.  There are are 2 line 
steps on edges.
  The problems is known and there is already an upstream fix available.
  http://www.spinics.net/lists/intel-gfx/msg65030.html

  I have rebuild the driver with git from 2015-04-28, and the video
  output is correct now.

  The bugfix is for Generation 8 Intel graphics like Intel NUC with Core 
I5-5250 and HD6000 grahics in my case.
  The used version is Ubuntu vivid amd64.

  [Test Case]
  Launch Skype, VLC or mplayer and use xv as video output.
  A sample of the corruption can be found here:
  https://a.disquscdn.com/uploads/mediaembed/images/1942/867/original.jpg

  [Regression Potential]
  None. Admittedly I may not be the right one to fully assess the risk.
  Any help on this matter would be much appreciated.

  [Other Info]
  Already fixed upstream.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1449892/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460126] [NEW] Zenity should build-depend on gnome-common

2015-05-29 Thread TomasHnyk

Public bug reported:

Zenity refuses to run ./autogen without having gnome-common installed,
so it should build-depend on it.

** Affects: zenity (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to zenity in Ubuntu.
https://bugs.launchpad.net/bugs/1460126

Title:
  Zenity should build-depend on gnome-common

Status in zenity package in Ubuntu:
  New

Bug description:
  Zenity refuses to run ./autogen without having gnome-common installed,
  so it should build-depend on it.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/zenity/+bug/1460126/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1453442] Re: Destination folder (null) does not exist when dragging over chromium

2015-05-29 Thread Victor Englund

This  also happens when dragging onto another monitor (in a dual monitor
setup).

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to file-roller in Ubuntu.
https://bugs.launchpad.net/bugs/1453442

Title:
  Destination folder (null) does not exist when dragging over chromium

Status in file-roller package in Ubuntu:
  Confirmed

Bug description:
  Steps to reproduce:
  - Open an archive with the file-roller gui 
  - Place the window over top of chromium
  - Open a nautilus window
  - Drag the contents of file-roller (to extract them) over to the nautilus 
window making sure that the dragged content passes over the chromium window.

  Expected Results:
  - Nothing should happen until I drop the contents onto the nautilus window at 
which point the content is extracted

  Actual Results:
  - An error message pops up: Destination folder (null) does not exist. Do 
you want to create it

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: file-roller 3.14.2-0ubuntu5
  ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
  Uname: Linux 3.19.0-15-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Sat May  9 13:04:35 2015
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2014-08-21 (261 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  SourcePackage: file-roller
  UpgradeStatus: Upgraded to vivid on 2015-04-07 (31 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/file-roller/+bug/1453442/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460080] Re: HP laserjet 1018 no longer works

2015-05-29 Thread Till Kamppeter

Can you run

hp-plugin

in a terminal window and follow the instructions on the screen.

** Changed in: hplip (Ubuntu)
   Status: New = Incomplete

** Also affects: hplip
   Importance: Undecided
   Status: New

** Changed in: hplip
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to hplip in Ubuntu.
https://bugs.launchpad.net/bugs/1460080

Title:
  HP laserjet 1018 no longer works

Status in HP Linux Imaging and Printing:
  Incomplete
Status in hplip package in Ubuntu:
  Incomplete

Bug description:
  My first experience of Ubuntu was Utopic Unicorn, about 2 months ago. I 
installed HPLIP, so as to use my HP Laserjet 1018 printer, and it all worked 
fine. On upgrading to Ubuntu 15.04, my printer stopped working. I have tried 
everything I can think of: upgrading HPLIP, removing HPLIP and installing an 
alternative driver (foomatic), deleting and adding the printer, nothing works. 
I have also downloaded and installed all updates to Ubuntu. I have noticed, 
checking through previous bug reports, that this appears to be a recurring 
problem: people's HP printers work OK until, on upgrading Ubuntu, they suddenly 
stopped working. Can it be that beta versions are not being properly tested? 
Having spent most of yesterday on this problem, and having being seriously 
ticked off by my boss, about it, I am unwilling to spend further time on it. I 
was going to include some screens shots to support my case, but I can't see how 
to do this. Here are some more details:
  As of now:
  listed printers are: Canon ip1900 series
 HP Laserjet 1018 (default) / Enabled -- 
OK / Shared -- OK
 
Description: Hewlett-Packard HP LaserJet 1018
 
Location: tristram-Aspire-5570Z
 Device 
URI: usb://HP/LaserJet%201018?serial=LF04EKT
 Make 
and Model: HP LaserJet 1018 Foomatic/foo2zjs-z1 (recommended)
 
Printer state: Idle - Sending data to printer.

  Trying to print a test page produces a little box that says: Submitted - 
Test page submitted as job (whatever)
  Noticing that, above, the driver appears to be set to Foomatic, I tried 
changing it. Now it reads:
 Make 
and Model: HP LaserJet 1018, hpcups 3.15.4, requires proprietary plugin

  I pressed the Print Test Page button, and got:  Submitted - Test page 
submitted as job 64. As usual, nothing happens.
  All this time, the printer is turned on, and connected to my laptop via USB 
cable, needless to say. On viewing Document print status I have: Job: 64 /User: 
tristram /Document: Test Page / Printer: Hewlett-Packard-HP-LaserJet-1018 / 
Size: 1k /Time submitted: 11 minutes ago / Status (printer appears with a red 
sign) : Stopped - Printer error
  On viewing job attributes, I have (for instance, a screen shot would be 
really useful here):
  job-more-info: http://localhost:631/jobs/64 (...)
  job-printer-state-message: Filter failed
  job-printer-state-reasons: ['hplip.plugin-error'] (...)
  job-state-reasons: job-completed-with-errors  (...)

  There's more info in this report, but I don't know what you need...

  I hope this is enough for you people to work on. Meanwhile, I'm
  seriously thinking of downgrading my Ubuntu version to what it was
  before, and HPLIP also, except that I don't know for sure what the
  working version was

  Thank you very much,

  Tristram

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: hplip 3.15.2-0ubuntu4.1
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic i686
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: i386
  CupsErrorLog:
   E [29/May/2015:09:53:50 -0300] [cups-deviced] PID 12270 (hpfax) stopped with 
status 1!
   E [29/May/2015:09:54:39 -0300] [cups-deviced] PID 12722 (hpfax) stopped with 
status 1!
   W [29/May/2015:09:55:28 -0300] CreateProfile failed: 
org.freedesktop.ColorManager.AlreadyExists:profile id 
'Hewlett-Packard-HP-LaserJet-1018-Gray..' already exists
  CurrentDesktop: Unity
  Date: Fri May 29 10:00:31 2015
  InstallationDate: Installed on 2015-01-15 (134 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release i386 (20141022.1)
  Lpstat:
   device for Canon-iP1900-series: usb://Canon/iP1900%20series?serial=C6EDE8
   device for Hewlett-Packard-HP-LaserJet-1018: 
usb://HP/LaserJet%201018?serial=LF04EKT
  MachineType: Acer, inc. Aspire 5570Z
  Papersize: letter
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 no card
  PpdFiles:

[Desktop-packages] [Bug 775345] Re: USB headset not selectable in Output tab of Sound Preferences

2015-05-29 Thread Benoit Grégoire

Same problem on 15.04, killall pulseaudio also fixes it for me.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-media in Ubuntu.
https://bugs.launchpad.net/bugs/775345

Title:
  USB headset not selectable in Output tab of Sound Preferences

Status in gnome-media package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: gnome-media

  After upgrading from Maverick to Natty, my USB headset shows up in the
  Hardware tab, but not the Output tab.  Hence, it is no longer
  selectable as an output device.

  Details when plugging in headset:
  May  2 01:59:17 tiger kernel: [84407.100862] usb 2-2.1.3: new full speed USB 
device using ehci_hcd and address 12
  May  2 01:59:17 tiger kernel: [84407.285825] input: Logitech Logitech USB 
Headset as 
/devices/pci:00/:00:04.1/usb2/2-2/2-2.1/2-2.1.3/2-2.1.3:1.3/input/input9
  May  2 01:59:17 tiger kernel: [84407.285936] generic-usb 0003:046D:0A02.0006: 
input,hidraw2: USB HID v1.00 Device [Logitech Logitech USB Headset] on 
usb-:00:04.1-2.1.3/input3

  Details in Hardware tab:
  Premium Stereo USB Headset 350
  1 Output
  Analog Stereo Output

  ProblemType: Bug
  DistroRelease: Ubuntu 11.04
  Package: gnome-media 2.32.0-0ubuntu7
  ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
  Uname: Linux 2.6.38-8-generic x86_64
  NonfreeKernelModules: nvidia
  Architecture: amd64
  Date: Mon May  2 01:52:08 2011
  ExecutablePath: /usr/bin/gnome-volume-control
  InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100427.1)
  ProcEnviron:
   SHELL=/bin/zsh
   LANGUAGE=en_CA:en
   LANG=en_CA.UTF-8
  SourcePackage: gnome-media
  UpgradeStatus: Upgraded to natty on 2011-04-30 (1 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-media/+bug/775345/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1154431] Re: Unity doesn't start up

2015-05-29 Thread Dave Chiluk

This no longer looks to be an issue in 14.04+ so I'm going to close this
out as won't fix.

** Changed in: nvidia-graphics-drivers (Ubuntu)
   Status: Confirmed = Won't Fix

** Changed in: unity (Ubuntu)
   Status: Confirmed = Won't Fix

** Changed in: unity
   Status: Confirmed = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
Matching subscriptions: dp-unity
https://bugs.launchpad.net/bugs/1154431

Title:
  Unity doesn't start up

Status in Unity:
  Fix Released
Status in nvidia-graphics-drivers package in Ubuntu:
  Won't Fix
Status in unity package in Ubuntu:
  Won't Fix

Bug description:
  I'm running stock 13.04. Previously I was affected by bug 982889. Now
  that X comes up, I don't see unity - no common toolbar on the top, no
  icons on the left side, no unity in the process list.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: xorg 1:7.7+1ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-12.21-generic 3.8.2
  Uname: Linux 3.8.0-12-generic x86_64
  NonfreeKernelModules: nvidia
  .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: 
'/proc/driver/nvidia/gpus/0'
  .proc.driver.nvidia.registry: Binary: 
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86_64 Kernel Module  304.84  Wed Feb 27 04:58:49 
PST 2013
   GCC version:  gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-22ubuntu3)
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.9.1-0ubuntu1
  Architecture: amd64
  CompizPlugins: 
[core,bailer,detection,composite,opengl,decor,mousepoll,vpswitch,regex,animation,snap,expo,move,compiztoolbox,place,grid,imgpng,gnomecompat,wall,ezoom,workarounds,resize,fade,unitymtgrabhandles,scale,session,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Wed Mar 13 10:34:40 2013
  DistUpgraded: Fresh install
  DistroCodename: raring
  DistroVariant: ubuntu
  DkmsStatus: nvidia-304, 304.84, 3.8.0-12-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   NVIDIA Corporation G86 [GeForce 8400 GS] [10de:0422] (rev a1) (prog-if 00 
[VGA controller])
 Subsystem: eVga.com. Corp. Device [3842:c733]
  InstallationDate: Installed on 2013-02-01 (39 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64+mac (20130130)
  MachineType: Intel To be filled by O.E.M.
  MarkForUpload: True
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-12-generic 
root=UUID=0084a9a5-74cd-47ba-afe6-a47d02d0b262 ro quiet splash
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/29/2009
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.3
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: To be filled by O.E.M.
  dmi.board.vendor: Intel
  dmi.board.version: To be filled by O.E.M.
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr4.6.3:bd10/29/2009:svnIntel:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnIntel:rnTobefilledbyO.E.M.:rvrTobefilledbyO.E.M.:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To be filled by O.E.M.
  dmi.product.version: To be filled by O.E.M.
  dmi.sys.vendor: Intel
  version.compiz: compiz 1:0.9.9~daily13.03.08-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.42-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.2-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.2-0ubuntu1
  version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.2-0ubuntu3
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.4-0ubuntu1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.6-0ubuntu3
  xserver.bootTime: Wed Mar 13 10:17:21 2013
  xserver.configfile: default
  xserver.errors:
   open /dev/dri/card0: No such file or directory
   open /dev/dri/card0: No such file or directory
   open /dev/fb0: No such file or directory
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   
  xserver.version: 2:1.13.2-0ubuntu3

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/1154431/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1449892] Re: yuv to rgb translation is faulty for Intel Generation 8 Graphics

** Description changed:

- running mplayer or vlc the video output  is incorrect.  There are are 2 line 
steps on edges. 
+ [Impact]
+ running mplayer or vlc the video output  is incorrect.  There are are 2 line 
steps on edges.
  The problems is known and there is already an upstream fix available.
  http://www.spinics.net/lists/intel-gfx/msg65030.html
  
  I have rebuild the driver with git from 2015-04-28, and the video output
  is correct now.
  
  The bugfix is for Generation 8 Intel graphics like Intel NUC with Core 
I5-5250 and HD6000 grahics in my case.
  The used version is Ubuntu vivid amd64.
+ 
+ [Test Case]
+ Launch Skype, VLC or mplayer and use xv as video output.
+ A sample of the corruption can be found here:
+ https://a.disquscdn.com/uploads/mediaembed/images/1942/867/original.jpg
+ 
+ [Regression Potential]
+ None. Admittedly I may not be the right one to fully assess the risk.
+ Any help on this matter would be much appreciated.

** Description changed:

  [Impact]
  running mplayer or vlc the video output  is incorrect.  There are are 2 line 
steps on edges.
  The problems is known and there is already an upstream fix available.
  http://www.spinics.net/lists/intel-gfx/msg65030.html
  
  I have rebuild the driver with git from 2015-04-28, and the video output
  is correct now.
  
  The bugfix is for Generation 8 Intel graphics like Intel NUC with Core 
I5-5250 and HD6000 grahics in my case.
  The used version is Ubuntu vivid amd64.
  
  [Test Case]
  Launch Skype, VLC or mplayer and use xv as video output.
  A sample of the corruption can be found here:
  https://a.disquscdn.com/uploads/mediaembed/images/1942/867/original.jpg
  
  [Regression Potential]
  None. Admittedly I may not be the right one to fully assess the risk.
  Any help on this matter would be much appreciated.
+ 
+ [Other Info]
+ Already fixed upstream.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1449892

Title:
  yuv to rgb translation is faulty for Intel Generation 8 Graphics

Status in X.org xf86-video-intel:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Confirmed
Status in xserver-xorg-video-intel source package in Vivid:
  In Progress
Status in xserver-xorg-video-intel package in Debian:
  Confirmed

Bug description:
  [Impact]
  running mplayer or vlc the video output  is incorrect.  There are are 2 line 
steps on edges.
  The problems is known and there is already an upstream fix available.
  http://www.spinics.net/lists/intel-gfx/msg65030.html

  I have rebuild the driver with git from 2015-04-28, and the video
  output is correct now.

  The bugfix is for Generation 8 Intel graphics like Intel NUC with Core 
I5-5250 and HD6000 grahics in my case.
  The used version is Ubuntu vivid amd64.

  [Test Case]
  Launch Skype, VLC or mplayer and use xv as video output.
  A sample of the corruption can be found here:
  https://a.disquscdn.com/uploads/mediaembed/images/1942/867/original.jpg

  [Regression Potential]
  None. Admittedly I may not be the right one to fully assess the risk.
  Any help on this matter would be much appreciated.

  [Other Info]
  Already fixed upstream.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1449892/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1201528] Re: [INTEL DP55WG, Realtek ALC889] - Audio Playback Unavailable

[alsa-sink-ALC889 Analog] alsa-sink.c: Underrun!

this seem not alsa driver, it occur whe client did not supply audio and
server has nothing to write

in theory, the server have to call snd_pcm_foreward to recover

http://cgit.freedesktop.org/pulseaudio/pulseaudio/log/src/modules/alsa
/alsa-sink.c?qt=grepq=underrun

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1201528

Title:
  [INTEL DP55WG,Realtek ALC889] - Audio Playback Unavailable

Status in alsa-driver package in Ubuntu:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in alsa-driver source package in Vivid:
  Confirmed
Status in linux source package in Vivid:
  Confirmed

Bug description:
  This is a fresh upgrade to raring. During the weekend, I updated from
  precise to quantal, and from there to raring. I did not use sound
  while the system was in quantal, so no idea if the bug was present
  there as well.

  The symptom is:

  * after some period of sound usage, playback stops working

  What I mean with sound usage is:

  I tried having a meeting with: mumble, skype, and google hangout, and
  in all three cases, audio input/outout will work just fine for ~5
  minutes, and the playback just dies (people tell me they keep
  listening to me, so mic works fine).

  The only way to solve this is by rebooting. After one of the reboots,
  I was able to play a 20 minute video with mplayer with no further
  issue. Then opened skype and after ~3-5 minute talk, audio playback
  died again.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
  Uname: Linux 3.8.0-26-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nessita2627 F pulseaudio
  Date: Mon Jul 15 14:40:20 2013
  InstallationDate: Installed on 2011-12-20 (572 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha amd64 
(2029.1)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:MID failed
  Symptom_AlsaPlaybackTestStderr:
   W r i t e   e r r o r :   - 5 , I n p u t / o u t p u t   e r r o r 
x r u n _ r e c o v e r y   f a i l e d :   - 5 , I n p u t / o u t p u t   
e r r o r 
T r a n s f e r   f a i l e d :   O p e r a t i o n   n o t   p e r m i t t 
e d
  Symptom_Card: Built-in Audio - HDA Intel MID
  Symptom_Jack: Green Headphone Out, Front
  Symptom_Type: None of the above
  Title: [, Realtek ALC889, Green Headphone Out, Front] Playback problem
  UpgradeStatus: Upgraded to raring on 2013-07-13 (2 days ago)
  dmi.bios.date: 08/05/2009
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: KGIBX10J.86A.3206.2009.0805.1855
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: DP55WG
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAE57269-404
  dmi.chassis.type: 2
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrKGIBX10J.86A.3206.2009.0805.1855:bd08/05/2009:svn:pn:pvr:rvnIntelCorporation:rnDP55WG:rvrAAE57269-404:cvn:ct2:cvr:
  --- 
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nessita   13188 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.04
  HibernationDevice: RESUME=UUID=bd987ac2-eb4b-43e7-881b-4cf2b5078e4b
  InstallationDate: Installed on 2014-05-11 (366 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  Package: linux (not installed)
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-16-generic 
root=UUID=e91bd3a4-787b-404b-9f19-aa6dcbe707b0 ro quiet splash
  ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-16-generic N/A
   linux-backports-modules-3.19.0-16-generic  N/A
   linux-firmware 1.143
  RfKill:
   
  Tags:  vivid vivid vivid vivid
  Uname: Linux 3.19.0-16-generic x86_64
  UpgradeStatus: Upgraded to vivid on 2015-03-11 (61 days ago)
  UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 08/05/2009
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: KGIBX10J.86A.3206.2009.0805.1855
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: DP55WG
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAE57269-404
  dmi.chassis.type: 2
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrKGIBX10J.86A.3206.2009.0805.1855:bd08/05/2009:svn:pn:pvr:rvnIntelCorporation:rnDP55WG:rvrAAE57269-404:cvn:ct2:cvr:

To manage notifications about this bug go to:

[Desktop-packages] [Bug 1399437] Re: Update to 3.14

2015-05-29 Thread Iain Lane

Done, forgot to close the bug, sorry

** Changed in: yelp (Ubuntu)
   Status: In Progress = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to yelp in Ubuntu.
https://bugs.launchpad.net/bugs/1399437

Title:
  Update to 3.14

Status in yelp package in Ubuntu:
  Fix Released

Bug description:
  Update to 3.14

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/yelp/+bug/1399437/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1201528] Re: [INTEL DP55WG, Realtek ALC889] - Audio Playback Unavailable

you can add pa_alsa_dump() immediately after pa_log_info(Underrun!) to
verify appl_ptr is behind hwptr since those pulseaudio clients did not
supply sufficient audio to the server


the server seem have no ways to recover since it can not write any data which 
affect the timing
it just hope the client can supply the missing data at later time

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1201528

Title:
  [INTEL DP55WG,Realtek ALC889] - Audio Playback Unavailable

Status in alsa-driver package in Ubuntu:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in alsa-driver source package in Vivid:
  Confirmed
Status in linux source package in Vivid:
  Confirmed

Bug description:
  This is a fresh upgrade to raring. During the weekend, I updated from
  precise to quantal, and from there to raring. I did not use sound
  while the system was in quantal, so no idea if the bug was present
  there as well.

  The symptom is:

  * after some period of sound usage, playback stops working

  What I mean with sound usage is:

  I tried having a meeting with: mumble, skype, and google hangout, and
  in all three cases, audio input/outout will work just fine for ~5
  minutes, and the playback just dies (people tell me they keep
  listening to me, so mic works fine).

  The only way to solve this is by rebooting. After one of the reboots,
  I was able to play a 20 minute video with mplayer with no further
  issue. Then opened skype and after ~3-5 minute talk, audio playback
  died again.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
  Uname: Linux 3.8.0-26-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nessita2627 F pulseaudio
  Date: Mon Jul 15 14:40:20 2013
  InstallationDate: Installed on 2011-12-20 (572 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha amd64 
(2029.1)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:MID failed
  Symptom_AlsaPlaybackTestStderr:
   W r i t e   e r r o r :   - 5 , I n p u t / o u t p u t   e r r o r 
x r u n _ r e c o v e r y   f a i l e d :   - 5 , I n p u t / o u t p u t   
e r r o r 
T r a n s f e r   f a i l e d :   O p e r a t i o n   n o t   p e r m i t t 
e d
  Symptom_Card: Built-in Audio - HDA Intel MID
  Symptom_Jack: Green Headphone Out, Front
  Symptom_Type: None of the above
  Title: [, Realtek ALC889, Green Headphone Out, Front] Playback problem
  UpgradeStatus: Upgraded to raring on 2013-07-13 (2 days ago)
  dmi.bios.date: 08/05/2009
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: KGIBX10J.86A.3206.2009.0805.1855
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: DP55WG
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAE57269-404
  dmi.chassis.type: 2
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrKGIBX10J.86A.3206.2009.0805.1855:bd08/05/2009:svn:pn:pvr:rvnIntelCorporation:rnDP55WG:rvrAAE57269-404:cvn:ct2:cvr:
  --- 
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nessita   13188 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.04
  HibernationDevice: RESUME=UUID=bd987ac2-eb4b-43e7-881b-4cf2b5078e4b
  InstallationDate: Installed on 2014-05-11 (366 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  Package: linux (not installed)
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-16-generic 
root=UUID=e91bd3a4-787b-404b-9f19-aa6dcbe707b0 ro quiet splash
  ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-16-generic N/A
   linux-backports-modules-3.19.0-16-generic  N/A
   linux-firmware 1.143
  RfKill:
   
  Tags:  vivid vivid vivid vivid
  Uname: Linux 3.19.0-16-generic x86_64
  UpgradeStatus: Upgraded to vivid on 2015-03-11 (61 days ago)
  UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 08/05/2009
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: KGIBX10J.86A.3206.2009.0805.1855
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: DP55WG
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAE57269-404
  dmi.chassis.type: 2
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrKGIBX10J.86A.3206.2009.0805.1855:bd08/05/2009:svn:pn:pvr:rvnIntelCorporation:rnDP55WG:rvrAAE57269-404:cvn:ct2:cvr:

To manage notifications

[Desktop-packages] [Bug 1460153] [NEW] Evince fails to snap left/right in Gnome Shell with 9 pages

2015-05-29 Thread Joshua O'Leary

Public bug reported:

Evince fails to snap to left or right edges in Gnome Shell if the pdf opened 
has 10 or more pages.
To reproduce:

1) Open a pdf in evince
2) Try to snap to left and right screen edges by dragging or using Super+L / 
Super+R
3) Observe that this doesn't work correctly

A sample pdf has been attached for testing purposes

ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: evince 3.14.2-0ubuntu2
ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
Uname: Linux 3.19.0-18-generic x86_64
ApportVersion: 2.17.2-0ubuntu1.1
Architecture: amd64
CurrentDesktop: GNOME
Date: Fri May 29 17:50:05 2015
InstallationDate: Installed on 2015-05-10 (19 days ago)
InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Release amd64 (20150422)
KernLog:
 [12516.809554] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
 [12516.822305] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
 [22153.473615] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
 [22153.487176] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
SourcePackage: evince
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: evince (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug vivid

** Attachment added: Test case pdf file
   
https://bugs.launchpad.net/bugs/1460153/+attachment/4406753/+files/pagetest.pdf

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evince in Ubuntu.
https://bugs.launchpad.net/bugs/1460153

Title:
  Evince fails to snap left/right in Gnome Shell with 9 pages

Status in evince package in Ubuntu:
  New

Bug description:
  Evince fails to snap to left or right edges in Gnome Shell if the pdf opened 
has 10 or more pages.
  To reproduce:

  1) Open a pdf in evince
  2) Try to snap to left and right screen edges by dragging or using Super+L / 
Super+R
  3) Observe that this doesn't work correctly

  A sample pdf has been attached for testing purposes

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: evince 3.14.2-0ubuntu2
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Fri May 29 17:50:05 2015
  InstallationDate: Installed on 2015-05-10 (19 days ago)
  InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Release amd64 
(20150422)
  KernLog:
   [12516.809554] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
   [12516.822305] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
   [22153.473615] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
   [22153.487176] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
  SourcePackage: evince
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1460153/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1201528] Re: [INTEL DP55WG, Realtek ALC889] - Audio Playback Unavailable

2015-05-29 Thread Joseph Salisbury

Can you now test v3.8-rc1?  If it exhibits the bug we can bisect between
3.7 final and 3.8-rc1.  The v3.8-rc1 kernel can be downloaded from:

http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.8-rc1-raring/

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1201528

Title:
  [INTEL DP55WG,Realtek ALC889] - Audio Playback Unavailable

Status in alsa-driver package in Ubuntu:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in alsa-driver source package in Vivid:
  Confirmed
Status in linux source package in Vivid:
  Confirmed

Bug description:
  This is a fresh upgrade to raring. During the weekend, I updated from
  precise to quantal, and from there to raring. I did not use sound
  while the system was in quantal, so no idea if the bug was present
  there as well.

  The symptom is:

  * after some period of sound usage, playback stops working

  What I mean with sound usage is:

  I tried having a meeting with: mumble, skype, and google hangout, and
  in all three cases, audio input/outout will work just fine for ~5
  minutes, and the playback just dies (people tell me they keep
  listening to me, so mic works fine).

  The only way to solve this is by rebooting. After one of the reboots,
  I was able to play a 20 minute video with mplayer with no further
  issue. Then opened skype and after ~3-5 minute talk, audio playback
  died again.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
  Uname: Linux 3.8.0-26-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nessita2627 F pulseaudio
  Date: Mon Jul 15 14:40:20 2013
  InstallationDate: Installed on 2011-12-20 (572 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha amd64 
(2029.1)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:MID failed
  Symptom_AlsaPlaybackTestStderr:
   W r i t e   e r r o r :   - 5 , I n p u t / o u t p u t   e r r o r 
x r u n _ r e c o v e r y   f a i l e d :   - 5 , I n p u t / o u t p u t   
e r r o r 
T r a n s f e r   f a i l e d :   O p e r a t i o n   n o t   p e r m i t t 
e d
  Symptom_Card: Built-in Audio - HDA Intel MID
  Symptom_Jack: Green Headphone Out, Front
  Symptom_Type: None of the above
  Title: [, Realtek ALC889, Green Headphone Out, Front] Playback problem
  UpgradeStatus: Upgraded to raring on 2013-07-13 (2 days ago)
  dmi.bios.date: 08/05/2009
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: KGIBX10J.86A.3206.2009.0805.1855
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: DP55WG
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAE57269-404
  dmi.chassis.type: 2
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrKGIBX10J.86A.3206.2009.0805.1855:bd08/05/2009:svn:pn:pvr:rvnIntelCorporation:rnDP55WG:rvrAAE57269-404:cvn:ct2:cvr:
  --- 
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nessita   13188 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.04
  HibernationDevice: RESUME=UUID=bd987ac2-eb4b-43e7-881b-4cf2b5078e4b
  InstallationDate: Installed on 2014-05-11 (366 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  Package: linux (not installed)
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-16-generic 
root=UUID=e91bd3a4-787b-404b-9f19-aa6dcbe707b0 ro quiet splash
  ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-16-generic N/A
   linux-backports-modules-3.19.0-16-generic  N/A
   linux-firmware 1.143
  RfKill:
   
  Tags:  vivid vivid vivid vivid
  Uname: Linux 3.19.0-16-generic x86_64
  UpgradeStatus: Upgraded to vivid on 2015-03-11 (61 days ago)
  UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 08/05/2009
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: KGIBX10J.86A.3206.2009.0805.1855
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: DP55WG
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAE57269-404
  dmi.chassis.type: 2
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrKGIBX10J.86A.3206.2009.0805.1855:bd08/05/2009:svn:pn:pvr:rvnIntelCorporation:rnDP55WG:rvrAAE57269-404:cvn:ct2:cvr:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1201528/+subscriptions

-- 
Mailing list:

[Desktop-packages] [Bug 1443774] Re: Horizontal scrolling is backwards

This bug was fixed in the package gtk+3.0 - 3.14.13-0ubuntu1

---
gtk+3.0 (3.14.13-0ubuntu1) vivid; urgency=medium

  * Update Vcs-Bzr for vivid stable branch
  * New upstream release 3.14.13 (LP: #1449461), fixing bugs:
+ most horizontal sliders are inverted when scrolled with wheel (LP:
  #1443774)
+ CSD: can't open window menu using right click after moving window
+ Popovers inside local plugs don't get size_allocate() called
+ Split Headerbar unmaximize
+ GtkMessageDialog: Minor documentation update
+ GdkOffscreenWindow should not segfault on gdk_window_beep()
+ GtkApplication: Prevent more crashes on shutdown
  * d/p/0001-GtkApplication-Prevent-more-crashes-around-shutdown.patch:
Dropped, this is fixed upstream in this release.

 -- Iain Lane iain.l...@canonical.com  Tue, 28 Apr 2015 11:48:16 +0100

** Changed in: gtk+3.0 (Ubuntu)
   Status: Triaged = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1443774

Title:
  Horizontal scrolling is backwards

Status in gtk+3.0 package in Ubuntu:
  Fix Released

Bug description:
  Don't know where to report this specifically, sorry.

  In native gnome applications (file manager, gedit, etc), scrolling
  horizontally via Trackpoint middle-button scrolling is backwards:

  * Middle button + trackpoint move up = scroll up (expected)
  * Middle button + trackpoint move down = scroll down (expected)
  * Middle button + trackpoint move left = scroll right (backwards)
  * Middle button + trackpoint move right = scroll left (backwards)

  Scolling horizontally in Firefox and Chromium work as expected.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: unity 7.3.2+15.04.20150410.1-0ubuntu1
  ProcVersionSignature: Ubuntu 3.19.0-13.13-generic 3.19.3
  Uname: Linux 3.19.0-13-generic x86_64
  ApportVersion: 2.17-0ubuntu2
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CurrentDesktop: Unity
  Date: Mon Apr 13 23:36:58 2015
  InstallationDate: Installed on 2015-03-07 (38 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  SourcePackage: unity
  UpgradeStatus: Upgraded to vivid on 2015-03-29 (16 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1443774/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1449461] Re: [SRU] New stable release 3.14.13

This bug was fixed in the package gtk+3.0 - 3.14.13-0ubuntu1

---
gtk+3.0 (3.14.13-0ubuntu1) vivid; urgency=medium

  * Update Vcs-Bzr for vivid stable branch
  * New upstream release 3.14.13 (LP: #1449461), fixing bugs:
+ most horizontal sliders are inverted when scrolled with wheel (LP:
  #1443774)
+ CSD: can't open window menu using right click after moving window
+ Popovers inside local plugs don't get size_allocate() called
+ Split Headerbar unmaximize
+ GtkMessageDialog: Minor documentation update
+ GdkOffscreenWindow should not segfault on gdk_window_beep()
+ GtkApplication: Prevent more crashes on shutdown
  * d/p/0001-GtkApplication-Prevent-more-crashes-around-shutdown.patch:
Dropped, this is fixed upstream in this release.

 -- Iain Lane iain.l...@canonical.com  Tue, 28 Apr 2015 11:48:16 +0100

** Changed in: gtk+3.0 (Ubuntu)
   Status: In Progress = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1449461

Title:
  [SRU] New stable release 3.14.13

Status in gtk+3.0 package in Ubuntu:
  Fix Released
Status in gtk+3.0 source package in Vivid:
  Fix Committed

Bug description:
  [ Description ]

  New stable bugfix release

  gtk+3.0 (3.14.13-0ubuntu1) UNRELEASED; urgency=medium

* Update Vcs-Bzr for vivid stable branch
* New upstream release 3.14.13, fixing bugs:
  + most horizontal sliders are inverted when scrolled with wheel (LP:
#1443774)
  + CSD: can't open window menu using right click after moving window
  + Popovers inside local plugs don't get size_allocate() called
  + Split Headerbar unmaximize
  + GtkMessageDialog: Minor documentation update
  + GdkOffscreenWindow should not segfault on gdk_window_beep()
  + GtkApplication: Prevent more crashes on shutdown
* d/p/0001-GtkApplication-Prevent-more-crashes-around-shutdown.patch:
  Dropped, this is fixed upstream in this release.

   -- Iain Lane iain.l...@canonical.com  Tue, 28 Apr 2015 10:20:46
  +0100

  [ QA  regression potential ]

  This is being uploaded under the GNOME MRE. You're allowed to believe
  upstream that the bugs are really fixed - just give the system a
  general once (or twice) over to see if things still work.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1449461/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460155] Re: package nvidia-opencl-icd-331 (not installed) failed to install/upgrade: próba nadpisania /usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który istnieje tak

2015-05-29 Thread Apport retracing service

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1460155

Title:
  package nvidia-opencl-icd-331 (not installed) failed to
  install/upgrade: próba nadpisania /usr/lib/i386-linux-gnu/libnvidia-
  opencl.so.331.113, który istnieje także w pakiecie nvidia-opencl-
  icd-331-updates 331.113-0ubuntu0.0.4

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  New

Bug description:
  problem upon reinstalling
  dpkg error code 1

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-opencl-icd-331 (not installed)
  ProcVersionSignature: Ubuntu 3.13.0-51.84-generic 3.13.11-ckt18
  Uname: Linux 3.13.0-51-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: i386
  Date: Fri May 29 18:53:47 2015
  DuplicateSignature: package:nvidia-opencl-icd-331:(not installed):próba 
nadpisania /usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który 
istnieje także w pakiecie nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  ErrorMessage: próba nadpisania 
/usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który istnieje także w 
pakiecie nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  InstallationDate: Installed on 2014-05-15 (379 days ago)
  InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 
(20140204)
  SourcePackage: nvidia-graphics-drivers-331
  Title: package nvidia-opencl-icd-331 (not installed) failed to 
install/upgrade: próba nadpisania 
/usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który istnieje także w 
pakiecie nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  UpgradeStatus: Upgraded to trusty on 2015-05-05 (23 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1460155/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1005914] Re: gnome-screenshot produces black screenshot with only the mouse pointer visible

2015-05-29 Thread Josh McCullough

Same issue here but with LinuxMint 17.1 running on VirtualBox 4.3.28
r100309 running on a WIn7 host. 3D acceleration enabled; screenshot
works correctly when disabling 3D acceleration.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-screenshot in Ubuntu.
https://bugs.launchpad.net/bugs/1005914

Title:
  gnome-screenshot produces black screenshot with only the mouse pointer
  visible

Status in compiz package in Ubuntu:
  Confirmed
Status in gnome-screenshot package in Ubuntu:
  Confirmed
Status in recordmydesktop package in Ubuntu:
  Confirmed
Status in virtualbox package in Ubuntu:
  Confirmed

Bug description:
  I am running Ubuntu 12.04 inside Virtualbox on a Windows host.
  3D acceleration is enabled in Virtualbox and I am using compiz + unity, NOT 
unity2d.

  gnome-screenshot produces black screenshot with only the mouse pointer 
visible.
  it does not matter if I run it by pressing the PrintScreen key or running
  gnome-screenshot -d 5
  in a terminal.

  WORKAROUND:
  use unity2d instead of compiz+unity 

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gnome-screenshot 3.4.1-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-24.39-generic 3.2.16
  Uname: Linux 3.2.0-24-generic x86_64
  ApportVersion: 2.0.1-0ubuntu7
  Architecture: amd64
  Date: Tue May 29 15:59:15 2012
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha amd64 
(2029.1)
  SourcePackage: gnome-screenshot
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1005914/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Desktop-packages] [Bug 1460080] Re: HP laserjet 1018 no longer works

2015-05-29 Thread Tristram Shorter

Hi Till,

I typed in hp-plugin in the terminal but I got and error (see file
please). What did I do wrong?

Thanks,

Tristram

 Date: Fri, 29 May 2015 15:31:18 +
 From: 1460...@bugs.launchpad.net
 To: tdshor...@hotmail.com
 Subject: [Bug 1460080] Re: HP laserjet 1018 no longer works
 
 Can you run
 
 hp-plugin
 
 in a terminal window and follow the instructions on the screen.
 
 ** Changed in: hplip (Ubuntu)
Status: New = Incomplete
 
 ** Also affects: hplip
Importance: Undecided
Status: New
 
 ** Changed in: hplip
Status: New = Incomplete
 
 -- 
 You received this bug notification because you are subscribed to the bug
 report.
 https://bugs.launchpad.net/bugs/1460080
 
 Title:
   HP laserjet 1018 no longer works
 
 Status in HP Linux Imaging and Printing:
   Incomplete
 Status in hplip package in Ubuntu:
   Incomplete
 
 Bug description:
   My first experience of Ubuntu was Utopic Unicorn, about 2 months ago. I 
 installed HPLIP, so as to use my HP Laserjet 1018 printer, and it all worked 
 fine. On upgrading to Ubuntu 15.04, my printer stopped working. I have tried 
 everything I can think of: upgrading HPLIP, removing HPLIP and installing an 
 alternative driver (foomatic), deleting and adding the printer, nothing 
 works. I have also downloaded and installed all updates to Ubuntu. I have 
 noticed, checking through previous bug reports, that this appears to be a 
 recurring problem: people's HP printers work OK until, on upgrading Ubuntu, 
 they suddenly stopped working. Can it be that beta versions are not being 
 properly tested? Having spent most of yesterday on this problem, and having 
 being seriously ticked off by my boss, about it, I am unwilling to spend 
 further time on it. I was going to include some screens shots to support my 
 case, but I can't see how to do this. Here are some more details:
   As of now:
   listed printers are: Canon ip1900 series
  HP Laserjet 1018 (default) / Enabled -- 
 OK / Shared -- OK
  
 Description: Hewlett-Packard HP LaserJet 1018
  
 Location: tristram-Aspire-5570Z
  
 Device URI: usb://HP/LaserJet%201018?serial=LF04EKT
  Make 
 and Model: HP LaserJet 1018 Foomatic/foo2zjs-z1 (recommended)
  
 Printer state: Idle - Sending data to printer.
 
   Trying to print a test page produces a little box that says: Submitted - 
 Test page submitted as job (whatever)
   Noticing that, above, the driver appears to be set to Foomatic, I tried 
 changing it. Now it reads:
  Make 
 and Model: HP LaserJet 1018, hpcups 3.15.4, requires proprietary plugin
 
   I pressed the Print Test Page button, and got:  Submitted - Test page 
 submitted as job 64. As usual, nothing happens.
   All this time, the printer is turned on, and connected to my laptop via USB 
 cable, needless to say. On viewing Document print status I have: Job: 64 
 /User: tristram /Document: Test Page / Printer: 
 Hewlett-Packard-HP-LaserJet-1018 / Size: 1k /Time submitted: 11 minutes ago / 
 Status (printer appears with a red sign) : Stopped - Printer error
   On viewing job attributes, I have (for instance, a screen shot would be 
 really useful here):
   job-more-info: http://localhost:631/jobs/64 (...)
   job-printer-state-message: Filter failed
   job-printer-state-reasons: ['hplip.plugin-error'] (...)
   job-state-reasons: job-completed-with-errors  (...)
 
   There's more info in this report, but I don't know what you need...
 
   I hope this is enough for you people to work on. Meanwhile, I'm
   seriously thinking of downgrading my Ubuntu version to what it was
   before, and HPLIP also, except that I don't know for sure what the
   working version was
 
   Thank you very much,
 
   Tristram
 
   ProblemType: Bug
   DistroRelease: Ubuntu 15.04
   Package: hplip 3.15.2-0ubuntu4.1
   ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
   Uname: Linux 3.19.0-18-generic i686
   ApportVersion: 2.17.2-0ubuntu1.1
   Architecture: i386
   CupsErrorLog:
E [29/May/2015:09:53:50 -0300] [cups-deviced] PID 12270 (hpfax) stopped 
 with status 1!
E [29/May/2015:09:54:39 -0300] [cups-deviced] PID 12722 (hpfax) stopped 
 with status 1!
W [29/May/2015:09:55:28 -0300] CreateProfile failed: 
 org.freedesktop.ColorManager.AlreadyExists:profile id 
 'Hewlett-Packard-HP-LaserJet-1018-Gray..' already exists
   CurrentDesktop: Unity
   Date: Fri May 29 10:00:31 2015
   InstallationDate: Installed on 2015-01-15 (134 days ago)
   InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release i386 (20141022.1)
   Lpstat:

[Desktop-packages] [Bug 1449892] Re: yuv to rgb translation is faulty for Intel Generation 8 Graphics

2015-05-29 Thread Adam Conrad

Hello Uwe, or anyone else affected,

Accepted xserver-xorg-video-intel into vivid-proposed. The package will
build now and be available at https://launchpad.net/ubuntu/+source
/xserver-xorg-video-intel/2:2.99.917-1~exp1ubuntu2.2 in a few hours, and
then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed.  Your feedback will aid us getting this update
out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested, and change the tag
from verification-needed to verification-done. If it does not fix the
bug for you, please add a comment stating that, and change the tag to
verification-failed.  In either case, details of your testing will help
us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Changed in: xserver-xorg-video-intel (Ubuntu Vivid)
   Status: In Progress = Fix Committed

** Tags added: verification-needed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1449892

Title:
  yuv to rgb translation is faulty for Intel Generation 8 Graphics

Status in X.org xf86-video-intel:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Confirmed
Status in xserver-xorg-video-intel source package in Vivid:
  Fix Committed
Status in xserver-xorg-video-intel package in Debian:
  Confirmed

Bug description:
  [Impact]
  running mplayer or vlc the video output  is incorrect.  There are are 2 line 
steps on edges.
  The problems is known and there is already an upstream fix available.
  http://www.spinics.net/lists/intel-gfx/msg65030.html

  I have rebuild the driver with git from 2015-04-28, and the video
  output is correct now.

  The bugfix is for Generation 8 Intel graphics like Intel NUC with Core 
I5-5250 and HD6000 grahics in my case.
  The used version is Ubuntu vivid amd64.

  [Test Case]
  Launch Skype, VLC or mplayer and use xv as video output.
  A sample of the corruption can be found here:
  https://a.disquscdn.com/uploads/mediaembed/images/1942/867/original.jpg

  [Regression Potential]
  None. Admittedly I may not be the right one to fully assess the risk.
  Any help on this matter would be much appreciated.

  [Other Info]
  Already fixed upstream.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1449892/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1453442] Re: Destination folder (null) does not exist when dragging over chromium

2015-05-29 Thread Richard Eames

@victor, I can't replicate that with my tri-monitor setup, so  it must
be a different bug (with same symptoms perhaps).

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to file-roller in Ubuntu.
https://bugs.launchpad.net/bugs/1453442

Title:
  Destination folder (null) does not exist when dragging over chromium

Status in file-roller package in Ubuntu:
  Confirmed

Bug description:
  Steps to reproduce:
  - Open an archive with the file-roller gui 
  - Place the window over top of chromium
  - Open a nautilus window
  - Drag the contents of file-roller (to extract them) over to the nautilus 
window making sure that the dragged content passes over the chromium window.

  Expected Results:
  - Nothing should happen until I drop the contents onto the nautilus window at 
which point the content is extracted

  Actual Results:
  - An error message pops up: Destination folder (null) does not exist. Do 
you want to create it

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: file-roller 3.14.2-0ubuntu5
  ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
  Uname: Linux 3.19.0-15-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Sat May  9 13:04:35 2015
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2014-08-21 (261 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  SourcePackage: file-roller
  UpgradeStatus: Upgraded to vivid on 2015-04-07 (31 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/file-roller/+bug/1453442/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460155] [NEW] package nvidia-opencl-icd-331 (not installed) failed to install/upgrade: próba nadpisania /usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który istnieje t

2015-05-29 Thread TUXMAN

Public bug reported:

problem upon reinstalling
dpkg error code 1

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: nvidia-opencl-icd-331 (not installed)
ProcVersionSignature: Ubuntu 3.13.0-51.84-generic 3.13.11-ckt18
Uname: Linux 3.13.0-51-generic i686
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.11
Architecture: i386
Date: Fri May 29 18:53:47 2015
DuplicateSignature: package:nvidia-opencl-icd-331:(not installed):próba 
nadpisania /usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który 
istnieje także w pakiecie nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
ErrorMessage: próba nadpisania 
/usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który istnieje także w 
pakiecie nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
InstallationDate: Installed on 2014-05-15 (379 days ago)
InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 
(20140204)
SourcePackage: nvidia-graphics-drivers-331
Title: package nvidia-opencl-icd-331 (not installed) failed to install/upgrade: 
próba nadpisania /usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który 
istnieje także w pakiecie nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
UpgradeStatus: Upgraded to trusty on 2015-05-05 (23 days ago)

** Affects: nvidia-graphics-drivers-331 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1460155

Title:
  package nvidia-opencl-icd-331 (not installed) failed to
  install/upgrade: próba nadpisania /usr/lib/i386-linux-gnu/libnvidia-
  opencl.so.331.113, który istnieje także w pakiecie nvidia-opencl-
  icd-331-updates 331.113-0ubuntu0.0.4

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  New

Bug description:
  problem upon reinstalling
  dpkg error code 1

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-opencl-icd-331 (not installed)
  ProcVersionSignature: Ubuntu 3.13.0-51.84-generic 3.13.11-ckt18
  Uname: Linux 3.13.0-51-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: i386
  Date: Fri May 29 18:53:47 2015
  DuplicateSignature: package:nvidia-opencl-icd-331:(not installed):próba 
nadpisania /usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który 
istnieje także w pakiecie nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  ErrorMessage: próba nadpisania 
/usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który istnieje także w 
pakiecie nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  InstallationDate: Installed on 2014-05-15 (379 days ago)
  InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 
(20140204)
  SourcePackage: nvidia-graphics-drivers-331
  Title: package nvidia-opencl-icd-331 (not installed) failed to 
install/upgrade: próba nadpisania 
/usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113, który istnieje także w 
pakiecie nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  UpgradeStatus: Upgraded to trusty on 2015-05-05 (23 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1460155/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1451944] Re: Gnome-terminal in Ubuntu Unity shrinks to minimum size

2015-05-29 Thread Mikael Göransson

I can confirm that I see the same behaviour (100% reproducible when
creating new tabs)  when using the zukimac theme.

$ sudo dpkg-query --show compiz unity zukimac-gtk-themes
compiz  1:0.9.12.1+15.04.20150410.1-0ubuntu1
unity   7.3.2+15.04.20150420-0ubuntu1
zukimac-gtk-themes  1.5

Changing to the standard Ambiance theme and gnome-terminal behaves as
expected.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/1451944

Title:
  Gnome-terminal in Ubuntu Unity shrinks to minimum size

Status in GNOME Terminal:
  Confirmed
Status in gnome-terminal package in Ubuntu:
  Confirmed

Bug description:
  When I open a terminal in Ubuntu 15.04, it shrinks to 1 character by 1
  character. I can use the corner resizer to make the window bigger, but
  it immediately shrinks to 1x1. There are a few x,y combinations that
  allow the window to stay at the desired size, but if you're off by a
  pixel, the window shrinks to 1x1.

  There is another question (http://askubuntu.com/questions/423733
  /gnome-terminal-in-kubuntu-shrinks-to-minimum-size), Gnome-terminal in
  Kubuntu shrinks to minimum size, that is basically the same thing, but
  in KDE. I tried to follow the instructions:

  In KDE, go to System Settings. Return to the overview if you are
  not already there. In the Workspace Appearance and Behavior section,
  click Window Behavior. In the area to the left, click the Window Rules
  icon.

  but, there is no Workspace Appearance and Behavior section. I couldn't
  find a similar setting in ccsm, gnome-tweak-tool or unity-tweak-tool.

  % dpkg-query --show compiz
  compiz1:0.9.12.1+15.04.20150410.1-0ubuntu1
  % dpkg-query --show unity
  unity 7.3.2+15.04.20150420-0ubuntu1

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: gnome-terminal 3.14.2-0ubuntu3
  ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3
  Uname: Linux 3.19.0-16-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Tue May  5 09:59:55 2015
  ExecutablePath: /usr/lib/gnome-terminal/gnome-terminal-server
  InstallationDate: Installed on 2013-05-02 (732 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  SourcePackage: gnome-terminal
  UpgradeStatus: Upgraded to vivid on 2015-04-26 (8 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-terminal/+bug/1451944/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1201528] Re: [INTEL DP55WG, Realtek ALC889] - Audio Playback Unavailable

2015-05-29 Thread Natalia Bidart

Audio BREAKS with 3.8.0-030800rc1-generic, attaching verbose log for
pulseaudio

** Attachment added: pulseverbose-3.8.0-030800rc1-generic.log.gz
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1201528/+attachment/4406781/+files/pulseverbose-3.8.0-030800rc1-generic.log.gz

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1201528

Title:
  [INTEL DP55WG,Realtek ALC889] - Audio Playback Unavailable

Status in alsa-driver package in Ubuntu:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in alsa-driver source package in Vivid:
  Confirmed
Status in linux source package in Vivid:
  Confirmed

Bug description:
  This is a fresh upgrade to raring. During the weekend, I updated from
  precise to quantal, and from there to raring. I did not use sound
  while the system was in quantal, so no idea if the bug was present
  there as well.

  The symptom is:

  * after some period of sound usage, playback stops working

  What I mean with sound usage is:

  I tried having a meeting with: mumble, skype, and google hangout, and
  in all three cases, audio input/outout will work just fine for ~5
  minutes, and the playback just dies (people tell me they keep
  listening to me, so mic works fine).

  The only way to solve this is by rebooting. After one of the reboots,
  I was able to play a 20 minute video with mplayer with no further
  issue. Then opened skype and after ~3-5 minute talk, audio playback
  died again.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
  Uname: Linux 3.8.0-26-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nessita2627 F pulseaudio
  Date: Mon Jul 15 14:40:20 2013
  InstallationDate: Installed on 2011-12-20 (572 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha amd64 
(2029.1)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:MID failed
  Symptom_AlsaPlaybackTestStderr:
   W r i t e   e r r o r :   - 5 , I n p u t / o u t p u t   e r r o r 
x r u n _ r e c o v e r y   f a i l e d :   - 5 , I n p u t / o u t p u t   
e r r o r 
T r a n s f e r   f a i l e d :   O p e r a t i o n   n o t   p e r m i t t 
e d
  Symptom_Card: Built-in Audio - HDA Intel MID
  Symptom_Jack: Green Headphone Out, Front
  Symptom_Type: None of the above
  Title: [, Realtek ALC889, Green Headphone Out, Front] Playback problem
  UpgradeStatus: Upgraded to raring on 2013-07-13 (2 days ago)
  dmi.bios.date: 08/05/2009
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: KGIBX10J.86A.3206.2009.0805.1855
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: DP55WG
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAE57269-404
  dmi.chassis.type: 2
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrKGIBX10J.86A.3206.2009.0805.1855:bd08/05/2009:svn:pn:pvr:rvnIntelCorporation:rnDP55WG:rvrAAE57269-404:cvn:ct2:cvr:
  --- 
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nessita   13188 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.04
  HibernationDevice: RESUME=UUID=bd987ac2-eb4b-43e7-881b-4cf2b5078e4b
  InstallationDate: Installed on 2014-05-11 (366 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  Package: linux (not installed)
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-16-generic 
root=UUID=e91bd3a4-787b-404b-9f19-aa6dcbe707b0 ro quiet splash
  ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-16-generic N/A
   linux-backports-modules-3.19.0-16-generic  N/A
   linux-firmware 1.143
  RfKill:
   
  Tags:  vivid vivid vivid vivid
  Uname: Linux 3.19.0-16-generic x86_64
  UpgradeStatus: Upgraded to vivid on 2015-03-11 (61 days ago)
  UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 08/05/2009
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: KGIBX10J.86A.3206.2009.0805.1855
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: DP55WG
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAE57269-404
  dmi.chassis.type: 2
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrKGIBX10J.86A.3206.2009.0805.1855:bd08/05/2009:svn:pn:pvr:rvnIntelCorporation:rnDP55WG:rvrAAE57269-404:cvn:ct2:cvr:

To manage notifications about this bug go to:

[Desktop-packages] [Bug 744033] Re: Xorg crashed with SIGABRT

2015-05-29 Thread Eloy Vallina

Same problem still in Ubuntu 14.04 64b

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/744033

Title:
  Xorg crashed with SIGABRT

Status in xorg-server package in Ubuntu:
  Confirmed

Bug description:
  I had opened 'R' from gnome-terminal (R is a scripting language for 
statistical computing) and typed:
  install.packages('ncdf4', dependencies = TRUE)
  I should have had a little Tcl/Tk interface pop-up asking which server I 
would like to get the package from, instead I was greeted with this glorious 
crash.

  ProblemType: Crash
  DistroRelease: Ubuntu 11.04
  Package: xserver-xorg-core 2:1.10.0-0ubuntu2
  ProcVersionSignature: Ubuntu 2.6.38-7.39-generic 2.6.38
  Uname: Linux 2.6.38-7-generic x86_64
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  DRM.card0.DP.1:
   status: disconnected
   enabled: disabled
   dpms: Off
   modes: 
   edid-base64:
  DRM.card0.HDMI.A.1:
   status: disconnected
   enabled: disabled
   dpms: Off
   modes: 
   edid-base64:
  DRM.card0.LVDS.1:
   status: connected
   enabled: enabled
   dpms: On
   modes: 1280x800 1280x800
   edid-base64: 
AP///wAwrhFTAQOAGhB46lzVk1xejiccUFQBAQEBAQEBAQEBAQEBAQEB7hoAgFAgEDAQMBMABaMQAAAZ0BcAxlAgGTAwIDYABaMQAAAZDwCBCjyBCjIWCQBMo0FU/gBMVE4xMjFBVDA3TDAyADg=
  DRM.card0.VGA.1:
   status: connected
   enabled: enabled
   dpms: On
   modes: 1920x1080 1600x1200 1680x1050 1280x1024 1280x1024 1440x900 1440x900 
1152x864 1024x768 1024x768 1024x768 800x600 800x600 800x600 800x600 640x480 
640x480 640x480 720x400
   edid-base64: 
AP///wAEcnQAvBuAARIUAQNoNR146mCFplZKnCUSUFSvzwCBgHFPlQCVD6lAswABAQEBGjaAoHA4H0AwIDUAEyohAAAa/ABIMjQzSAogICAgICAg/QA4TB9TEgAKICAgICAg/wBMRVcwQzAwNDQwMDIKALQ=
  Date: Sun Mar 27 22:01:43 2011
  Disassembly: = 0x7ffb4235bd05:   Cannot access memory at address 
0x7ffb4235bd05
  DistUpgraded: Log time: 2011-02-19 23:24:43.082313
  DistroCodename: natty
  DistroVariant: ubuntu
  ExecutablePath: /usr/bin/Xorg
  GraphicsCard:
   Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] 
(rev 02) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:215a]
  InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007)
  Lsusb:
   Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
   Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 001 Device 003: ID 17ef:4816 Lenovo 
   Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 3249CTO
  ProcCmdline: /usr/bin/X :0 -nr -verbose -auth 
/var/run/gdm/auth-for-gdm-X0aNDM/database -nolisten tcp vt7
  ProcEnviron:
   LANG=en_US.UTF-8
   PATH=(custom, no user)
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-7-generic 
root=UUID=6bf00bbe-38d4-4202-a6fc-67c023b70ac0 ro quiet splash vt.handoff=7
  ProcKernelCmdLine_: BOOT_IMAGE=/boot/vmlinuz-2.6.38-7-generic 
root=UUID=6bf00bbe-38d4-4202-a6fc-67c023b70ac0 ro quiet splash vt.handoff=7
  Renderer: Unknown
  Signal: 6
  SourcePackage: xorg-server
  Stacktrace:
   #0  0x7ffb4235bd05 in ?? ()
   No symbol table info available.
   Cannot access memory at address 0x7fffe009da88
  StacktraceTop: ?? ()
  ThreadStacktrace:
   .
   Thread 1 (Thread 1062):
   #0  0x7ffb4235bd05 in ?? ()
   No symbol table info available.
   Cannot access memory at address 0x7fffe009da88
  Title: Xorg crashed with SIGABRT
  UpgradeStatus: Upgraded to natty on 2011-03-24 (3 days ago)
  UserGroups:
   
  dmi.bios.date: 09/15/2010
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 6QET53WW (1.23 )
  dmi.board.name: 3249CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr6QET53WW(1.23):bd09/15/2010:svnLENOVO:pn3249CTO:pvrThinkPadX201:rvnLENOVO:rn3249CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3249CTO
  dmi.product.version: ThinkPad X201
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.4git20110322-0ubuntu5
  version.libdrm2: libdrm2 2.4.23-1ubuntu5
  version.libgl1-mesa-glx: libgl1-mesa-glx 7.10.1-0ubuntu3
  version.xserver-xorg: xserver-xorg 1:7.6~3ubuntu11
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.0-0ubuntu4
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.14.0-4ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20110107+b795ca6e-0ubuntu6

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/744033/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to :

[Desktop-packages] [Bug 1284308] Re: Can't copy files from a bluetooth device: Another operation in progress

2015-05-29 Thread wodny

I would like to propose a patch (attached). It's probably too primitive and 
requires a rewrite to become event-driven instead of a polling mechanism. But 
for me it works and I've found another polling part in the code that was 
already there so maybe the quality loss isn't that big after all ;) 
I kindly ask for a review/opinions and feedback. 

** Patch added: A very primitive patch/workaround
   
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1284308/+attachment/4406830/+files/gvfs-760847.patch

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/1284308

Title:
  Can't copy files from a bluetooth device: Another operation in
  progress

Status in GVFS:
  Expired
Status in gvfs package in Ubuntu:
  Triaged

Bug description:
  1)  lsb_release -rd
  Description:  Ubuntu 14.04.1 LTS
  Release:  14.04

  2) apt-cache policy gvfs
  gvfs:
    Installed: 1.20.1-1ubuntu1
    Candidate: 1.20.1-1ubuntu1
    Version table:
   *** 1.20.1-1ubuntu1 0
  500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages
  100 /var/lib/dpkg/status

  3) What is expected to happen is when one pairs their bluetooth phone,
  browses it, and attempt to copy a file from the phone to Ubuntu, it
  does so successfully.

  4) What happens instead is a window pops up noting:
  Error while copying “example.txt”.
  There was an error copying the file into /home/test/
  Show more details
  Another operation in progress

  Originally reproduced in 13.10.

  /usr/lib/gvfs/gvfsd-obexftp 'host=[XX:XX:XX:XX:XX:XX]'
  ** Message: transfer of example.txt to /tmp/gvfsobexftp-tmp-NTNMQX started
  ** Message: filename: /Internal storage/Download/example.txt (example.txt) 
copying to /tmp/gvfsobexftp-tmp-NTNMQX (retval 2)
  ** Message: ChangeCurrentFolderToRoot failed
  ** Message: transfer got cancelled
  ** Message: ChangeCurrentFolderToRoot failed

  WORKAROUND: Connect phone via USB cord to transfer files from the
  phone to Ubuntu.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: bluetooth (not installed)
  ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3
  Uname: Linux 3.11.0-17-generic x86_64
  ApportVersion: 2.12.5-0ubuntu2.2
  Architecture: amd64
  Date: Mon Feb 24 21:24:05 2014
  InstallationDate: Installed on 2013-10-11 (136 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  InterestingModules: bnep rfcomm btusb bluetooth
  MachineType: Acer Aspire V3-571G
  MarkForUpload: True
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic 
root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7
  SourcePackage: bluez
  UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago)
  dmi.bios.date: 10/15/2012
  dmi.bios.vendor: Acer
  dmi.bios.version: V2.07
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: VA50_HC_CR
  dmi.board.vendor: Acer
  dmi.board.version: Type2 - Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V2.07
  dmi.modalias: 
dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07:
  dmi.product.name: Aspire V3-571G
  dmi.product.version: V2.07
  dmi.sys.vendor: Acer
  hciconfig:
   hci0:Type: BR/EDR  Bus: USB
    BD Address: A4:17:31:0D:4A:70  ACL MTU: 1022:8  SCO MTU: 183:5
    UP RUNNING PSCAN ISCAN
    RX bytes:44318 acl:198 sco:0 events:355 errors:0
    TX bytes:6132 acl:178 sco:0 commands:82 errors:0

To manage notifications about this bug go to:
https://bugs.launchpad.net/gvfs/+bug/1284308/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1363070] Re: USB Mouse cursor jumps and buttons get deactivated with two PS/2 devices connected

2015-05-29 Thread Christopher M. Penalver

** Tags removed: xmodmap
** Tags added: needs-apport-collect

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1363070

Title:
  USB Mouse cursor jumps and buttons get deactivated with two PS/2
  devices connected

Status in xorg package in Ubuntu:
  Expired

Bug description:
  This happens when two PS/2 devices are connected at the same time and a USB 
mouse is primarily used (eg using a Laptop with a PS/2 touchpad with an 
external USB mouse)
  Symptoms: after a while (can be 10 minutes or 1 hour) the mouse cursor starts 
randomly to jump (mostly down) and up and then the mouse buttons get 
deactivated (clicking does not have any effect). In that case, moving the mouse 
marks the underlying text (thus imitating a continuous left-click). This 
malbehaviour can be temporarily stopped when shortly using one PS/2 device. 
After a while the same symptoms reappear.

  Setup:
  Dell D430 docked to a Dell D/dock PD01x. The second PS/2 device is an 
(switched off) Logitech TrackMan Live! (infrared mouse connected via a PS/2 
receiver). 
  This bug appears under 12.04 LTS Unity and 14.04 with Xfce, KDE or Unity 
(always using the latest kernels). Using KDE the bug appears more often than 
when using XFCE.

  To resolve the issue:
  disconnect the external Trackman Live PS/2 device from the docking station.

  This bug drove me crazy. Only by accident I disconnected the Trackman
  and since then my USB mouse works well again. I verified that the bug
  reappears as soon as I connect the TrackMan again and I used different
  USB mice (as I thought that it might be a USB problem). It did not
  happen under Windows, so it is not hardware related.

  If this bug is going to be followed up I can test with a normal PS/2
  mouse (instead of the TrackMan Live) if the same bug happens or would
  be happy to provide logging data.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1363070/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1355554] Re: Most Rhythmbox keyboard shortcuts do not work in ver. 3.0

2015-05-29 Thread Luis González

I realized what's going on. Some keyboards shortcuts have changed in
version 3.0, but Rhythnbox's menus still show the old ones.

The new keyboard shortcuts are these :
Play/Pause - Ctrl+p
Previews - Ctrl+Left
Next - Ctrl+Left

This bug seems to be  still present in Rhythmbox 3.2.1

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to rhythmbox in Ubuntu.
https://bugs.launchpad.net/bugs/134

Title:
  Most Rhythmbox keyboard shortcuts do not work in ver. 3.0

Status in rhythmbox package in Ubuntu:
  Confirmed

Bug description:
  Steps to Reproduce:
  1. Open Rhythmbox
  2. Press Ctrl+space, Alt+left or Alt+right

  Actual results:
  Pressing the avobe keyboard shortcuts has no effect

  Expected results:
  Ctrl+space should play/pause the music playback; Alt+left and Alt+right 
should go to te previows and next track, respectively.

  I've tried this on various Ubuntu 14.04 installations, including a
  fresh one.

  I'm using rhythmbox 3.0.2. I guess it's related to version 3.0,
  because this doesn't happen using Ubuntu 12.04, which includes version
  2.96.

  Other convinations like ctrl+up/down to increase and decrease the
  playback volume do work; and if I press ctrl+P it plays/pauses
  (altough the convination should be ctrl+space).

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: rhythmbox 3.0.2-0ubuntu2
  ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
  Uname: Linux 3.13.0-32-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Aug 11 21:03:44 2014
  InstallationDate: Installed on 2014-07-03 (39 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  SourcePackage: rhythmbox
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/134/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1351699] Re: Additional Drivers / Driver Manager shows no drivers for NVidia GTX 750ti - Missing modalias in nvidia-331.

2015-05-29 Thread Marcelo Siqueira

** Changed in: nvidia-graphics-drivers-331 (Ubuntu)
 Assignee: (unassigned) = Marcelo Siqueira (marcelosiqueirafisico)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ubuntu-drivers-common in Ubuntu.
https://bugs.launchpad.net/bugs/1351699

Title:
  Additional Drivers / Driver Manager shows no drivers for NVidia GTX
  750ti - Missing modalias in nvidia-331.

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  Confirmed
Status in nvidia-graphics-drivers-331-updates package in Ubuntu:
  Confirmed
Status in ubuntu-drivers-common package in Ubuntu:
  Confirmed

Bug description:
  I'm on Ubuntu 14.04 (Trusty), up to date, on a computer with an NVidia
  GTX 750ti graphics card. I also tested on Utopic with a live daily dvd
  and the problem persists.

  The list under Additional Drivers is empty for my NVidia GTX 750ti video card:
  Also, running:
  ubuntu-drivers list
  or
  ubuntu-drivers devices
  produces an empty output.

  Running:
  software-properties-gtk --open-tab=4
  or
  kcmshell4 kcm_driver_manager
  shows no drivers found (not even the open source driver). I'll attach a 
screenshot here to show this.

  I had to workaround by installing the nvidia-331-updates package
  manually by console, which works very well for my video card. Though I
  worry about people not so familiar with the console.

  The empty list happens because the ubuntu-drivers command insists on making 
a perfect VID:PID match with each driver, and also because the specific 
modalias for making that match, is missing from nvidia-331 deb package. 
  The corresponding modalias for my NVidia 750ti is (as obtained from running 
ubuntu-drivers debug):
  
   pci:v10DEd1380sv1458sd362Dbc03sc00i00

  Which means that this should be included in the driver package
  description for my card to be matched by the Additional Drivers
  backend:

pci:v10DEd1380sv*sd*bc03sc*i*

  wich is currently missing from the Modaliases list in the description
  of the .DEB nvidia packages. That is the modalias required to make a
  match for the 750ti card.

  
  There are two possible solutions:
  -
A) Please ask the maintainer(s) of nvidia packages to add that modalias 
to the DEB package of nvidia-331 and nvidia-331-updates packages 

B) OR Please ask the developers of ubuntu-drivers-common
  package to match nvidia drivers by VID instead of insisting that the
  VID and PID both match perfectly. A lot of cards are left without
  drivers that way (not even noveau is matching my card currently).

  
  Important Details
  

  If I look at the current list of modaliases in the nvidia drivers, by
  running:

  apt-cache show 'nvidia*' | grep -i modaliases

  I cannot find my NVidia 750ti, which has a VID equal to 10DE, and a PID equal 
to 1380. I should be able to find the string v10DEd1380. 
  This causes the detection routine in ubuntu-drivers-common, to never match 
a driver (I found that routine is at 
/usr/lib/python3/dist-packages/UbuntuDrivers/detect.py), because the product id 
code for my 750ti is missing from all the drivers, and because 
ubuntu-drivers-common started to require a perfect match (both vendor id and 
product id). The routine is called: packages_for_modalias().

  There is a very big list of nvidia cards that COULD be affected by the
  same problem (empty AdditionalDrivers), not just my 750ti. This can be
  verified by looking at all the product ids for nvidia cards, and
  comparing to the modaliases present in the nvidia drivers packages:

  The PCI ID Repository
  http://pci-ids.ucw.cz/read/PC/10de

  and looking at the current full list of modaliases with:
apt-cache show 'nvidia*' | grep -i modaliases

  For instance, the NVidia 780ti and NVidia 780 are both missing too:

apt-cache show 'nvidia*' | grep Modaliases | grep d1007
apt-cache show 'nvidia*' | grep Modaliases | grep d1008

  (produces empty results)

  Though a NVidia GT 610 that I have in an old computer of mine, can
  be found, and does show a list in Additional Drivers:

   apt-cache show 'nvidia*' | grep Modaliases | grep d104A

  (shows a long modalias line matching for nvidia-304 and nvidia-331
  packages for the old GT 610).

  
  Please make Additional Drivers selector work for my NVidia GTX 750ti video 
card.
  FYI: This video card was released by nvidia in february 2014.

  Your help will be appreciated!

  Cordially,
  Juan Manuel Cabo

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: ubuntu-drivers-common 1:0.2.91.5
  ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
  Uname: Linux 3.13.0-32-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.2
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Sat Aug

[Desktop-packages] [Bug 1455874] Re: Xorg freeze

2015-05-29 Thread Christopher M. Penalver

Rudolf Göldner, just to clarify, if you do a reinstall and do not copy
any of the fstab entires, is this still reproducible?

** Tags removed: bios-outdated-0327
** Tags added: latest-bios-0327

** Changed in: xorg (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1455874

Title:
  Xorg freeze

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Installation of 15.04 in addition to 14.10 ok.
  Start by BIOS start menue ok.
  All worked fine.

  Then I wanted to add some lines to the fstab to mount ntfs partitions. I 
copied these lines from the kubuntu 14.10 fstab.
  Since then, kde shows the animated splash screen when loading and then a 
black screen with no more action possible.
  Only Control+Alt+F1 works and shows the tty screen.

  I deleted the additional lines in the fstab, but there is no change in
  behaviour.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3
  Uname: Linux 3.19.0-16-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  Date: Sun May 17 10:58:05 2015
  InstallationDate: Installed on 2015-05-15 (1 days ago)
  InstallationMedia: Kubuntu 15.04 Vivid Vervet - Release amd64 (20150422)
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: xorg
  Symptom: display
  Title: Xorg freeze
  UpgradeStatus: No upgrade log present (probably fresh install)
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CasperVersion: 1.345
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   NVIDIA Corporation GK104 [GeForce GTX 760] [10de:1187] (rev a1) (prog-if 00 
[VGA controller])
 Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:2847]
  LiveMediaBuild: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper 
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.16.0-23.31-generic 3.16.4
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-23-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/22/2014
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: RLH8710H.86A.0324.2014.0122.1611
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: DH87RL
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAG74240-403
  dmi.chassis.type: 3
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrRLH8710H.86A.0324.2014.0122.1611:bd01/22/2014:svn:pn:pvr:rvnIntelCorporation:rnDH87RL:rvrAAG74240-403:cvn:ct3:cvr:
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Wed May 27 13:03:13 2015
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputLogitech Unifying Device. Wireless PID:101a MOUSE, id 8
   inputLogitech Logitech USB Keyboard KEYBOARD, id 9
  xserver.errors:
   Failed to load module nvidia (module does not exist, 0)
   Failed to load module nvidia (module does not exist, 0)
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1
  xserver.video_driver: nouveau

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1455874/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460080] Re: HP laserjet 1018 no longer works

2015-05-29 Thread Till Kamppeter

Which is the HPLIP which you have actually installed? Is it the 3.15.2
which is part of Ubuntu 15.04 or did you install an HPLIP directly from
HP's site (3.15.4)? I ask because you get

Make and Model: HP LaserJet 1018, hpcups 3.15.4, requires proprietary
plugin

but the automatically added info in this bug report reads:

Package: hplip 3.15.2-0ubuntu4.1

Note that your Ubuntu package of HPLIP (3.15.2-0ubuntu4.1) has bug
1422004 fixed. The version from HP does not necessarily contain this
fix.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to hplip in Ubuntu.
https://bugs.launchpad.net/bugs/1460080

Title:
  HP laserjet 1018 no longer works

Status in HP Linux Imaging and Printing:
  Incomplete
Status in hplip package in Ubuntu:
  Incomplete

Bug description:
  My first experience of Ubuntu was Utopic Unicorn, about 2 months ago. I 
installed HPLIP, so as to use my HP Laserjet 1018 printer, and it all worked 
fine. On upgrading to Ubuntu 15.04, my printer stopped working. I have tried 
everything I can think of: upgrading HPLIP, removing HPLIP and installing an 
alternative driver (foomatic), deleting and adding the printer, nothing works. 
I have also downloaded and installed all updates to Ubuntu. I have noticed, 
checking through previous bug reports, that this appears to be a recurring 
problem: people's HP printers work OK until, on upgrading Ubuntu, they suddenly 
stopped working. Can it be that beta versions are not being properly tested? 
Having spent most of yesterday on this problem, and having being seriously 
ticked off by my boss, about it, I am unwilling to spend further time on it. I 
was going to include some screens shots to support my case, but I can't see how 
to do this. Here are some more details:
  As of now:
  listed printers are: Canon ip1900 series
 HP Laserjet 1018 (default) / Enabled -- 
OK / Shared -- OK
 
Description: Hewlett-Packard HP LaserJet 1018
 
Location: tristram-Aspire-5570Z
 Device 
URI: usb://HP/LaserJet%201018?serial=LF04EKT
 Make 
and Model: HP LaserJet 1018 Foomatic/foo2zjs-z1 (recommended)
 
Printer state: Idle - Sending data to printer.

  Trying to print a test page produces a little box that says: Submitted - 
Test page submitted as job (whatever)
  Noticing that, above, the driver appears to be set to Foomatic, I tried 
changing it. Now it reads:
 Make 
and Model: HP LaserJet 1018, hpcups 3.15.4, requires proprietary plugin

  I pressed the Print Test Page button, and got:  Submitted - Test page 
submitted as job 64. As usual, nothing happens.
  All this time, the printer is turned on, and connected to my laptop via USB 
cable, needless to say. On viewing Document print status I have: Job: 64 /User: 
tristram /Document: Test Page / Printer: Hewlett-Packard-HP-LaserJet-1018 / 
Size: 1k /Time submitted: 11 minutes ago / Status (printer appears with a red 
sign) : Stopped - Printer error
  On viewing job attributes, I have (for instance, a screen shot would be 
really useful here):
  job-more-info: http://localhost:631/jobs/64 (...)
  job-printer-state-message: Filter failed
  job-printer-state-reasons: ['hplip.plugin-error'] (...)
  job-state-reasons: job-completed-with-errors  (...)

  There's more info in this report, but I don't know what you need...

  I hope this is enough for you people to work on. Meanwhile, I'm
  seriously thinking of downgrading my Ubuntu version to what it was
  before, and HPLIP also, except that I don't know for sure what the
  working version was

  Thank you very much,

  Tristram

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: hplip 3.15.2-0ubuntu4.1
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic i686
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: i386
  CupsErrorLog:
   E [29/May/2015:09:53:50 -0300] [cups-deviced] PID 12270 (hpfax) stopped with 
status 1!
   E [29/May/2015:09:54:39 -0300] [cups-deviced] PID 12722 (hpfax) stopped with 
status 1!
   W [29/May/2015:09:55:28 -0300] CreateProfile failed: 
org.freedesktop.ColorManager.AlreadyExists:profile id 
'Hewlett-Packard-HP-LaserJet-1018-Gray..' already exists
  CurrentDesktop: Unity
  Date: Fri May 29 10:00:31 2015
  InstallationDate: Installed on 2015-01-15 (134 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release i386 (20141022.1)
  Lpstat:
   device for Canon-iP1900-series: usb://Canon/iP1900%20series?serial=C6EDE8
   device for Hewlett-Packard-HP-LaserJet-1018:

[Desktop-packages] [Bug 1460249] [NEW] package modemmanager 1.4.8-1 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código de salida de error 100

2015-05-29 Thread Jake McGregor

Public bug reported:

I was attempting to upgrade to Wily, and this package stalled the
upgrade. Everything else appears to have installed/upgraded fine.

ProblemType: Package
DistroRelease: Ubuntu 15.10
Package: modemmanager 1.4.8-1
ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
Uname: Linux 3.19.0-18-generic x86_64
ApportVersion: 2.17.3-0ubuntu3
Architecture: amd64
Date: Fri May 29 22:14:52 2015
DuplicateSignature: package:modemmanager:1.4.8-1:el subproceso instalado el 
script post-installation devolvió el código de salida de error 100
ErrorMessage: el subproceso instalado el script post-installation devolvió el 
código de salida de error 100
InstallationDate: Installed on 2015-05-10 (19 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2)
RelatedPackageVersions:
 dpkg 1.17.25ubuntu1
 apt  1.0.9.10ubuntu1
SourcePackage: modemmanager
Title: package modemmanager 1.4.8-1 failed to install/upgrade: el subproceso 
instalado el script post-installation devolvió el código de salida de error 100
UpgradeStatus: Upgraded to wily on 2015-05-30 (0 days ago)

** Affects: modemmanager (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package dist-upgrade wily

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to modemmanager in Ubuntu.
https://bugs.launchpad.net/bugs/1460249

Title:
  package modemmanager 1.4.8-1 failed to install/upgrade: el subproceso
  instalado el script post-installation devolvió el código de salida de
  error 100

Status in modemmanager package in Ubuntu:
  New

Bug description:
  I was attempting to upgrade to Wily, and this package stalled the
  upgrade. Everything else appears to have installed/upgraded fine.

  ProblemType: Package
  DistroRelease: Ubuntu 15.10
  Package: modemmanager 1.4.8-1
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.3-0ubuntu3
  Architecture: amd64
  Date: Fri May 29 22:14:52 2015
  DuplicateSignature: package:modemmanager:1.4.8-1:el subproceso instalado el 
script post-installation devolvió el código de salida de error 100
  ErrorMessage: el subproceso instalado el script post-installation devolvió el 
código de salida de error 100
  InstallationDate: Installed on 2015-05-10 (19 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
  RelatedPackageVersions:
   dpkg 1.17.25ubuntu1
   apt  1.0.9.10ubuntu1
  SourcePackage: modemmanager
  Title: package modemmanager 1.4.8-1 failed to install/upgrade: el subproceso 
instalado el script post-installation devolvió el código de salida de error 100
  UpgradeStatus: Upgraded to wily on 2015-05-30 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/modemmanager/+bug/1460249/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1412520] Re: eog crashed with SIGABRT in __assert_fail_base()

2015-05-29 Thread JC

*** This bug is a duplicate of bug 1303855 ***
https://bugs.launchpad.net/bugs/1303855

I believe to be affected by this bug as well but it is duplicated to a private 
bug. How can I be notified of the status / work around?
Here's what I get when running eog on a specific image. It is consistently 
reproducible.

$ eog /media/vm/SharedFolder/DSC_0036_LR.jpg 
eog: /build/buildd/cairo-1.13.0~20140204/src/cairo-xlib-surface-shm.c:619: 
_cairo_xlib_shm_pool_create: Assertion `*ptr != ((void *)0)' failed.
Aborted (core dumped)

Description:Ubuntu 14.04.2 LTS
Gnome Image Viewer v3.10.2

Opening of the same image with gimp works fine.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to eog in Ubuntu.
https://bugs.launchpad.net/bugs/1412520

Title:
  eog crashed with SIGABRT in __assert_fail_base()

Status in eog package in Ubuntu:
  Confirmed

Bug description:
  .

  ProblemType: Crash
  DistroRelease: Ubuntu 14.04
  Package: eog 3.10.2-0ubuntu5
  ProcVersionSignature: Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12
  Uname: Linux 3.13.0-44-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Jan 19 18:15:18 2015
  ExecutablePath: /usr/bin/eog
  InstallationDate: Installed on 2014-04-10 (284 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Daily amd64 (20140410)
  ProcCmdline: eog 
/home/username/.cache/.fr-WKeUO3/gLhgLhgLhgLhgLhe.p/BK/0005.jpg
  Signal: 6
  SourcePackage: eog
  StacktraceTop:
   __assert_fail_base (fmt=0x7f9ab98993d0 %s%s%s:%u: %s%sAssertion `%s' 
failed.\n%n, assertion=assertion@entry=0x7f9abad3516c *ptr != ((void *)0), 
file=file@entry=0x7f9abad35100 
/build/buildd/cairo-1.13.0~20140204/src/cairo-xlib-surface-shm.c, 
line=line@entry=619, function=function@entry=0x7f9abad352b0 
_cairo_xlib_shm_pool_create) at assert.c:92
   __GI___assert_fail (assertion=0x7f9abad3516c *ptr != ((void *)0), 
file=0x7f9abad35100 
/build/buildd/cairo-1.13.0~20140204/src/cairo-xlib-surface-shm.c, line=619, 
function=0x7f9abad352b0 _cairo_xlib_shm_pool_create) at assert.c:101
   ?? () from /usr/lib/x86_64-linux-gnu/libcairo.so.2
   ?? () from /usr/lib/x86_64-linux-gnu/libcairo.so.2
   ?? () from /usr/lib/x86_64-linux-gnu/libcairo.so.2
  Title: eog crashed with SIGABRT in __assert_fail_base()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dialout dip disk lpadmin plugdev sambashare sudo 
vboxusers wireshark

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/eog/+bug/1412520/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1412520] Re: eog crashed with SIGABRT in __assert_fail_base()

*** This bug is a duplicate of bug 1303855 ***
https://bugs.launchpad.net/bugs/1303855

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: eog (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to eog in Ubuntu.
https://bugs.launchpad.net/bugs/1412520

Title:
  eog crashed with SIGABRT in __assert_fail_base()

Status in eog package in Ubuntu:
  Confirmed

Bug description:
  .

  ProblemType: Crash
  DistroRelease: Ubuntu 14.04
  Package: eog 3.10.2-0ubuntu5
  ProcVersionSignature: Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12
  Uname: Linux 3.13.0-44-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Jan 19 18:15:18 2015
  ExecutablePath: /usr/bin/eog
  InstallationDate: Installed on 2014-04-10 (284 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Daily amd64 (20140410)
  ProcCmdline: eog 
/home/username/.cache/.fr-WKeUO3/gLhgLhgLhgLhgLhe.p/BK/0005.jpg
  Signal: 6
  SourcePackage: eog
  StacktraceTop:
   __assert_fail_base (fmt=0x7f9ab98993d0 %s%s%s:%u: %s%sAssertion `%s' 
failed.\n%n, assertion=assertion@entry=0x7f9abad3516c *ptr != ((void *)0), 
file=file@entry=0x7f9abad35100 
/build/buildd/cairo-1.13.0~20140204/src/cairo-xlib-surface-shm.c, 
line=line@entry=619, function=function@entry=0x7f9abad352b0 
_cairo_xlib_shm_pool_create) at assert.c:92
   __GI___assert_fail (assertion=0x7f9abad3516c *ptr != ((void *)0), 
file=0x7f9abad35100 
/build/buildd/cairo-1.13.0~20140204/src/cairo-xlib-surface-shm.c, line=619, 
function=0x7f9abad352b0 _cairo_xlib_shm_pool_create) at assert.c:101
   ?? () from /usr/lib/x86_64-linux-gnu/libcairo.so.2
   ?? () from /usr/lib/x86_64-linux-gnu/libcairo.so.2
   ?? () from /usr/lib/x86_64-linux-gnu/libcairo.so.2
  Title: eog crashed with SIGABRT in __assert_fail_base()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dialout dip disk lpadmin plugdev sambashare sudo 
vboxusers wireshark

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/eog/+bug/1412520/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460249] Re: package modemmanager 1.4.8-1 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código de salida de error 100

2015-05-29 Thread Apport retracing service

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to modemmanager in Ubuntu.
https://bugs.launchpad.net/bugs/1460249

Title:
  package modemmanager 1.4.8-1 failed to install/upgrade: el subproceso
  instalado el script post-installation devolvió el código de salida de
  error 100

Status in modemmanager package in Ubuntu:
  New

Bug description:
  I was attempting to upgrade to Wily, and this package stalled the
  upgrade. Everything else appears to have installed/upgraded fine.

  ProblemType: Package
  DistroRelease: Ubuntu 15.10
  Package: modemmanager 1.4.8-1
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.3-0ubuntu3
  Architecture: amd64
  Date: Fri May 29 22:14:52 2015
  DuplicateSignature: package:modemmanager:1.4.8-1:el subproceso instalado el 
script post-installation devolvió el código de salida de error 100
  ErrorMessage: el subproceso instalado el script post-installation devolvió el 
código de salida de error 100
  InstallationDate: Installed on 2015-05-10 (19 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
  RelatedPackageVersions:
   dpkg 1.17.25ubuntu1
   apt  1.0.9.10ubuntu1
  SourcePackage: modemmanager
  Title: package modemmanager 1.4.8-1 failed to install/upgrade: el subproceso 
instalado el script post-installation devolvió el código de salida de error 100
  UpgradeStatus: Upgraded to wily on 2015-05-30 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/modemmanager/+bug/1460249/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1416169] Re: Ubuntu 15.04/14.10/14.04[drm:i915_stolen_to_physical] ERROR conflict detected with stolen region

[Expired for xserver-xorg-video-intel (Ubuntu) because there has been no
activity for 60 days.]

** Changed in: xserver-xorg-video-intel (Ubuntu)
   Status: Incomplete = Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1416169

Title:
  Ubuntu 15.04/14.10/14.04[drm:i915_stolen_to_physical] *ERROR* conflict
  detected with stolen region

Status in xserver-xorg-video-intel package in Ubuntu:
  Expired

Bug description:
  açılışta sorun yaşıyorum. teşekkürler :)

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: xorg 1:7.7+7ubuntu2
  ProcVersionSignature: Ubuntu 3.16.0-29.39-generic 3.16.7-ckt2
  Uname: Linux 3.16.0-29-generic x86_64
  .tmp.unity.support.test.0:

  ApportVersion: 2.14.7-0ubuntu8.1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Fri Jan 30 01:54:07 2015
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroVariant: ubuntu
  GraphicsCard:
   Intel Corporation 4 Series Chipset Integrated Graphics Controller 
[8086:2e32] (rev 03) (prog-if 00 [VGA controller])
     Subsystem: Fujitsu Technology Solutions Device [1734:114c]
  InstallationDate: Installed on 2015-01-29 (0 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: ARCELIK AS 1YA-ARCELIK 5440
  ProcEnviron:
   LANGUAGE=tr
   PATH=(custom, no user)
   LANG=tr_TR.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-29-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/09/2010
  dmi.bios.vendor: FUJITSU // Phoenix Technologies Ltd.
  dmi.bios.version: 6.00 R1.02.3041.A1
  dmi.board.name: D3041-A1
  dmi.board.vendor: FUJITSU
  dmi.board.version: S26361-D3041-A1
  dmi.chassis.asset.tag: 93742010006534
  dmi.chassis.type: 6
  dmi.chassis.vendor: ARCELIK AS
  dmi.modalias: 
dmi:bvnFUJITSU//PhoenixTechnologiesLtd.:bvr6.00R1.02.3041.A1:bd11/09/2010:svnARCELIKAS:pn1YA-ARCELIK5440:pvrV102:rvnFUJITSU:rnD3041-A1:rvrS26361-D3041-A1:cvnARCELIKAS:ct6:cvr:
  dmi.product.name: 1YA-ARCELIK 5440
  dmi.product.version: V102
  dmi.sys.vendor: ARCELIK AS
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.2-0ubuntu0.1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.2-0ubuntu0.1
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Fri Jan 30 01:40:43 2015
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputHID 04f3:0103KEYBOARD, id 8
   inputHID 04f3:0103KEYBOARD, id 9
   inputSIGMACHIP Usb Mouse  MOUSE, id 10
  xserver.errors:

  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id2001
   vendor PTS
  xserver.version: 2:1.16.0-1ubuntu1.2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1416169/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1429369] Re: Was booting up after installing new nvidia 346 driver

[Expired for xorg-server (Ubuntu) because there has been no activity for
60 days.]

** Changed in: xorg-server (Ubuntu)
   Status: Incomplete = Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1429369

Title:
  Was booting up after installing new nvidia 346 driver

Status in xorg-server package in Ubuntu:
  Expired

Bug description:
  ** (apport-gtk:4235): WARNING **: Couldn't register with accessibility bus: 
Did not receive a reply. Possible causes include: the remote application did 
not send a reply, the message bus security policy blocked the reply, the reply 
timeout expired, or the network connection was broken.
  dpkg-query: inga paket hittades som matchar xorg-server
  Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.

  ProblemType: Crash
  DistroRelease: Ubuntu 15.04
  Package: xserver-xorg-core 2:1.16.2.901-1ubuntu4
  ProcVersionSignature: Ubuntu 3.19.0-7.7-generic 3.19.0
  Uname: Linux 3.19.0-7-generic x86_64
  NonfreeKernelModules: nvidia
  .proc.driver.nvidia.registry: Binary: 
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86_64 Kernel Module  346.35  Sat Jan 10 21:27:15 
PST 2015
   GCC version:  gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu8)
  ApportVersion: 2.16.2-0ubuntu1
  Architecture: amd64
  Date: Sat Mar  7 11:15:12 2015
  DistUpgraded: Fresh install
  DistroCodename: vivid
  DistroVariant: ubuntu
  DkmsStatus:
   bbswitch, 0.7, 3.18.0-13-generic, x86_64: installed
   bbswitch, 0.7, 3.19.0-7-generic, x86_64: installed
   nvidia-346, 346.35, 3.19.0-7-generic, x86_64: installed
   nvidia-346-uvm, 346.35, 3.19.0-7-generic, x86_64: installed
  ExecutablePath: /usr/bin/Xorg
  GraphicsCard:
   NVIDIA Corporation GM107 [GeForce GTX 750 Ti] [10de:1380] (rev a2) (prog-if 
00 [VGA controller])
 Subsystem: Gigabyte Technology Co., Ltd Device [1458:362d]
  InstallationDate: Installed on 2015-03-06 (0 days ago)
  InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Alpha amd64 (20150224)
  MachineType: ASUS All Series
  ProcCmdline: /usr/bin/X -nolisten tcp :1 vt1 -auth /tmp/serverauth.Hj1E3crMKK
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=sv_SE.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-7-generic 
root=UUID=8809ec78-7464-41f6-a433-2ec11aa31777 ro quiet splash
  SourcePackage: xorg-server
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 12/08/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 2202
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: B85M-G
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: Rev X.0x
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr2202:bd12/08/2014:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnB85M-G:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: All Series
  dmi.product.version: System Version
  dmi.sys.vendor: ASUS
  version.compiz: compiz N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.59-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.0~rc3-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.0~rc3-0ubuntu1
  version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.2.901-1ubuntu4
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917-1~exp1ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Mar  7 11:15:40 2015
  xserver.configfile: default
  xserver.errors: open /dev/fb0: No such file or directory
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   
  xserver.version: 2:1.16.2.901-1ubuntu4

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1429369/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1438188] Re: Follow up to Bug #1316873 - mouse button stuck when headset connected

[Expired for xorg (Ubuntu) because there has been no activity for 60
days.]

** Changed in: xorg (Ubuntu)
   Status: Incomplete = Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1438188

Title:
  Follow up to Bug #1316873 - mouse button stuck when headset connected

Status in xorg package in Ubuntu:
  Expired

Bug description:
  I got the same problem as the Comment 11 for bug 1316873
  (https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1316873/comments/11)
  and created hereby a report according to the subsequent commetn # 12
  for bug 1316873
  https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1316873/comments/12

  I got a headset Plantronics 655 DSP with two buttons included,
  namely vol up and vol down. I have used this headset for about 2 years
  without problems. Since a couple of weeks I can not use it any more,
  since as soon as I plug it in, Ubuntu thinks my left mouse button is
  pressed and no solution discussed on the net whatsoever worked. I had
  to unplug the headset to go back to normal mouse behaviour. btw, the
  touchpad behaves exactly the same as the mouse. Using a different
  mouse does also not change anything.


  --
  lsb_release -rd
  Description: Ubuntu 14.04.2 LTS
  Release: 14.04
  --
  apt-cache policy pkgname
  N: Unable to locate package pkgname

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  ProcVersionSignature: Ubuntu 3.13.0-48.80-generic 3.13.11-ckt16
  Uname: Linux 3.13.0-48-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Mon Mar 30 16:23:10 2015
  DistUpgraded: 2014-04-22 20:18:42,870 DEBUG icon theme changed, re-reading
  DistroCodename: trusty
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
  InstallationDate: Installed on 2012-11-24 (855 days ago)
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X3D/900X4C/900X4D
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-48-generic 
root=UUID=51804a88-f9c0-4c52-ad0a-0608ce51655e ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: Upgraded to trusty on 2014-04-22 (341 days ago)
  dmi.bios.date: 11/06/2012
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: P05AAC
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: SAMSUNG_NP1234567890
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvrP05AAC:bd11/06/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn900X3C/900X3D/900X4C/900X4D:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1:
  dmi.product.name: 900X3C/900X3D/900X4C/900X4D
  dmi.product.version: 0.1
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.
  version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1~ubuntu2
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.4
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.4
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Mon Mar 30 16:00:53 2015
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   
  xserver.version: 2:1.15.1-0ubuntu2.7

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1438188/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1284308] Re: Can't copy files from a bluetooth device: Another operation in progress

2015-05-29 Thread Ubuntu Foundations Team Bug Bot

The attachment A very primitive patch/workaround seems to be a patch.
If it isn't, please remove the patch flag from the attachment, remove
the patch tag, and if you are a member of the ~ubuntu-reviewers,
unsubscribe the team.

[This is an automated message performed by a Launchpad user owned by
~brian-murray, for any issues please contact him.]

** Tags added: patch

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/1284308

Title:
  Can't copy files from a bluetooth device: Another operation in
  progress

Status in GVFS:
  Expired
Status in gvfs package in Ubuntu:
  Triaged

Bug description:
  1)  lsb_release -rd
  Description:  Ubuntu 14.04.1 LTS
  Release:  14.04

  2) apt-cache policy gvfs
  gvfs:
    Installed: 1.20.1-1ubuntu1
    Candidate: 1.20.1-1ubuntu1
    Version table:
   *** 1.20.1-1ubuntu1 0
  500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages
  100 /var/lib/dpkg/status

  3) What is expected to happen is when one pairs their bluetooth phone,
  browses it, and attempt to copy a file from the phone to Ubuntu, it
  does so successfully.

  4) What happens instead is a window pops up noting:
  Error while copying “example.txt”.
  There was an error copying the file into /home/test/
  Show more details
  Another operation in progress

  Originally reproduced in 13.10.

  /usr/lib/gvfs/gvfsd-obexftp 'host=[XX:XX:XX:XX:XX:XX]'
  ** Message: transfer of example.txt to /tmp/gvfsobexftp-tmp-NTNMQX started
  ** Message: filename: /Internal storage/Download/example.txt (example.txt) 
copying to /tmp/gvfsobexftp-tmp-NTNMQX (retval 2)
  ** Message: ChangeCurrentFolderToRoot failed
  ** Message: transfer got cancelled
  ** Message: ChangeCurrentFolderToRoot failed

  WORKAROUND: Connect phone via USB cord to transfer files from the
  phone to Ubuntu.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: bluetooth (not installed)
  ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3
  Uname: Linux 3.11.0-17-generic x86_64
  ApportVersion: 2.12.5-0ubuntu2.2
  Architecture: amd64
  Date: Mon Feb 24 21:24:05 2014
  InstallationDate: Installed on 2013-10-11 (136 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  InterestingModules: bnep rfcomm btusb bluetooth
  MachineType: Acer Aspire V3-571G
  MarkForUpload: True
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic 
root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7
  SourcePackage: bluez
  UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago)
  dmi.bios.date: 10/15/2012
  dmi.bios.vendor: Acer
  dmi.bios.version: V2.07
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: VA50_HC_CR
  dmi.board.vendor: Acer
  dmi.board.version: Type2 - Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V2.07
  dmi.modalias: 
dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07:
  dmi.product.name: Aspire V3-571G
  dmi.product.version: V2.07
  dmi.sys.vendor: Acer
  hciconfig:
   hci0:Type: BR/EDR  Bus: USB
    BD Address: A4:17:31:0D:4A:70  ACL MTU: 1022:8  SCO MTU: 183:5
    UP RUNNING PSCAN ISCAN
    RX bytes:44318 acl:198 sco:0 events:355 errors:0
    TX bytes:6132 acl:178 sco:0 commands:82 errors:0

To manage notifications about this bug go to:
https://bugs.launchpad.net/gvfs/+bug/1284308/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460250] [NEW] xdiagnose errors

2015-05-29 Thread orellanafrank

Public bug reported:

Many errors show up on this.

ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: xorg 1:7.7+7ubuntu4
ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
Uname: Linux 3.19.0-18-generic x86_64
ApportVersion: 2.17.2-0ubuntu1.1
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: None
Date: Sat May 30 12:27:13 2015
DistUpgraded: Fresh install
DistroCodename: vivid
DistroVariant: ubuntu
DkmsStatus:
 virtualbox, 4.3.26, 3.19.0-15-generic, x86_64: installed
 virtualbox, 4.3.26, 3.19.0-18-generic, x86_64: installed
ExtraDebuggingInterest: Yes, if not too technical
GraphicsCard:
 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) 
[8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
   Subsystem: Lenovo ThinkPad T61/R61 [17aa:20b5]
   Subsystem: Lenovo ThinkPad T61/R61 [17aa:20b5]
InstallationDate: Installed on 2015-05-29 (0 days ago)
InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Release amd64 (20150422)
MachineType: LENOVO 7659R9A
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic 
root=UUID=a71f3d2e-9392-4897-b4cd-17182b18a06b ro quiet splash vt.handoff=7
SourcePackage: xorg
UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 03/18/2011
dmi.bios.vendor: LENOVO
dmi.bios.version: 7LETC9WW (2.29 )
dmi.board.name: 7659R9A
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnLENOVO:bvr7LETC9WW(2.29):bd03/18/2011:svnLENOVO:pn7659R9A:pvrThinkPadT61:rvnLENOVO:rn7659R9A:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 7659R9A
dmi.product.version: ThinkPad T61
dmi.sys.vendor: LENOVO
version.compiz: compiz N/A
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.60-2
version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1
version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917-1~exp1ubuntu2.1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2build1
xserver.bootTime: Sat May 30 11:01:13 2015
xserver.configfile: default
xserver.errors:
 
xserver.logfile: /var/log/Xorg.0.log
xserver.outputs:
 product id   16435 
 vendor LEN
xserver.version: 2:1.17.1-0ubuntu3

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug ubuntu vivid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1460250

Title:
  xdiagnose errors

Status in xorg package in Ubuntu:
  New

Bug description:
  Many errors show up on this.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  Date: Sat May 30 12:27:13 2015
  DistUpgraded: Fresh install
  DistroCodename: vivid
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.3.26, 3.19.0-15-generic, x86_64: installed
   virtualbox, 4.3.26, 3.19.0-18-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller 
(primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
 Subsystem: Lenovo ThinkPad T61/R61 [17aa:20b5]
 Subsystem: Lenovo ThinkPad T61/R61 [17aa:20b5]
  InstallationDate: Installed on 2015-05-29 (0 days ago)
  InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Release amd64 
(20150422)
  MachineType: LENOVO 7659R9A
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 no card
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic 
root=UUID=a71f3d2e-9392-4897-b4cd-17182b18a06b ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 7LETC9WW (2.29 )
  dmi.board.name: 7659R9A
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available

[Desktop-packages] [Bug 1351699] Re: Additional Drivers / Driver Manager shows no drivers for NVidia GTX 750ti - Missing modalias in nvidia-331.

2015-05-29 Thread dino99

** Changed in: nvidia-graphics-drivers-331 (Ubuntu)
 Assignee: Marcelo Siqueira (marcelosiqueirafisico) = (unassigned)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ubuntu-drivers-common in Ubuntu.
https://bugs.launchpad.net/bugs/1351699

Title:
  Additional Drivers / Driver Manager shows no drivers for NVidia GTX
  750ti - Missing modalias in nvidia-331.

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  Confirmed
Status in nvidia-graphics-drivers-331-updates package in Ubuntu:
  Confirmed
Status in ubuntu-drivers-common package in Ubuntu:
  Confirmed

Bug description:
  I'm on Ubuntu 14.04 (Trusty), up to date, on a computer with an NVidia
  GTX 750ti graphics card. I also tested on Utopic with a live daily dvd
  and the problem persists.

  The list under Additional Drivers is empty for my NVidia GTX 750ti video card:
  Also, running:
  ubuntu-drivers list
  or
  ubuntu-drivers devices
  produces an empty output.

  Running:
  software-properties-gtk --open-tab=4
  or
  kcmshell4 kcm_driver_manager
  shows no drivers found (not even the open source driver). I'll attach a 
screenshot here to show this.

  I had to workaround by installing the nvidia-331-updates package
  manually by console, which works very well for my video card. Though I
  worry about people not so familiar with the console.

  The empty list happens because the ubuntu-drivers command insists on making 
a perfect VID:PID match with each driver, and also because the specific 
modalias for making that match, is missing from nvidia-331 deb package. 
  The corresponding modalias for my NVidia 750ti is (as obtained from running 
ubuntu-drivers debug):
  
   pci:v10DEd1380sv1458sd362Dbc03sc00i00

  Which means that this should be included in the driver package
  description for my card to be matched by the Additional Drivers
  backend:

pci:v10DEd1380sv*sd*bc03sc*i*

  wich is currently missing from the Modaliases list in the description
  of the .DEB nvidia packages. That is the modalias required to make a
  match for the 750ti card.

  
  There are two possible solutions:
  -
A) Please ask the maintainer(s) of nvidia packages to add that modalias 
to the DEB package of nvidia-331 and nvidia-331-updates packages 

B) OR Please ask the developers of ubuntu-drivers-common
  package to match nvidia drivers by VID instead of insisting that the
  VID and PID both match perfectly. A lot of cards are left without
  drivers that way (not even noveau is matching my card currently).

  
  Important Details
  

  If I look at the current list of modaliases in the nvidia drivers, by
  running:

  apt-cache show 'nvidia*' | grep -i modaliases

  I cannot find my NVidia 750ti, which has a VID equal to 10DE, and a PID equal 
to 1380. I should be able to find the string v10DEd1380. 
  This causes the detection routine in ubuntu-drivers-common, to never match 
a driver (I found that routine is at 
/usr/lib/python3/dist-packages/UbuntuDrivers/detect.py), because the product id 
code for my 750ti is missing from all the drivers, and because 
ubuntu-drivers-common started to require a perfect match (both vendor id and 
product id). The routine is called: packages_for_modalias().

  There is a very big list of nvidia cards that COULD be affected by the
  same problem (empty AdditionalDrivers), not just my 750ti. This can be
  verified by looking at all the product ids for nvidia cards, and
  comparing to the modaliases present in the nvidia drivers packages:

  The PCI ID Repository
  http://pci-ids.ucw.cz/read/PC/10de

  and looking at the current full list of modaliases with:
apt-cache show 'nvidia*' | grep -i modaliases

  For instance, the NVidia 780ti and NVidia 780 are both missing too:

apt-cache show 'nvidia*' | grep Modaliases | grep d1007
apt-cache show 'nvidia*' | grep Modaliases | grep d1008

  (produces empty results)

  Though a NVidia GT 610 that I have in an old computer of mine, can
  be found, and does show a list in Additional Drivers:

   apt-cache show 'nvidia*' | grep Modaliases | grep d104A

  (shows a long modalias line matching for nvidia-304 and nvidia-331
  packages for the old GT 610).

  
  Please make Additional Drivers selector work for my NVidia GTX 750ti video 
card.
  FYI: This video card was released by nvidia in february 2014.

  Your help will be appreciated!

  Cordially,
  Juan Manuel Cabo

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: ubuntu-drivers-common 1:0.2.91.5
  ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
  Uname: Linux 3.13.0-32-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.2
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Sat Aug

[Desktop-packages] [Bug 1460153] Re: Evince fails to snap left/right in Gnome Shell with 9 pages

2015-05-29 Thread Sebastien Bacher

Thank you for taking the time to report this bug and helping to make
Ubuntu better. The issue you are reporting is an upstream one and it
would be nice if somebody having it could send the bug to the developers
of the software by following the instructions at
https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please
tell us the number of the upstream bug (or the link), so we can add a
bugwatch that will inform us about its status. Thanks in advance.

** Changed in: evince (Ubuntu)
   Importance: Undecided = Low

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evince in Ubuntu.
https://bugs.launchpad.net/bugs/1460153

Title:
  Evince fails to snap left/right in Gnome Shell with 9 pages

Status in evince package in Ubuntu:
  New

Bug description:
  Evince fails to snap to left or right edges in Gnome Shell if the pdf opened 
has 10 or more pages.
  To reproduce:

  1) Open a pdf in evince
  2) Try to snap to left and right screen edges by dragging or using Super+L / 
Super+R
  3) Observe that this doesn't work correctly

  A sample pdf has been attached for testing purposes

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: evince 3.14.2-0ubuntu2
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Fri May 29 17:50:05 2015
  InstallationDate: Installed on 2015-05-10 (19 days ago)
  InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Release amd64 
(20150422)
  KernLog:
   [12516.809554] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
   [12516.822305] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
   [22153.473615] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
   [22153.487176] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) 
filtered out
  SourcePackage: evince
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1460153/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1355554] Re: Most Rhythmbox keyboard shortcuts do not work in ver. 3.0

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: rhythmbox (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to rhythmbox in Ubuntu.
https://bugs.launchpad.net/bugs/134

Title:
  Most Rhythmbox keyboard shortcuts do not work in ver. 3.0

Status in rhythmbox package in Ubuntu:
  Confirmed

Bug description:
  Steps to Reproduce:
  1. Open Rhythmbox
  2. Press Ctrl+space, Alt+left or Alt+right

  Actual results:
  Pressing the avobe keyboard shortcuts has no effect

  Expected results:
  Ctrl+space should play/pause the music playback; Alt+left and Alt+right 
should go to te previows and next track, respectively.

  I've tried this on various Ubuntu 14.04 installations, including a
  fresh one.

  I'm using rhythmbox 3.0.2. I guess it's related to version 3.0,
  because this doesn't happen using Ubuntu 12.04, which includes version
  2.96.

  Other convinations like ctrl+up/down to increase and decrease the
  playback volume do work; and if I press ctrl+P it plays/pauses
  (altough the convination should be ctrl+space).

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: rhythmbox 3.0.2-0ubuntu2
  ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
  Uname: Linux 3.13.0-32-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Aug 11 21:03:44 2014
  InstallationDate: Installed on 2014-07-03 (39 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  SourcePackage: rhythmbox
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/134/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1449892] Re: yuv to rgb translation is faulty for Intel Generation 8 Graphics

This bug was fixed in the package xserver-xorg-video-intel -
2:2.99.917-1~exp1ubuntu2.2

---
xserver-xorg-video-intel (2:2.99.917-1~exp1ubuntu2.2) vivid-proposed; 
urgency=medium

  * fix-yuv-to-rgb-shared-on-intel-gen8.patch: Fix faulty yuv2rgb translation
on Intel Generation 8 Graphics. (LP: #1449892)

 -- Alessio Treglia quadris...@ubuntu.com  Fri, 29 May 2015 11:46:27
+0100

** Changed in: xserver-xorg-video-intel (Ubuntu)
   Status: Confirmed = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1449892

Title:
  yuv to rgb translation is faulty for Intel Generation 8 Graphics

Status in X.org xf86-video-intel:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Fix Released
Status in xserver-xorg-video-intel source package in Vivid:
  Fix Committed
Status in xserver-xorg-video-intel package in Debian:
  Confirmed

Bug description:
  [Impact]
  running mplayer or vlc the video output  is incorrect.  There are are 2 line 
steps on edges.
  The problems is known and there is already an upstream fix available.
  http://www.spinics.net/lists/intel-gfx/msg65030.html

  I have rebuild the driver with git from 2015-04-28, and the video
  output is correct now.

  The bugfix is for Generation 8 Intel graphics like Intel NUC with Core 
I5-5250 and HD6000 grahics in my case.
  The used version is Ubuntu vivid amd64.

  [Test Case]
  Launch Skype, VLC or mplayer and use xv as video output.
  A sample of the corruption can be found here:
  https://a.disquscdn.com/uploads/mediaembed/images/1942/867/original.jpg

  [Regression Potential]
  None. Admittedly I may not be the right one to fully assess the risk.
  Any help on this matter would be much appreciated.

  [Other Info]
  Already fixed upstream.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1449892/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1353951] Re: gnome online accounts require autentication on startup

2015-05-29 Thread Andrew Holmes

Also confirmed still broken in 15.04

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evolution-data-server in Ubuntu.
https://bugs.launchpad.net/bugs/1353951

Title:
  gnome online accounts require autentication on startup

Status in Evolution Data Server:
  Fix Released
Status in evolution-data-server package in Ubuntu:
  Fix Released
Status in gnome-online-accounts package in Ubuntu:
  Invalid
Status in evolution-data-server source package in Trusty:
  Fix Released
Status in gnome-online-accounts source package in Trusty:
  Invalid

Bug description:
  [Impact] Google calendar integration is broken, and users are
  requested to re-enter their Google password everytime they log in, or
  everytime they enable/disable their Google account from the System
  Settings.

  [Test Case]
  1) open gnome-online-accounts
  2) click + and add a google account
  3) enter user name and password
  4) confirm permissions for gnome
  5) Black window pops up and asks for google password, but does not accept the 
correct password.
  Google Contacts are not available in Gnome or Thunderbird

  [Regression Potential] Minimal: the fix is a backport of a patch from
  the evolution-data-server code which is already in 14.10, and which
  only touches the calendar code (which is currently broken).


  

  Gnome online accounts requires autentication on startup, but even typing the 
correct password in the box, the program says the password is wrong. By the way 
evolution and other programs work well with online accounts. I'm using 
Ubuntu-gnome 14.04 LTS 64bit on different machines and have the same behaviour.
  Just to be clear: online-accounts works well, just at startup it opens an 
administration window where it requires to insert the password for my google 
accounts; if I type the correct password it says that the password is wrong, 
the only way to close the window is to click on discard and then all works 
well.

To manage notifications about this bug go to:
https://bugs.launchpad.net/evolution-data-server/+bug/1353951/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1408963] Re: [Xbuntu 14.04, 14.10 and 15.04] Network manager stops working: iwl3945 0000:03:00.0: BSM uCode verification failed at addr ...; wlan0: deauthenticating from... by

2015-05-29 Thread Ross Heflin

(see last comment)

** Attachment added: wireless-info.txt.gz
   
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1408963/+attachment/4406798/+files/wireless-info.txt.gz

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1408963

Title:
  [Xbuntu 14.04, 14.10 and 15.04] Network manager stops working: iwl3945
  :03:00.0: BSM uCode verification failed at addr ...; wlan0:
  deauthenticating from... by local choice (Reason: 3=DEAUTH_LEAVING),

Status in linux-firmware package in Ubuntu:
  Confirmed
Status in network-manager package in Ubuntu:
  Confirmed

Bug description:
  From time to time, the system loses all wireles networks and kubuntu
  network manager applet goes blank - not even one network is shown. All
  wifi connections are broken. Rebooting fixes the issue, switching to
  WICD on-the-fly enables to continue browsing without rebooting, so it
  seems to be no hardware issue or iwl3945 issue.

  What to expect: stable connections and flawless network managing.
  What happens: so above.

  Further informations about the system, the network configuration, the
  package version can be found in the attachment, also parts of rsyslog
  and dmesg.

  Interesting, according to some helpers, are the following lines:
  dmesg:   wlan0: deauthenticating from 02:26:4d:ac:8f:45 by local choice 
(Reason: 3=DEAUTH_LEAVING)

  lsb_release -a
  No LSB modules are available.
  Distributor ID: Ubuntu
  Description:Ubuntu 14.10
  Release:14.10
  Codename:   utopic

  apt-cache policy network-manager
  network-manager:
    Installiert:   0.9.8.8-0ubuntu28
    Installationskandidat: 0.9.8.8-0ubuntu28
    Versionstabelle:
   *** 0.9.8.8-0ubuntu28 0
  500 http://de.archive.ubuntu.com/ubuntu/ utopic/main amd64 Packages
  100 /var/lib/dpkg/status

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1408963/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1408963] Re: [Xbuntu 14.04, 14.10 and 15.04] Network manager stops working: iwl3945 0000:03:00.0: BSM uCode verification failed at addr ...; wlan0: deauthenticating from... by

2015-05-29 Thread Ross Heflin

More details on situation encountered on IBM Thinkpad T60 w/ Intel
wireless 3945ABG

card used to deauth itself (but still appear connected according to the
network manager applet icon)  Telling nm to reconnect to the network
would fix the problem.

Now (after upgrade to xubuntu 15.04 from xubuntu 14.10), the wireless
light will shut off completely and refuse to come back on, even after:

sudo modprobe -r iwl3945

(wait a few seconds)

sudo modprobe iwl3945

Last time this happened I manage to dump some information, you'll find it 
attached.  Package versions are the latest from
vivid-updates and vivid-security.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1408963

Title:
  [Xbuntu 14.04, 14.10 and 15.04] Network manager stops working: iwl3945
  :03:00.0: BSM uCode verification failed at addr ...; wlan0:
  deauthenticating from... by local choice (Reason: 3=DEAUTH_LEAVING),

Status in linux-firmware package in Ubuntu:
  Confirmed
Status in network-manager package in Ubuntu:
  Confirmed

Bug description:
  From time to time, the system loses all wireles networks and kubuntu
  network manager applet goes blank - not even one network is shown. All
  wifi connections are broken. Rebooting fixes the issue, switching to
  WICD on-the-fly enables to continue browsing without rebooting, so it
  seems to be no hardware issue or iwl3945 issue.

  What to expect: stable connections and flawless network managing.
  What happens: so above.

  Further informations about the system, the network configuration, the
  package version can be found in the attachment, also parts of rsyslog
  and dmesg.

  Interesting, according to some helpers, are the following lines:
  dmesg:   wlan0: deauthenticating from 02:26:4d:ac:8f:45 by local choice 
(Reason: 3=DEAUTH_LEAVING)

  lsb_release -a
  No LSB modules are available.
  Distributor ID: Ubuntu
  Description:Ubuntu 14.10
  Release:14.10
  Codename:   utopic

  apt-cache policy network-manager
  network-manager:
    Installiert:   0.9.8.8-0ubuntu28
    Installationskandidat: 0.9.8.8-0ubuntu28
    Versionstabelle:
   *** 0.9.8.8-0ubuntu28 0
  500 http://de.archive.ubuntu.com/ubuntu/ utopic/main amd64 Packages
  100 /var/lib/dpkg/status

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1408963/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1458947]

module-udev-detect should skip card 1 when there is no pcm devices


crw-rw+ 1 root audio 116,  3 May 27 13:00 /dev/snd/controlC1
crw-rw+ 1 root audio 116,  2 May 27 13:00 /dev/snd/midiC1D0

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1458947

Title:
  QinHeng Electronics CH345 MIDI adapter triggers error

Status in PulseAudio sound server:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Incomplete

Bug description:
  Cheap oriental MIDI adapter starts up with the following error, but
  works as expected.*

  E: [pulseaudio] module.c: Failed to load module module-alsa-card
  (argument: device_id=1 name=usb-1a86_USB2.0-MIDI-00-USB20MIDI
  card_name=alsa_card.usb-1a86_USB2.0-MIDI-00-USB20MIDI
  namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no
  deferred_volume=yes use_ucm=yes card_properties=module-udev-
  detect.discovered=1): initialization failed.

  The device:
  1a86:752d QinHeng Electronics CH345 MIDI adapter

  Of course i'm not sure whether this is a PA problem or an ALSA or UDEV
  bug.

  Ubuntu 14.04.2 LTS
  Pulseaudio 1:4.0-0ubuntu11.1

  *  works almost as expected: there is one physical input and one
  output, but in ALSA one input and two outputs appear.

To manage notifications about this bug go to:
https://bugs.launchpad.net/pulseaudio/+bug/1458947/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1363070] Re: USB Mouse cursor jumps and buttons get deactivated with two PS/2 devices connected

2015-05-29 Thread Tim Banchi

a short update:
I found out that it has nothing to do with whether the second mouse is 
connected to the PS/2 port or the serial port. 
The mouse jumping also happens when connected to the serial port.

Because the other PS/2 mouse never showed any of these problems I guess
the culprit is the Logitech Trackman Live (or the receiver of it).
However this problem did not occur in Windows, so it might as well be a
combination of the specific hardware (Trackman Live,  PD01X docking
station) with the driver.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1363070

Title:
  USB Mouse cursor jumps and buttons get deactivated with two PS/2
  devices connected

Status in xorg package in Ubuntu:
  Expired

Bug description:
  This happens when two PS/2 devices are connected at the same time and a USB 
mouse is primarily used (eg using a Laptop with a PS/2 touchpad with an 
external USB mouse)
  Symptoms: after a while (can be 10 minutes or 1 hour) the mouse cursor starts 
randomly to jump (mostly down) and up and then the mouse buttons get 
deactivated (clicking does not have any effect). In that case, moving the mouse 
marks the underlying text (thus imitating a continuous left-click). This 
malbehaviour can be temporarily stopped when shortly using one PS/2 device. 
After a while the same symptoms reappear.

  Setup:
  Dell D430 docked to a Dell D/dock PD01x. The second PS/2 device is an 
(switched off) Logitech TrackMan Live! (infrared mouse connected via a PS/2 
receiver). 
  This bug appears under 12.04 LTS Unity and 14.04 with Xfce, KDE or Unity 
(always using the latest kernels). Using KDE the bug appears more often than 
when using XFCE.

  To resolve the issue:
  disconnect the external Trackman Live PS/2 device from the docking station.

  This bug drove me crazy. Only by accident I disconnected the Trackman
  and since then my USB mouse works well again. I verified that the bug
  reappears as soon as I connect the TrackMan again and I used different
  USB mice (as I thought that it might be a USB problem). It did not
  happen under Windows, so it is not hardware related.

  If this bug is going to be followed up I can test with a normal PS/2
  mouse (instead of the TrackMan Live) if the same bug happens or would
  be happy to provide logging data.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1363070/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1447143] Re: [SKL, i915_bpo] Rotation doesn't work

This bug was fixed in the package xserver-xorg-video-intel -
2:2.99.917-1~exp1ubuntu2.2

---
xserver-xorg-video-intel (2:2.99.917-1~exp1ubuntu2.2) vivid-proposed; 
urgency=medium

  * fix-yuv-to-rgb-shared-on-intel-gen8.patch: Fix faulty yuv2rgb translation
on Intel Generation 8 Graphics. (LP: #1449892)

 -- Alessio Treglia quadris...@ubuntu.com  Fri, 29 May 2015 11:46:27
+0100

** Changed in: xserver-xorg-video-intel (Ubuntu)
   Status: In Progress = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1447143

Title:
  [SKL, i915_bpo] Rotation doesn't work

Status in linux package in Ubuntu:
  Triaged
Status in xserver-xorg-video-intel package in Ubuntu:
  Fix Released
Status in linux source package in Utopic:
  New
Status in linux source package in Vivid:
  Triaged
Status in xserver-xorg-video-intel source package in Vivid:
  Fix Released

Bug description:
  [Impact]

  Rotating the display on Skylake results in a blank screen, needs this
  for the X driver

  commit 15c307d70e00bc035bb61be5d8b6f727925e3d34
  Author: Chris Wilson ch...@chris-wilson.co.uk
  Date:   Tue Mar 10 08:48:48 2015 +

  sna: Force frontbuffer to CPU for randr fallback

  and these two for i915_bpo in kernel

  commit 3b7a5119b5d2def1161226a4c6a643db537dff7e
  Author: Sonika Jindal sonika.jin...@intel.com
  Date:   Fri Apr 10 14:37:29 2015 +0530

  drm/i915/skl: Support for 90/270 rotation

  commit d81063669a99b216eb6b9dfb17add4f38a839674
  Author: Sonika Jindal sonika.jin...@intel.com
  Date:   Fri Apr 10 14:37:28 2015 +0530

  drm/i915/skl: Allow universal planes to position

  [Test Case]

  Use the display capplet, select rotate and apply. It should rotate
  instead of blanking the display.

  [Regression potential]

  Nope.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1447143/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460198] [NEW] Ubuntu Software center has issues removing software

2015-05-29 Thread Ben Shaver

Public bug reported:

When trying to uninstall various things via the Ubuntu Software Center, it will 
continue to display as if the item is still installed. Clicking to remove the 
package again results in a generic Ubuntu Software Center has encountered an 
error error message.
Happened on Xubuntu 15.04
With Software Center version: 13.10ubuntu6

ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: software-center 13.10-0ubuntu6
ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
Uname: Linux 3.19.0-18-generic x86_64
ApportVersion: 2.17.2-0ubuntu1.1
Architecture: amd64
CurrentDesktop: XFCE
Date: Fri May 29 13:17:51 2015
ExecutablePath: /usr/share/software-center/software-center
InstallationDate: Installed on 2015-05-29 (0 days ago)
InstallationMedia: Xubuntu 15.04 Vivid Vervet - Release amd64 (20150422.1)
InterpreterPath: /usr/bin/python2.7
PackageArchitecture: all
ProcEnviron:
 LANGUAGE=en_US
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=set
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: software-center
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: software-center (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug vivid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/1460198

Title:
  Ubuntu Software center has issues removing software

Status in software-center package in Ubuntu:
  New

Bug description:
  When trying to uninstall various things via the Ubuntu Software Center, it 
will continue to display as if the item is still installed. Clicking to remove 
the package again results in a generic Ubuntu Software Center has encountered 
an error error message.
  Happened on Xubuntu 15.04
  With Software Center version: 13.10ubuntu6

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: software-center 13.10-0ubuntu6
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Fri May 29 13:17:51 2015
  ExecutablePath: /usr/share/software-center/software-center
  InstallationDate: Installed on 2015-05-29 (0 days ago)
  InstallationMedia: Xubuntu 15.04 Vivid Vervet - Release amd64 (20150422.1)
  InterpreterPath: /usr/bin/python2.7
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: software-center
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1460198/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1460201] [NEW] wpa_supplicant chrashes when trying to look for wireless networks / on boot with a segfault

2015-05-29 Thread Mikkel Jeppesen

Public bug reported:

The wirless worked just fine after a fresh install of ubuntu 15.04, but
after a few minutes of using the internet (installing chromium, and
downloading a theme (flat studio dark) wpa supplicant now chrashes on
boot, and when I try to start it again with a segfault.

Here's the output of dmesg: http://paste.ubuntu.com/11438910/, the
segfault is at the bottom of the paste

ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: wpasupplicant 2.1-0ubuntu7.1
ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
Uname: Linux 3.19.0-18-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.17.2-0ubuntu1.1
Architecture: amd64
Date: Fri May 29 22:21:21 2015
InstallationDate: Installed on 2015-05-29 (0 days ago)
InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Release amd64 (20150422)
ProcEnviron:
 LANGUAGE=en_US:en
 TERM=xterm
 PATH=(custom, no user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: wpa
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: wpa (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug vivid

** Description changed:

  The wirless worked just fine after a fresh install of ubuntu 15.04, but
- after a few minutes of using the internet (installing chroium, and
+ after a few minutes of using the internet (installing chromium, and
  downloading a theme (flat studio dark) wpa supplicant now chrashes on
  boot, and when I try to start it again with a segfault.
  
  Here's the output of dmesg: http://paste.ubuntu.com/11438910/
  
  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: wpasupplicant 2.1-0ubuntu7.1
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  Date: Fri May 29 22:21:21 2015
  InstallationDate: Installed on 2015-05-29 (0 days ago)
  InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Release amd64 
(20150422)
  ProcEnviron:
-  LANGUAGE=en_US:en
-  TERM=xterm
-  PATH=(custom, no user)
-  LANG=en_US.UTF-8
-  SHELL=/bin/bash
+  LANGUAGE=en_US:en
+  TERM=xterm
+  PATH=(custom, no user)
+  LANG=en_US.UTF-8
+  SHELL=/bin/bash
  SourcePackage: wpa
  UpgradeStatus: No upgrade log present (probably fresh install)

** Description changed:

  The wirless worked just fine after a fresh install of ubuntu 15.04, but
  after a few minutes of using the internet (installing chromium, and
  downloading a theme (flat studio dark) wpa supplicant now chrashes on
  boot, and when I try to start it again with a segfault.
  
- Here's the output of dmesg: http://paste.ubuntu.com/11438910/
+ Here's the output of dmesg: http://paste.ubuntu.com/11438910/, the
+ segfault is at the bottom of the paste
  
  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: wpasupplicant 2.1-0ubuntu7.1
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  Date: Fri May 29 22:21:21 2015
  InstallationDate: Installed on 2015-05-29 (0 days ago)
  InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Release amd64 
(20150422)
  ProcEnviron:
   LANGUAGE=en_US:en
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: wpa
  UpgradeStatus: No upgrade log present (probably fresh install)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to wpa in Ubuntu.
https://bugs.launchpad.net/bugs/1460201

Title:
  wpa_supplicant chrashes when trying to look for wireless networks / on
  boot with a segfault

Status in wpa package in Ubuntu:
  New

Bug description:
  The wirless worked just fine after a fresh install of ubuntu 15.04,
  but after a few minutes of using the internet (installing chromium,
  and downloading a theme (flat studio dark) wpa supplicant now chrashes
  on boot, and when I try to start it again with a segfault.

  Here's the output of dmesg: http://paste.ubuntu.com/11438910/, the
  segfault is at the bottom of the paste

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: wpasupplicant 2.1-0ubuntu7.1
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  Date: Fri May 29 22:21:21 2015
  InstallationDate: Installed on 2015-05-29 (0 days ago)
  InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Release amd64 
(20150422)
  ProcEnviron:
   LANGUAGE=en_US:en
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: wpa
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/wpa/+bug/1460201/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to :

[Desktop-packages] [Bug 1449892] Re: yuv to rgb translation is faulty for Intel Generation 8 Graphics

The bug used to affect my Dell XPS 13 9343. It is no longer the case
with the package uploaded to vivid-proposed, the video output does look
very good now and corruptions are visible. Information on package's
installed version follow:

alessio@bizet:~$ dpkg-query -s xserver-xorg-video-intel
Package: xserver-xorg-video-intel
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 3174
Maintainer: Ubuntu Developers ubuntu-devel-disc...@lists.ubuntu.com
Architecture: amd64
Version: 2:2.99.917-1~exp1ubuntu2.2
Provides: xorg-driver-video
Depends: libc6 (= 2.17), libdrm-intel1 (= 2.4.38), libdrm2 (= 2.4.25), 
libpciaccess0 (= 0.8.0+git20071002), libpixman-1-0 (= 0.30.0), libudev1 (= 
183), libx11-6, libx11-xcb1, libxcb-dri2-0, libxcb-dri3-0, libxcb-sync1, 
libxcb-util0 (= 0.3.8), libxcb1, libxcursor1 ( 1.1.2), libxdamage1 (= 
1:1.1), libxext6, libxfixes3, libxinerama1, libxrandr2 (= 2:1.2.99.2), 
libxrender1, libxshmfence1, libxtst6, libxv1, libxvmc1, xorg-video-abi-19, 
xserver-xorg-core (= 2:1.16.99.901)
Description: X.Org X server -- Intel i8xx, i9xx display driver
 This package provides the driver for the Intel i8xx and i9xx family
 of chipsets, including i810, i815, i830, i845, i855, i865, i915, i945
 and i965 series chips.
 .
 This package also provides XvMC (XVideo Motion Compensation) drivers
 for i810/i815 and i9xx and newer chipsets.
 .
 This package is built from the X.org xf86-video-intel driver module.
Homepage: http://www.x.org/
Original-Maintainer: Debian X Strike Force debia...@lists.debian.org

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1449892

Title:
  yuv to rgb translation is faulty for Intel Generation 8 Graphics

Status in X.org xf86-video-intel:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Fix Released
Status in xserver-xorg-video-intel source package in Vivid:
  Fix Committed
Status in xserver-xorg-video-intel package in Debian:
  Confirmed

Bug description:
  [Impact]
  running mplayer or vlc the video output  is incorrect.  There are are 2 line 
steps on edges.
  The problems is known and there is already an upstream fix available.
  http://www.spinics.net/lists/intel-gfx/msg65030.html

  I have rebuild the driver with git from 2015-04-28, and the video
  output is correct now.

  The bugfix is for Generation 8 Intel graphics like Intel NUC with Core 
I5-5250 and HD6000 grahics in my case.
  The used version is Ubuntu vivid amd64.

  [Test Case]
  Launch Skype, VLC or mplayer and use xv as video output.
  A sample of the corruption can be found here:
  https://a.disquscdn.com/uploads/mediaembed/images/1942/867/original.jpg

  [Regression Potential]
  None. Admittedly I may not be the right one to fully assess the risk.
  Any help on this matter would be much appreciated.

  [Other Info]
  Already fixed upstream.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1449892/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1449892] Re: yuv to rgb translation is faulty for Intel Generation 8 Graphics