Re: BACnet tests and doubts

rted, but my changes are not compatible any more and have to be done from scratch. Long story short - currently bacnet driver is not an "online" driver. Best, Łukasz On 6.10.2022 11:26, Iñigo Angulo wrote: > Hi all, > > I started doing some tests with BACnet, and wanted to a

BACnet tests and doubts

Hi all, I started doing some tests with BACnet, and wanted to ask a question about using the driver. I am pretty newbie to this protocol, so hope this will make sense... :) I am using this project (https://github.com/bacnet-stack/bacnet-stack) to simulate a BACnet device on Linux. Using the

Re: AW: Nifi PlcAddressString syntax

it when we get the time. inigo - Mensaje original - De: "ottobackwards" Para: "Iñigo Angulo" , "dev" Enviados: Viernes, 5 de Agosto 2022 4:25:45 Asunto: Re: AW: Nifi PlcAddressString syntax Just to put it here as I did in the pr. Nifi processors suppor

Re: AW: Nifi PlcAddressString syntax

that we can keep discussing :) inigo - Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia) - - Mensaje original - De

Nifi PlcAddressString syntax

Hi all! We are working on a PR related to Apache Nifi integration and we found an issue on which we would like to have your opinion and comments. As you may know, Nifi processors have two properties that the user can configure: PlcConnectionString and PlcAddressString. The later describes

Re: Nifi record oriented update

s I think if it's > > better than the current version, it's worth having it ... it doesn't have > > to be completely finished. > > > > Chris > > > > > > -Original Message- > > From: Iñigo Angulo > > Sent: Mittwoch, 11. Mai 2022 11:54 > &g

Nifi record oriented update

Hi PLC4X Community, I am writing to you regarding the 'Feature/nifi-record' PR. It's been a while since the last updates here, and we noticed the PR was set to draft due to inactivity. There were some discussions ongoing about few topics that could be enhanced on the code, mainly three

Re: AW: Start preparing the next release?

Hi Chris, ok, in that case maybe is better to wait for the next release, we dont want this topic to be a stopper. We will keep reviewing it and hope that we can prepare and extend it for the next one. thank you! regards, iñigo - Iñigo Angulo

Re: Start preparing the next release?

Hi Chris, Otto, Well, we think there has been some progress on the processors. For sure there are things that will need to be enhanced in the future, and if this feature is included in the next release and people start using it, there will probably appear new issues to review. But at the

Re: AW: AW: Nifi integration record oriented processor for reading

Hi Chris, I also had the confirmation from Apache that my ICLA is filed. My username is inigoao. Our collegue Alvaro has also sent it, I think in few days he will receive the confirmation. His username is asellart. regards, iñigo - Iñigo Angulo

Re: Nifi integration record oriented processor for reading

miss something would be great. Hopefully this could be soon tested by users in the community too and get some feedback :) thank you iñigo --------- Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo 201-203 48

Re: Nifi integration record oriented processor for reading

things done by this time. If you miss some task we could do here before doing the merge, please let us know. iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia

Re: Nifi integration record oriented processor for reading

- Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia) - - Mensaje original - De: "ottobackwards" Para: "dev" Enviados: Jueves, 17 de Junio

Re: Nifi integration record oriented processor for reading

informed. regards, iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia) - - Mensaje original - De

Re: Nifi integration record oriented processor for reading

, re-do the fork of the PLC4X repo, and add the changes to the code on a dedicated 'feature-nifi-record' branch. Maybe this could make things clearer... What do you think? thank you, iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource telf

Re: Nifi integration record oriented processor for reading

t the code, any suggestion will be very welcome. iñigo ----- Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia) - - Mensaj

Re: Nifi integration record oriented processor for reading

to access PlcValues, please let us know and we will update it. We will upload the code soon so that you can take a deeper look. thank you! iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo

Re: AW: AW: Nifi integration record oriented processor for reading

, iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia) - - Mensaje original - De: "Christofer Dutz"

Re: AW: Nifi integration record oriented processor for reading

can take a look at the code and let us know what you think. We will fill the ICLA document too. thank you iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia

Re: AW: Nifi integration record oriented processor for reading

t, just in case we could cause some problems...) thank you in advance iñigo ----- Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia) ---

Nifi integration record oriented processor for reading

- Iñigo Angulo ZYLK.net :: consultoría.openSource telf.: 747412337 Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia) -

Re: S7 write test doubt

e", "%DB20:DBD06:DINT", 1); And they are working perfectly now! Thank you so much for fixing the issue. I will keep doing more tests using the PLC4x library, and let you know of the results Thank you for the time and effort. Best, Iñigo --------- Iñigo Ang

Re: S7 write test doubt

Hi Etienne, Thank you for the advice. I will also use WireShark to try to make a clearer idea of where the problem is coming from. I will let you know of the progress i do. Iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource Ribera de Axpe, 11

Re: S7 write test doubt

Hi, Thank you for the information Cesar and Chris. I will take a look at those examples too, and continue doing further tests. I will keep you inform about the progress I do. Iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource Ribera de Axpe, 11

Re: S7 write test doubt

, and let you know of the progress i make. Thanks! Iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia) +34 944272119 - - Mensaje original

Re: S7 write test doubt

builderReader.addItem("mivariable-3", "%DB20:DBX6.3:BOOL"); //returns false builderReader.addItem("mivariable-4", "%DB20:DBX6.4:BOOL"); //returns false builderReader.addItem("mivariable-5&quo

Re: S7 write test doubt

Hi Julian, Yes, we saw the adopters page and were thinking to contribute there. We will prepare a short text describing the work we are doing with the project and send it to you soon. Thanks iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource

Re: S7 write test doubt

Hi Chris, Yes, using the 0.8.0-SNAPSHOT with the update you did the problem is solved now. Thank you for the help and the fast solution! Iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource Ribera de Axpe, 11 Edificio A, modulo 201-203 48950

Re: S7 write test doubt

Hi Chris, No problem. I will keep track of the issue in Jira, and use the 0.8.0-SNAPSHOT version. Thank you for your help iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia

Re: S7 write test doubt

Hi Chris, Thanks for the fast answer! I will keep your advice about not adding the cast to the values, and letting the driver do its work. If you want me to try to reproduce any other test just let me know. Iñigo - Iñigo Angulo ZYLK.net

S7 write test doubt

; //FAILS // builderWriter.addItem("mivariable-4", "%DB20:DBW06.0:INT", (short)2); //FAILS PlcWriteRequest writeRequest = builderWriter.build(); PlcWriteResponse writeResponse = writeRequest.execute().get(); GeneralFunctions.printPlc4XWriteReponse(writeResponse); //print response } } } - Iñigo Angulo ZYLK.net :: consultoría.openSource Ribera de Axpe, 11 Edificio A, modulo 201-203 48950 Erandio (Bizkaia) +34 944272119 -

Re: zylk

Hello Otto, We heard about it, but have not used it yet. By the moment, we have only used OPC-UA from Nifi. We will let you know if we make some tests. Thank you for the info anyway! Cheers, iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource

zylk

on contributions to PLC4X, so we will try to align the developments to the product. In case you have any sugestion, please do not hesitate to contact us. Looking forward, iñigo - Iñigo Angulo ZYLK.net :: consultoría.openSource Ribera de Axpe, 11 Edificio