Uradi jayapalreddy.ur...@citrix.com
To: dev@cloudstack.apache.org dev@cloudstack.apache.org
Sent: Wednesday, 20 August, 2014 5:05:31 AM
Subject: Re: VRouter sets the same public IP on 2 interfaces
Hi Nux,
Can you please check /var/cache/cloud/cmdline for interfaces info.
If that is correct
Hi,
I have 4 networks defined (public, guest, storage and mgmt). It looks like the
VR sets up two internal NIcs (eth2 and eth3) for connecting to the public
network. It also sets the same IP address on them.
Egress = Allow is also ignored and my VMs can't reach anything.
Has anyone seen this
this glitch goes away.
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
From: Nux! n...@li.nux.ro
To: dev dev@cloudstack.apache.org, us...@cloudstack.apache.org
Sent: Tuesday, 19 August, 2014 12:12:31 PM
Subject: VRouter sets the same public IP
Have you used the same address range for your public network as your management?
--
Ian
-Original Message-
From: Nux! [mailto:n...@li.nux.ro]
Sent: dinsdag 19 augustus 2014 14:25
To: dev; us...@cloudstack.apache.org
Subject: Re: VRouter sets the same public IP on 2 interfaces
Right, so
, 19 August, 2014 1:47:57 PM
Subject: RE: VRouter sets the same public IP on 2 interfaces
Have you used the same address range for your public network as your
management?
--
Ian
-Original Message-
From: Nux! [mailto:n...@li.nux.ro]
Sent: dinsdag 19 augustus 2014 14:25
To: dev; us
:25:21 PM
Subject: Re: VRouter sets the same public IP on 2 interfaces
Right, so the SNAT on the VR is done on eth3 instead of eth2, not sure why
this is happening. Can't spot anything dodgy in the logs.
Once I remove the SNAT and add it on the eth2 (which has the same IP) then
all my egress
?
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
From: Nux! n...@li.nux.ro
To: dev dev@cloudstack.apache.org, us...@cloudstack.apache.org
Sent: Tuesday, 19 August, 2014 2:36:52 PM
Subject: Re: VRouter sets the same public IP on 2 interfaces
I've
.
Hope this helps.
-Original Message-
From: Nux! [mailto:n...@li.nux.ro]
Sent: Tuesday, 19 August 2014 9:41 PM
To: dev; us...@cloudstack.apache.org
Subject: Re: VRouter sets the same public IP on 2 interfaces
So the VR in the UI shows 3 NICs: isolated, control and public, but in SSH I
To: dev dev@cloudstack.apache.org, us...@cloudstack.apache.org
us...@cloudstack.apache.org
Sent: Tuesday, 19 August, 2014 6:02:16 PM
Subject: RE: VRouter sets the same public IP on 2 interfaces
Hi Nux,
I may have encountered the same issue when using 4.3.0.1 with VMware +
distributed switching
On Tue, Aug 19, 2014 at 1:12 PM, Nux! n...@li.nux.ro wrote:
Hi,
I have 4 networks defined (public, guest, storage and mgmt). It looks like
the VR sets up two internal NIcs (eth2 and eth3) for connecting to the
public network. It also sets the same IP address on them.
Egress = Allow is also
@cloudstack.apache.org
Sent: Tuesday, 19 August, 2014 6:14:31 PM
Subject: Re: VRouter sets the same public IP on 2 interfaces
On Tue, Aug 19, 2014 at 1:12 PM, Nux! n...@li.nux.ro wrote:
Hi,
I have 4 networks defined (public, guest, storage and mgmt). It looks like
the VR sets up two internal NIcs
: Tuesday, 19 August, 2014 6:14:31 PM
Subject: Re: VRouter sets the same public IP on 2 interfaces
On Tue, Aug 19, 2014 at 1:12 PM, Nux! n...@li.nux.ro wrote:
Hi,
I have 4 networks defined (public, guest, storage and mgmt). It looks like
the VR sets up two internal NIcs (eth2 and eth3
12 matches
Mail list logo