Hi Dushantha,
Installing a fresh nginx doesn't make any difference or any sense as port
is occupied by something else :)
On Wed, Nov 29, 2017 at 12:49 PM, Dushantha Batuwita
wrote:
> Hi Senduran:
>
> I have tried your command and it is the apache2 process.
>
> sudo netstat -nlp | grep :80
> t
Hi Dushantha,
As you have mentioned apache2 is already bounded to port 80. that is why
when you try to start the nginx you are getting " Address already in use".
If you try stop the apache2 and start the nginx, you will be able to start
the nginx without the above error
Regards
Senduran
On Wed,
Hi Senduran:
I have tried your command and it is the apache2 process.
sudo netstat -nlp | grep :80
tcp6 0 0 :::80 :::*LISTEN
1076/apache2
further, *when I try installing the nginx freshly* the following error can
be seen too (with details I
Hi Buddhimala,
Can you check the throttle policy file whether the policy is updated or
not. Ex:
repository/deployment/server/executionplans/carbon.super_resource_100KKBPerMin_default.siddhiql
and
repository/deployment/server/executionplans/carbon.super_resource_100KKBPerMin_condition_1.siddhiql
T
Hi Dinusha,Irham,
I tried header condition throttling as well. The same behavior can be
observed in there also. Throttling out occurs after the default limit and
not after the condition request limit.
Thanks
On Wed, Nov 29, 2017 at 12:18 PM, Dinusha Dissanayake
wrote:
> Hi Buddhimala,
>
> Did
Hi Buddhimala,
Did you observe this behavior only for IP based throttle condition or with
other conditions as well (eg. header condition, IP range condition )?
Thanks,
DinushaD.
On Wed, Nov 29, 2017 at 11:47 AM, Buddhimala Ranasinghe wrote:
> Hi All,
>
> I have a distributed deployment in API
Hi Buddhimala,
I think the issue with the traffic manager related configuration in your
first setup. You can create any other advance throttling policies and check
whether thats working to make sure. That's why when your using only IS as
KM in your setup thats working.
Thanks,
Iqbal
On Wed, Nov
Hi Maneesha,
Thanks for the clarification. Appreciate if someone can explain why this
behavior is different for SP and IDPs? If there is an explanation would be
great to add it in to docs .
Thanks,
Ushani
On Wed, Nov 29, 2017 at 11:42 AM, Maneesha Wijesekara
wrote:
> Hi Ushani,
>
> As per the
Hi All,
I have a distributed deployment in API Manager which contains
1GW
Pub+Store+TM
Is as KM
I tried to implement IP level throttling for my API in this setup. I have
put 20 as my default equest limit and under IP condition I gave request
count as 5. I gave my local IP address as the IP condi
Hi Ushani,
As per the current implementation, a service provider only visible to the
user who created, at first. When creating service providers, by default a
role created as 'Application/{SERVICE_PROVIDER_NAME}. In order to make the
service provider available for the selected users, you can assig
Thanks for the explanation Isura!
On Wed, Nov 29, 2017 at 9:57 AM, Isura Karunaratne wrote:
> Hi Dulanja,
>
> This is used to store user metadata like confirmation codes when
> *JDBCUserRecoveryDataStore* is used. BTW we recommend to use
> RegistryRecoveryDataStore as the RecoveryDataStore in id
As the error says "Address already in use" you have to find which process
is bound to port 80 already. the following command will help you identify
the process running on port 80
sudo netstat -nlp | grep :80
find the process and stop that process first before trying to start the
nginx
Regards
Se
Hi
I completely uninstall NGINX from my machine and reinstalled it again and
but the NGINX server gives me the same error.
*Things I have done*
- I have run the command
sudo netstat -tulpn
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Addres
Hi IAM team,
Please consider the below example.
1. *admin* user belongs to *admin* role creates a SP named *adminsp* and an
IDP named *adminidp*
2. *admin1* user belongs to the same *admin* role creates a SP named
*admin1sp* and an IDP names *admin1idp*.
So the current behavior is,
1. Both *adm
Hi all,
I was able to verify that the SP4 Beta pack starts up in Windows 7 without
any issues with the fix applied. Thanks a lot Danesh for the quick
resolution!
Best,
On 29 November 2017 at 09:41, Danesh Kuruppu wrote:
> Hi Gokul,
>
> Just checking whether you are able to test this fix in SP.
On Wed, Nov 29, 2017 at 10:16 AM, Isura Karunaratne wrote:
> Hi all,
>
> We need to update the LDIF to support following attributes by default in
> the embedded LDAP.
>
>- verifyEmail
>- askPassword
>- forcePasswordReset
>- failedRecoveryAttempts
>- primaryChallengeQuestion
>
Hi Buddhimala,
Could you please elaborate your use case where you want to implement
caching? Since you have the API with CRUD operations, IMO it is not
meaningful to cache the responses for PUT and POST.
So if you want to cache 200 OK response of GET, you can implement it
through a custom sequence
Hi all,
We need to update the LDIF to support following attributes by default in
the embedded LDAP.
- verifyEmail
- askPassword
- forcePasswordReset
- failedRecoveryAttempts
- primaryChallengeQuestion
- emailVerified
- challengeQuestionUris
- failedLockoutCount
- lastLo
Hi Malith,
+1 for creating the diff archive, summery and all the wum related files in
the .wum-wso2 directory as this will make the user experience better.
Thanks & Regards,
Mushthaq
On Wed, Nov 29, 2017 at 9:34 AM, Malith Munasinghe wrote:
> Hi All,
>
> While using WUM diff command to compare
Hi Dulanja,
This is used to store user metadata like confirmation codes when
*JDBCUserRecoveryDataStore* is used. BTW we recommend to use
RegistryRecoveryDataStore as the RecoveryDataStore in identity management
features.
So, the metadata (like confirmation codes) are stored in the registry
inste
Added wire logs to see where this was coming from and it seems this is sent
back from the nginx instance.
Updating nginx to 1.12 resolved this. Thanks for the help Pubudu.
Cheers,
NuwanS.
On Mon, Nov 27, 2017 at 5:10 PM, Nuwan Silva wrote:
> Hi Pubudu,
>
> yes, Please find the Nginx configurati
Hi Gokul,
Just checking whether you are able to test this fix in SP. If the fix is
ok, we can release new version with this fix.
Thanks
Danesh
On Fri, Nov 24, 2017 at 7:57 PM, Sriskandarajah Suhothayan
wrote:
> @Gokul also please test and verity whether it fixes in SP.
>
> On Fri, Nov 24, 2017
Hi All,
While using WUM diff command to compare two updates it was noted that both
the Diff archive and Diff summary is getting created in the current working
directory.
IMO it would be better if we created those diff files in ~/.wum-wso2/ as
well since this will increase the user experience by l
The reason for this is, initially the developer studio was across the
platform, so the server role was there to distinguish the artifacts. But
since now we have the EI / ESB tooling we can have the EnterpriseServiceBus
as the default role.
On Tue, Nov 28, 2017 at 11:07 PM, Shazni Nazeer wrote:
Thanks for reply Madhawa.
Thanks
Godwin
On Wed, Nov 29, 2017 at 9:56 AM, Madhawa Gunasekara
wrote:
> Hi Godwin,
>
> Sorry for the late reply. We do support only one type of refcursor at the
> moment.[2] there was a discussion on this feature in the support dev
> mailing list[1]. Still, We haven
Hi Godwin,
Sorry for the late reply. We do support only one type of refcursor at the
moment.[2] there was a discussion on this feature in the support dev
mailing list[1]. Still, We haven't implemented this feature.
[1] Question about Oracle Stored Procedure using multiple ref cursors
[2] https://
Reminder on this.
Thanks
Godwin
On Mon, Nov 27, 2017 at 9:30 AM, Godwin Shrimal wrote:
> Hi Devs,
>
> Are we supporting $subject in EI-6.1.1? If yes can someone share any
> documentation/article/blog?
>
> Thanks
> Godwin
>
> --
> *Godwin Amila Shrimal*
> Associate Technical Lead
> WSO2 Inc.; h
Hi All,
$subject.
I'm trying to understand the affect of a username change and came across
this table.
Thanks,
Dulanja
--
Thanks & Regards,
Dulanja Liyanage
Lead, Platform Security Team
WSO2 Inc.
___
Dev mailing list
Dev@wso2.org
http://wso2.org/cgi-
Hi,
This issue can be solved by adding Wait activity after the Reply activity.
Adding Wait will break executing the activities synchronously.
Please refer [1] for more information.
[1] https://wso2.org/jira/browse/BPS-583
Thanks,
Milinda
On Tue, Nov 28, 2017 at 5:55 PM, Melodias wrote:
> Hi,
+1 for fixing this. This is common nuisance when deploying registry
artifacts, usually when we add new artifacts through the devS UI at times
the ones which had 'EnterpriseServiceBus' reverts back to '
GovernanceRegistry'.
On Tue, Nov 28, 2017 at 5:46 AM, Senduran Balasubramaniyam <
sendu...@wso
Hi,
It is possible to do process in the next steps:
1. Receive Input
2. Prepare Reply message
3. send reply
4. do somethink like invoke backend
When I call process, I get Reply after step 4, not in step 3
--
Sent from: http://wso2-oxygen-tank.10903.n7.nabble.com/WSO2-Development-f3.html
___
Your payload factory contains an invalid JSON
On Fri, Nov 24, 2017 at 7:27 PM, Lahiru Cooray
wrote:
> Hi team,
> Im using ESB 5.0.0 and trying to validate a json payload against a schema.
> Below is my sample synapse code snippet
>
>
>
>
>
>
Hi Dushantha,
Its seems your port is already used. Please check on it again
Thanks,
*Senuwan Withana*
Software Engineer - Support Team | WSO2
Email : senu...@wso2.com
Mobile: 94773212853
Web: http://www.wso2.com
On Tue, Nov 28, 2017 at 5:09 PM, Dushantha Batuwita
wrote:
> Hi Dev
>
> I have
+1 for fixing this. since G-Reg is no longer active
Anyway Godwin, if you have created a ESB solution project the server role
is by default set to EnterpriseServiceBus
On Tue, Nov 28, 2017 at 2:17 PM, Vinod Kavinda wrote:
> Hi Godwin,
> Thanks for the update. Reported the issue [1]
>
> [1] - htt
It seems your port is currently in use. Use *fuser -k 80/tcp*
On Tue, Nov 28, 2017 at 5:09 PM, Dushantha Batuwita
wrote:
> Hi Dev
>
> I have installed the nginx and when I try starting the nginx, I
> receive following error.
>
> sudo service nginx start
>
> Job for nginx.service failed becaus
Hi Dushantha,
It seems the port 80 is already in use on your local machine. It is an
Apache port. You need to kill the processes running and restart the Nginx
server again.
On Tue, Nov 28, 2017 at 5:09 PM, Dushantha Batuwita
wrote:
> Hi Dev
>
> I have installed the nginx and when I try startin
It seems something else is already running on your port 80
On Tue, Nov 28, 2017 at 5:09 PM, Dushantha Batuwita
wrote:
> Hi Dev
>
> I have installed the nginx and when I try starting the nginx, I
> receive following error.
>
> sudo service nginx start
>
> Job for nginx.service failed because th
Hi Dev
I have installed the nginx and when I try starting the nginx, I
receive following error.
sudo service nginx start
Job for nginx.service failed because the control process exited with error
code.
See "systemctl status nginx.service" and "journalctl -xe" for details.
when I check the
Hi Thilini,
Thank you for the explanation and according to Buddhimala I have added a
custom response for the status code 202 and it works fine.
Thanks.
Piriya
On Mon, Nov 20, 2017 at 9:53 AM, Thilini Shanika wrote:
> Hi Priya,
>
> It seems like you are getting a SOAP response with an empty
>
yes seems its the same issues. I was able to resolve it by following the
steps in that thread.
Cheers,
NuwanS.
On Tue, Nov 28, 2017 at 3:31 PM, Anuruddha Liyanarachchi <
anurudd...@wso2.com> wrote:
> Hi Nuwan,
>
> Are you using a load balancer to access the KM node? A similar issue is
> discusse
Hi Nuwan,
Are you using a load balancer to access the KM node? A similar issue is
discussed in mail thread[1] where nginx sending a wrong certificate if the
client doesn't send SNI information to the server.
[1] Publisher/Store nodes are throwing an error "unable to find valid
certification path
Hi Nuwan,
Have you generated KeyStore for all the nodes? CN property belongs to
KeyStore. What's the value you have given to CN when you generate KeyStore?
Importing public keys to each other's client-truststore don't have any
impact on this problem.
On Tue, Nov 28, 2017 at 11:29 AM, Isuru Hathth
Hi Godwin,
Thanks for the update. Reported the issue [1]
[1] - https://github.com/wso2/product-ei/issues/1428
Regards,
Vinod
On Tue, Nov 28, 2017 at 2:02 PM, Godwin Shrimal wrote:
> Thanks for the response guy, I could resolve it by setting
> "EnterpriseServiceBus" server role when exporting c
Hi,
Thank you for the response. I changed my configuration as mentioned above
it's working.
Thanks
Dilusha
On Mon, Nov 27, 2017 at 3:35 PM, Senduran Balasubramaniyam <
sendu...@wso2.com> wrote:
> Also you need to use the template with + sign since its value can contain
> @
>
> uri-template="/{
Thanks for the response guy, I could resolve it by setting
"EnterpriseServiceBus" server role when exporting car file. I think this
should work OOB, best thing is adding "GovernanceRegistry" in carbon.xml
under server roles.
Thanks
Godwin
On Mon, Nov 27, 2017 at 12:23 PM, Sashika Wijesinghe
45 matches
Mail list logo