On Tue, Sep 22, 2015 at 05:51:02PM +0300, Marcel Apfelbaum wrote:
> >It's proved to work after the fix (at least in my testing), but
> >it's late here and I'm gonna send a new version tomorrow, including
> >some other comments addressing. Please do more test then :)
> >
It's unlikely that I will
Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for
tilegx. But I got a error with rte_mbuf rte_pktmbuf_append.
PANIC in rte_mbuf_sanity_check():
bad phys addr
7: [/trafgen(_start+0x70) [0x100b308]]
6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]]
5:
and I wrote a sample RX example, got an other information.
PMD: xgbe1: Could not register memseg @0x1ffd200, -.
PMD: xgbe1: Could not register memseg @0x1ff4100, -.
PMD: xgbe1: Could not register memseg @0x1ff3e00, -.
PMD: xgbe1: Could not register memseg @0x1ff2d00,
On 2015/9/22 6:40, Stephen Hemminger wrote:
> On Wed, 16 Sep 2015 22:51:24 +0100
> Pablo de Lara wrote:
>
>> This is important to avoid trying to start/stop twice a queue,
>> which will result in undefined behaviour
>> (which may cause RX/TX disruption).
>>
>> Mind that only the PMDs which have
Hi, Arthas
Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx?
>-Original Message-
>From: Arthas [mailto:kangzy1982 at qq.com]
>Sent: Wednesday, September 23, 2015 1:21 PM
>To: dev
>Cc: zlu
>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
>
>and
> -Original Message-
> From: Qiu, Michael
> Sent: Wednesday, September 23, 2015 7:57 AM
> To: Stephen Hemminger; De Lara Guarch, Pablo
> Cc: dev at dpdk.org; thomas.monjalon at 6wind.com
> Subject: Re: [dpdk-dev] [PATCH v2] ethdev: add new RX/TX queue state
> arrays in rte_eth_dev_data
>
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Qiu, Michael
> Sent: Wednesday, September 23, 2015 7:57 AM
> To: Stephen Hemminger; De Lara Guarch, Pablo
> Cc: dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v2] ethdev: add new RX/TX queue state arrays
>
On Tue, Sep 22, 2015 at 10:21:22AM +0800, Yuanhan Liu wrote:
> On Mon, Sep 21, 2015 at 12:02:20PM +0300, Michael S. Tsirkin wrote:
> > On Mon, Sep 21, 2015 at 10:22:52AM +0800, Yuanhan Liu wrote:
> > > On Sun, Sep 20, 2015 at 12:37:35PM +0300, Michael S. Tsirkin wrote:
> > > > On Fri, Sep 18, 2015
On 15/09/2015 14:10, Thomas Monjalon wrote:
> 2015-09-15 13:16, Remy Horton:
>> Provides a basic framework for detecting and reporting live-ness of
>> LCores, the primary requirement of which is minimal overheads for the
>> core(s) being checked. Core failures are notified via an application
>>
Hi, ZhiGang
My tilegx boot parameter is "tile-monitor --dev gxpci${1} --hv-bin-dir
/tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64".
and testpmd start parameter is
tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run -+-
./testpmd -c 0x -m 2048 -n 1 -r 1 --vdev
Hi, ZhiGang
I checked source code and debug it , found dpdk function rte_eth_tx_burst
with tilegx return 0 and no other error. Can I contact
you directly?
Regards,
Arthas
-- Original --
From: "Arthas";;
Date: Wed, Sep 23, 2015 06:35
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Pablo de Lara
> Sent: Wednesday, September 16, 2015 10:51 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH v2] ethdev: add new RX/TX queue state arrays in
> rte_eth_dev_data
>
> Following the same
> -Original Message-
> From: Thomas Monjalon [mailto:thomas.monjalon at 6wind.com]
> Sent: Tuesday, September 22, 2015 4:41 PM
> To: Dumitrescu, Cristian
> Cc: dev at dpdk.org; Yeddula, Avinash; Bly, Mike
> Subject: Re: [dpdk-dev] DPDK hash function related question
>
> 2015-09-22
> -Original Message-
> From: Thomas Monjalon [mailto:thomas.monjalon at 6wind.com]
> Sent: Tuesday, September 22, 2015 5:24 PM
> To: Dumitrescu, Cristian
> Cc: dev at dpdk.org; Stephen Hemminger; Azarewicz, PiotrX T
> Subject: Re: [dpdk-dev] [PATCH v1 1/3] port: add mp/mc ring ports
>
>
Hello,
We are building a real-time application to monitor IP packets. This
application captures packets on UDP which are received by joining
multicast sessions.
We have downloaded DPDK v2.1.0 and built it with target
'x86_64-native-linuxapp-gcc' using the setup.sh script provided in tools
Hi,
Thanks you for your feedback, I?ll send a version 2 based on last comments.
Thanks,
Mario
From: Olivier MATZ [olivier.m...@6wind.com]
Sent: Tuesday, September 22, 2015 7:40 AM
To: Panu Matilainen; Arevalo, Mario Alfredo C; dev at dpdk.org
Subject:
> The patch introduces a new PMD. This PMD is implemented as thin wrapper
> of librte_vhost. It means librte_vhost is also needed to compile the PMD.
> The PMD can have 'iface' parameter like below to specify a path to connect
> to a virtio-net device.
>
> $ ./testpmd -c f -n 4 --vdev
On Wed, 23 Sep 2015 18:43:37 +0530
K Rahul wrote:
> We have downloaded DPDK v2.1.0 and built it with target
> 'x86_64-native-linuxapp-gcc' using the setup.sh script provided in tools
> directory. We are using 64-bit Centos 6.5 with kernel version 2.6.32 and
> we had set the number of
The vHost eventlink driver is a kernel module that requires a kernel
source/build directory to build the ko. Convert the fixed kernel build
directory specifier to one which may be user specified on the command-line.
Signed-off-by: Aaron Conole
---
lib/librte_vhost/eventfd_link/Makefile | 6
Hi Jim,
I see that there is a session loosely aligned with the agenda below on
the agenda for DPDK Userspace in Dublin:
https://dpdksummit.com/us/en/userspace2015 (current speaker is TBC).
Will this call serve as a preparation call for that face to face
meeting? In which case, is this the
Instead of executing following functions before and after vdev_init
> rte_eth_dev_save and
> rte_eth_dev_get_changed_port
update following functions to return allocated port_id.
> rte_eal_vdev_init
> rte_eal_probe_one
Ravi Kerur (1):
Change rte_eal_vdev_init to update port_id
v3:
> Isolate changes within rte_ether component.
v2:
> Remove tilegx changes
> Use rte_eal_compare_pci_addr for address comparison
> Use dpdk_2.2 in version map file for new functions
v1:
Changes include
> Modify rte_eal_vdev_init to return allocated port_id
> Modify
Hi David, Tetsuya,
I have sent V3 (changes isolated to rte_ether component) for formal review.
Please look into it and let me know your inputs.
@David: I looked at "rte_eth_dev_get_port_by_name()", this function is
similar to "rte_eth_dev_get_name_by_port" and I have used same logic. Let
me know
23 matches
Mail list logo