Update HWRM specification to 1.3.0 release.
Hardware Resource Manager or HWRM in short, is a set of API provided
by the firmware running in the ASIC to manage the various resources.
Signed-off-by: Ajit Khaparde <ajit.khaparde at broadcom.com>
---
drivers/net/bnxt/hsi_struct_def_dpdk.h | 4731 +++++++++++++++++---------------
1 file changed, 2445 insertions(+), 2286 deletions(-)
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h
b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 5115937..08396cc 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -31,8 +31,8 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#ifndef _HSI_STRUCT_DEF_EXTERNAL_H_
-#define _HSI_STRUCT_DEF_EXTERNAL_H_
+#ifndef _HSI_STRUCT_DEF_DPDK_
+#define _HSI_STRUCT_DEF_DPDK_
/*
* per-context HW statistics -- chip view
@@ -63,20 +63,26 @@ struct ctx_hw_stats64 {
uint64_t tpa_aborts;
} ctx_hw_stats64_t;
-/* HW Resource Manager Specification 1.2.0 */
+/* HW Resource Manager Specification 1.3.0 */
+/*
+ * Note: The Hardware Resource Manager (HWRM) manages various hardware
resources
+ * inside the chip. The HWRM is implemented in firmware, and runs on embedded
+ * processors inside the chip. This firmware service is vital part of the chip.
+ * The chip can not be used by a driver or HWRM client without the HWRM.
+ */
#define HWRM_VERSION_MAJOR 1
-#define HWRM_VERSION_MINOR 2
+#define HWRM_VERSION_MINOR 3
#define HWRM_VERSION_UPDATE 0
/*
* Following is the signature for HWRM message field that indicates not
* applicable (All F's). Need to cast it the size of the field if needed.
*/
-#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
-#define HWRM_MAX_REQ_LEN (128) /* hwrm_func_buf_rgtr */
-#define HWRM_MAX_RESP_LEN (176) /* hwrm_func_qstats */
-#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
-#define HW_HASH_KEY_SIZE 40
+#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
+#define HWRM_MAX_REQ_LEN (128) /* hwrm_func_buf_rgtr */
+#define HWRM_MAX_RESP_LEN (176) /* hwrm_func_qstats */
+#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
+#define HW_HASH_KEY_SIZE 40
#define HWRM_RESP_VALID_KEY 1 /* valid key for HWRM response */
/*
@@ -124,10 +130,10 @@ struct tx_bd_short {
/* This value identifies the type of buffer descriptor. */
#define TX_BD_SHORT_TYPE_MASK UINT32_C(0x3f)
#define TX_BD_SHORT_TYPE_SFT 0
- /*
- * Indicates that this BD is 16B long and is used for normal L2
- * packet transmission.
- */
+ /*
+ * Indicates that this BD is 16B long and is used for normal L2
+ * packet transmission.
+ */
#define TX_BD_SHORT_TYPE_TX_BD_SHORT (UINT32_C(0x0) << 0)
/*
* If set to 1, the packet ends with the data in the buffer pointed to
@@ -159,13 +165,13 @@ struct tx_bd_short {
*/
#define TX_BD_SHORT_FLAGS_LHINT_MASK UINT32_C(0x6000)
#define TX_BD_SHORT_FLAGS_LHINT_SFT 13
- /* indicates packet length < 512B */
+ /* indicates packet length < 512B */
#define TX_BD_SHORT_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13)
- /* indicates 512 <= packet length < 1KB */
+ /* indicates 512 <= packet length < 1KB */
#define TX_BD_SHORT_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13)
- /* indicates 1KB <= packet length < 2KB */
+ /* indicates 1KB <= packet length < 2KB */
#define TX_BD_SHORT_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
- /* indicates packet length >= 2KB */
+ /* indicates packet length >= 2KB */
#define TX_BD_SHORT_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
#define TX_BD_SHORT_FLAGS_LHINT_LAST TX_BD_SHORT_FLAGS_LHINT_GTE2K
/*
@@ -192,6 +198,7 @@ struct tx_bd_short {
* bytes. This field must be valid on all BDs of a packet.
*/
uint16_t len;
+
/*
* The opaque data field is pass through to the completion and can be
* used for any data that the driver wants to associate with the
@@ -217,10 +224,10 @@ struct tx_bd_long {
/* This value identifies the type of buffer descriptor. */
#define TX_BD_LONG_TYPE_MASK UINT32_C(0x3f)
#define TX_BD_LONG_TYPE_SFT 0
- /*
- * Indicates that this BD is 32B long and is used for normal L2
- * packet transmission.
- */
+ /*
+ * Indicates that this BD is 32B long and is used for normal L2
+ * packet transmission.
+ */
#define TX_BD_LONG_TYPE_TX_BD_LONG (UINT32_C(0x10) << 0)
/*
* If set to 1, the packet ends with the data in the buffer pointed to
@@ -252,13 +259,13 @@ struct tx_bd_long {
*/
#define TX_BD_LONG_FLAGS_LHINT_MASK UINT32_C(0x6000)
#define TX_BD_LONG_FLAGS_LHINT_SFT 13
- /* indicates packet length < 512B */
+ /* indicates packet length < 512B */
#define TX_BD_LONG_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13)
- /* indicates 512 <= packet length < 1KB */
+ /* indicates 512 <= packet length < 1KB */
#define TX_BD_LONG_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13)
- /* indicates 1KB <= packet length < 2KB */
+ /* indicates 1KB <= packet length < 2KB */
#define TX_BD_LONG_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
- /* indicates packet length >= 2KB */
+ /* indicates packet length >= 2KB */
#define TX_BD_LONG_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
#define TX_BD_LONG_FLAGS_LHINT_LAST TX_BD_LONG_FLAGS_LHINT_GTE2K
/*
@@ -312,8 +319,9 @@ struct tx_bd_long_hi {
* If set to 1, the controller replaces the TCP/UPD checksum fields of
* normal TCP/UPD checksum, or the inner TCP/UDP checksum field of the
* encapsulated TCP/UDP packets with the hardware calculated TCP/UDP
- * checksum for the packet associated with this descriptor. This bit
- * must be valid on the first BD of a packet.
+ * checksum for the packet associated with this descriptor. The flag is
+ * ignored if the LSO flag is set. This bit must be valid on the first
+ * BD of a packet.
*/
#define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1)
/*
@@ -341,9 +349,15 @@ struct tx_bd_long_hi {
/*
* If set to 1, The controller replaces the tunnel IP checksum field
* with hardware calculated IP checksum for the IP header of the packet
- * associated with this descriptor. In case of VXLAN, the controller
- * also replaces the outer header UDP checksum with hardware calculated
- * UDP checksum for the packet associated with this descriptor.
+ * associated with this descriptor. For outer UDP checksum, global outer
+ * UDP checksum TE_NIC register needs to be enabled. If the global outer
+ * UDP checksum TE_NIC register bit is set, outer UDP checksum will be
+ * calculated for the following cases: 1. Packets with tcp_udp_chksum
+ * flag set to offload checksum for inner packet AND the inner packet is
+ * TCP/UDP. If the inner packet is ICMP for example (non-TCP/UDP), even
+ * if the tcp_udp_chksum is set, the outer UDP checksum will not be
+ * calculated. 2. Packets with lso flag set which implies inner TCP
+ * checksum calculation as part of LSO operation.
*/
#define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10)
/*
@@ -367,7 +381,8 @@ struct tx_bd_long_hi {
* If set to zero when LSO is '1', then the IPID of the tunnel IP header
* will not be modified during LSO operations. If set to one when LSO is
* '1', then the IPID of the tunnel IP header will be incremented for
- * each subsequent segment of an LSO operation.
+ * each subsequent segment of an LSO operation. The flag is ignored if
+ * the LSO packet is a normal (non-tunneled) TCP packet.
*/
#define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80)
/*
@@ -427,17 +442,17 @@ struct tx_bd_long_hi {
/* When key=1, This is the VLAN tag TPID select value. */
#define TX_BD_LONG_CFA_META_VLAN_TPID_MASK UINT32_C(0x70000)
#define TX_BD_LONG_CFA_META_VLAN_TPID_SFT 16
- /* 0x88a8 */
+ /* 0x88a8 */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID88A8 (UINT32_C(0x0) << 16)
- /* 0x8100 */
+ /* 0x8100 */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID8100 (UINT32_C(0x1) << 16)
- /* 0x9100 */
+ /* 0x9100 */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9100 (UINT32_C(0x2) << 16)
- /* 0x9200 */
+ /* 0x9200 */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9200 (UINT32_C(0x3) << 16)
- /* 0x9300 */
+ /* 0x9300 */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300 (UINT32_C(0x4) << 16)
- /* Value programmed in CFA VLANTPID register. */
+ /* Value programmed in CFA VLANTPID register. */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG (UINT32_C(0x5) << 16)
#define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \
TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG
@@ -450,12 +465,12 @@ struct tx_bd_long_hi {
*/
#define TX_BD_LONG_CFA_META_KEY_MASK UINT32_C(0xf0000000)
#define TX_BD_LONG_CFA_META_KEY_SFT 28
- /* No editing */
+ /* No editing */
#define TX_BD_LONG_CFA_META_KEY_NONE (UINT32_C(0x0) << 28)
- /*
- * - meta[17:16] - TPID select value (0 = 0x8100). - meta[15:12]
- * - PRI/DE value. - meta[11:0] - VID value.
- */
+ /*
+ * - meta[17:16] - TPID select value (0 = 0x8100). - meta[15:12]
+ * - PRI/DE value. - meta[11:0] - VID value.
+ */
#define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28)
#define TX_BD_LONG_CFA_META_KEY_LAST TX_BD_LONG_CFA_META_KEY_VLAN_TAG
uint32_t cfa_meta;
@@ -466,10 +481,10 @@ struct rx_prod_pkt_bd {
/* This value identifies the type of buffer descriptor. */
#define RX_PROD_PKT_BD_TYPE_MASK UINT32_C(0x3f)
#define RX_PROD_PKT_BD_TYPE_SFT 0
- /*
- * Indicates that this BD is 16B long and is an RX Producer (ie.
- * empty) buffer descriptor.
- */
+ /*
+ * Indicates that this BD is 16B long and is an RX Producer (ie.
+ * empty) buffer descriptor.
+ */
#define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT (UINT32_C(0x4) << 0)
/*
* If set to 1, the packet will be placed at the address plus 2B. The 2
@@ -546,51 +561,50 @@ struct cmpl_base {
*/
#define CMPL_BASE_TYPE_MASK UINT32_C(0x3f)
#define CMPL_BASE_TYPE_SFT 0
- /* TX L2 completion: Completion of TX packet. Length = 16B */
+ /* TX L2 completion: Completion of TX packet. Length = 16B */
#define CMPL_BASE_TYPE_TX_L2 (UINT32_C(0x0) << 0)
- /*
- * RX L2 completion: Completion of and L2 RX packet.
- * Length = 32B
- */
+ /* RX L2 completion: Completion of and L2 RX packet. Length = 32B */
#define CMPL_BASE_TYPE_RX_L2 (UINT32_C(0x11) << 0)
- /*
- * RX Aggregation Buffer completion : Completion of an L2
- * aggregation buffer in support of TPA, HDS, or Jumbo packet
- * completion. Length = 16B
- */
+ /*
+ * RX Aggregation Buffer completion : Completion of an L2
+ * aggregation buffer in support of TPA, HDS, or Jumbo packet
+ * completion. Length = 16B
+ */
#define CMPL_BASE_TYPE_RX_AGG (UINT32_C(0x12) << 0)
- /*
- * RX L2 TPA Start Completion: Completion at the beginning of a
- * TPA operation. Length = 32B
- */
+ /*
+ * RX L2 TPA Start Completion: Completion at the beginning of a
+ * TPA operation. Length = 32B
+ */
#define CMPL_BASE_TYPE_RX_TPA_START (UINT32_C(0x13) << 0)
- /*
- * RX L2 TPA End Completion: Completion at the end of a TPA
- * operation. Length = 32B
- */
+ /*
+ * RX L2 TPA End Completion: Completion at the end of a TPA
+ * operation. Length = 32B
+ */
#define CMPL_BASE_TYPE_RX_TPA_END (UINT32_C(0x15) << 0)
- /*
- * Statistics Ejection Completion: Completion of statistics data
- * ejection buffer. Length = 16B
- */
+ /*
+ * Statistics Ejection Completion: Completion of statistics data
+ * ejection buffer. Length = 16B
+ */
#define CMPL_BASE_TYPE_STAT_EJECT (UINT32_C(0x1a) << 0)
- /* HWRM Command Completion: Completion of an HWRM command. */
+ /* HWRM Command Completion: Completion of an HWRM command. */
#define CMPL_BASE_TYPE_HWRM_DONE (UINT32_C(0x20) << 0)
- /* Forwarded HWRM Request */
+ /* Forwarded HWRM Request */
#define CMPL_BASE_TYPE_HWRM_FWD_REQ (UINT32_C(0x22) << 0)
- /* Forwarded HWRM Response */
+ /* Forwarded HWRM Response */
#define CMPL_BASE_TYPE_HWRM_FWD_RESP (UINT32_C(0x24) << 0)
- /* HWRM Asynchronous Event Information */
+ /* HWRM Asynchronous Event Information */
#define CMPL_BASE_TYPE_HWRM_ASYNC_EVENT (UINT32_C(0x2e) << 0)
- /* CQ Notification */
+ /* CQ Notification */
#define CMPL_BASE_TYPE_CQ_NOTIFICATION (UINT32_C(0x30) << 0)
- /* SRQ Threshold Event */
+ /* SRQ Threshold Event */
#define CMPL_BASE_TYPE_SRQ_EVENT (UINT32_C(0x32) << 0)
- /* DBQ Threshold Event */
+ /* DBQ Threshold Event */
#define CMPL_BASE_TYPE_DBQ_EVENT (UINT32_C(0x34) << 0)
- /* QP Async Notification */
+ /* QP Async Notification */
#define CMPL_BASE_TYPE_QP_EVENT (UINT32_C(0x38) << 0)
- /* Function Async Notification */
+ /* QP Async Extended Notification */
+ #define CMPL_BASE_TYPE_QP_EVENT2 (UINT32_C(0x39) << 0)
+ /* Function Async Notification */
#define CMPL_BASE_TYPE_FUNC_EVENT (UINT32_C(0x3a) << 0)
uint16_t type;
@@ -620,7 +634,7 @@ struct tx_cmpl {
*/
#define TX_CMPL_TYPE_MASK UINT32_C(0x3f)
#define TX_CMPL_TYPE_SFT 0
- /* TX L2 completion: Completion of TX packet. Length = 16B */
+ /* TX L2 completion: Completion of TX packet. Length = 16B */
#define TX_CMPL_TYPE_TX_L2 (UINT32_C(0x0) << 0)
/*
* When this bit is '1', it indicates a packet that has an error of some
@@ -659,9 +673,9 @@ struct tx_cmpl {
*/
#define TX_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
#define TX_CMPL_ERRORS_BUFFER_ERROR_SFT 1
- /* No error */
+ /* No error */
#define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR (UINT32_C(0x0) << 1)
- /* Bad Format: BDs were not formatted correctly. */
+ /* Bad Format: BDs were not formatted correctly. */
#define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT (UINT32_C(0x2) << 1)
#define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \
TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT
@@ -697,7 +711,7 @@ struct tx_cmpl {
uint16_t unused_1;
uint32_t unused_2;
-} __attribute__((packed)) tx_cmpl_t, *ptx_cmpl_t;
+} __attribute__((packed));
/* RX Packet Completion Record (32 bytes split to 2 16-byte struct) */
struct rx_pkt_cmpl {
@@ -708,10 +722,7 @@ struct rx_pkt_cmpl {
*/
#define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f)
#define RX_PKT_CMPL_TYPE_SFT 0
- /*
- * RX L2 completion: Completion of and L2 RX packet.
- * Length = 32B
- */
+ /* RX L2 completion: Completion of and L2 RX packet. Length = 32B */
#define RX_PKT_CMPL_TYPE_RX_L2 (UINT32_C(0x11) << 0)
/*
* When this bit is '1', it indicates a packet that has an error of some
@@ -721,15 +732,15 @@ struct rx_pkt_cmpl {
/* This field indicates how the packet was placed in the buffer. */
#define RX_PKT_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
#define RX_PKT_CMPL_FLAGS_PLACEMENT_SFT 7
- /* Normal: Packet was placed using normal algorithm. */
+ /* Normal: Packet was placed using normal algorithm. */
#define RX_PKT_CMPL_FLAGS_PLACEMENT_NORMAL (UINT32_C(0x0) << 7)
- /* Jumbo: Packet was placed using jumbo algorithm. */
+ /* Jumbo: Packet was placed using jumbo algorithm. */
#define RX_PKT_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7)
- /*
- * Header/Data Separation: Packet was placed using Header/Data
- * separation algorithm. The separation location is indicated by
- * the itype field.
- */
+ /*
+ * Header/Data Separation: Packet was placed using Header/Data
+ * separation algorithm. The separation location is indicated by
+ * the itype field.
+ */
#define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
#define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST \
RX_PKT_CMPL_FLAGS_PLACEMENT_HDS
@@ -741,51 +752,51 @@ struct rx_pkt_cmpl {
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
#define RX_PKT_CMPL_FLAGS_ITYPE_SFT 12
- /* Not Known: Indicates that the packet type was not known. */
+ /* Not Known: Indicates that the packet type was not known. */
#define RX_PKT_CMPL_FLAGS_ITYPE_NOT_KNOWN (UINT32_C(0x0) << 12)
- /*
- * IP Packet: Indicates that the packet was an IP packet, but
- * further classification was not possible.
- */
+ /*
+ * IP Packet: Indicates that the packet was an IP packet, but
+ * further classification was not possible.
+ */
#define RX_PKT_CMPL_FLAGS_ITYPE_IP (UINT32_C(0x1) << 12)
- /*
- * TCP Packet: Indicates that the packet was IP and TCP. This
- * indicates that the payload_offset field is valid.
- */
+ /*
+ * TCP Packet: Indicates that the packet was IP and TCP. This
+ * indicates that the payload_offset field is valid.
+ */
#define RX_PKT_CMPL_FLAGS_ITYPE_TCP (UINT32_C(0x2) << 12)
- /*
- * UDP Packet: Indicates that the packet was IP and UDP. This
- * indicates that the payload_offset field is valid.
- */
+ /*
+ * UDP Packet: Indicates that the packet was IP and UDP. This
+ * indicates that the payload_offset field is valid.
+ */
#define RX_PKT_CMPL_FLAGS_ITYPE_UDP (UINT32_C(0x3) << 12)
- /*
- * FCoE Packet: Indicates that the packet was recognized as a
- * FCoE. This also indicates that the payload_offset field is
- * valid.
- */
+ /*
+ * FCoE Packet: Indicates that the packet was recognized as a
+ * FCoE. This also indicates that the payload_offset field is
+ * valid.
+ */
#define RX_PKT_CMPL_FLAGS_ITYPE_FCOE (UINT32_C(0x4) << 12)
- /*
- * RoCE Packet: Indicates that the packet was recognized as a
- * RoCE. This also indicates that the payload_offset field is
- * valid.
- */
+ /*
+ * RoCE Packet: Indicates that the packet was recognized as a
+ * RoCE. This also indicates that the payload_offset field is
+ * valid.
+ */
#define RX_PKT_CMPL_FLAGS_ITYPE_ROCE (UINT32_C(0x5) << 12)
- /*
- * ICMP Packet: Indicates that the packet was recognized as
- * ICMP. This indicates that the payload_offset field is valid.
- */
+ /*
+ * ICMP Packet: Indicates that the packet was recognized as
+ * ICMP. This indicates that the payload_offset field is valid.
+ */
#define RX_PKT_CMPL_FLAGS_ITYPE_ICMP (UINT32_C(0x7) << 12)
- /*
- * PtP packet wo/timestamp: Indicates that the packet was
- * recognized as a PtP packet.
- */
+ /*
+ * PtP packet wo/timestamp: Indicates that the packet was
+ * recognized as a PtP packet.
+ */
#define RX_PKT_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP \
(UINT32_C(0x8) << 12)
- /*
- * PtP packet w/timestamp: Indicates that the packet was
- * recognized as a PtP packet and that a timestamp was taken for
- * the packet.
- */
+ /*
+ * PtP packet w/timestamp: Indicates that the packet was
+ * recognized as a PtP packet and that a timestamp was taken for
+ * the packet.
+ */
#define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP (UINT32_C(0x9) << 12)
#define RX_PKT_CMPL_FLAGS_ITYPE_LAST \
RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
@@ -812,15 +823,15 @@ struct rx_pkt_cmpl {
* each pass through the completion queue. The even passes will write 1.
* The odd passes will write 0.
*/
- #define RX_PKT_CMPL_V1 UINT32_C(0x1)
+ #define RX_PKT_CMPL_V1 UINT32_C(0x1)
/*
* This value is the number of aggregation buffers that follow this
* entry in the completion ring that are a part of this packet. If the
* value is zero, then the packet is completely contained in the buffer
* space provided for the packet in the RX ring.
*/
- #define RX_PKT_CMPL_AGG_BUFS_MASK UINT32_C(0x3e)
- #define RX_PKT_CMPL_AGG_BUFS_SFT 1
+ #define RX_PKT_CMPL_AGG_BUFS_MASK UINT32_C(0x3e)
+ #define RX_PKT_CMPL_AGG_BUFS_SFT 1
uint8_t agg_bufs_v1;
/*
@@ -830,9 +841,10 @@ struct rx_pkt_cmpl {
uint8_t rss_hash_type;
/*
- * This value indicates the offset from the beginning of the packet
- * where the inner payload starts. This value is valid for TCP, UDP,
- * FCoE, and RoCE packets.
+ * This value indicates the offset in bytes from the beginning of the
+ * packet where the inner payload starts. This value is valid for TCP,
+ * UDP, FCoE, and RoCE packets. A value of zero indicates that header is
+ * 256B into the packet.
*/
uint8_t payload_offset;
@@ -874,15 +886,15 @@ struct rx_pkt_cmpl_hi {
/* This value indicates what format the metadata field is. */
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4
- /* No metadata informtaion. Value is zero. */
+ /* No metadata informtaion. Value is zero. */
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4)
- /*
- * The metadata field contains the VLAN tag and TPID value. -
- * metadata[11:0] contains the vlan VID value. - metadata[12]
- * contains the vlan DE value. - metadata[15:13] contains the
- * vlan PRI value. - metadata[31:16] contains the vlan TPID
- * value.
- */
+ /*
+ * The metadata field contains the VLAN tag and TPID value. -
+ * metadata[11:0] contains the vlan VID value. - metadata[12]
+ * contains the vlan DE value. - metadata[15:13] contains the
+ * vlan PRI value. - metadata[31:16] contains the vlan TPID
+ * value.
+ */
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4)
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \
RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN
@@ -924,25 +936,25 @@ struct rx_pkt_cmpl_hi {
*/
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_SFT 1
- /* No buffer error */
+ /* No buffer error */
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
(UINT32_C(0x0) << 1)
- /*
- * Did Not Fit: Packet did not fit into packet buffer provided.
- * For regular placement, this means the packet did not fit in
- * the buffer provided. For HDS and jumbo placement, this means
- * that the packet could not be placed into 7 physical buffers
- * or less.
- */
+ /*
+ * Did Not Fit: Packet did not fit into packet buffer provided.
+ * For regular placement, this means the packet did not fit in
+ * the buffer provided. For HDS and jumbo placement, this means
+ * that the packet could not be placed into 7 physical buffers
+ * or less.
+ */
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
(UINT32_C(0x1) << 1)
- /*
- * Not On Chip: All BDs needed for the packet were not on-chip
- * when the packet arrived.
- */
+ /*
+ * Not On Chip: All BDs needed for the packet were not on-chip
+ * when the packet arrived.
+ */
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
(UINT32_C(0x2) << 1)
- /* Bad Format: BDs were not formatted correctly. */
+ /* Bad Format: BDs were not formatted correctly. */
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
(UINT32_C(0x3) << 1)
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \
@@ -972,48 +984,48 @@ struct rx_pkt_cmpl_hi {
*/
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_MASK UINT32_C(0xe00)
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_SFT 9
- /*
- * No additional error occurred on the tunnel portion of the
- * packet of the packet does not have a tunnel.
- */
+ /*
+ * No additional error occurred on the tunnel portion of the
+ * packet of the packet does not have a tunnel.
+ */
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_NO_ERROR (UINT32_C(0x0) << 9)
- /*
- * Indicates that IP header version does not match expectation
- * from L2 Ethertype for IPv4 and IPv6 in the tunnel header.
- */
+ /*
+ * Indicates that IP header version does not match expectation
+ * from L2 Ethertype for IPv4 and IPv6 in the tunnel header.
+ */
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \
(UINT32_C(0x1) << 9)
- /*
- * Indicates that header length is out of range in the tunnel
- * header. Valid for IPv4.
- */
+ /*
+ * Indicates that header length is out of range in the tunnel
+ * header. Valid for IPv4.
+ */
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \
(UINT32_C(0x2) << 9)
- /*
- * Indicates that the physical packet is shorter than that
- * claimed by the PPPoE header length for a tunnel PPPoE packet.
- */
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the PPPoE header length for a tunnel PPPoE packet.
+ */
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR \
(UINT32_C(0x3) << 9)
- /*
- * Indicates that physical packet is shorter than that claimed
- * by the tunnel l3 header length. Valid for IPv4, or IPv6
- * tunnel packet packets.
- */
+ /*
+ * Indicates that physical packet is shorter than that claimed
+ * by the tunnel l3 header length. Valid for IPv4, or IPv6
+ * tunnel packet packets.
+ */
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \
(UINT32_C(0x4) << 9)
- /*
- * Indicates that the physical packet is shorter than that
- * claimed by the tunnel UDP header length for a tunnel UDP
- * packet that is not fragmented.
- */
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the tunnel UDP header length for a tunnel UDP
+ * packet that is not fragmented.
+ */
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \
(UINT32_C(0x5) << 9)
- /*
- * indicates that the IPv4 TTL or IPv6 hop limit check have
- * failed (e.g. TTL = 0) in the tunnel header. Valid for IPv4,
- * and IPv6.
- */
+ /*
+ * indicates that the IPv4 TTL or IPv6 hop limit check have
+ * failed (e.g. TTL = 0) in the tunnel header. Valid for IPv4,
+ * and IPv6.
+ */
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \
(UINT32_C(0x6) << 9)
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST \
@@ -1024,56 +1036,56 @@ struct rx_pkt_cmpl_hi {
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_MASK UINT32_C(0xf000)
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_SFT 12
- /*
- * No additional error occurred on the tunnel portion of the
- * packet of the packet does not have a tunnel.
- */
+ /*
+ * No additional error occurred on the tunnel portion of the
+ * packet of the packet does not have a tunnel.
+ */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_NO_ERROR (UINT32_C(0x0) << 12)
- /*
- * Indicates that IP header version does not match expectation
- * from L2 Ethertype for IPv4 and IPv6 or that option other than
- * VFT was parsed on FCoE packet.
- */
+ /*
+ * Indicates that IP header version does not match expectation
+ * from L2 Ethertype for IPv4 and IPv6 or that option other than
+ * VFT was parsed on FCoE packet.
+ */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION \
(UINT32_C(0x1) << 12)
- /*
- * indicates that header length is out of range. Valid for IPv4
- * and RoCE
- */
+ /*
+ * indicates that header length is out of range. Valid for IPv4
+ * and RoCE
+ */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \
(UINT32_C(0x2) << 12)
- /*
- * indicates that the IPv4 TTL or IPv6 hop limit check have
- * failed (e.g. TTL = 0). Valid for IPv4, and IPv6
- */
+ /*
+ * indicates that the IPv4 TTL or IPv6 hop limit check have
+ * failed (e.g. TTL = 0). Valid for IPv4, and IPv6
+ */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_TTL (UINT32_C(0x3) << 12)
- /*
- * Indicates that physical packet is shorter than that claimed
- * by the l3 header length. Valid for IPv4, IPv6 packet or RoCE
- * packets.
- */
+ /*
+ * Indicates that physical packet is shorter than that claimed
+ * by the l3 header length. Valid for IPv4, IPv6 packet or RoCE
+ * packets.
+ */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \
(UINT32_C(0x4) << 12)
- /*
- * Indicates that the physical packet is shorter than that
- * claimed by the UDP header length for a UDP packet that is not
- * fragmented.
- */
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the UDP header length for a UDP packet that is not
+ * fragmented.
+ */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \
(UINT32_C(0x5) << 12)
- /*
- * Indicates that TCP header length > IP payload. Valid for TCP
- * packets only.
- */
+ /*
+ * Indicates that TCP header length > IP payload. Valid for TCP
+ * packets only.
+ */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \
(UINT32_C(0x6) << 12)
- /* Indicates that TCP header length < 5. Valid for TCP. */
+ /* Indicates that TCP header length < 5. Valid for TCP. */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \
(UINT32_C(0x7) << 12)
- /*
- * Indicates that TCP option headers result in a TCP header size
- * that does not match data offset in TCP header. Valid for TCP.
- */
+ /*
+ * Indicates that TCP option headers result in a TCP header size
+ * that does not match data offset in TCP header. Valid for TCP.
+ */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \
(UINT32_C(0x8) << 12)
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST \
@@ -1110,7 +1122,7 @@ struct hwrm_fwd_req_cmpl {
*/
#define HWRM_FWD_REQ_CMPL_TYPE_MASK UINT32_C(0x3f)
#define HWRM_FWD_REQ_CMPL_TYPE_SFT 0
- /* Forwarded HWRM Request */
+ /* Forwarded HWRM Request */
#define HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ (UINT32_C(0x22) << 0)
/* Length of forwarded request in bytes. */
#define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK UINT32_C(0xffc0)
@@ -1146,53 +1158,61 @@ struct hwrm_async_event_cmpl {
* the LSB identifies the length of the record in 16B units. Even values
* indicate 16B records. Odd values indicate 32B records.
*/
- #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0
- /* HWRM Asynchronous Event Information */
- #define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT \
- (UINT32_C(0x2e) << 0)
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT (UINT32_C(0x2e)
<< 0)
uint16_t type;
/* Identifiers of events. */
- /* Link status changed */
+ /* Link status changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE \
(UINT32_C(0x0) << 0)
- /* Link MTU changed */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE \
+ /* Link MTU changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE \
(UINT32_C(0x1) << 0)
- /* Link speed changed */
+ /* Link speed changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE \
(UINT32_C(0x2) << 0)
- /* DCB Configuration changed */
+ /* DCB Configuration changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE \
(UINT32_C(0x3) << 0)
- /* Port connection not allowed */
+ /* Port connection not allowed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED \
(UINT32_C(0x4) << 0)
- /* Link speed configuration was not allowed */
+ /* Link speed configuration was not allowed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \
(UINT32_C(0x5) << 0)
- /* Function driver unloaded */
+ /* Link speed configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE \
+ (UINT32_C(0x6) << 0)
+ /* Port PHY configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE \
+ (UINT32_C(0x7) << 0)
+ /* Function driver unloaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \
(UINT32_C(0x10) << 0)
- /* Function driver loaded */
+ /* Function driver loaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD \
(UINT32_C(0x11) << 0)
- /* PF driver unloaded */
+ /* PF driver unloaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD \
(UINT32_C(0x20) << 0)
- /* PF driver loaded */
+ /* PF driver loaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD \
(UINT32_C(0x21) << 0)
- /* VF Function Level Reset (FLR) */
+ /* VF Function Level Reset (FLR) */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR (UINT32_C(0x30) << 0)
- /* VF MAC Address Change */
+ /* VF MAC Address Change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE \
(UINT32_C(0x31) << 0)
- /* PF-VF communication channel status change. */
+ /* PF-VF communication channel status change. */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \
(UINT32_C(0x32) << 0)
- /* HWRM Error */
+ /* VF Configuration Change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE \
+ (UINT32_C(0x33) << 0)
+ /* HWRM Error */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR \
(UINT32_C(0xff) << 0)
uint16_t event_id;
@@ -1222,13 +1242,6 @@ struct hwrm_async_event_cmpl {
uint32_t event_data1;
} __attribute__((packed));
-/*
- * Note: The Hardware Resource Manager (HWRM) manages various hardware
resources
- * inside the chip. The HWRM is implemented in firmware, and runs on embedded
- * processors inside the chip. This firmware is vital part of the chip's
- * hardware. The chip can not be used by driver without it.
- */
-
/* Input (16 bytes) */
struct input {
/*
@@ -1284,16 +1297,17 @@ struct output {
uint16_t resp_len;
} __attribute__((packed));
-/* hwrm_cfa_l2_filter_alloc */
+/* hwrm_ver_get */
/*
- * A filter is used to identify traffic that contains a matching set of
- * parameters like unicast or broadcast MAC address or a VLAN tag amongst
- * other things which then allows the ASIC to direct the incoming traffic
- * to an appropriate VNIC or Rx ring.
+ * Description: This function is called by a driver to determine the HWRM
+ * interface version supported by the HWRM firmware, the version of HWRM
+ * firmware implementation, the name of HWRM firmware, the versions of other
+ * embedded firmwares, and the names of other embedded firmwares, etc. Any
+ * interface or firmware version with major = 0, minor = 0, and update = 0
shall
+ * be considered an invalid version.
*/
-
-/* Input (96 bytes) */
-struct hwrm_cfa_l2_filter_alloc_input {
+/* Input (24 bytes) */
+struct hwrm_ver_get_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -1325,325 +1339,270 @@ struct hwrm_cfa_l2_filter_alloc_input {
uint64_t resp_addr;
/*
- * Enumeration denoting the RX, TX type of the resource. This
- * enumeration is used for resources that are similar for both TX and RX
- * paths of the chip.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \
- UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
- (UINT32_C(0x0) << 0)
- /* rx path */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
- (UINT32_C(0x1) << 0)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
- /*
- * Setting of this flag indicates the applicability to the loopback
- * path.
+ * This field represents the major version of HWRM interface
+ * specification supported by the driver HWRM implementation. The
+ * interface major version is intended to change only when non backward
+ * compatible changes are made to the HWRM interface specification.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
- UINT32_C(0x2)
+ uint8_t hwrm_intf_maj;
+
/*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
+ * This field represents the minor version of HWRM interface
+ * specification supported by the driver HWRM implementation. A change
+ * in interface minor version is used to reflect significant backward
+ * compatible modification to HWRM interface specification. This can be
+ * due to addition or removal of functionality. HWRM interface
+ * specifications with the same major version but different minor
+ * versions are compatible.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \
- UINT32_C(0x4)
+ uint8_t hwrm_intf_min;
+
/*
- * If this flag is set, all t_l2_* fields are invalid and they should
- * not be specified. If this flag is set, then l2_* fields refer to
- * fields of outermost L2 header.
+ * This field represents the update version of HWRM interface
+ * specification supported by the driver HWRM implementation. The
+ * interface update version is used to reflect minor changes or bug
+ * fixes to a released HWRM interface specification.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \
- UINT32_C(0x8)
- uint32_t flags;
+ uint8_t hwrm_intf_upd;
- /* This bit must be '1' for the l2_addr field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
- UINT32_C(0x1)
- /* This bit must be '1' for the l2_addr_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
- UINT32_C(0x2)
- /* This bit must be '1' for the l2_ovlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \
- UINT32_C(0x4)
- /* This bit must be '1' for the l2_ovlan_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
- UINT32_C(0x8)
- /* This bit must be '1' for the l2_ivlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
- UINT32_C(0x10)
- /* This bit must be '1' for the l2_ivlan_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
- UINT32_C(0x20)
- /* This bit must be '1' for the t_l2_addr field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \
- UINT32_C(0x40)
+ uint8_t unused_0[5];
+} __attribute__((packed));
+
+
+/* Output (128 bytes) */
+struct hwrm_ver_get_output {
/*
- * This bit must be '1' for the t_l2_addr_mask field to be configured.
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
- UINT32_C(0x80)
- /* This bit must be '1' for the t_l2_ovlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
- UINT32_C(0x100)
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
+
/*
- * This bit must be '1' for the t_l2_ovlan_mask field to be configured.
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
- UINT32_C(0x200)
- /* This bit must be '1' for the t_l2_ivlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
- UINT32_C(0x400)
+ uint16_t resp_len;
+
/*
- * This bit must be '1' for the t_l2_ivlan_mask field to be configured.
+ * This field represents the major version of HWRM interface
+ * specification supported by the HWRM implementation. The interface
+ * major version is intended to change only when non backward compatible
+ * changes are made to the HWRM interface specification. A HWRM
+ * implementation that is compliant with this specification shall
+ * provide value of 1 in this field.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
- UINT32_C(0x800)
- /* This bit must be '1' for the src_type field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \
- UINT32_C(0x1000)
- /* This bit must be '1' for the src_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \
- UINT32_C(0x2000)
- /* This bit must be '1' for the tunnel_type field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
- UINT32_C(0x4000)
- /* This bit must be '1' for the dst_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
- UINT32_C(0x8000)
+ uint8_t hwrm_intf_maj;
+
/*
- * This bit must be '1' for the mirror_vnic_id field to be configured.
+ * This field represents the minor version of HWRM interface
+ * specification supported by the HWRM implementation. A change in
+ * interface minor version is used to reflect significant backward
+ * compatible modification to HWRM interface specification. This can be
+ * due to addition or removal of functionality. HWRM interface
+ * specifications with the same major version but different minor
+ * versions are compatible. A HWRM implementation that is compliant with
+ * this specification shall provide value of 2 in this field.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
- UINT32_C(0x10000)
- uint32_t enables;
+ uint8_t hwrm_intf_min;
/*
- * This value sets the match value for the L2 MAC address. Destination
- * MAC address for RX path. Source MAC address for TX path.
+ * This field represents the update version of HWRM interface
+ * specification supported by the HWRM implementation. The interface
+ * update version is used to reflect minor changes or bug fixes to a
+ * released HWRM interface specification. A HWRM implementation that is
+ * compliant with this specification shall provide value of 2 in this
+ * field.
*/
- uint8_t l2_addr[6];
+ uint8_t hwrm_intf_upd;
- uint8_t unused_0;
- uint8_t unused_1;
+ uint8_t hwrm_intf_rsvd;
/*
- * This value sets the mask value for the L2 address. A value of 0 will
- * mask the corresponding bit from compare.
+ * This field represents the major version of HWRM firmware. A change in
+ * firmware major version represents a major firmware release.
*/
- uint8_t l2_addr_mask[6];
-
- /* This value sets VLAN ID value for outer VLAN. */
- uint16_t l2_ovlan;
+ uint8_t hwrm_fw_maj;
/*
- * This value sets the mask value for the ovlan id. A value of 0 will
- * mask the corresponding bit from compare.
+ * This field represents the minor version of HWRM firmware. A change in
+ * firmware minor version represents significant firmware functionality
+ * changes.
*/
- uint16_t l2_ovlan_mask;
-
- /* This value sets VLAN ID value for inner VLAN. */
- uint16_t l2_ivlan;
+ uint8_t hwrm_fw_min;
/*
- * This value sets the mask value for the ivlan id. A value of 0 will
- * mask the corresponding bit from compare.
+ * This field represents the build version of HWRM firmware. A change in
+ * firmware build version represents bug fixes to a released firmware.
*/
- uint16_t l2_ivlan_mask;
+ uint8_t hwrm_fw_bld;
- uint8_t unused_2;
- uint8_t unused_3;
+ /*
+ * This field is a reserved field. This field can be used to represent
+ * firmware branches or customer specific releases tied to a specific
+ * (major,minor,update) version of the HWRM firmware.
+ */
+ uint8_t hwrm_fw_rsvd;
/*
- * This value sets the match value for the tunnel L2 MAC address.
- * Destination MAC address for RX path. Source MAC address for TX path.
+ * This field represents the major version of mgmt firmware. A change in
+ * major version represents a major release.
*/
- uint8_t t_l2_addr[6];
+ uint8_t mgmt_fw_maj;
- uint8_t unused_4;
- uint8_t unused_5;
+ /*
+ * This field represents the minor version of mgmt firmware. A change in
+ * minor version represents significant functionality changes.
+ */
+ uint8_t mgmt_fw_min;
/*
- * This value sets the mask value for the tunnel L2 address. A value of
- * 0 will mask the corresponding bit from compare.
+ * This field represents the build version of mgmt firmware. A change in
+ * update version represents bug fixes.
*/
- uint8_t t_l2_addr_mask[6];
+ uint8_t mgmt_fw_bld;
- /* This value sets VLAN ID value for tunnel outer VLAN. */
- uint16_t t_l2_ovlan;
+ /*
+ * This field is a reserved field. This field can be used to represent
+ * firmware branches or customer specific releases tied to a specific
+ * (major,minor,update) version
+ */
+ uint8_t mgmt_fw_rsvd;
/*
- * This value sets the mask value for the tunnel ovlan id. A value of 0
- * will mask the corresponding bit from compare.
+ * This field represents the major version of network control firmware.
+ * A change in major version represents a major release.
*/
- uint16_t t_l2_ovlan_mask;
+ uint8_t netctrl_fw_maj;
- /* This value sets VLAN ID value for tunnel inner VLAN. */
- uint16_t t_l2_ivlan;
+ /*
+ * This field represents the minor version of network control firmware.
+ * A change in minor version represents significant functionality
+ * changes.
+ */
+ uint8_t netctrl_fw_min;
/*
- * This value sets the mask value for the tunnel ivlan id. A value of 0
- * will mask the corresponding bit from compare.
+ * This field represents the build version of network control firmware.
+ * A change in update version represents bug fixes.
*/
- uint16_t t_l2_ivlan_mask;
+ uint8_t netctrl_fw_bld;
- /* This value identifies the type of source of the packet. */
- /* Network port */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT \
- (UINT32_C(0x0) << 0)
- /* Physical function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF \
- (UINT32_C(0x1) << 0)
- /* Virtual function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF \
- (UINT32_C(0x2) << 0)
- /* Virtual NIC of a function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC \
- (UINT32_C(0x3) << 0)
- /* Embedded processor for CFA management */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG \
- (UINT32_C(0x4) << 0)
- /* Embedded processor for OOB management */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE \
- (UINT32_C(0x5) << 0)
- /* Embedded processor for RoCE */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO \
- (UINT32_C(0x6) << 0)
- /* Embedded processor for network proxy functions */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG \
- (UINT32_C(0x7) << 0)
- uint8_t src_type;
+ /*
+ * This field is a reserved field. This field can be used to represent
+ * firmware branches or customer specific releases tied to a specific
+ * (major,minor,update) version
+ */
+ uint8_t netctrl_fw_rsvd;
- uint8_t unused_6;
/*
- * This value is the id of the source. For a network port, it represents
- * port_id. For a physical function, it represents fid. For a virtual
- * function, it represents vf_id. For a vnic, it represents vnic_id. For
- * embedded processors, this id is not valid. Notes: 1. The function ID
- * is implied if it src_id is not provided for a src_type that is either
+ * This field is reserved for future use. The responder should set it to
+ * 0. The requester should ignore this field.
*/
- uint32_t src_id;
+ uint32_t reserved1;
- /* Tunnel Type. */
- /* Non-tunnel */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
- (UINT32_C(0x0) << 0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
- (UINT32_C(0x1) << 0)
- /*
- * Network Virtualization Generic Routing Encapsulation (NVGRE)
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
- (UINT32_C(0x2) << 0)
- /*
- * Generic Routing Encapsulation (GRE) inside Ethernet payload
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
- (UINT32_C(0x3) << 0)
- /* IP in IP */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
- (UINT32_C(0x4) << 0)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- (UINT32_C(0x5) << 0)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
- (UINT32_C(0x6) << 0)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
- (UINT32_C(0x7) << 0)
- /*
- * Generic Routing Encapsulation (GRE) inside IP datagram
- * payload
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
- (UINT32_C(0x8) << 0)
- /* Any tunneled traffic */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
- (UINT32_C(0xff) << 0)
- uint8_t tunnel_type;
+ /*
+ * This field represents the major version of RoCE firmware. A change in
+ * major version represents a major release.
+ */
+ uint8_t roce_fw_maj;
- uint8_t unused_7;
+ /*
+ * This field represents the minor version of RoCE firmware. A change in
+ * minor version represents significant functionality changes.
+ */
+ uint8_t roce_fw_min;
/*
- * If set, this value shall represent the Logical VNIC ID of the
- * destination VNIC for the RX path and network port id of the
- * destination port for the TX path.
+ * This field represents the build version of RoCE firmware. A change in
+ * update version represents bug fixes.
*/
- uint16_t dst_id;
+ uint8_t roce_fw_bld;
- /* Logical VNIC ID of the VNIC where traffic is mirrored. */
- uint16_t mirror_vnic_id;
+ /*
+ * This field is a reserved field. This field can be used to represent
+ * firmware branches or customer specific releases tied to a specific
+ * (major,minor,update) version
+ */
+ uint8_t roce_fw_rsvd;
/*
- * This hint is provided to help in placing the filter in the filter
- * table.
+ * This field represents the name of HWRM FW (ASCII chars with NULL at
+ * the end).
*/
- /* No preference */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
- (UINT32_C(0x0) << 0)
- /* Above the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
- (UINT32_C(0x1) << 0)
- /* Below the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
- (UINT32_C(0x2) << 0)
- /* As high as possible */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \
- (UINT32_C(0x3) << 0)
- /* As low as possible */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \
- (UINT32_C(0x4) << 0)
- uint8_t pri_hint;
+ char hwrm_fw_name[16];
- uint8_t unused_8;
- uint32_t unused_9;
+ /*
+ * This field represents the name of mgmt FW (ASCII chars with NULL at
+ * the end).
+ */
+ char mgmt_fw_name[16];
/*
- * This is the ID of the filter that goes along with the pri_hint. This
- * field is valid only for the following values. 1 - Above the given
- * filter 2 - Below the given filter
+ * This field represents the name of network control firmware (ASCII
+ * chars with NULL at the end).
*/
- uint64_t l2_filter_id_hint;
-} __attribute__((packed));
+ char netctrl_fw_name[16];
-/* Output (24 bytes) */
-struct hwrm_cfa_l2_filter_alloc_output {
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * This field is reserved for future use. The responder should set it to
+ * 0. The requester should ignore this field.
*/
- uint16_t error_code;
+ uint32_t reserved2[4];
- /* This field returns the type of original request. */
- uint16_t req_type;
+ /*
+ * This field represents the name of RoCE FW (ASCII chars with NULL at
+ * the end).
+ */
+ char roce_fw_name[16];
- /* This field provides original sequence number of the command. */
- uint16_t seq_id;
+ /* This field returns the chip number. */
+ uint16_t chip_num;
+
+ /* This field returns the revision of chip. */
+ uint8_t chip_rev;
+
+ /* This field returns the chip metal number. */
+ uint8_t chip_metal;
+
+ /* This field returns the bond id of the chip. */
+ uint8_t chip_bond_id;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * This value indicates the type of platform used for chip
+ * implementation.
*/
- uint16_t resp_len;
+ /* ASIC */
+ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_ASIC \
+ (UINT32_C(0x0) << 0)
+ /* FPGA platform of the chip. */
+ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_FPGA \
+ (UINT32_C(0x1) << 0)
+ /* Palladium platform of the chip. */
+ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM \
+ (UINT32_C(0x2) << 0)
+ uint8_t chip_platform_type;
/*
- * This value identifies a set of CFA data structures used for an L2
- * context.
+ * This field returns the maximum value of request window that is
+ * supported by the HWRM. The request window is mapped into device
+ * address space using MMIO.
*/
- uint64_t l2_filter_id;
+ uint16_t max_req_win_len;
+
+ /* This field returns the maximum value of response buffer in bytes. */
+ uint16_t max_resp_len;
/*
- * This is the ID of the flow associated with this filter. This value
- * shall be used to match and associate the flow identifier returned in
- * completion records. A value of 0xFFFFFFFF shall indicate no flow id.
+ * This field returns the default request timeout value in milliseconds.
*/
- uint32_t flow_id;
+ uint16_t def_req_timeout;
uint8_t unused_0;
uint8_t unused_1;
@@ -1659,14 +1618,23 @@ struct hwrm_cfa_l2_filter_alloc_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_cfa_l2_filter_free */
+
+/* hwrm_func_reset */
/*
- * Description: Free a L2 filter. The HWRM shall free all associated filter
- * resources with the L2 filter.
+ * Description: This command resets a hardware function (PCIe function) and
+ * frees any resources used by the function. This command shall be initiated by
+ * the driver after an FLR has occurred to prepare the function for re-use.
This
+ * command may also be initiated by a driver prior to doing it's own
+ * configuration. This command puts the function into the reset state. In the
+ * reset state, global and port related features of the chip are not available.
+ */
+/*
+ * Note: This command will reset a function that has already been disabled or
+ * idled. The command returns all the resources owned by the function so a new
+ * driver may allocate and configure resources normally.
*/
-
/* Input (24 bytes) */
-struct hwrm_cfa_l2_filter_free_input {
+struct hwrm_func_reset_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -1697,246 +1665,52 @@ struct hwrm_cfa_l2_filter_free_input {
*/
uint64_t resp_addr;
+ /* This bit must be '1' for the vf_id_valid field to be configured. */
+ #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ uint32_t enables;
+
/*
- * This value identifies a set of CFA data structures used for an L2
- * context.
+ * The ID of the VF that this PF is trying to reset. Only the parent PF
+ * shall be allowed to reset a child VF. A parent PF driver shall use
+ * this field only when a specific child VF is requested to be reset.
*/
- uint64_t l2_filter_id;
-} __attribute__((packed));
-
-/* Output (16 bytes) */
-struct hwrm_cfa_l2_filter_free_output {
- /*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
- */
- uint16_t error_code;
-
- /* This field returns the type of original request. */
- uint16_t req_type;
-
- /* This field provides original sequence number of the command. */
- uint16_t seq_id;
-
- /*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
- */
- uint16_t resp_len;
-
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
-
- /*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __attribute__((packed));
-
-/* hwrm_cfa_l2_set_rx_mask */
-/* Description: This command will set rx mask of the function. */
-
-/* Input (40 bytes) */
-struct hwrm_cfa_l2_set_rx_mask_input {
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
- uint16_t req_type;
-
- /*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
- */
- uint16_t cmpl_ring;
-
- /* This value indicates the command sequence number. */
- uint16_t seq_id;
-
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
- */
- uint16_t target_id;
-
- /*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
- */
- uint64_t resp_addr;
-
- /* VNIC ID */
- uint32_t vnic_id;
-
- /* Reserved for future use. */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_RESERVED UINT32_C(0x1)
- /*
- * When this bit is '1', the function is requested to accept multi-cast
- * packets specified by the multicast addr table.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST UINT32_C(0x2)
- /*
- * When this bit is '1', the function is requested to accept all multi-
- * cast packets.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST UINT32_C(0x4)
- /*
- * When this bit is '1', the function is requested to accept broadcast
- * packets.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST UINT32_C(0x8)
- /*
- * When this bit is '1', the function is requested to be put in the
- * promiscuous mode. The HWRM should accept any function to set up
- * promiscuous mode. The HWRM shall follow the semantics below for the
- * promiscuous mode support. # When partitioning is not enabled on a
- * port (i.e. single PF on the port), then the PF shall be allowed to be
- * in the promiscuous mode. When the PF is in the promiscuous mode, then
- * it shall receive all host bound traffic on that port. # When
- * partitioning is enabled on a port (i.e. multiple PFs per port) and a
- * PF on that port is in the promiscuous mode, then the PF receives all
- * traffic within that partition as identified by a unique identifier
- * for the PF (e.g. S-Tag). If a unique outer VLAN for the PF is
- * specified, then the setting of promiscuous mode on that PF shall
- * result in the PF receiving all host bound traffic with matching outer
- * VLAN. # A VF shall can be set in the promiscuous mode. In the
- * promiscuous mode, the VF does not receive any traffic unless a unique
- * outer VLAN for the VF is specified. If a unique outer VLAN for the VF
- * is specified, then the setting of promiscuous mode on that VF shall
- * result in the VF receiving all host bound traffic with the matching
- * outer VLAN. # The HWRM shall allow the setting of promiscuous mode on
- * a function independently from the promiscuous mode settings on other
- * functions.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
- /*
- * If this flag is set, the corresponding RX filters shall be set up to
- * cover multicast/broadcast filters for the outermost Layer 2
- * destination MAC address field.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST UINT32_C(0x20)
- uint32_t mask;
-
- /* This is the address for mcast address tbl. */
- uint64_t mc_tbl_addr;
-
- /*
- * This value indicates how many entries in mc_tbl are valid. Each entry
- * is 6 bytes.
- */
- uint32_t num_mc_entries;
-
- uint32_t unused_0;
-} __attribute__((packed));
-
-/* Output (16 bytes) */
-struct hwrm_cfa_l2_set_rx_mask_output {
- /*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
- */
- uint16_t error_code;
-
- /* This field returns the type of original request. */
- uint16_t req_type;
-
- /* This field provides original sequence number of the command. */
- uint16_t seq_id;
-
- /*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
- */
- uint16_t resp_len;
-
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
-
- /*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __attribute__((packed));
-
-/* hwrm_exec_fwd_resp */
-/*
- * Description: This command is used to send an encapsulated request to the
- * HWRM. This command instructs the HWRM to execute the request and forward the
- * response of the encapsulated request to the location specified in the
- * original request that is encapsulated. The target id of this command shall
be
- * set to 0xFFFF (HWRM). The response location in this command shall be used to
- * acknowledge the receipt of the encapsulated request and forwarding of the
- * response.
- */
-
-/* Input (128 bytes) */
-struct hwrm_exec_fwd_resp_input {
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
- uint16_t req_type;
-
- /*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
- */
- uint16_t cmpl_ring;
-
- /* This value indicates the command sequence number. */
- uint16_t seq_id;
-
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
- */
- uint16_t target_id;
+ uint16_t vf_id;
+ /* This value indicates the level of a function reset. */
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * Reset the caller function and its children VFs (if any). If
+ * no children functions exist, then reset the caller function
+ * only.
*/
- uint64_t resp_addr;
-
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \
+ (UINT32_C(0x0) << 0)
+ /* Reset the caller function only */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \
+ (UINT32_C(0x1) << 0)
/*
- * This is an encapsulated request. This request should be executed by
- * the HWRM and the response should be provided in the response buffer
- * inside the encapsulated request.
+ * Reset all children VFs of the caller function driver if the
+ * caller is a PF driver. It is an error to specify this level
+ * by a VF driver. It is an error to specify this level by a PF
+ * driver with no children VFs.
*/
- uint32_t encap_request[26];
-
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \
+ (UINT32_C(0x2) << 0)
/*
- * This value indicates the target id of the response to the
- * encapsulated request. 0x0 - 0xFFF8 - Used for function ids 0xFFF8 -
- * 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * Reset a specific VF of the caller function driver if the
+ * caller is the parent PF driver. It is an error to specify
+ * this level by a VF driver. It is an error to specify this
+ * level by a PF driver that is not the parent of the VF that is
+ * being requested to reset.
*/
- uint16_t encap_resp_target_id;
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \
+ (UINT32_C(0x3) << 0)
+ uint8_t func_reset_level;
- uint16_t unused_0[3];
+ uint8_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
-struct hwrm_exec_fwd_resp_output {
+struct hwrm_func_reset_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -1979,7 +1753,6 @@ struct hwrm_exec_fwd_resp_output {
* physical function. The output FID value is needed to configure Rings and
* MSI-X vectors so their DMA operations appear correctly on the PCI bus.
*/
-
/* Input (24 bytes) */
struct hwrm_func_qcaps_input {
/*
@@ -2021,6 +1794,7 @@ struct hwrm_func_qcaps_input {
uint16_t unused_0[3];
} __attribute__((packed));
+
/* Output (80 bytes) */
struct hwrm_func_qcaps_output {
/*
@@ -2057,17 +1831,35 @@ struct hwrm_func_qcaps_output {
/* If 1, then Push mode is supported on this function. */
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1)
- /*
- * If 1, then the global MSI-X auto-masking is enabled for the device.
- */
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING \
- UINT32_C(0x2)
+ /* If 1, then the global MSI-X auto-masking is enabled for the device.
*/
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING
UINT32_C(0x2)
/*
* If 1, then the Precision Time Protocol (PTP) processing is supported
* on this function. The HWRM should enable PTP on only a single
* Physical Function (PF) per port.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED UINT32_C(0x4)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED UINT32_C(0x4)
+ /*
+ * If 1, then RDMA over Converged Ethernet (RoCE) v1 is supported on
+ * this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED UINT32_C(0x8)
+ /*
+ * If 1, then RDMA over Converged Ethernet (RoCE) v2 is supported on
+ * this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED UINT32_C(0x10)
+ /*
+ * If 1, then control and configuration of WoL magic packet is supported
+ * on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED \
+ UINT32_C(0x20)
+ /*
+ * If 1, then control and configuration of bitmap pattern packet is
+ * supported on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED UINT32_C(0x40)
uint32_t flags;
/*
@@ -2198,23 +1990,17 @@ struct hwrm_func_qcaps_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_func_reset */
+/* hwrm_func_qcfg */
/*
- * Description: This command resets a hardware function (PCIe function) and
- * frees any resources used by the function. This command shall be initiated by
- * the driver after an FLR has occurred to prepare the function for re-use.
This
- * command may also be initiated by a driver prior to doing it's own
- * configuration. This command puts the function into the reset state. In the
- * reset state, global and port related features of the chip are not available.
- */
-/*
- * Note: This command will reset a function that has already been disabled or
- * idled. The command returns all the resources owned by the function so a new
- * driver may allocate and configure resources normally.
+ * Description: This command returns the current configuration of a function.
+ * The input FID value is used to indicate what function is being queried. This
+ * allows a physical function driver to query virtual functions that are
+ * children of the physical function. The output FID value is needed to
+ * configure Rings and MSI-X vectors so their DMA operations appear correctly
on
+ * the PCI bus.
*/
-
/* Input (24 bytes) */
-struct hwrm_func_reset_input {
+struct hwrm_func_qcfg_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -2245,53 +2031,18 @@ struct hwrm_func_reset_input {
*/
uint64_t resp_addr;
- /* This bit must be '1' for the vf_id_valid field to be configured. */
- #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID \
- UINT32_C(0x1)
- uint32_t enables;
-
/*
- * The ID of the VF that this PF is trying to reset. Only the parent PF
- * shall be allowed to reset a child VF. A parent PF driver shall use
- * this field only when a specific child VF is requested to be reset.
+ * Function ID of the function that is being queried. 0xFF... (All Fs)
+ * if the query is for the requesting function.
*/
- uint16_t vf_id;
-
- /* This value indicates the level of a function reset. */
- /*
- * Reset the caller function and its children VFs (if any). If
- * no children functions exist, then reset the caller function
- * only.
- */
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \
- (UINT32_C(0x0) << 0)
- /* Reset the caller function only */
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \
- (UINT32_C(0x1) << 0)
- /*
- * Reset all children VFs of the caller function driver if the
- * caller is a PF driver. It is an error to specify this level
- * by a VF driver. It is an error to specify this level by a PF
- * driver with no children VFs.
- */
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \
- (UINT32_C(0x2) << 0)
- /*
- * Reset a specific VF of the caller function driver if the
- * caller is the parent PF driver. It is an error to specify
- * this level by a VF driver. It is an error to specify this
- * level by a PF driver that is not the parent of the VF that is
- * being requested to reset.
- */
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \
- (UINT32_C(0x3) << 0)
- uint8_t func_reset_level;
+ uint16_t fid;
- uint8_t unused_0;
+ uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_func_reset_output {
+
+/* Output (72 bytes) */
+struct hwrm_func_qcfg_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -2311,10 +2062,173 @@ struct hwrm_func_reset_output {
*/
uint16_t resp_len;
- uint32_t unused_0;
+ /*
+ * FID value. This value is used to identify operations on the PCI bus
+ * as belonging to a particular PCI function.
+ */
+ uint16_t fid;
+
+ /*
+ * Port ID of port that this function is associated with. 0xFF... (All
+ * Fs) if this function is not associated with any port.
+ */
+ uint16_t port_id;
+
+ /*
+ * This value is the current VLAN setting for this function. The value
+ * of 0 for this field indicates no priority tagging or VLAN is used.
+ * This VLAN is in 802.1Q tag format.
+ */
+ uint16_t vlan;
+
+ /*
+ * If 1, then magic packet based Out-Of-Box WoL is enabled on the port
+ * associated with this function.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED
UINT32_C(0x1)
+ /*
+ * If 1, then bitmap pattern based Out-Of-Box WoL packet is enabled on
+ * the port associated with this function.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED UINT32_C(0x2)
+ uint16_t flags;
+
+ /*
+ * This value is current MAC address configured for this function. A
+ * value of 00-00-00-00-00-00 indicates no MAC address is currently
+ * configured.
+ */
+ uint8_t mac_address[6];
+
+ /*
+ * This value is current PCI ID of this function. If ARI is enabled,
+ * then it is Bus Number (8b):Function Number(8b). Otherwise, it is Bus
+ * Number (8b):Device Number (4b):Function Number(4b).
+ */
+ uint16_t pci_id;
+
+ /* The number of RSS/COS contexts currently allocated to the function.
*/
+ uint16_t alloc_rsscos_ctx;
+
+ /*
+ * The number of completion rings currently allocated to the function.
+ * This does not include the rings allocated to any children functions
+ * if any.
+ */
+ uint16_t alloc_cmpl_rings;
+
+ /*
+ * The number of transmit rings currently allocated to the function.
+ * This does not include the rings allocated to any children functions
+ * if any.
+ */
+ uint16_t alloc_tx_rings;
+
+ /*
+ * The number of receive rings currently allocated to the function. This
+ * does not include the rings allocated to any children functions if
+ * any.
+ */
+ uint16_t alloc_rx_rings;
+
+ /* The allocated number of L2 contexts to the function. */
+ uint16_t alloc_l2_ctx;
+
+ /* The allocated number of vnics to the function. */
+ uint16_t alloc_vnics;
+
+ /*
+ * The maximum transmission unit of the function. For rings allocated on
+ * this function, this default value is used if ring MTU is not
+ * specified.
+ */
+ uint16_t mtu;
+
+ /*
+ * The maximum receive unit of the function. For vnics allocated on this
+ * function, this default value is used if vnic MRU is not specified.
+ */
+ uint16_t mru;
+
+ /* The statistics context assigned to a function. */
+ uint16_t stat_ctx_id;
+
+ /*
+ * The HWRM shall return Unknown value for this field when this command
+ * is used to query VF's configuration.
+ */
+ /* Single physical function */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF \
+ (UINT32_C(0x0) << 0)
+ /* Multiple physical functions */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS \
+ (UINT32_C(0x1) << 0)
+ /* Network Partitioning 1.0 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 \
+ (UINT32_C(0x2) << 0)
+ /* Network Partitioning 1.5 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 \
+ (UINT32_C(0x3) << 0)
+ /* Network Partitioning 2.0 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 \
+ (UINT32_C(0x4) << 0)
+ /* Unknown */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \
+ (UINT32_C(0xff) << 0)
+ uint8_t port_partition_type;
+
+ uint8_t unused_0;
+
+ /* The default VNIC ID assigned to a function that is being queried. */
+ uint16_t dflt_vnic_id;
+
uint8_t unused_1;
uint8_t unused_2;
+
+ /*
+ * Minimum BW allocated for this function in Mbps. The HWRM will
+ * translate this value into byte counter and time interval used for the
+ * scheduler inside the device. A value of 0 indicates the minimum
+ * bandwidth is not configured.
+ */
+ uint32_t min_bw;
+
+ /*
+ * Maximum BW allocated for this function in Mbps. The HWRM will
+ * translate this value into byte counter and time interval used for the
+ * scheduler inside the device. A value of 0 indicates that the maximum
+ * bandwidth is not configured.
+ */
+ uint32_t max_bw;
+
+ /*
+ * This value indicates the Edge virtual bridge mode for the domain that
+ * this function belongs to.
+ */
+ /* No Edge Virtual Bridging (EVB) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB (UINT32_C(0x0) << 0)
+ /* Virtual Ethernet Bridge (VEB) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB (UINT32_C(0x1) << 0)
+ /* Virtual Ethernet Port Aggregator (VEPA) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA (UINT32_C(0x2) << 0)
+ uint8_t evb_mode;
+
uint8_t unused_3;
+ uint16_t unused_4;
+
+ /*
+ * The number of allocated multicast filters for this function on the RX
+ * side.
+ */
+ uint32_t alloc_mcast_filters;
+
+ /* The number of allocated HW ring groups for this function. */
+ uint32_t alloc_hw_ring_grps;
+
+ uint8_t unused_5;
+
+ uint8_t unused_6;
+ uint8_t unused_7;
/*
* This field is used in Output records to indicate that the output is
@@ -2326,18 +2240,15 @@ struct hwrm_func_reset_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_port_phy_cfg */
+/* hwrm_func_drv_rgtr */
/*
- * Description: This command configures the PHY device for the port. It allows
- * setting of the most generic settings for the PHY. The HWRM shall complete
- * this command as soon as PHY settings are configured. They may not be applied
- * when the command response is provided. A VF driver shall not be allowed to
- * configure PHY using this command. In a network partition mode, a PF driver
- * shall not be allowed to configure PHY using this command.
+ * Description: This command is used by the function driver to register its
+ * information with the HWRM. A function driver shall implement this command. A
+ * function driver shall use this command during the driver initialization
right
+ * after the HWRM version discovery and default ring resources allocation.
*/
-
-/* Input (56 bytes) */
-struct hwrm_port_phy_cfg_input {
+/* Input (80 bytes) */
+struct hwrm_func_drv_rgtr_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -2369,43 +2280,309 @@ struct hwrm_port_phy_cfg_input {
uint64_t resp_addr;
/*
- * When this bit is set to '1', the PHY for the port shall be reset. #
- * If this bit is set to 1, then the HWRM shall reset the PHY after
- * applying PHY configuration changes specified in this command. # In
- * order to guarantee that PHY configuration changes specified in this
- * command take effect, the HWRM client should set this flag to 1. # If
- * this bit is not set to 1, then the HWRM may reset the PHY depending
- * on the current PHY configuration and settings specified in this
- * command.
- */
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY UINT32_C(0x1)
- /*
- * When this bit is set to '1', the link shall be forced to be taken
- * down. # When this bit is set to '1", all other command input settings
- * related to the link speed shall be ignored. Once the link state is
- * forced down, it can be explicitly cleared from that state by setting
- * this flag to '0'. # If this flag is set to '0', then the link shall
- * be cleared from forced down state if the link is in forced down
- * state. There may be conditions (e.g. out-of-band or sideband
- * configuration changes for the link) outside the scope of the HWRM
- * implementation that may clear forced down link state.
+ * When this bit is '1', the function driver is requesting all requests
+ * from its children VF drivers to be forwarded to itself. This flag can
+ * only be set by the PF driver. If a VF driver sets this flag, it
+ * should be ignored by the HWRM.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DOWN UINT32_C(0x2)
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE UINT32_C(0x1)
/*
- * When this bit is set to '1', the link shall be forced to the
- * force_link_speed value. When this bit is set to '1', the HWRM client
- * should not enable any of the auto negotiation related fields
- * represented by auto_XXX fields in this command. When this bit is set
- * to '1' and the HWRM client has enabled a auto_XXX field in this
- * command, then the HWRM shall ignore the enabled auto_XXX field. When
- * this bit is set to zero, the link shall be allowed to autoneg.
+ * When this bit is '1', the function is requesting none of the requests
+ * from its children VF drivers to be forwarded to itself. This flag can
+ * only be set by the PF driver. If a VF driver sets this flag, it
+ * should be ignored by the HWRM.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE UINT32_C(0x4)
- /*
- * When this bit is set to '1', the auto-negotiation process shall be
- * restarted on the link.
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE UINT32_C(0x2)
+ uint32_t flags;
+
+ /* This bit must be '1' for the os_type field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE UINT32_C(0x1)
+ /* This bit must be '1' for the ver field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER UINT32_C(0x2)
+ /* This bit must be '1' for the timestamp field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP UINT32_C(0x4)
+ /* This bit must be '1' for the vf_req_fwd field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_REQ_FWD UINT32_C(0x8)
+ /* This bit must be '1' for the async_event_fwd field to be configured.
*/
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD \
+ UINT32_C(0x10)
+ uint32_t enables;
+
+ /* This value indicates the type of OS. */
+ /* Unknown */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN \
+ (UINT32_C(0x0) << 0)
+ /* Other OS not listed below. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER \
+ (UINT32_C(0x1) << 0)
+ /* MSDOS OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS (UINT32_C(0xe) << 0)
+ /* Windows OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS \
+ (UINT32_C(0x12) << 0)
+ /* Solaris OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS \
+ (UINT32_C(0x1d) << 0)
+ /* Linux OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX (UINT32_C(0x24) << 0)
+ /* FreeBSD OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD \
+ (UINT32_C(0x2a) << 0)
+ /* VMware ESXi OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI (UINT32_C(0x68) << 0)
+ /* Microsoft Windows 8 64-bit OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 (UINT32_C(0x73) << 0)
+ /* Microsoft Windows Server 2012 R2 OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 \
+ (UINT32_C(0x74) << 0)
+ uint16_t os_type;
+
+ /* This is the major version of the driver. */
+ uint8_t ver_maj;
+
+ /* This is the minor version of the driver. */
+ uint8_t ver_min;
+
+ /* This is the update version of the driver. */
+ uint8_t ver_upd;
+
+ uint8_t unused_0;
+ uint16_t unused_1;
+
+ /*
+ * This is a 32-bit timestamp provided by the driver for keep alive. The
+ * timestamp is in multiples of 1ms.
+ */
+ uint32_t timestamp;
+
+ uint32_t unused_2;
+
+ /*
+ * This is a 256-bit bit mask provided by the PF driver for letting the
+ * HWRM know what commands issued by the VF driver to the HWRM should be
+ * forwarded to the PF driver. Nth bit refers to the Nth req_type.
+ * Setting Nth bit to 1 indicates that requests from the VF driver with
+ * req_type equal to N shall be forwarded to the parent PF driver. This
+ * field is not valid for the VF driver.
+ */
+ uint32_t vf_req_fwd[8];
+
+ /*
+ * This is a 256-bit bit mask provided by the function driver (PF or VF
+ * driver) to indicate the list of asynchronous event completions to be
+ * forwarded. Nth bit refers to the Nth event_id. Setting Nth bit to 1
+ * by the function driver shall result in the HWRM forwarding
+ * asynchronous event completion with event_id equal to N. If all bits
+ * are set to 0 (value of 0), then the HWRM shall not forward any
+ * asynchronous event completion to this function driver.
+ */
+ uint32_t async_event_fwd[8];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_drv_rgtr_output {
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG UINT32_C(0x8)
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
+
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t resp_len;
+
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/* hwrm_func_drv_unrgtr */
+/*
+ * Description: This command is used by the function driver to un register with
+ * the HWRM. A function driver shall implement this command. A function driver
+ * shall use this command during the driver unloading.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_drv_unrgtr_input {
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t req_type;
+
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
+
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t resp_addr;
+
+ /*
+ * When this bit is '1', the function driver is notifying the HWRM to
+ * prepare for the shutdown.
+ */
+ #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \
+ UINT32_C(0x1)
+ uint32_t flags;
+
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_drv_unrgtr_output {
+ uint16_t error_code;
+
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+
+ uint8_t unused_1;
+
+ uint8_t unused_2;
+
+ uint8_t unused_3;
+
+ uint8_t valid;
+
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_phy_cfg */
+/*
+ * Description: This command configures the PHY device for the port. It allows
+ * setting of the most generic settings for the PHY. The HWRM shall complete
+ * this command as soon as PHY settings are configured. They may not be applied
+ * when the command response is provided. A VF driver shall not be allowed to
+ * configure PHY using this command. In a network partition mode, a PF driver
+ * shall not be allowed to configure PHY using this command.
+ */
+/* Input (56 bytes) */
+struct hwrm_port_phy_cfg_input {
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t req_type;
+
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
+
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t resp_addr;
+
+ /*
+ * When this bit is set to '1', the PHY for the port shall be reset. #
+ * If this bit is set to 1, then the HWRM shall reset the PHY after
+ * applying PHY configuration changes specified in this command. # In
+ * order to guarantee that PHY configuration changes specified in this
+ * command take effect, the HWRM client should set this flag to 1. # If
+ * this bit is not set to 1, then the HWRM may reset the PHY depending
+ * on the current PHY configuration and settings specified in this
+ * command.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', the link shall be forced to be taken
+ * down. # When this bit is set to '1", all other command input settings
+ * related to the link speed shall be ignored. Once the link state is
+ * forced down, it can be explicitly cleared from that state by setting
+ * this flag to '0'. # If this flag is set to '0', then the link shall
+ * be cleared from forced down state if the link is in forced down
+ * state. There may be conditions (e.g. out-of-band or sideband
+ * configuration changes for the link) outside the scope of the HWRM
+ * implementation that may clear forced down link state.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DOWN UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', the link shall be forced to the
+ * force_link_speed value. When this bit is set to '1', the HWRM client
+ * should not enable any of the auto negotiation related fields
+ * represented by auto_XXX fields in this command. When this bit is set
+ * to '1' and the HWRM client has enabled a auto_XXX field in this
+ * command, then the HWRM shall ignore the enabled auto_XXX field. When
+ * this bit is set to zero, the link shall be allowed to autoneg.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', the auto-negotiation process shall be
+ * restarted on the link.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG UINT32_C(0x8)
/*
* When this bit is set to '1', Energy Efficient Ethernet (EEE) is
* requested to be enabled on this link. If EEE is not supported on this
@@ -2424,25 +2601,79 @@ struct hwrm_port_phy_cfg_input {
* on this port, then this flag shall be ignored by the HWRM. If EEE is
* disabled on this port, then this flag shall be ignored by the HWRM.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI UINT32_C(0x40)
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE UINT32_C(0x40)
+ /*
+ * When this bit is set to '1' and EEE is enabled on this link, then TX
+ * LPI is requested to be disabled on the link. If EEE is not supported
+ * on this port, then this flag shall be ignored by the HWRM. If EEE is
+ * disabled on this port, then this flag shall be ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE \
+ UINT32_C(0x80)
+ /*
+ * When set to 1, then the HWRM shall enable FEC autonegotitation on
+ * this port if supported. When set to 0, then this flag shall be
+ * ignored. If FEC autonegotiation is not supported, then the HWRM shall
+ * ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE \
+ UINT32_C(0x100)
+ /*
+ * When set to 1, then the HWRM shall disable FEC autonegotiation on
+ * this port if supported. When set to 0, then this flag shall be
+ * ignored. If FEC autonegotiation is not supported, then the HWRM shall
+ * ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE \
+ UINT32_C(0x200)
+ /*
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire Code)
+ * on this port if supported. When set to 0, then this flag shall be
+ * ignored. If FEC CLAUSE 74 is not supported, then the HWRM shall
+ * ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE \
+ UINT32_C(0x400)
+ /*
+ * When set to 1, then the HWRM shall disable FEC CLAUSE 74 (Fire Code)
+ * on this port if supported. When set to 0, then this flag shall be
+ * ignored. If FEC CLAUSE 74 is not supported, then the HWRM shall
+ * ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \
+ UINT32_C(0x800)
+ /*
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed
+ * Solomon) on this port if supported. When set to 0, then this flag
+ * shall be ignored. If FEC CLAUSE 91 is not supported, then the HWRM
+ * shall ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \
+ UINT32_C(0x1000)
+ /*
+ * When set to 1, then the HWRM shall disable FEC CLAUSE 91 (Reed
+ * Solomon) on this port if supported. When set to 0, then this flag
+ * shall be ignored. If FEC CLAUSE 91 is not supported, then the HWRM
+ * shall ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \
+ UINT32_C(0x2000)
uint32_t flags;
/* This bit must be '1' for the auto_mode field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE UINT32_C(0x1)
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE UINT32_C(0x1)
/* This bit must be '1' for the auto_duplex field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX UINT32_C(0x2)
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX UINT32_C(0x2)
/* This bit must be '1' for the auto_pause field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE UINT32_C(0x4)
- /*
- * This bit must be '1' for the auto_link_speed field to be configured.
- */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED UINT32_C(0x8)
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE UINT32_C(0x4)
+ /* This bit must be '1' for the auto_link_speed field to be configured.
*/
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED UINT32_C(0x8)
/*
* This bit must be '1' for the auto_link_speed_mask field to be
* configured.
*/
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK \
- UINT32_C(0x10)
+ UINT32_C(0x10)
/* This bit must be '1' for the wirespeed field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIRESPEED UINT32_C(0x20)
/* This bit must be '1' for the lpbk field to be configured. */
@@ -2456,7 +2687,7 @@ struct hwrm_port_phy_cfg_input {
* configured.
*/
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK \
- UINT32_C(0x200)
+ UINT32_C(0x200)
/* This bit must be '1' for the tx_lpi_timer field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER UINT32_C(0x400)
uint32_t enables;
@@ -2468,37 +2699,37 @@ struct hwrm_port_phy_cfg_input {
* This is the speed that will be used if the force bit is '1'. If
* unsupported speed is selected, an error will be generated.
*/
- /* 100Mb link speed */
+ /* 100Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB \
(UINT32_C(0x1) << 0)
- /* 1Gb link speed */
+ /* 1Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB \
(UINT32_C(0xa) << 0)
- /* 2Gb link speed */
+ /* 2Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB \
(UINT32_C(0x14) << 0)
- /* 2.5Gb link speed */
+ /* 2.5Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB \
(UINT32_C(0x19) << 0)
- /* 10Gb link speed */
+ /* 10Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB \
(UINT32_C(0x64) << 0)
- /* 20Mb link speed */
+ /* 20Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB \
(UINT32_C(0xc8) << 0)
- /* 25Gb link speed */
+ /* 25Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB \
(UINT32_C(0xfa) << 0)
- /* 40Gb link speed */
+ /* 40Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB \
(UINT32_C(0x190) << 0)
- /* 50Gb link speed */
+ /* 50Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB \
(UINT32_C(0x1f4) << 0)
- /* 100Gb link speed */
+ /* 100Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB \
(UINT32_C(0x3e8) << 0)
- /* 10Mb link speed */
+ /* 10Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB \
(UINT32_C(0xffff) << 0)
uint16_t force_link_speed;
@@ -2507,31 +2738,29 @@ struct hwrm_port_phy_cfg_input {
* This value is used to identify what autoneg mode is used when the
* link speed is not being forced.
*/
- /*
- * Disable autoneg or autoneg disabled. No speeds are selected.
- */
+ /* Disable autoneg or autoneg disabled. No speeds are selected. */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE (UINT32_C(0x0) << 0)
- /* Select all possible speeds for autoneg mode. */
+ /* Select all possible speeds for autoneg mode. */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS \
(UINT32_C(0x1) << 0)
- /*
- * Select only the auto_link_speed speed for autoneg mode. This
- * mode has been DEPRECATED. An HWRM client should not use this
- * mode.
- */
+ /*
+ * Select only the auto_link_speed speed for autoneg mode. This
+ * mode has been DEPRECATED. An HWRM client should not use this
+ * mode.
+ */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED \
(UINT32_C(0x2) << 0)
- /*
- * Select the auto_link_speed or any speed below that speed for
- * autoneg. This mode has been DEPRECATED. An HWRM client should
- * not use this mode.
- */
+ /*
+ * Select the auto_link_speed or any speed below that speed for
+ * autoneg. This mode has been DEPRECATED. An HWRM client should
+ * not use this mode.
+ */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW \
(UINT32_C(0x3) << 0)
- /*
- * Select the speeds based on the corresponding link speed mask
- * value that is provided.
- */
+ /*
+ * Select the speeds based on the corresponding link speed mask
+ * value that is provided.
+ */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK \
(UINT32_C(0x4) << 0)
uint8_t auto_mode;
@@ -2540,13 +2769,13 @@ struct hwrm_port_phy_cfg_input {
* This is the duplex setting that will be used if the autoneg_mode is
* "one_speed" or "one_or_below".
*/
- /* Half Duplex will be requested. */
+ /* Half Duplex will be requested. */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF \
(UINT32_C(0x0) << 0)
- /* Full duplex will be requested. */
+ /* Full duplex will be requested. */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL \
(UINT32_C(0x1) << 0)
- /* Both Half and Full dupex will be requested. */
+ /* Both Half and Full dupex will be requested. */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH \
(UINT32_C(0x2) << 0)
uint8_t auto_duplex;
@@ -2559,12 +2788,12 @@ struct hwrm_port_phy_cfg_input {
* When this bit is '1', Generation of tx pause messages has been
* requested. Disabled otherwise.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX UINT32_C(0x1)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX UINT32_C(0x1)
/*
* When this bit is '1', Reception of rx pause messages has been
* requested. Disabled otherwise.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX UINT32_C(0x2)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX UINT32_C(0x2)
/*
* When set to 1, the advertisement of pause is enabled. # When the
* auto_mode is not set to none and this flag is set to 1, then the
@@ -2576,7 +2805,8 @@ struct hwrm_port_phy_cfg_input {
* forced. # When the auto_mode is set to none and this flag is set to
* 1, auto_pause bits should be ignored and should be set to 0.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE \
+ UINT32_C(0x4)
uint8_t auto_pause;
uint8_t unused_0;
@@ -2586,37 +2816,37 @@ struct hwrm_port_phy_cfg_input {
* "one_speed" or "one_or_below". If an unsupported speed is selected,
* an error will be generated.
*/
- /* 100Mb link speed */
+ /* 100Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB \
(UINT32_C(0x1) << 0)
- /* 1Gb link speed */
+ /* 1Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB \
(UINT32_C(0xa) << 0)
- /* 2Gb link speed */
+ /* 2Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB \
(UINT32_C(0x14) << 0)
- /* 2.5Gb link speed */
+ /* 2.5Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB \
(UINT32_C(0x19) << 0)
- /* 10Gb link speed */
+ /* 10Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB \
(UINT32_C(0x64) << 0)
- /* 20Mb link speed */
+ /* 20Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB \
(UINT32_C(0xc8) << 0)
- /* 25Gb link speed */
+ /* 25Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB \
(UINT32_C(0xfa) << 0)
- /* 40Gb link speed */
+ /* 40Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB \
(UINT32_C(0x190) << 0)
- /* 50Gb link speed */
+ /* 50Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB \
(UINT32_C(0x1f4) << 0)
- /* 100Gb link speed */
+ /* 100Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB \
(UINT32_C(0x3e8) << 0)
- /* 10Mb link speed */
+ /* 10Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB \
(UINT32_C(0xffff) << 0)
uint16_t auto_link_speed;
@@ -2656,8 +2886,8 @@ struct hwrm_port_phy_cfg_input {
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB \
UINT32_C(0x200)
/* 50Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB \
- UINT32_C(0x400)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB \
+ INT32_C(0x400)
/* 100Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB \
UINT32_C(0x800)
@@ -2670,25 +2900,25 @@ struct hwrm_port_phy_cfg_input {
uint16_t auto_link_speed_mask;
/* This value controls the wirespeed feature. */
- /* Wirespeed feature is disabled. */
+ /* Wirespeed feature is disabled. */
#define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_OFF (UINT32_C(0x0) << 0)
- /* Wirespeed feature is enabled. */
+ /* Wirespeed feature is enabled. */
#define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_ON (UINT32_C(0x1) << 0)
uint8_t wirespeed;
/* This value controls the loopback setting for the PHY. */
- /* No loopback is selected. Normal operation. */
+ /* No loopback is selected. Normal operation. */
#define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE (UINT32_C(0x0) << 0)
- /*
- * The HW will be configured with local loopback such that host
- * data is sent back to the host without modification.
- */
+ /*
+ * The HW will be configured with local loopback such that host
+ * data is sent back to the host without modification.
+ */
#define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL (UINT32_C(0x1) << 0)
- /*
- * The HW will be configured with remote loopback such that port
- * logic will send packets back out the transmitter that are
- * received.
- */
+ /*
+ * The HW will be configured with remote loopback such that port
+ * logic will send packets back out the transmitter that are
+ * received.
+ */
#define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE (UINT32_C(0x2) << 0)
uint8_t lpbk;
@@ -2700,12 +2930,12 @@ struct hwrm_port_phy_cfg_input {
* When this bit is '1', Generation of tx pause messages is supported.
* Disabled otherwise.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1)
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1)
/*
* When this bit is '1', Reception of rx pause messages is supported.
* Disabled otherwise.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2)
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2)
uint8_t force_pause;
uint8_t unused_1;
@@ -2726,22 +2956,26 @@ struct hwrm_port_phy_cfg_input {
* at least one speed shall be provided in this mask.
*/
/* Reserved */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 UINT32_C(0x1)
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 \
+ UINT32_C(0x1)
/* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB UINT32_C(0x2)
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
/* Reserved */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 UINT32_C(0x4)
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 \
+ UINT32_C(0x4)
/* 1Gb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB UINT32_C(0x8)
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
/* Reserved */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 \
- UINT32_C(0x10)
+ UINT32_C(0x10)
/* Reserved */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 \
- UINT32_C(0x20)
+ UINT32_C(0x20)
/* 10Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB \
- UINT32_C(0x40)
+ UINT32_C(0x40)
uint16_t eee_link_speed_mask;
uint8_t unused_2;
@@ -2753,12 +2987,13 @@ struct hwrm_port_phy_cfg_input {
*/
#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK \
UINT32_C(0xffffff)
- #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
+ #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
uint32_t tx_lpi_timer;
uint32_t unused_4;
} __attribute__((packed));
+
/* Output (16 bytes) */
struct hwrm_port_phy_cfg_output {
/*
@@ -2795,10 +3030,10 @@ struct hwrm_port_phy_cfg_output {
uint8_t valid;
} __attribute__((packed));
+
/* hwrm_port_phy_qcfg */
/* Description: This command queries the PHY configuration for the port. */
/* Input (24 bytes) */
-
struct hwrm_port_phy_qcfg_input {
/*
* This value indicates what type of request this is. The format for the
@@ -2836,6 +3071,7 @@ struct hwrm_port_phy_qcfg_input {
uint16_t unused_0[3];
} __attribute__((packed));
+
/* Output (96 bytes) */
struct hwrm_port_phy_qcfg_output {
/*
@@ -2858,56 +3094,56 @@ struct hwrm_port_phy_qcfg_output {
uint16_t resp_len;
/* This value indicates the current link status. */
- /* There is no link or cable detected. */
+ /* There is no link or cable detected. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK (UINT32_C(0x0) << 0)
- /* There is no link, but a cable has been detected. */
+ /* There is no link, but a cable has been detected. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL (UINT32_C(0x1) << 0)
- /* There is a link. */
+ /* There is a link. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK (UINT32_C(0x2) << 0)
uint8_t link;
uint8_t unused_0;
/* This value indicates the current link speed of the connection. */
- /* 100Mb link speed */
+ /* 100Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB \
(UINT32_C(0x1) << 0)
- /* 1Gb link speed */
+ /* 1Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB \
(UINT32_C(0xa) << 0)
- /* 2Gb link speed */
+ /* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB \
(UINT32_C(0x14) << 0)
- /* 2.5Gb link speed */
+ /* 2.5Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB \
(UINT32_C(0x19) << 0)
- /* 10Gb link speed */
+ /* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB \
(UINT32_C(0x64) << 0)
- /* 20Mb link speed */
+ /* 20Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB \
(UINT32_C(0xc8) << 0)
- /* 25Gb link speed */
+ /* 25Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB \
(UINT32_C(0xfa) << 0)
- /* 40Gb link speed */
+ /* 40Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB \
(UINT32_C(0x190) << 0)
- /* 50Gb link speed */
+ /* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB \
(UINT32_C(0x1f4) << 0)
- /* 100Gb link speed */
+ /* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB \
(UINT32_C(0x3e8) << 0)
- /* 10Mb link speed */
+ /* 10Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB \
(UINT32_C(0xffff) << 0)
uint16_t link_speed;
/* This value is indicates the duplex of the current connection. */
- /* Half Duplex connection. */
+ /* Half Duplex connection. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_HALF (UINT32_C(0x0) << 0)
- /* Full duplex connection. */
+ /* Full duplex connection. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_FULL (UINT32_C(0x1) << 0)
uint8_t duplex;
@@ -2936,112 +3172,97 @@ struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD \
UINT32_C(0x1)
/* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB \
- UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB UINT32_C(0x2)
/* 1Gb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD \
- UINT32_C(0x4)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD UINT32_C(0x4)
/* 1Gb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB \
- UINT32_C(0x8)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB UINT32_C(0x8)
/* 2Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB \
- UINT32_C(0x10)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB UINT32_C(0x10)
/* 2.5Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB \
- UINT32_C(0x20)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB UINT32_C(0x20)
/* 10Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB \
- UINT32_C(0x40)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB UINT32_C(0x40)
/* 20Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB \
- UINT32_C(0x80)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB UINT32_C(0x80)
/* 25Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB \
- UINT32_C(0x100)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB UINT32_C(0x100)
/* 40Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB \
- UINT32_C(0x200)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB UINT32_C(0x200)
/* 50Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB \
- UINT32_C(0x400)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB UINT32_C(0x400)
/* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB \
- UINT32_C(0x800)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB UINT32_C(0x800)
/* 10Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD \
- UINT32_C(0x1000)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD UINT32_C(0x1000)
/* 10Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB \
- UINT32_C(0x2000)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB UINT32_C(0x2000)
uint16_t support_speeds;
/*
* Current setting of forced link speed. When the link speed is not
* being forced, this value shall be set to 0.
*/
- /* 100Mb link speed */
+ /* 100Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB \
(UINT32_C(0x1) << 0)
- /* 1Gb link speed */
+ /* 1Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB \
(UINT32_C(0xa) << 0)
- /* 2Gb link speed */
+ /* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB \
(UINT32_C(0x14) << 0)
- /* 2.5Gb link speed */
+ /* 2.5Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB \
(UINT32_C(0x19) << 0)
- /* 10Gb link speed */
+ /* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB \
(UINT32_C(0x64) << 0)
- /* 20Mb link speed */
+ /* 20Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB \
(UINT32_C(0xc8) << 0)
- /* 25Gb link speed */
+ /* 25Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB \
(UINT32_C(0xfa) << 0)
- /* 40Gb link speed */
+ /* 40Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB \
(UINT32_C(0x190) << 0)
- /* 50Gb link speed */
+ /* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB \
(UINT32_C(0x1f4) << 0)
- /* 100Gb link speed */
+ /* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB \
(UINT32_C(0x3e8) << 0)
- /* 10Mb link speed */
+ /* 10Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB \
(UINT32_C(0xffff) << 0)
uint16_t force_link_speed;
/* Current setting of auto negotiation mode. */
- /*
- * Disable autoneg or autoneg disabled. No speeds are selected.
- */
+ /* Disable autoneg or autoneg disabled. No speeds are selected. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE \
(UINT32_C(0x0) << 0)
- /* Select all possible speeds for autoneg mode. */
+ /* Select all possible speeds for autoneg mode. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS \
(UINT32_C(0x1) << 0)
- /*
- * Select only the auto_link_speed speed for autoneg mode. This
- * mode has been DEPRECATED. An HWRM client should not use this
- * mode.
- */
+ /*
+ * Select only the auto_link_speed speed for autoneg mode. This
+ * mode has been DEPRECATED. An HWRM client should not use this
+ * mode.
+ */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED \
(UINT32_C(0x2) << 0)
- /*
- * Select the auto_link_speed or any speed below that speed for
- * autoneg. This mode has been DEPRECATED. An HWRM client should
- * not use this mode.
- */
+ /*
+ * Select the auto_link_speed or any speed below that speed for
+ * autoneg. This mode has been DEPRECATED. An HWRM client should
+ * not use this mode.
+ */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW \
(UINT32_C(0x3) << 0)
- /*
- * Select the speeds based on the corresponding link speed mask
- * value that is provided.
- */
+ /*
+ * Select the speeds based on the corresponding link speed mask
+ * value that is provided.
+ */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK \
(UINT32_C(0x4) << 0)
uint8_t auto_mode;
@@ -3079,37 +3300,37 @@ struct hwrm_port_phy_qcfg_output {
* Current setting for auto_link_speed. This field is only valid when
* auto_mode is set to "one_speed" or "one_or_below".
*/
- /* 100Mb link speed */
+ /* 100Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB \
(UINT32_C(0x1) << 0)
- /* 1Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB \
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1G \
(UINT32_C(0xa) << 0)
- /* 2Gb link speed */
+ /* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB \
(UINT32_C(0x14) << 0)
- /* 2.5Gb link speed */
+ /* 2.5Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB \
(UINT32_C(0x19) << 0)
- /* 10Gb link speed */
+ /* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB \
(UINT32_C(0x64) << 0)
- /* 20Mb link speed */
+ /* 20Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB \
(UINT32_C(0xc8) << 0)
- /* 25Gb link speed */
+ /* 25Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB \
(UINT32_C(0xfa) << 0)
- /* 40Gb link speed */
+ /* 40Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB \
(UINT32_C(0x190) << 0)
- /* 50Gb link speed */
+ /* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB \
(UINT32_C(0x1f4) << 0)
- /* 100Gb link speed */
+ /* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB \
(UINT32_C(0x3e8) << 0)
- /* 10Mb link speed */
+ /* 10Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB \
(UINT32_C(0xffff) << 0)
uint16_t auto_link_speed;
@@ -3165,25 +3386,25 @@ struct hwrm_port_phy_qcfg_output {
uint16_t auto_link_speed_mask;
/* Current setting for wirespeed. */
- /* Wirespeed feature is disabled. */
+ /* Wirespeed feature is disabled. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_OFF (UINT32_C(0x0) << 0)
- /* Wirespeed feature is enabled. */
+ /* Wirespeed feature is enabled. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_ON (UINT32_C(0x1) << 0)
uint8_t wirespeed;
/* Current setting for loopback. */
- /* No loopback is selected. Normal operation. */
+ /* No loopback is selected. Normal operation. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE (UINT32_C(0x0) << 0)
- /*
- * The HW will be configured with local loopback such that host
- * data is sent back to the host without modification.
- */
+ /*
+ * The HW will be configured with local loopback such that host
+ * data is sent back to the host without modification.
+ */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL (UINT32_C(0x1) << 0)
- /*
- * The HW will be configured with remote loopback such that port
- * logic will send packets back out the transmitter that are
- * received.
- */
+ /*
+ * The HW will be configured with remote loopback such that port
+ * logic will send packets back out the transmitter that are
+ * received.
+ */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE (UINT32_C(0x2) << 0)
uint8_t lpbk;
@@ -3195,36 +3416,34 @@ struct hwrm_port_phy_qcfg_output {
* When this bit is '1', Generation of tx pause messages is supported.
* Disabled otherwise.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX \
- UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX UINT32_C(0x1)
/*
* When this bit is '1', Reception of rx pause messages is supported.
* Disabled otherwise.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX \
- UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX UINT32_C(0x2)
uint8_t force_pause;
/*
* This value indicates the current status of the optics module on this
* port.
*/
- /* Module is inserted and accepted */
+ /* Module is inserted and accepted */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE \
(UINT32_C(0x0) << 0)
- /* Module is rejected and transmit side Laser is disabled. */
+ /* Module is rejected and transmit side Laser is disabled. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX \
(UINT32_C(0x1) << 0)
- /* Module mismatch warning. */
+ /* Module mismatch warning. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG \
(UINT32_C(0x2) << 0)
- /* Module is rejected and powered down. */
+ /* Module is rejected and powered down. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN \
(UINT32_C(0x3) << 0)
- /* Module is not inserted. */
+ /* Module is not inserted. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \
(UINT32_C(0x4) << 0)
- /* Module status is not applicable. */
+ /* Module status is not applicable. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \
(UINT32_C(0xff) << 0)
uint8_t module_status;
@@ -3242,60 +3461,60 @@ struct hwrm_port_phy_qcfg_output {
uint8_t phy_bld;
/* This value represents a PHY type. */
- /* Unknown */
+ /* Unknown */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN \
(UINT32_C(0x0) << 0)
- /* BASE-CR */
+ /* BASE-CR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR \
(UINT32_C(0x1) << 0)
- /* BASE-KR4 (Deprecated) */
+ /* BASE-KR4 (Deprecated) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 \
(UINT32_C(0x2) << 0)
- /* BASE-LR */
+ /* BASE-LR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR \
(UINT32_C(0x3) << 0)
- /* BASE-SR */
+ /* BASE-SR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR \
(UINT32_C(0x4) << 0)
- /* BASE-KR2 (Deprecated) */
+ /* BASE-KR2 (Deprecated) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 \
(UINT32_C(0x5) << 0)
- /* BASE-KX */
+ /* BASE-KX */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX \
(UINT32_C(0x6) << 0)
- /* BASE-KR */
+ /* BASE-KR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR \
(UINT32_C(0x7) << 0)
- /* BASE-T */
+ /* BASE-T */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET \
(UINT32_C(0x8) << 0)
- /* EEE capable BASE-T */
+ /* EEE capable BASE-T */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE \
(UINT32_C(0x9) << 0)
- /* SGMII connected external PHY */
+ /* SGMII connected external PHY */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY \
(UINT32_C(0xa) << 0)
uint8_t phy_type;
/* This value represents a media type. */
- /* Unknown */
+ /* Unknown */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN \
(UINT32_C(0x0) << 0)
- /* Twisted Pair */
+ /* Twisted Pair */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP (UINT32_C(0x1) << 0)
- /* Direct Attached Copper */
+ /* Direct Attached Copper */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC \
(UINT32_C(0x2) << 0)
- /* Fiber */
+ /* Fiber */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE \
(UINT32_C(0x3) << 0)
uint8_t media_type;
/* This value represents a transceiver type. */
- /* PHY and MAC are in the same package */
+ /* PHY and MAC are in the same package */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \
(UINT32_C(0x1) << 0)
- /* PHY and MAC are in different packages */
+ /* PHY and MAC are in different packages */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \
(UINT32_C(0x2) << 0)
uint8_t xcvr_pkg_type;
@@ -3342,8 +3561,7 @@ struct hwrm_port_phy_qcfg_output {
* configuration flags are valid only when the auto_mode is not set to
* none (in other words autonegotiation is enabled).
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK \
- UINT32_C(0xe0)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK UINT32_C(0xe0)
#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5
uint8_t eee_config_phy_addr;
@@ -3354,11 +3572,10 @@ struct hwrm_port_phy_qcfg_output {
* autonegotiation capable device is connected to a link parter that is
* not capable of autonegotiation.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT \
- UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1)
/* Reserved field, set to 0 */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_MASK UINT32_C(0xfe)
- #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_SFT 1
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_MASK UINT32_C(0xfe)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_SFT 1
uint8_t parallel_detect;
/*
@@ -3413,34 +3630,35 @@ struct hwrm_port_phy_qcfg_output {
* The advertised autoneg for the port by the link partner. This field
* is deprecated and should be set to 0.
*/
- /*
- * Disable autoneg or autoneg disabled. No speeds are selected.
- */
+ /* Disable autoneg or autoneg disabled. No speeds are selected. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \
(UINT32_C(0x0) << 0)
- /* Select all possible speeds for autoneg mode. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS\
+ /* Select all possible speeds for autoneg mode. */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \
(UINT32_C(0x1) << 0)
- /*
- * Select only the auto_link_speed speed for autoneg mode. This
- * mode has been DEPRECATED. An HWRM client should not use this
- * mode.
- */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \
+ /*
+ * Select only the auto_link_speed speed for autoneg mode. This
+ * mode has been DEPRECATED. An HWRM client should not use this
+ * mode.
+ */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \
(UINT32_C(0x2) << 0)
- /*
- * Select the auto_link_speed or any speed below that speed for
- * autoneg. This mode has been DEPRECATED. An HWRM client should
- * not use this mode.
- */
+ /*
+ * Select the auto_link_speed or any speed below that speed for
+ * autoneg. This mode has been DEPRECATED. An HWRM client should
+ * not use this mode.
+ */
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \
(UINT32_C(0x3) << 0)
- /*
- * Select the speeds based on the corresponding link speed mask
- * value that is provided.
- */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK\
+ /*
+ * Select the speeds based on the corresponding link speed mask
+ * value that is provided.
+ */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \
(UINT32_C(0x4) << 0)
uint8_t link_partner_adv_auto_mode;
@@ -3529,32 +3747,93 @@ struct hwrm_port_phy_qcfg_output {
* only when_eee_enabled flag is set to 1 and tx_lpi_enabled is set to
* 1.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK \
- UINT32_C(0xffffff)
- #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0
- /* This value represents transceiver identifier type. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \
- UINT32_C(0xff000000)
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT \
- 24
- /* Unknown */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \
- (UINT32_C(0x0) << 24)
- /* SFP/SFP+/SFP28 */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \
- (UINT32_C(0x3) << 24)
- /* QSFP */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \
- (UINT32_C(0xc) << 24)
- /* QSFP+ */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \
- (UINT32_C(0xd) << 24)
- /* QSFP28 */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \
- (UINT32_C(0x11) << 24)
- uint32_t xcvr_identifier_type_tx_lpi_timer;
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK \
+ UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0
+ /* This value represents transceiver identifier type. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \
+ (UINT32_C(0x0) << 24)
+ /* SFP/SFP+/SFP28 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \
+ (UINT32_C(0x3) << 24)
+ /* QSFP */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \
+ (UINT32_C(0xc) << 24)
+ /* QSFP+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \
+ (UINT32_C(0xd) << 24)
+ /* QSFP28 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \
+ (UINT32_C(0x11) << 24)
+ uint32_t xcvr_identifier_type_tx_lpi_timer;
+
+ /*
+ * This value represents the current configuration of Forward Error
+ * Correction (FEC) on the port.
+ */
+ /*
+ * When set to 1, then FEC is not supported on this port. If this flag
+ * is set to 1, then all other FEC configuration flags shall be ignored.
+ * When set to 0, then FEC is supported as indicated by other
+ * configuration flags. If no cable is attached and the HWRM does not
+ * yet know the FEC capability, then the HWRM shall set this flag to 1
+ * when reporting FEC capability.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, then FEC autonegotiation is supported on this port.
+ * When set to 0, then FEC autonegotiation is not supported on this
+ * port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * When set to 1, then FEC autonegotiation is enabled on this port. When
+ * set to 0, then FEC autonegotiation is disabled if supported. This
+ * flag should be ignored if FEC autonegotiation is not supported on
+ * this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \
+ UINT32_C(0x4)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on this
+ * port. When set to 0, then FEC CLAUSE 74 (Fire Code) is not supported
+ * on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on this
+ * port. When set to 0, then FEC CLAUSE 74 (Fire Code) is disabled if
+ * supported. This flag should be ignored if FEC CLAUSE 74 is not
+ * supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \
+ UINT32_C(0x10)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported on this
+ * port. When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not
+ * supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \
+ UINT32_C(0x20)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled on this
+ * port. When set to 0, then FEC CLAUSE 91 (Reed Solomon) is disabled if
+ * supported. This flag should be ignored if FEC CLAUSE 91 is not
+ * supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \
+ UINT32_C(0x40)
+ uint16_t fec_cfg;
- uint32_t unused_1;
+ uint8_t unused_1;
+ uint8_t unused_2;
/*
* Up to 16 bytes of null padded ASCII string representing PHY vendor.
@@ -3569,10 +3848,10 @@ struct hwrm_port_phy_qcfg_output {
*/
char phy_vendor_partnumber[16];
- uint32_t unused_2;
- uint8_t unused_3;
+ uint32_t unused_3;
uint8_t unused_4;
uint8_t unused_5;
+ uint8_t unused_6;
/*
* This field is used in Output records to indicate that the output is
@@ -3584,18 +3863,19 @@ struct hwrm_port_phy_qcfg_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_ver_get */
+/* hwrm_queue_qportcfg */
/*
- * Description: This function is called by a driver to determine the HWRM
- * interface version supported by the HWRM firmware, the version of HWRM
- * firmware implementation, the name of HWRM firmware, the versions of other
- * embedded firmwares, and the names of other embedded firmwares, etc. Any
- * interface or firmware version with major = 0, minor = 0, and update = 0
shall
- * be considered an invalid version.
+ * Description: This function is called by a driver to query queue
configuration
+ * of a port. # The HWRM shall at least advertise one queue with lossy service
+ * profile. # The driver shall use this command to query queue ids before
+ * configuring or using any queues. # If a service profile is not set for a
+ * queue, then the driver shall not use that queue without configuring a
service
+ * profile for it. # If the driver is not allowed to configure service
profiles,
+ * then the driver shall only use queues for which service profiles are pre-
+ * configured.
*/
-
/* Input (24 bytes) */
-struct hwrm_ver_get_input {
+struct hwrm_queue_qportcfg_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -3627,37 +3907,31 @@ struct hwrm_ver_get_input {
uint64_t resp_addr;
/*
- * This field represents the major version of HWRM interface
- * specification supported by the driver HWRM implementation. The
- * interface major version is intended to change only when non backward
- * compatible changes are made to the HWRM interface specification.
- */
- uint8_t hwrm_intf_maj;
-
- /*
- * This field represents the minor version of HWRM interface
- * specification supported by the driver HWRM implementation. A change
- * in interface minor version is used to reflect significant backward
- * compatible modification to HWRM interface specification. This can be
- * due to addition or removal of functionality. HWRM interface
- * specifications with the same major version but different minor
- * versions are compatible.
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
*/
- uint8_t hwrm_intf_min;
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
+ uint32_t flags;
/*
- * This field represents the update version of HWRM interface
- * specification supported by the driver HWRM implementation. The
- * interface update version is used to reflect minor changes or bug
- * fixes to a released HWRM interface specification.
+ * Port ID of port for which the queue configuration is being queried.
+ * This field is only required when sent by IPC.
*/
- uint8_t hwrm_intf_upd;
+ uint16_t port_id;
- uint8_t unused_0[5];
+ uint16_t unused_0;
} __attribute__((packed));
-/* Output (128 bytes) */
-struct hwrm_ver_get_output {
+
+/* Output (32 bytes) */
+struct hwrm_queue_qportcfg_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -3677,224 +3951,260 @@ struct hwrm_ver_get_output {
*/
uint16_t resp_len;
- /*
- * This field represents the major version of HWRM interface
- * specification supported by the HWRM implementation. The interface
- * major version is intended to change only when non backward compatible
- * changes are made to the HWRM interface specification. A HWRM
- * implementation that is compliant with this specification shall
- * provide value of 1 in this field.
- */
- uint8_t hwrm_intf_maj;
+ /* The maximum number of queues that can be configured. */
+ uint8_t max_configurable_queues;
- /*
- * This field represents the minor version of HWRM interface
- * specification supported by the HWRM implementation. A change in
- * interface minor version is used to reflect significant backward
- * compatible modification to HWRM interface specification. This can be
- * due to addition or removal of functionality. HWRM interface
- * specifications with the same major version but different minor
- * versions are compatible. A HWRM implementation that is compliant with
- * this specification shall provide value of 0 in this field.
- */
- uint8_t hwrm_intf_min;
+ /* The maximum number of lossless queues that can be configured. */
+ uint8_t max_configurable_lossless_queues;
/*
- * This field represents the update version of HWRM interface
- * specification supported by the HWRM implementation. The interface
- * update version is used to reflect minor changes or bug fixes to a
- * released HWRM interface specification. A HWRM implementation that is
- * compliant with this specification shall provide value of 1 in this
- * field.
+ * 0 - Not allowed. Non-zero - Allowed. If this value is non-zero, then
+ * the HWRM shall allow the host SW driver to configure queues using
+ * hwrm_queue_cfg.
*/
- uint8_t hwrm_intf_upd;
-
- uint8_t hwrm_intf_rsvd;
+ uint8_t queue_cfg_allowed;
/*
- * This field represents the major version of HWRM firmware. A change in
- * firmware major version represents a major firmware release.
+ * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
+ * the HWRM shall allow the host SW driver to configure queue buffers
+ * using hwrm_queue_buffers_cfg.
*/
- uint8_t hwrm_fw_maj;
+ uint8_t queue_buffers_cfg_allowed;
/*
- * This field represents the minor version of HWRM firmware. A change in
- * firmware minor version represents significant firmware functionality
- * changes.
+ * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
+ * the HWRM shall allow the host SW driver to configure PFC using
+ * hwrm_queue_pfcenable_cfg.
*/
- uint8_t hwrm_fw_min;
+ uint8_t queue_pfcenable_cfg_allowed;
/*
- * This field represents the build version of HWRM firmware. A change in
- * firmware build version represents bug fixes to a released firmware.
+ * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
+ * the HWRM shall allow the host SW driver to configure Priority to CoS
+ * mapping using hwrm_queue_pri2cos_cfg.
*/
- uint8_t hwrm_fw_bld;
+ uint8_t queue_pri2cos_cfg_allowed;
/*
- * This field is a reserved field. This field can be used to represent
- * firmware branches or customer specific releases tied to a specific
- * (major,minor,update) version of the HWRM firmware.
+ * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
+ * the HWRM shall allow the host SW driver to configure CoS Bandwidth
+ * configuration using hwrm_queue_cos2bw_cfg.
*/
- uint8_t hwrm_fw_rsvd;
+ uint8_t queue_cos2bw_cfg_allowed;
- /*
- * This field represents the major version of mgmt firmware. A change in
- * major version represents a major release.
- */
- uint8_t mgmt_fw_maj;
+ /* ID of CoS Queue 0. FF - Invalid id */
+ uint8_t queue_id0;
- /*
- * This field represents the minor version of mgmt firmware. A change in
- * minor version represents significant functionality changes.
- */
- uint8_t mgmt_fw_min;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \
+ (UINT32_C(0x0) << 0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \
+ (UINT32_C(0x1) << 0)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \
+ (UINT32_C(0xff) << 0)
+ uint8_t queue_id0_service_profile;
- /*
- * This field represents the build version of mgmt firmware. A change in
- * update version represents bug fixes.
- */
- uint8_t mgmt_fw_bld;
+ /* ID of CoS Queue 1. FF - Invalid id */
+ uint8_t queue_id1;
- /*
- * This field is a reserved field. This field can be used to represent
- * firmware branches or customer specific releases tied to a specific
- * (major,minor,update) version
- */
- uint8_t mgmt_fw_rsvd;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \
+ (UINT32_C(0x0) << 0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \
+ (UINT32_C(0x1) << 0)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \
+ (UINT32_C(0xff) << 0)
+ uint8_t queue_id1_service_profile;
- /*
- * This field represents the major version of network control firmware.
- * A change in major version represents a major release.
- */
- uint8_t netctrl_fw_maj;
+ /* ID of CoS Queue 2. FF - Invalid id */
+ uint8_t queue_id2;
- /*
- * This field represents the minor version of network control firmware.
- * A change in minor version represents significant functionality
- * changes.
- */
- uint8_t netctrl_fw_min;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \
+ (UINT32_C(0x0) << 0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \
+ (UINT32_C(0x1) << 0)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \
+ (UINT32_C(0xff) << 0)
+ uint8_t queue_id2_service_profile;
- /*
- * This field represents the build version of network control firmware.
- * A change in update version represents bug fixes.
- */
- uint8_t netctrl_fw_bld;
+ /* ID of CoS Queue 3. FF - Invalid id */
+ uint8_t queue_id3;
- /*
- * This field is a reserved field. This field can be used to represent
- * firmware branches or customer specific releases tied to a specific
- * (major,minor,update) version
- */
- uint8_t netctrl_fw_rsvd;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \
+ (UINT32_C(0x0) << 0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \
+ (UINT32_C(0x1) << 0)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \
+ (UINT32_C(0xff) << 0)
+ uint8_t queue_id3_service_profile;
- /*
- * This field is reserved for future use. The responder should set it to
- * 0. The requester should ignore this field.
- */
- uint32_t reserved1;
+ /* ID of CoS Queue 4. FF - Invalid id */
+ uint8_t queue_id4;
+
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \
+ (UINT32_C(0x0) << 0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \
+ (UINT32_C(0x1) << 0)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \
+ (UINT32_C(0xff) << 0)
+ uint8_t queue_id4_service_profile;
+
+ /* ID of CoS Queue 5. FF - Invalid id */
+ uint8_t queue_id5;
+
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \
+ (UINT32_C(0x0) << 0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \
+ (UINT32_C(0x1) << 0)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \
+ (UINT32_C(0xff) << 0)
+ uint8_t queue_id5_service_profile;
+
+ /* ID of CoS Queue 6. FF - Invalid id */
+ uint8_t queue_id6;
- /*
- * This field represents the major version of RoCE firmware. A change in
- * major version represents a major release.
- */
- uint8_t roce_fw_maj;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \
+ (UINT32_C(0x0) << 0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \
+ (UINT32_C(0x1) << 0)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \
+ (UINT32_C(0xff) << 0)
+ uint8_t queue_id6_service_profile;
- /*
- * This field represents the minor version of RoCE firmware. A change in
- * minor version represents significant functionality changes.
- */
- uint8_t roce_fw_min;
+ /* ID of CoS Queue 7. FF - Invalid id */
+ uint8_t queue_id7;
- /*
- * This field represents the build version of RoCE firmware. A change in
- * update version represents bug fixes.
- */
- uint8_t roce_fw_bld;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \
+ (UINT32_C(0x0) << 0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \
+ (UINT32_C(0x1) << 0)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \
+ (UINT32_C(0xff) << 0)
+ uint8_t queue_id7_service_profile;
/*
- * This field is a reserved field. This field can be used to represent
- * firmware branches or customer specific releases tied to a specific
- * (major,minor,update) version
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
*/
- uint8_t roce_fw_rsvd;
+ uint8_t valid;
+} __attribute__((packed));
+/* hwrm_vnic_alloc */
+/*
+ * Description: This VNIC is a resource in the RX side of the chip that is used
+ * to represent a virtual host "interface". # At the time of VNIC allocation or
+ * configuration, the function can specify whether it wants the requested VNIC
+ * to be the default VNIC for the function or not. # If a function requests
+ * allocation of a VNIC for the first time and a VNIC is successfully allocated
+ * by the HWRM, then the HWRM shall make the allocated VNIC as the default VNIC
+ * for that function. # The default VNIC shall be used for the default action
+ * for a partition or function. # For each VNIC allocated on a function, a
+ * mapping on the RX side to map the allocated VNIC to source virtual interface
+ * shall be performed by the HWRM. This should be hidden to the function driver
+ * requesting the VNIC allocation. This enables broadcast/multicast replication
+ * with source knockout. # If multicast replication with source knockout is
+ * enabled, then the internal VNIC to SVIF mapping data structures shall be
+ * programmed at the time of VNIC allocation.
+ */
+/* Input (24 bytes) */
+struct hwrm_vnic_alloc_input {
/*
- * This field represents the name of HWRM FW (ASCII chars without NULL
- * at the end).
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
*/
- char hwrm_fw_name[16];
+ uint16_t req_type;
/*
- * This field represents the name of mgmt FW (ASCII chars without NULL
- * at the end).
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
*/
- char mgmt_fw_name[16];
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
/*
- * This field represents the name of network control firmware (ASCII
- * chars without NULL at the end).
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
- char netctrl_fw_name[16];
+ uint16_t target_id;
/*
- * This field is reserved for future use. The responder should set it to
- * 0. The requester should ignore this field.
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
*/
- uint32_t reserved2[4];
+ uint64_t resp_addr;
/*
- * This field represents the name of RoCE FW (ASCII chars without NULL
- * at the end).
+ * When this bit is '1', this VNIC is requested to be the default VNIC
+ * for this function.
*/
- char roce_fw_name[16];
-
- /* This field returns the chip number. */
- uint16_t chip_num;
-
- /* This field returns the revision of chip. */
- uint8_t chip_rev;
+ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ uint32_t flags;
- /* This field returns the chip metal number. */
- uint8_t chip_metal;
+ uint32_t unused_0;
+} __attribute__((packed));
- /* This field returns the bond id of the chip. */
- uint8_t chip_bond_id;
+/* Output (16 bytes) */
+struct hwrm_vnic_alloc_output {
/*
- * This value indicates the type of platform used for chip
- * implementation.
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
*/
- /* ASIC */
- #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_ASIC \
- (UINT32_C(0x0) << 0)
- /* FPGA platform of the chip. */
- #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_FPGA \
- (UINT32_C(0x1) << 0)
- /* Palladium platform of the chip. */
- #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM \
- (UINT32_C(0x2) << 0)
- uint8_t chip_platform_type;
+ uint16_t error_code;
- /*
- * This field returns the maximum value of request window that is
- * supported by the HWRM. The request window is mapped into device
- * address space using MMIO.
- */
- uint16_t max_req_win_len;
+ /* This field returns the type of original request. */
+ uint16_t req_type;
- /*
- * This field returns the maximum value of response buffer in bytes. If
- * a request specifies the response buffer length that is greater than
- * this value, then the HWRM should fail it. The value of this field
- * shall be 4KB or more.
- */
- uint16_t max_resp_len;
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
/*
- * This field returns the default request timeout value in milliseconds.
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
*/
- uint16_t def_req_timeout;
+ uint16_t resp_len;
+
+ /* Logical vnic ID */
+ uint32_t vnic_id;
uint8_t unused_0;
uint8_t unused_1;
@@ -3910,20 +4220,15 @@ struct hwrm_ver_get_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_queue_qportcfg */
+
+/* hwrm_vnic_free */
/*
- * Description: This function is called by a driver to query queue
configuration
- * of a port. # The HWRM shall at least advertise one queue with lossy service
- * profile. # The driver shall use this command to query queue ids before
- * configuring or using any queues. # If a service profile is not set for a
- * queue, then the driver shall not use that queue without configuring a
service
- * profile for it. # If the driver is not allowed to configure service
profiles,
- * then the driver shall only use queues for which service profiles are pre-
- * configured.
+ * Description: Free a VNIC resource. Idle any resources associated with the
+ * VNIC as well as the VNIC. Reset and release all resources associated with
the
+ * VNIC.
*/
-
/* Input (24 bytes) */
-struct hwrm_queue_qportcfg_input {
+struct hwrm_vnic_free_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -3954,39 +4259,54 @@ struct hwrm_queue_qportcfg_input {
*/
uint64_t resp_addr;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+
+ uint32_t unused_0;
+} __attribute__((packed));
+
+
+/* Output (16 bytes) */
+struct hwrm_vnic_free_output {
/*
- * Enumeration denoting the RX, TX type of the resource. This
- * enumeration is used for resources that are similar for both TX and RX
- * paths of the chip.
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
*/
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH \
- UINT32_C(0x1)
- /* tx path */
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX \
- (UINT32_C(0x0) << 0)
- /* rx path */
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX \
- (UINT32_C(0x1) << 0)
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \
- HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
- uint32_t flags;
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
/*
- * Port ID of port for which the queue configuration is being queried.
- * This field is only required when sent by IPC.
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
*/
- uint16_t port_id;
+ uint16_t resp_len;
- uint16_t unused_0;
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ uint8_t valid;
} __attribute__((packed));
-/* hwrm_ring_alloc */
-/*
- * Description: This command allocates and does basic preparation for a ring.
- */
-/* Input (80 bytes) */
-struct hwrm_ring_alloc_input {
+/* hwrm_vnic_cfg */
+/* Description: Configure the RX VNIC structure. */
+/* Input (40 bytes) */
+struct hwrm_vnic_cfg_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -4011,149 +4331,100 @@ struct hwrm_ring_alloc_input {
uint16_t target_id;
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
- */
- uint64_t resp_addr;
-
- /* This bit must be '1' for the Reserved1 field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1 UINT32_C(0x1)
- /* This bit must be '1' for the Reserved2 field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED2 UINT32_C(0x2)
- /* This bit must be '1' for the Reserved3 field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3 UINT32_C(0x4)
- /*
- * This bit must be '1' for the stat_ctx_id_valid field to be
- * configured.
- */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID UINT32_C(0x8)
- /* This bit must be '1' for the Reserved4 field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4 UINT32_C(0x10)
- /* This bit must be '1' for the max_bw_valid field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20)
- uint32_t enables;
-
- /* Ring Type. */
- /* Completion Ring (CR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL (UINT32_C(0x0) << 0)
- /* TX Ring (TR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX (UINT32_C(0x1) << 0)
- /* RX Ring (RR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX (UINT32_C(0x2) << 0)
- uint8_t ring_type;
-
- uint8_t unused_0;
- uint16_t unused_1;
-
- /* This value is a pointer to the page table for the Ring. */
- uint64_t page_tbl_addr;
-
- /* First Byte Offset of the first entry in the first page. */
- uint32_t fbo;
-
- /*
- * Actual page size in 2^page_size. The supported range is increments in
- * powers of 2 from 16 bytes to 1GB. - 4 = 16 B Page size is 16 B. - 12
- * = 4 KB Page size is 4 KB. - 13 = 8 KB Page size is 8 KB. - 16 = 64 KB
- * Page size is 64 KB. - 22 = 2 MB Page size is 2 MB. - 23 = 4 MB Page
- * size is 4 MB. - 31 = 1 GB Page size is 1 GB.
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
*/
- uint8_t page_size;
+ uint64_t resp_addr;
/*
- * This value indicates the depth of page table. For this version of the
- * specification, value other than 0 or 1 shall be considered as an
- * invalid value. When the page_tbl_depth = 0, then it is treated as a
- * special case with the following. 1. FBO and page size fields are not
- * valid. 2. page_tbl_addr is the physical address of the first element
- * of the ring.
+ * When this bit is '1', the VNIC is requested to be the default VNIC
+ * for the function.
*/
- uint8_t page_tbl_depth;
-
- uint8_t unused_2;
- uint8_t unused_3;
-
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
/*
- * Number of 16B units in the ring. Minimum size for a ring is 16 16B
- * entries.
+ * When this bit is '1', the VNIC is being configured to strip VLAN in
+ * the RX path. If set to '0', then VLAN stripping is disabled on this
+ * VNIC.
*/
- uint32_t length;
-
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
/*
- * Logical ring number for the ring to be allocated. This value
- * determines the position in the doorbell area where the update to the
- * ring will be made. For completion rings, this value is also the MSI-X
- * vector number for the function the completion ring is associated
- * with.
+ * When this bit is '1', the VNIC is being configured to buffer receive
+ * packets in the hardware until the host posts new receive buffers. If
+ * set to '0', then bd_stall is being configured to be disabled on this
+ * VNIC.
*/
- uint16_t logical_id;
-
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
/*
- * This field is used only when ring_type is a TX ring. This value
- * indicates what completion ring the TX ring is associated with.
+ * When this bit is '1', the VNIC is being configured to receive both
+ * RoCE and non-RoCE traffic. If set to '0', then this VNIC is not
+ * configured to be operating in dual VNIC mode.
*/
- uint16_t cmpl_ring_id;
-
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
/*
- * This field is used only when ring_type is a TX ring. This value
- * indicates what CoS queue the TX ring is associated with.
+ * When this flag is set to '1', the VNIC is requested to be configured
+ * to receive only RoCE traffic. If this flag is set to '0', then this
+ * flag shall be ignored by the HWRM. If roce_dual_vnic_mode flag is set
+ * to '1', then the HWRM client shall not set this flag to '1'.
*/
- uint16_t queue_id;
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
+ uint32_t flags;
- uint8_t unused_4;
- uint8_t unused_5;
+ /*
+ * This bit must be '1' for the dflt_ring_grp field to be configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP UINT32_C(0x1)
+ /* This bit must be '1' for the rss_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE UINT32_C(0x2)
+ /* This bit must be '1' for the cos_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE UINT32_C(0x4)
+ /* This bit must be '1' for the lb_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE UINT32_C(0x8)
+ /* This bit must be '1' for the mru field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU UINT32_C(0x10)
+ uint32_t enables;
- /* This field is reserved for the future use. It shall be set to 0. */
- uint32_t reserved1;
- /* This field is reserved for the future use. It shall be set to 0. */
- uint16_t reserved2;
+ /* Logical vnic ID */
+ uint16_t vnic_id;
- uint8_t unused_6;
- uint8_t unused_7;
- /* This field is reserved for the future use. It shall be set to 0. */
- uint32_t reserved3;
+ /*
+ * Default Completion ring for the VNIC. This ring will be chosen if
+ * packet does not match any RSS rules and if there is no COS rule.
+ */
+ uint16_t dflt_ring_grp;
/*
- * This field is used only when ring_type is a TX ring. This input
- * indicates what statistics context this ring should be associated
- * with.
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if there is no
+ * RSS rule.
*/
- uint32_t stat_ctx_id;
+ uint16_t rss_rule;
- /* This field is reserved for the future use. It shall be set to 0. */
- uint32_t reserved4;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if there is no
+ * COS rule.
+ */
+ uint16_t cos_rule;
/*
- * This field is used only when ring_type is a TX ring. Maximum BW
- * allocated to this TX ring in Mbps. The HWRM will translate this value
- * into byte counter and time interval used for this ring inside the
- * device.
+ * RSS ID for load balancing rule/table structure. 0xFF... (All Fs) if
+ * there is no LB rule.
*/
- uint32_t max_bw;
+ uint16_t lb_rule;
/*
- * This field is used only when ring_type is a Completion ring. This
- * value indicates what interrupt mode should be used on this completion
- * ring. Note: In the legacy interrupt mode, no more than 16 completion
- * rings are allowed.
+ * The maximum receive unit of the vnic. Each vnic is associated with a
+ * function. The vnic mru value overwrites the mru setting of the
+ * associated function. The HWRM shall make sure that vnic mru does not
+ * exceed the mru of the port the function is associated with.
*/
- /* Legacy INTA */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY (UINT32_C(0x0) << 0)
- /* Reserved */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD (UINT32_C(0x1) << 0)
- /* MSI-X */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX (UINT32_C(0x2) << 0)
- /* No Interrupt - Polled mode */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL (UINT32_C(0x3) << 0)
- uint8_t int_mode;
+ uint16_t mru;
- uint8_t unused_8[3];
+ uint32_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_ring_alloc_output {
+/* Output (16 bytes) */
+struct hwrm_vnic_cfg_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -4173,15 +4444,10 @@ struct hwrm_ring_alloc_output {
*/
uint16_t resp_len;
- /* Physical number of ring allocated. */
- uint16_t ring_id;
-
- /* Logical number of ring allocated. */
- uint16_t logical_ring_id;
-
- uint8_t unused_0;
+ uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
+ uint8_t unused_3;
/*
* This field is used in Output records to indicate that the output is
@@ -4193,13 +4459,10 @@ struct hwrm_ring_alloc_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_ring_free */
-/*
- * Description: This command is used to free a ring and associated resources.
- */
-/* Input (24 bytes) */
-
-struct hwrm_ring_free_input {
+/* hwrm_vnic_rss_cfg */
+/* Description: This function is used to enable RSS configuration. */
+/* Input (48 bytes) */
+struct hwrm_vnic_rss_cfg_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -4230,25 +4493,59 @@ struct hwrm_ring_free_input {
*/
uint64_t resp_addr;
- /* Ring Type. */
- /* Completion Ring (CR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_CMPL (UINT32_C(0x0) << 0)
- /* TX Ring (TR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_TX (UINT32_C(0x1) << 0)
- /* RX Ring (RR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_RX (UINT32_C(0x2) << 0)
- uint8_t ring_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed over source and
+ * destination IPv4 addresses of IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv4 addresses and source/destination ports of
+ * TCP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv4 addresses and source/destination ports of
+ * UDP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over source and
+ * destination IPv4 addresses of IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv6 addresses and source/destination ports of
+ * TCP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv6 addresses and source/destination ports of
+ * UDP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ uint32_t hash_type;
- uint8_t unused_0;
+ uint32_t unused_0;
- /* Physical number of ring allocated. */
- uint16_t ring_id;
+ /* This is the address for rss ring group table */
+ uint64_t ring_grp_tbl_addr;
- uint32_t unused_1;
+ /* This is the address for rss hash key table */
+ uint64_t hash_key_tbl_addr;
+
+ /* Index to the rss indirection table. */
+ uint16_t rss_ctx_idx;
+
+ uint16_t unused_1[3];
} __attribute__((packed));
+
/* Output (16 bytes) */
-struct hwrm_ring_free_output {
+struct hwrm_vnic_rss_cfg_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -4283,13 +4580,10 @@ struct hwrm_ring_free_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_ring_grp_alloc */
-/*
- * Description: This API allocates and does basic preparation for a ring group.
- */
-
-/* Input (24 bytes) */
-struct hwrm_ring_grp_alloc_input {
+/* hwrm_vnic_rss_cos_lb_ctx_alloc */
+/* Description: This function is used to allocate COS/Load Balance context. */
+/* Input (16 bytes) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -4319,29 +4613,10 @@ struct hwrm_ring_grp_alloc_input {
* cleared to zero before the request is made.
*/
uint64_t resp_addr;
-
- /* This value identifies the CR associated with the ring group. */
- uint16_t cr;
-
- /* This value identifies the main RR associated with the ring group. */
- uint16_t rr;
-
- /*
- * This value identifies the aggregation RR associated with the ring
- * group. If this value is 0xFF... (All Fs), then no Aggregation ring
- * will be set.
- */
- uint16_t ar;
-
- /*
- * This value identifies the statistics context associated with the ring
- * group.
- */
- uint16_t sc;
} __attribute__((packed));
/* Output (16 bytes) */
-struct hwrm_ring_grp_alloc_output {
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -4361,16 +4636,14 @@ struct hwrm_ring_grp_alloc_output {
*/
uint16_t resp_len;
- /*
- * This is the ring group ID value. Use this value to program the
- * default ring group for the VNIC or as table entries in an RSS/COS
- * context.
- */
- uint32_t ring_group_id;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint16_t rss_cos_lb_ctx_id;
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
/*
* This field is used in Output records to indicate that the output is
@@ -4382,18 +4655,11 @@ struct hwrm_ring_grp_alloc_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_ring_grp_free */
-/*
- * Description: This API frees a ring group and associated resources. # If a
- * ring in the ring group is reset or free, then the associated rings in the
- * ring group shall also be reset/free using hwrm_ring_free. # A function
driver
- * shall always use hwrm_ring_grp_free after freeing all rings in a group. # As
- * a part of executing this command, the HWRM shall reset all associated ring
- * group resources.
- */
+/* hwrm_vnic_rss_cos_lb_ctx_free */
+/* Description: This function can be used to free COS/Load Balance context. */
/* Input (24 bytes) */
-struct hwrm_ring_grp_free_input {
+struct hwrm_vnic_rss_cos_lb_ctx_free_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -4424,14 +4690,15 @@ struct hwrm_ring_grp_free_input {
*/
uint64_t resp_addr;
- /* This is the ring group ID value. */
- uint32_t ring_group_id;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint16_t rss_cos_lb_ctx_id;
- uint32_t unused_0;
+ uint16_t unused_0[3];
} __attribute__((packed));
+
/* Output (16 bytes) */
-struct hwrm_ring_grp_free_output {
+struct hwrm_vnic_rss_cos_lb_ctx_free_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -4466,14 +4733,12 @@ struct hwrm_ring_grp_free_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_stat_ctx_alloc */
+/* hwrm_ring_alloc */
/*
- * Description: This command allocates and does basic preparation for a stat
- * context.
+ * Description: This command allocates and does basic preparation for a ring.
*/
-
-/* Input (32 bytes) */
-struct hwrm_stat_ctx_alloc_input {
+/* Input (80 bytes) */
+struct hwrm_ring_alloc_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -4504,20 +4769,145 @@ struct hwrm_stat_ctx_alloc_input {
*/
uint64_t resp_addr;
- /* This is the address for statistic block. */
- uint64_t stats_dma_addr;
+ /* This bit must be '1' for the Reserved1 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1 UINT32_C(0x1)
+ /* This bit must be '1' for the Reserved2 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED2 UINT32_C(0x2)
+ /* This bit must be '1' for the Reserved3 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3 UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the stat_ctx_id_valid field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID UINT32_C(0x8)
+ /* This bit must be '1' for the Reserved4 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4 UINT32_C(0x10)
+ /* This bit must be '1' for the max_bw_valid field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20)
+ uint32_t enables;
+
+ /* Ring Type. */
+ /* Completion Ring (CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL (UINT32_C(0x0) << 0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX (UINT32_C(0x1) << 0)
+ /* RX Ring (RR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX (UINT32_C(0x2) << 0)
+ uint8_t ring_type;
+
+ uint8_t unused_0;
+ uint16_t unused_1;
+
+ /* This value is a pointer to the page table for the Ring. */
+ uint64_t page_tbl_addr;
+
+ /* First Byte Offset of the first entry in the first page. */
+ uint32_t fbo;
/*
- * The statistic block update period in ms. e.g. 250ms, 500ms, 750ms,
- * 1000ms.
+ * Actual page size in 2^page_size. The supported range is increments in
+ * powers of 2 from 16 bytes to 1GB. - 4 = 16 B Page size is 16 B. - 12
+ * = 4 KB Page size is 4 KB. - 13 = 8 KB Page size is 8 KB. - 16 = 64 KB
+ * Page size is 64 KB. - 21 = 2 MB Page size is 2 MB. - 22 = 4 MB Page
+ * size is 4 MB. - 30 = 1 GB Page size is 1 GB.
*/
- uint32_t update_period_ms;
+ uint8_t page_size;
- uint32_t unused_0;
+ /*
+ * This value indicates the depth of page table. For this version of the
+ * specification, value other than 0 or 1 shall be considered as an
+ * invalid value. When the page_tbl_depth = 0, then it is treated as a
+ * special case with the following. 1. FBO and page size fields are not
+ * valid. 2. page_tbl_addr is the physical address of the first element
+ * of the ring.
+ */
+ uint8_t page_tbl_depth;
+
+ uint8_t unused_2;
+ uint8_t unused_3;
+
+ /*
+ * Number of 16B units in the ring. Minimum size for a ring is 16 16B
+ * entries.
+ */
+ uint32_t length;
+
+ /*
+ * Logical ring number for the ring to be allocated. This value
+ * determines the position in the doorbell area where the update to the
+ * ring will be made. For completion rings, this value is also the MSI-X
+ * vector number for the function the completion ring is associated
+ * with.
+ */
+ uint16_t logical_id;
+
+ /*
+ * This field is used only when ring_type is a TX ring. This value
+ * indicates what completion ring the TX ring is associated with.
+ */
+ uint16_t cmpl_ring_id;
+
+ /*
+ * This field is used only when ring_type is a TX ring. This value
+ * indicates what CoS queue the TX ring is associated with.
+ */
+ uint16_t queue_id;
+
+ uint8_t unused_4;
+ uint8_t unused_5;
+
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint32_t reserved1;
+
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint16_t reserved2;
+
+ uint8_t unused_6;
+ uint8_t unused_7;
+
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint32_t reserved3;
+
+ /*
+ * This field is used only when ring_type is a TX ring. This input
+ * indicates what statistics context this ring should be associated
+ * with.
+ */
+ uint32_t stat_ctx_id;
+
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint32_t reserved4;
+
+ /*
+ * This field is used only when ring_type is a TX ring. Maximum BW
+ * allocated to this TX ring in Mbps. The HWRM will translate this value
+ * into byte counter and time interval used for this ring inside the
+ * device.
+ */
+ uint32_t max_bw;
+
+ /*
+ * This field is used only when ring_type is a Completion ring. This
+ * value indicates what interrupt mode should be used on this completion
+ * ring. Note: In the legacy interrupt mode, no more than 16 completion
+ * rings are allowed.
+ */
+ /* Legacy INTA */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY (UINT32_C(0x0) << 0)
+ /* Reserved */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD (UINT32_C(0x1) << 0)
+ /* MSI-X */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX (UINT32_C(0x2) << 0)
+ /* No Interrupt - Polled mode */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL (UINT32_C(0x3) << 0)
+ uint8_t int_mode;
+
+ uint8_t unused_8[3];
} __attribute__((packed));
+
/* Output (16 bytes) */
-struct hwrm_stat_ctx_alloc_output {
+struct hwrm_ring_alloc_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -4537,8 +4927,11 @@ struct hwrm_stat_ctx_alloc_output {
*/
uint16_t resp_len;
- /* This is the statistics context ID value. */
- uint32_t stat_ctx_id;
+ /* Physical number of ring allocated. */
+ uint16_t ring_id;
+
+ /* Logical number of ring allocated. */
+ uint16_t logical_ring_id;
uint8_t unused_0;
uint8_t unused_1;
@@ -4554,11 +4947,12 @@ struct hwrm_stat_ctx_alloc_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_stat_ctx_clr_stats */
-/* Description: This command clears statistics of a context. */
-
+/* hwrm_ring_free */
+/*
+ * Description: This command is used to free a ring and associated resources.
+ */
/* Input (24 bytes) */
-struct hwrm_stat_ctx_clr_stats_input {
+struct hwrm_ring_free_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -4589,14 +4983,26 @@ struct hwrm_stat_ctx_clr_stats_input {
*/
uint64_t resp_addr;
- /* ID of the statistics context that is being queried. */
- uint32_t stat_ctx_id;
+ /* Ring Type. */
+ /* Completion Ring (CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_CMPL (UINT32_C(0x0) << 0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_TX (UINT32_C(0x1) << 0)
+ /* RX Ring (RR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX (UINT32_C(0x2) << 0)
+ uint8_t ring_type;
- uint32_t unused_0;
+ uint8_t unused_0;
+
+ /* Physical number of ring allocated. */
+ uint16_t ring_id;
+
+ uint32_t unused_1;
} __attribute__((packed));
+
/* Output (16 bytes) */
-struct hwrm_stat_ctx_clr_stats_output {
+struct hwrm_ring_free_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -4631,11 +5037,12 @@ struct hwrm_stat_ctx_clr_stats_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_stat_ctx_free */
-/* Description: This command is used to free a stat context. */
+/* hwrm_ring_grp_alloc */
+/*
+ * Description: This API allocates and does basic preparation for a ring group.
+ */
/* Input (24 bytes) */
-
-struct hwrm_stat_ctx_free_input {
+struct hwrm_ring_grp_alloc_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -4666,15 +5073,29 @@ struct hwrm_stat_ctx_free_input {
*/
uint64_t resp_addr;
- /* ID of the statistics context that is being queried. */
- uint32_t stat_ctx_id;
+ /* This value identifies the CR associated with the ring group. */
+ uint16_t cr;
- uint32_t unused_0;
+ /* This value identifies the main RR associated with the ring group. */
+ uint16_t rr;
+
+ /*
+ * This value identifies the aggregation RR associated with the ring
+ * group. If this value is 0xFF... (All Fs), then no Aggregation ring
+ * will be set.
+ */
+ uint16_t ar;
+
+ /*
+ * This value identifies the statistics context associated with the ring
+ * group.
+ */
+ uint16_t sc;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_stat_ctx_free_output {
+/* Output (16 bytes) */
+struct hwrm_ring_grp_alloc_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -4694,8 +5115,12 @@ struct hwrm_stat_ctx_free_output {
*/
uint16_t resp_len;
- /* This is the statistics context ID value. */
- uint32_t stat_ctx_id;
+ /*
+ * This is the ring group ID value. Use this value to program the
+ * default ring group for the VNIC or as table entries in an RSS/COS
+ * context.
+ */
+ uint32_t ring_group_id;
uint8_t unused_0;
uint8_t unused_1;
@@ -4711,26 +5136,17 @@ struct hwrm_stat_ctx_free_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_vnic_alloc */
+/* hwrm_ring_grp_free */
/*
- * Description: This VNIC is a resource in the RX side of the chip that is used
- * to represent a virtual host "interface". # At the time of VNIC allocation or
- * configuration, the function can specify whether it wants the requested VNIC
- * to be the default VNIC for the function or not. # If a function requests
- * allocation of a VNIC for the first time and a VNIC is successfully allocated
- * by the HWRM, then the HWRM shall make the allocated VNIC as the default VNIC
- * for that function. # The default VNIC shall be used for the default action
- * for a partition or function. # For each VNIC allocated on a function, a
- * mapping on the RX side to map the allocated VNIC to source virtual interface
- * shall be performed by the HWRM. This should be hidden to the function driver
- * requesting the VNIC allocation. This enables broadcast/multicast replication
- * with source knockout. # If multicast replication with source knockout is
- * enabled, then the internal VNIC to SVIF mapping data structures shall be
- * programmed at the time of VNIC allocation.
+ * Description: This API frees a ring group and associated resources. # If a
+ * ring in the ring group is reset or free, then the associated rings in the
+ * ring group shall also be reset/free using hwrm_ring_free. # A function
driver
+ * shall always use hwrm_ring_grp_free after freeing all rings in a group. # As
+ * a part of executing this command, the HWRM shall reset all associated ring
+ * group resources.
*/
-
/* Input (24 bytes) */
-struct hwrm_vnic_alloc_input {
+struct hwrm_ring_grp_free_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -4761,18 +5177,14 @@ struct hwrm_vnic_alloc_input {
*/
uint64_t resp_addr;
- /*
- * When this bit is '1', this VNIC is requested to be the default VNIC
- * for this function.
- */
- #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
- uint32_t flags;
+ /* This is the ring group ID value. */
+ uint32_t ring_group_id;
uint32_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
-struct hwrm_vnic_alloc_output {
+struct hwrm_ring_grp_free_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -4792,12 +5204,10 @@ struct hwrm_vnic_alloc_output {
*/
uint16_t resp_len;
- /* Logical vnic ID */
- uint32_t vnic_id;
-
- uint8_t unused_0;
+ uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
+ uint8_t unused_3;
/*
* This field is used in Output records to indicate that the output is
@@ -4809,11 +5219,15 @@ struct hwrm_vnic_alloc_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_vnic_cfg */
-/* Description: Configure the RX VNIC structure. */
-
-/* Input (40 bytes) */
-struct hwrm_vnic_cfg_input {
+/* hwrm_cfa_l2_filter_alloc */
+/*
+ * A filter is used to identify traffic that contains a matching set of
+ * parameters like unicast or broadcast MAC address or a VLAN tag amongst
+ * other things which then allows the ASIC to direct the incoming traffic
+ * to an appropriate VNIC or Rx ring.
+ */
+/* Input (96 bytes) */
+struct hwrm_cfa_l2_filter_alloc_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -4845,171 +5259,273 @@ struct hwrm_vnic_cfg_input {
uint64_t resp_addr;
/*
- * When this bit is '1', the VNIC is requested to be the default VNIC
- * for the function.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
- /*
- * When this bit is '1', the VNIC is being configured to strip VLAN in
- * the RX path. If set to '0', then VLAN stripping is disabled on this
- * VNIC.
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both TX and RX
+ * paths of the chip.
*/
- #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
+ (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
+ (UINT32_C(0x1) << 0)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
/*
- * When this bit is '1', the VNIC is being configured to buffer receive
- * packets in the hardware until the host posts new receive buffers. If
- * set to '0', then bd_stall is being configured to be disabled on this
- * VNIC.
+ * Setting of this flag indicates the applicability to the loopback
+ * path.
*/
- #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x2)
/*
- * When this bit is '1', the VNIC is being configured to receive both
- * RoCE and non-RoCE traffic. If set to '0', then this VNIC is not
- * configured to be operating in dual VNIC mode.
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
*/
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x4)
/*
- * When this flag is set to '1', the VNIC is requested to be configured
- * to receive only RoCE traffic. If this flag is set to '0', then this
- * flag shall be ignored by the HWRM. If roce_dual_vnic_mode flag is set
- * to '1', then the HWRM client shall not set this flag to '1'.
+ * If this flag is set, all t_l2_* fields are invalid and they should
+ * not be specified. If this flag is set, then l2_* fields refer to
+ * fields of outermost L2 header.
*/
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8)
uint32_t flags;
- /* This bit must be '1' for the dflt_ring_grp field to be configured. */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP UINT32_C(0x1)
- /* This bit must be '1' for the rss_rule field to be configured. */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE UINT32_C(0x2)
- /* This bit must be '1' for the cos_rule field to be configured. */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE UINT32_C(0x4)
- /* This bit must be '1' for the lb_rule field to be configured. */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE UINT32_C(0x8)
- /* This bit must be '1' for the mru field to be configured. */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU UINT32_C(0x10)
+ /* This bit must be '1' for the l2_addr field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1)
+ /* This bit must be '1' for the l2_addr_mask field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
+ UINT32_C(0x2)
+ /* This bit must be '1' for the l2_ovlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN UINT32_C(0x4)
+ /* This bit must be '1' for the l2_ovlan_mask field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
+ UINT32_C(0x8)
+ /* This bit must be '1' for the l2_ivlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN UINT32_C(0x10)
+ /* This bit must be '1' for the l2_ivlan_mask field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
+ UINT32_C(0x20)
+ /* This bit must be '1' for the t_l2_addr field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \
+ UINT32_C(0x40)
+ /* This bit must be '1' for the t_l2_addr_mask field to be configured.
*/
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
+ UINT32_C(0x80)
+ /* This bit must be '1' for the t_l2_ovlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
+ UINT32_C(0x100)
+ /* This bit must be '1' for the t_l2_ovlan_mask field to be configured.
*/
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
+ UINT32_C(0x200)
+ /* This bit must be '1' for the t_l2_ivlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
+ UINT32_C(0x400)
+ /* This bit must be '1' for the t_l2_ivlan_mask field to be configured.
*/
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
+ UINT32_C(0x800)
+ /* This bit must be '1' for the src_type field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \
+ UINT32_C(0x1000)
+ /* This bit must be '1' for the src_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \
+ UINT32_C(0x2000)
+ /* This bit must be '1' for the tunnel_type field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x4000)
+ /* This bit must be '1' for the dst_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
+ UINT32_C(0x8000)
+ /* This bit must be '1' for the mirror_vnic_id field to be configured.
*/
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x10000)
uint32_t enables;
- /* Logical vnic ID */
- uint16_t vnic_id;
-
/*
- * Default Completion ring for the VNIC. This ring will be chosen if
- * packet does not match any RSS rules and if there is no COS rule.
+ * This value sets the match value for the L2 MAC address. Destination
+ * MAC address for RX path. Source MAC address for TX path.
*/
- uint16_t dflt_ring_grp;
+ uint8_t l2_addr[6];
- /*
- * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if there is no
- * RSS rule.
- */
- uint16_t rss_rule;
+ uint8_t unused_0;
+ uint8_t unused_1;
/*
- * RSS ID for COS rule/table structure. 0xFF... (All Fs) if there is no
- * COS rule.
+ * This value sets the mask value for the L2 address. A value of 0 will
+ * mask the corresponding bit from compare.
*/
- uint16_t cos_rule;
+ uint8_t l2_addr_mask[6];
+
+ /* This value sets VLAN ID value for outer VLAN. */
+ uint16_t l2_ovlan;
/*
- * RSS ID for load balancing rule/table structure. 0xFF... (All Fs) if
- * there is no LB rule.
+ * This value sets the mask value for the ovlan id. A value of 0 will
+ * mask the corresponding bit from compare.
*/
- uint16_t lb_rule;
+ uint16_t l2_ovlan_mask;
+
+ /* This value sets VLAN ID value for inner VLAN. */
+ uint16_t l2_ivlan;
/*
- * The maximum receive unit of the vnic. Each vnic is associated with a
- * function. The vnic mru value overwrites the mru setting of the
- * associated function. The HWRM shall make sure that vnic mru does not
- * exceed the mru of the port the function is associated with.
+ * This value sets the mask value for the ivlan id. A value of 0 will
+ * mask the corresponding bit from compare.
*/
- uint16_t mru;
+ uint16_t l2_ivlan_mask;
- uint32_t unused_0;
-} __attribute__((packed));
+ uint8_t unused_2;
+ uint8_t unused_3;
-/* Output (16 bytes) */
-struct hwrm_vnic_cfg_output {
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * This value sets the match value for the tunnel L2 MAC address.
+ * Destination MAC address for RX path. Source MAC address for TX path.
*/
- uint16_t error_code;
-
- /* This field returns the type of original request. */
- uint16_t req_type;
+ uint8_t t_l2_addr[6];
- /* This field provides original sequence number of the command. */
- uint16_t seq_id;
+ uint8_t unused_4;
+ uint8_t unused_5;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * This value sets the mask value for the tunnel L2 address. A value of
+ * 0 will mask the corresponding bit from compare.
*/
- uint16_t resp_len;
+ uint8_t t_l2_addr_mask[6];
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
+ /* This value sets VLAN ID value for tunnel outer VLAN. */
+ uint16_t t_l2_ovlan;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This value sets the mask value for the tunnel ovlan id. A value of 0
+ * will mask the corresponding bit from compare.
*/
- uint8_t valid;
-} __attribute__((packed));
+ uint16_t t_l2_ovlan_mask;
-/* hwrm_vnic_free */
-/*
- * Description: Free a VNIC resource. Idle any resources associated with the
- * VNIC as well as the VNIC. Reset and release all resources associated with
the
- * VNIC.
- */
+ /* This value sets VLAN ID value for tunnel inner VLAN. */
+ uint16_t t_l2_ivlan;
-/* Input (24 bytes) */
-struct hwrm_vnic_free_input {
/*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
+ * This value sets the mask value for the tunnel ivlan id. A value of 0
+ * will mask the corresponding bit from compare.
*/
- uint16_t req_type;
+ uint16_t t_l2_ivlan_mask;
+
+ /* This value identifies the type of source of the packet. */
+ /* Network port */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT \
+ (UINT32_C(0x0) << 0)
+ /* Physical function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF \
+ (UINT32_C(0x1) << 0)
+ /* Virtual function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF \
+ (UINT32_C(0x2) << 0)
+ /* Virtual NIC of a function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC \
+ (UINT32_C(0x3) << 0)
+ /* Embedded processor for CFA management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG \
+ (UINT32_C(0x4) << 0)
+ /* Embedded processor for OOB management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE \
+ (UINT32_C(0x5) << 0)
+ /* Embedded processor for RoCE */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO \
+ (UINT32_C(0x6) << 0)
+ /* Embedded processor for network proxy functions */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG \
+ (UINT32_C(0x7) << 0)
+ uint8_t src_type;
+
+ uint8_t unused_6;
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * This value is the id of the source. For a network port, it represents
+ * port_id. For a physical function, it represents fid. For a virtual
+ * function, it represents vf_id. For a vnic, it represents vnic_id. For
+ * embedded processors, this id is not valid. Notes: 1. The function ID
+ * is implied if it src_id is not provided for a src_type that is either
*/
- uint16_t cmpl_ring;
+ uint32_t src_id;
+
+ /* Tunnel Type. */
+ /* Non-tunnel */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ (UINT32_C(0x0) << 0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ (UINT32_C(0x1) << 0)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ (UINT32_C(0x2) << 0)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ (UINT32_C(0x3) << 0)
+ /* IP in IP */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ (UINT32_C(0x4) << 0)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ (UINT32_C(0x5) << 0)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ (UINT32_C(0x6) << 0)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ (UINT32_C(0x7) << 0)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ (UINT32_C(0x8) << 0)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ (UINT32_C(0xff) << 0)
+ uint8_t tunnel_type;
- /* This value indicates the command sequence number. */
- uint16_t seq_id;
+ uint8_t unused_7;
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * If set, this value shall represent the Logical VNIC ID of the
+ * destination VNIC for the RX path and network port id of the
+ * destination port for the TX path.
*/
- uint16_t target_id;
+ uint16_t dst_id;
+
+ /* Logical VNIC ID of the VNIC where traffic is mirrored. */
+ uint16_t mirror_vnic_id;
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * This hint is provided to help in placing the filter in the filter
+ * table.
*/
- uint64_t resp_addr;
+ /* No preference */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
+ (UINT32_C(0x0) << 0)
+ /* Above the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
+ (UINT32_C(0x1) << 0)
+ /* Below the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
+ (UINT32_C(0x2) << 0)
+ /* As high as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \
+ (UINT32_C(0x3) << 0)
+ /* As low as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \
+ (UINT32_C(0x4) << 0)
+ uint8_t pri_hint;
- /* Logical vnic ID */
- uint32_t vnic_id;
+ uint8_t unused_8;
+ uint32_t unused_9;
- uint32_t unused_0;
+ /*
+ * This is the ID of the filter that goes along with the pri_hint. This
+ * field is valid only for the following values. 1 - Above the given
+ * filter 2 - Below the given filter
+ */
+ uint64_t l2_filter_id_hint;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_vnic_free_output {
+/* Output (24 bytes) */
+struct hwrm_cfa_l2_filter_alloc_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -5029,10 +5545,22 @@ struct hwrm_vnic_free_output {
*/
uint16_t resp_len;
- uint32_t unused_0;
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint64_t l2_filter_id;
+
+ /*
+ * This is the ID of the flow associated with this filter. This value
+ * shall be used to match and associate the flow identifier returned in
+ * completion records. A value of 0xFFFFFFFF shall indicate no flow id.
+ */
+ uint32_t flow_id;
+
+ uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
- uint8_t unused_3;
/*
* This field is used in Output records to indicate that the output is
@@ -5044,11 +5572,13 @@ struct hwrm_vnic_free_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_vnic_rss_cfg */
-/* Description: This function is used to enable RSS configuration. */
-
-/* Input (48 bytes) */
-struct hwrm_vnic_rss_cfg_input {
+/* hwrm_cfa_l2_filter_free */
+/*
+ * Description: Free a L2 filter. The HWRM shall free all associated filter
+ * resources with the L2 filter.
+ */
+/* Input (24 bytes) */
+struct hwrm_cfa_l2_filter_free_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -5080,57 +5610,15 @@ struct hwrm_vnic_rss_cfg_input {
uint64_t resp_addr;
/*
- * When this bit is '1', the RSS hash shall be computed over source and
- * destination IPv4 addresses of IPv4 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
- /*
- * When this bit is '1', the RSS hash shall be computed over
- * source/destination IPv4 addresses and source/destination ports of
- * TCP/IPv4 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
- /*
- * When this bit is '1', the RSS hash shall be computed over
- * source/destination IPv4 addresses and source/destination ports of
- * UDP/IPv4 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
- /*
- * When this bit is '1', the RSS hash shall be computed over source and
- * destination IPv4 addresses of IPv6 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
- /*
- * When this bit is '1', the RSS hash shall be computed over
- * source/destination IPv6 addresses and source/destination ports of
- * TCP/IPv6 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
- /*
- * When this bit is '1', the RSS hash shall be computed over
- * source/destination IPv6 addresses and source/destination ports of
- * UDP/IPv6 packets.
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
*/
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
- uint32_t hash_type;
-
- uint32_t unused_0;
-
- /* This is the address for rss ring group table */
- uint64_t ring_grp_tbl_addr;
-
- /* This is the address for rss hash key table */
- uint64_t hash_key_tbl_addr;
-
- /* Index to the rss indirection table. */
- uint16_t rss_ctx_idx;
-
- uint16_t unused_1[3];
+ uint64_t l2_filter_id;
} __attribute__((packed));
+
/* Output (16 bytes) */
-struct hwrm_vnic_rss_cfg_output {
+struct hwrm_cfa_l2_filter_free_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -5165,8 +5653,10 @@ struct hwrm_vnic_rss_cfg_output {
uint8_t valid;
} __attribute__((packed));
-/* Input (16 bytes) */
-struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
+/* hwrm_cfa_l2_set_rx_mask */
+/* Description: This command will set rx mask of the function. */
+/* Input (56 bytes) */
+struct hwrm_cfa_l2_set_rx_mask_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -5196,128 +5686,115 @@ struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
* cleared to zero before the request is made.
*/
uint64_t resp_addr;
-} __attribute__((packed));
-/* Output (16 bytes) */
+ /* VNIC ID */
+ uint32_t vnic_id;
-struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
+ /* Reserved for future use. */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_RESERVED UINT32_C(0x1)
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * When this bit is '1', the function is requested to accept multi-cast
+ * packets specified by the multicast addr table.
*/
- uint16_t error_code;
-
- /* This field returns the type of original request. */
- uint16_t req_type;
-
- /* This field provides original sequence number of the command. */
- uint16_t seq_id;
-
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST UINT32_C(0x2)
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * When this bit is '1', the function is requested to accept all multi-
+ * cast packets.
*/
- uint16_t resp_len;
-
- /* rss_cos_lb_ctx_id is 16 b */
- uint16_t rss_cos_lb_ctx_id;
-
- uint8_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
- uint8_t unused_4;
-
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST UINT32_C(0x4)
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * When this bit is '1', the function is requested to accept broadcast
+ * packets.
*/
- uint8_t valid;
-} __attribute__((packed));
-
-/* hwrm_vnic_rss_cos_lb_ctx_free */
-/* Description: This function can be used to free COS/Load Balance context. */
-/* Input (24 bytes) */
-
-struct hwrm_vnic_rss_cos_lb_ctx_free_input {
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST UINT32_C(0x8)
/*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
+ * When this bit is '1', the function is requested to be put in the
+ * promiscuous mode. The HWRM should accept any function to set up
+ * promiscuous mode. The HWRM shall follow the semantics below for the
+ * promiscuous mode support. # When partitioning is not enabled on a
+ * port (i.e. single PF on the port), then the PF shall be allowed to be
+ * in the promiscuous mode. When the PF is in the promiscuous mode, then
+ * it shall receive all host bound traffic on that port. # When
+ * partitioning is enabled on a port (i.e. multiple PFs per port) and a
+ * PF on that port is in the promiscuous mode, then the PF receives all
+ * traffic within that partition as identified by a unique identifier
+ * for the PF (e.g. S-Tag). If a unique outer VLAN for the PF is
+ * specified, then the setting of promiscuous mode on that PF shall
+ * result in the PF receiving all host bound traffic with matching outer
+ * VLAN. # A VF shall can be set in the promiscuous mode. In the
+ * promiscuous mode, the VF does not receive any traffic unless a unique
+ * outer VLAN for the VF is specified. If a unique outer VLAN for the VF
+ * is specified, then the setting of promiscuous mode on that VF shall
+ * result in the VF receiving all host bound traffic with the matching
+ * outer VLAN. # The HWRM shall allow the setting of promiscuous mode on
+ * a function independently from the promiscuous mode settings on other
+ * functions.
*/
- uint16_t req_type;
-
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * If this flag is set, the corresponding RX filters shall be set up to
+ * cover multicast/broadcast filters for the outermost Layer 2
+ * destination MAC address field.
*/
- uint16_t cmpl_ring;
-
- /* This value indicates the command sequence number. */
- uint16_t seq_id;
-
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST UINT32_C(0x20)
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * If this flag is set, the corresponding RX filters shall be set up to
+ * cover multicast/broadcast filters for the VLAN-tagged packets that
+ * match the TPID and VID fields of VLAN tags in the VLAN tag table
+ * specified in this command.
*/
- uint16_t target_id;
-
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY UINT32_C(0x40)
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * If this flag is set, the corresponding RX filters shall be set up to
+ * cover multicast/broadcast filters for non-VLAN tagged packets and
+ * VLAN-tagged packets that match the TPID and VID fields of VLAN tags
+ * in the VLAN tag table specified in this command.
*/
- uint64_t resp_addr;
-
- /* rss_cos_lb_ctx_id is 16 b */
- uint16_t rss_cos_lb_ctx_id;
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN UINT32_C(0x80)
+ /*
+ * If this flag is set, the corresponding RX filters shall be set up to
+ * cover multicast/broadcast filters for non-VLAN tagged packets and
+ * VLAN-tagged packets matching any VLAN tag. If this flag is set, then
+ * the HWRM shall ignore VLAN tags specified in vlan_tag_tbl. If none of
+ * vlanonly, vlan_nonvlan, and anyvlan_nonvlan flags is set, then the
+ * HWRM shall ignore VLAN tags specified in vlan_tag_tbl. The HWRM
+ * client shall set at most one flag out of vlanonly, vlan_nonvlan, and
+ * anyvlan_nonvlan.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \
+ UINT32_C(0x100)
+ uint32_t mask;
- uint16_t unused_0[3];
-} __attribute__((packed));
+ /* This is the address for mcast address tbl. */
+ uint64_t mc_tbl_addr;
-/* Output (16 bytes) */
-struct hwrm_vnic_rss_cos_lb_ctx_free_output {
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * This value indicates how many entries in mc_tbl are valid. Each entry
+ * is 6 bytes.
*/
- uint16_t error_code;
-
- /* This field returns the type of original request. */
- uint16_t req_type;
+ uint32_t num_mc_entries;
- /* This field provides original sequence number of the command. */
- uint16_t seq_id;
+ uint32_t unused_0;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * This is the address for VLAN tag table. Each VLAN entry in the table
+ * is 4 bytes of a VLAN tag including TPID, PCP, DEI, and VID fields in
+ * network byte order.
*/
- uint16_t resp_len;
-
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
+ uint64_t vlan_tag_tbl_addr;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This value indicates how many entries in vlan_tag_tbl are valid. Each
+ * entry is 4 bytes.
*/
- uint8_t valid;
+ uint32_t num_vlan_tags;
+
+ uint32_t unused_1;
} __attribute__((packed));
-/* Output (32 bytes) */
-struct hwrm_queue_qportcfg_output {
+
+/* Output (16 bytes) */
+struct hwrm_cfa_l2_set_rx_mask_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -5337,186 +5814,10 @@ struct hwrm_queue_qportcfg_output {
*/
uint16_t resp_len;
- /* The maximum number of queues that can be configured. */
- uint8_t max_configurable_queues;
-
- /* The maximum number of lossless queues that can be configured. */
- uint8_t max_configurable_lossless_queues;
-
- /*
- * 0 - Not allowed. Non-zero - Allowed. If this value is non-zero, then
- * the HWRM shall allow the host SW driver to configure queues using
- * hwrm_queue_cfg.
- */
- uint8_t queue_cfg_allowed;
-
- /*
- * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
- * the HWRM shall allow the host SW driver to configure queue buffers
- * using hwrm_queue_buffers_cfg.
- */
- uint8_t queue_buffers_cfg_allowed;
-
- /*
- * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
- * the HWRM shall allow the host SW driver to configure PFC using
- * hwrm_queue_pfcenable_cfg.
- */
- uint8_t queue_pfcenable_cfg_allowed;
-
- /*
- * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
- * the HWRM shall allow the host SW driver to configure Priority to CoS
- * mapping using hwrm_queue_pri2cos_cfg.
- */
- uint8_t queue_pri2cos_cfg_allowed;
-
- /*
- * 0 - Not allowed. Non-zero - Allowed If this value is non-zero, then
- * the HWRM shall allow the host SW driver to configure CoS Bandwidth
- * configuration using hwrm_queue_cos2bw_cfg.
- */
- uint8_t queue_cos2bw_cfg_allowed;
-
- /* ID of CoS Queue 0. FF - Invalid id */
- uint8_t queue_id0;
-
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \
- (UINT32_C(0x0) << 0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \
- (UINT32_C(0x1) << 0)
- /*
- * Set to 0xFF... (All Fs) if there is no service profile
- * specified
- */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \
- (UINT32_C(0xff) << 0)
- uint8_t queue_id0_service_profile;
-
- /* ID of CoS Queue 1. FF - Invalid id */
- uint8_t queue_id1;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \
- (UINT32_C(0x0) << 0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \
- (UINT32_C(0x1) << 0)
- /*
- * Set to 0xFF... (All Fs) if there is no service profile
- * specified
- */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \
- (UINT32_C(0xff) << 0)
- uint8_t queue_id1_service_profile;
-
- /* ID of CoS Queue 2. FF - Invalid id */
- uint8_t queue_id2;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \
- (UINT32_C(0x0) << 0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \
- (UINT32_C(0x1) << 0)
- /*
- * Set to 0xFF... (All Fs) if there is no service profile
- * specified
- */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \
- (UINT32_C(0xff) << 0)
- uint8_t queue_id2_service_profile;
-
- /* ID of CoS Queue 3. FF - Invalid id */
- uint8_t queue_id3;
-
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \
- (UINT32_C(0x0) << 0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \
- (UINT32_C(0x1) << 0)
- /*
- * Set to 0xFF... (All Fs) if there is no service profile
- * specified
- */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \
- (UINT32_C(0xff) << 0)
- uint8_t queue_id3_service_profile;
-
- /* ID of CoS Queue 4. FF - Invalid id */
- uint8_t queue_id4;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \
- (UINT32_C(0x0) << 0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \
- (UINT32_C(0x1) << 0)
- /*
- * Set to 0xFF... (All Fs) if there is no service profile
- * specified
- */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \
- (UINT32_C(0xff) << 0)
- uint8_t queue_id4_service_profile;
-
- /* ID of CoS Queue 5. FF - Invalid id */
- uint8_t queue_id5;
-
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \
- (UINT32_C(0x0) << 0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \
- (UINT32_C(0x1) << 0)
- /*
- * Set to 0xFF... (All Fs) if there is no service profile
- * specified
- */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \
- (UINT32_C(0xff) << 0)
- uint8_t queue_id5_service_profile;
-
- /* ID of CoS Queue 6. FF - Invalid id */
- uint8_t queue_id6_service_profile;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \
- (UINT32_C(0x0) << 0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \
- (UINT32_C(0x1) << 0)
- /*
- * Set to 0xFF... (All Fs) if there is no service profile
- * specified
- */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \
- (UINT32_C(0xff) << 0)
- uint8_t queue_id6;
-
- /* ID of CoS Queue 7. FF - Invalid id */
- uint8_t queue_id7;
-
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \
- (UINT32_C(0x0) << 0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \
- (UINT32_C(0x1) << 0)
- /*
- * Set to 0xFF... (All Fs) if there is no service profile
- * specified
- */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \
- (UINT32_C(0xff) << 0)
- uint8_t queue_id7_service_profile;
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
/*
* This field is used in Output records to indicate that the output is
@@ -5528,16 +5829,13 @@ struct hwrm_queue_qportcfg_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_func_drv_rgtr */
+/* hwrm_stat_ctx_alloc */
/*
- * Description: This command is used by the function driver to register its
- * information with the HWRM. A function driver shall implement this command. A
- * function driver shall use this command during the driver initialization
right
- * after the HWRM version discovery and default ring resources allocation.
+ * Description: This command allocates and does basic preparation for a stat
+ * context.
*/
-
-/* Input (80 bytes) */
-struct hwrm_func_drv_rgtr_input {
+/* Input (32 bytes) */
+struct hwrm_stat_ctx_alloc_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -5568,115 +5866,20 @@ struct hwrm_func_drv_rgtr_input {
*/
uint64_t resp_addr;
- /*
- * When this bit is '1', the function driver is requesting all requests
- * from its children VF drivers to be forwarded to itself. This flag can
- * only be set by the PF driver. If a VF driver sets this flag, it
- * should be ignored by the HWRM.
- */
- #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE UINT32_C(0x1)
- /*
- * When this bit is '1', the function is requesting none of the requests
- * from its children VF drivers to be forwarded to itself. This flag can
- * only be set by the PF driver. If a VF driver sets this flag, it
- * should be ignored by the HWRM.
- */
- #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE UINT32_C(0x2)
- uint32_t flags;
-
- /* This bit must be '1' for the os_type field to be configured. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE UINT32_C(0x1)
- /* This bit must be '1' for the ver field to be configured. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER UINT32_C(0x2)
- /* This bit must be '1' for the timestamp field to be configured. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP UINT32_C(0x4)
- /* This bit must be '1' for the vf_req_fwd field to be configured. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_REQ_FWD UINT32_C(0x8)
- /*
- * This bit must be '1' for the async_event_fwd field to be configured.
- */
- #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD \
- UINT32_C(0x10)
- uint32_t enables;
-
- /* This value indicates the type of OS. */
- /* Unknown */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN \
- (UINT32_C(0x0) << 0)
- /* Other OS not listed below. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER \
- (UINT32_C(0x1) << 0)
- /* MSDOS OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS \
- (UINT32_C(0xe) << 0)
- /* Windows OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS \
- (UINT32_C(0x12) << 0)
- /* Solaris OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS \
- (UINT32_C(0x1d) << 0)
- /* Linux OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX \
- (UINT32_C(0x24) << 0)
- /* FreeBSD OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD \
- (UINT32_C(0x2a) << 0)
- /* VMware ESXi OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI \
- (UINT32_C(0x68) << 0)
- /* Microsoft Windows 8 64-bit OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 \
- (UINT32_C(0x73) << 0)
- /* Microsoft Windows Server 2012 R2 OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 \
- (UINT32_C(0x74) << 0)
- uint16_t os_type;
-
- /* This is the major version of the driver. */
- uint8_t ver_maj;
-
- /* This is the minor version of the driver. */
- uint8_t ver_min;
-
- /* This is the update version of the driver. */
- uint8_t ver_upd;
-
- uint8_t unused_0;
- uint16_t unused_1;
-
- /*
- * This is a 32-bit timestamp provided by the driver for keep alive. The
- * timestamp is in multiples of 1ms.
- */
- uint32_t timestamp;
-
- uint32_t unused_2;
+ /* This is the address for statistic block. */
+ uint64_t stats_dma_addr;
/*
- * This is a 256-bit bit mask provided by the PF driver for letting the
- * HWRM know what commands issued by the VF driver to the HWRM should be
- * forwarded to the PF driver. Nth bit refers to the Nth req_type.
- * Setting Nth bit to 1 indicates that requests from the VF driver with
- * req_type equal to N shall be forwarded to the parent PF driver. This
- * field is not valid for the VF driver.
+ * The statistic block update period in ms. e.g. 250ms, 500ms, 750ms,
+ * 1000ms.
*/
- uint32_t vf_req_fwd[8];
+ uint32_t update_period_ms;
- /*
- * This is a 256-bit bit mask provided by the function driver (PF or VF
- * driver) to indicate the list of asynchronous event completions to be
- * forwarded. Nth bit refers to the Nth event_id. Setting Nth bit to 1
- * by the function driver shall result in the HWRM forwarding
- * asynchronous event completion with event_id equal to N. If all bits
- * are set to 0 (value of 0), then the HWRM shall not forward any
- * asynchronous event completion to this function driver.
- */
- uint32_t async_event_fwd[8];
+ uint32_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
-
-struct hwrm_func_drv_rgtr_output {
+struct hwrm_stat_ctx_alloc_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -5696,10 +5899,12 @@ struct hwrm_func_drv_rgtr_output {
*/
uint16_t resp_len;
- uint32_t unused_0;
+ /* This is the statistics context ID value. */
+ uint32_t stat_ctx_id;
+
+ uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
- uint8_t unused_3;
/*
* This field is used in Output records to indicate that the output is
@@ -5711,15 +5916,10 @@ struct hwrm_func_drv_rgtr_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_func_drv_unrgtr */
-/*
- * Description: This command is used by the function driver to un register with
- * the HWRM. A function driver shall implement this command. A function driver
- * shall use this command during the driver unloading.
- */
+/* hwrm_stat_ctx_free */
+/* Description: This command is used to free a stat context. */
/* Input (24 bytes) */
-
-struct hwrm_func_drv_unrgtr_input {
+struct hwrm_stat_ctx_free_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
@@ -5750,19 +5950,15 @@ struct hwrm_func_drv_unrgtr_input {
*/
uint64_t resp_addr;
- /*
- * When this bit is '1', the function driver is notifying the HWRM to
- * prepare for the shutdown.
- */
- #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \
- UINT32_C(0x1)
- uint32_t flags;
+ /* ID of the statistics context that is being queried. */
+ uint32_t stat_ctx_id;
uint32_t unused_0;
} __attribute__((packed));
+
/* Output (16 bytes) */
-struct hwrm_func_drv_unrgtr_output {
+struct hwrm_stat_ctx_free_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
@@ -5782,10 +5978,12 @@ struct hwrm_func_drv_unrgtr_output {
*/
uint16_t resp_len;
- uint32_t unused_0;
+ /* This is the statistics context ID value. */
+ uint32_t stat_ctx_id;
+
+ uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
- uint8_t unused_3;
/*
* This field is used in Output records to indicate that the output is
@@ -5797,22 +5995,16 @@ struct hwrm_func_drv_unrgtr_output {
uint8_t valid;
} __attribute__((packed));
-/* hwrm_func_qcfg */
-/*
- * Description: This command returns the current configuration of a function.
- * The input FID value is used to indicate what function is being queried. This
- * allows a physical function driver to query virtual functions that are
- * children of the physical function. The output FID value is needed to
- * configure Rings and MSI-X vectors so their DMA operations appear correctly
on
- * the PCI bus.
- */
+/* hwrm_stat_ctx_clr_stats */
+/* Description: This command clears statistics of a context. */
/* Input (24 bytes) */
-struct hwrm_func_qcfg_input {
+struct hwrm_stat_ctx_clr_stats_input {
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
*/
uint16_t req_type;
+
/*
* This value indicates the what completion ring the request will be
* optionally completed on. If the value is -1, then no CR completion
@@ -5820,184 +6012,151 @@ struct hwrm_func_qcfg_input {
* for this function.
*/
uint16_t cmpl_ring;
+
/* This value indicates the command sequence number. */
uint16_t seq_id;
+
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
* 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
uint16_t target_id;
+
/*
* This is the host address where the response will be written when the
* request is complete. This area must be 16B aligned and must be
* cleared to zero before the request is made.
*/
uint64_t resp_addr;
- /*
- * Function ID of the function that is being queried. 0xFF... (All Fs)
- * if the query is for the requesting function.
- */
- uint16_t fid;
- uint16_t unused_0[3];
+ /* ID of the statistics context that is being queried. */
+ uint32_t stat_ctx_id;
+
+ uint32_t unused_0;
} __attribute__((packed));
-/* Output (72 bytes) */
-struct hwrm_func_qcfg_output {
+/* Output (16 bytes) */
+struct hwrm_stat_ctx_clr_stats_output {
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
*/
uint16_t error_code;
+
/* This field returns the type of original request. */
uint16_t req_type;
+
/* This field provides original sequence number of the command. */
uint16_t seq_id;
+
/*
* This field is the length of the response in bytes. The last byte of
* the response is a valid flag that will read as '1' when the command
* has been completely written to memory.
*/
uint16_t resp_len;
- /*
- * FID value. This value is used to identify operations on the PCI bus
- * as belonging to a particular PCI function.
- */
- uint16_t fid;
- /*
- * Port ID of port that this function is associated with. 0xFF... (All
- * Fs) if this function is not associated with any port.
- */
- uint16_t port_id;
- /*
- * This value is the current VLAN setting for this function. The value
- * of 0 for this field indicates no priority tagging or VLAN is used.
- * This VLAN is in 802.1Q tag format.
- */
- uint16_t vlan;
- uint8_t unused_0;
+ uint32_t unused_0;
uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
/*
- * This value is current MAC address configured for this function. A
- * value of 00-00-00-00-00-00 indicates no MAC address is currently
- * configured.
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
*/
- uint8_t mac_address[6];
+ uint8_t valid;
+} __attribute__((packed));
+/* hwrm_exec_fwd_resp */
+/*
+ * Description: This command is used to send an encapsulated request to the
+ * HWRM. This command instructs the HWRM to execute the request and forward the
+ * response of the encapsulated request to the location specified in the
+ * original request that is encapsulated. The target id of this command shall
be
+ * set to 0xFFFF (HWRM). The response location in this command shall be used to
+ * acknowledge the receipt of the encapsulated request and forwarding of the
+ * response.
+ */
+/* Input (128 bytes) */
+struct hwrm_exec_fwd_resp_input {
/*
- * This value is current PCI ID of this function. If ARI is enabled,
- * then it is Bus Number (8b):Function Number(8b). Otherwise, it is Bus
- * Number (8b):Device Number (4b):Function Number(4b).
- */
- uint16_t pci_id;
- /* The number of RSS/COS contexts currently allocated to the function.
*/
- uint16_t alloc_rsscos_ctx;
- /*
- * The number of completion rings currently allocated to the function.
- * This does not include the rings allocated to any children functions
- * if any.
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
*/
- uint16_t alloc_cmpl_rings;
+ uint16_t req_type;
+
/*
- * The number of transmit rings currently allocated to the function.
- * This does not include the rings allocated to any children functions
- * if any.
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
*/
- uint16_t alloc_tx_rings;
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
+
/*
- * The number of receive rings currently allocated to the function. This
- * does not include the rings allocated to any children functions if
- * any.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
- uint16_t alloc_rx_rings;
- /* The allocated number of L2 contexts to the function. */
- uint16_t alloc_l2_ctx;
- /* The allocated number of vnics to the function. */
- uint16_t alloc_vnics;
+ uint16_t target_id;
+
/*
- * The maximum transmission unit of the function. For rings allocated on
- * this function, this default value is used if ring MTU is not
- * specified.
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
*/
- uint16_t mtu;
+ uint64_t resp_addr;
+
/*
- * The maximum receive unit of the function. For vnics allocated on this
- * function, this default value is used if vnic MRU is not specified.
+ * This is an encapsulated request. This request should be executed by
+ * the HWRM and the response should be provided in the response buffer
+ * inside the encapsulated request.
*/
- uint16_t mru;
- /* The statistics context assigned to a function. */
- uint16_t stat_ctx_id;
+ uint32_t encap_request[26];
+
/*
- * The HWRM shall return Unknown value for this field when this command
- * is used to query VF's configuration.
+ * This value indicates the target id of the response to the
+ * encapsulated request. 0x0 - 0xFFF8 - Used for function ids 0xFFF8 -
+ * 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
- /* Single physical function */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF \
- (UINT32_C(0x0) << 0)
- /* Multiple physical functions */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS \
- (UINT32_C(0x1) << 0)
- /* Network Partitioning 1.0 */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 \
- (UINT32_C(0x2) << 0)
- /* Network Partitioning 1.5 */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 \
- (UINT32_C(0x3) << 0)
- /* Network Partitioning 2.0 */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 \
- (UINT32_C(0x4) << 0)
- /* Unknown */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \
- (UINT32_C(0xff) << 0)
- uint8_t port_partition_type;
+ uint16_t encap_resp_target_id;
- uint8_t unused_2;
- /* The default VNIC ID assigned to a function that is being queried. */
- uint16_t dflt_vnic_id;
+ uint16_t unused_0[3];
+} __attribute__((packed));
- uint8_t unused_3;
- uint8_t unused_4;
- /*
- * Minimum BW allocated for this function in Mbps. The HWRM will
- * translate this value into byte counter and time interval used for the
- * scheduler inside the device. A value of 0 indicates the minimum
- * bandwidth is not configured.
- */
- uint32_t min_bw;
- /*
- * Maximum BW allocated for this function in Mbps. The HWRM will
- * translate this value into byte counter and time interval used for the
- * scheduler inside the device. A value of 0 indicates that the maximum
- * bandwidth is not configured.
- */
- uint32_t max_bw;
+
+/* Output (16 bytes) */
+struct hwrm_exec_fwd_resp_output {
/*
- * This value indicates the Edge virtual bridge mode for the domain that
- * this function belongs to.
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
*/
- /* No Edge Virtual Bridging (EVB) */
- #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB (UINT32_C(0x0) << 0)
- /* Virtual Ethernet Bridge (VEB) */
- #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB (UINT32_C(0x1) << 0)
- /* Virtual Ethernet Port Aggregator (VEPA) */
- #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA (UINT32_C(0x2) << 0)
- uint8_t evb_mode;
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
- uint8_t unused_5;
- uint16_t unused_6;
/*
- * The number of allocated multicast filters for this function on the RX
- * side.
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
*/
- uint32_t alloc_mcast_filters;
- /* The number of allocated HW ring groups for this function. */
- uint32_t alloc_hw_ring_grps;
+ uint16_t resp_len;
+
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
- uint8_t unused_7;
- uint8_t unused_8;
- uint8_t unused_9;
/*
* This field is used in Output records to indicate that the output is
* completely written to RAM. This field should be read as '1' to
--
2.7.4 (Apple Git-66)
