to svn trunk:
2018-08-28 Stipe Tolj
* doc/userguide/userguide.xml: fixed 'window' value type for GSMA
OneAPI.
Thanks to Franck Lamasuta for this patch.
--
Best Regards,
Stipe Tolj
---
Düsseldorf, NRW, Germa
t the
conn_unregister() would raise an assertion panic here.
Suggested patch simply removes the gw_assert() check and leaves it to
the function to test (what it does) to bail out if the conn is NULL.
If no objections arise, will commit to svn trunk.
Stipe
--
Best Regards,
Stipe
null.
This prevents from resources leak.
Hi Alex,
hope you're doing fine.
I agree, committed a fix for the possible PANIC condition by
pre-checking before calling conn_unregister() in the handle_transaction().
Stipe
--
Best Regards,
Stipe
routing.
The attached patch adds this capability.
Please review. If no objections arise I will commit this within the next
days.
Cheers,
Stipe
--
Best Regards,
Stipe Tolj
---
Düsseldorf, NRW, Germany
Kannel Foundation
Am 01.10.2018 14:56, schrieb Stipe Tolj:
Hi all,
the reloading of the config (aka graceful restart) supports the
on-th-fly manipulation of the upstream SMSC groups and the corresponding
routing constraints for them.
What is doesn't support is the on-the-fly changing of the 'grou
27;t understand the argument with "smsc is renamed in new config but
still used in the old smsbox group". Could you please explain?
Cheers,
Stipe
--
Best Regards,
Stipe Tolj
---
Düsseldorf, NRW, Germany
Kannel
Am 17.10.18 10:42, schrieb Stipe Tolj:
hmm, yes we do this intentionally actually.
We destroy the structures, then re-parse the 'group = smsbox-route'
groups from the configuration. If a group has an error, we only dump the
error but continue to parse the following groups.
A res
the MWC via our
main web site URL http://www.kannel.org/, or via the direct interface to
the scheduling planer via URL
https://kannel.appointlet.com/
We're looking forward to see you at MWC in Barcelona.
--
Best Regards,
Stipe
the MWC via our
main web site URL http://www.kannel.org/, or via the direct interface to
the scheduling planer via URL
https://kannel.appointlet.com/
We're looking forward to see you at MWC in Barcelona.
--
Best Regards,
Stipe
he MOs in the bearerbox access-log and the smsbox
access-log though.
It MAY BE an option to think about a config directive for the SMSC AT
module to "turn off" MO interpretation and simply drop anything we get
on the modem.
@devel: Anyone from the SMSC AT developer folks that wants to pi
--
Best Regards,
Stipe Tolj
---
Düsseldorf, NRW, Germany
Kannel Foundation tolj.org system architecture
http://www.kannel.org/http://www.tolj.org/
st...@kannel.org s...@tolj.org
---
his would be a good time to have another round of stable release
declared and then go on with the changes/commits to result in a new
devel release.
--
Best Regards,
Stipe Tolj
---
Düsseldorf, NRW, Germany
Kannel Foundation
Am 04.06.20, 10:33, schrieb Alexander Malysh:
Hi Stipe,
not tested, but looks ok. +1
thanks Alex for a quick review. Committed now to svn trunk.
P.S. Let’s do a new stable release.
yep, preparing things for a new 1.4.6 stable release.
--
Best Regards,
Stipe Tolj
uation IMO.
Resolution should be simply to move the http_caller_signal_shutdown()
before gwthread_join_every(obey_request_thread) in the shutdown sequence.
Any comments, reviews are highly welcome.
Stay safe all,
Stipe
--
Best Regards,
Stipe Tolj
--
Am 05.11.20, 10:41, schrieb Stipe Tolj:
Hi all,
I got across and issue on the shutdown sequence of Kannel smsbox, that
seems to me like a potential dead-lock situation while shutdown phase.
On a loaded system bearerbox was SIGHUP'ed and hence instructed it's
connected smsbox to g
.
- Microsoft .net: 120 sec.
- Firefox: 30 sec.
- node.js: 60 sec.
so, 30s seems fine to me. I was almost in favor of going lower. But that
may be too low. Let's stick with 30s.
Changing and committing to svn trunk.
--
Best Regards,
Stipe
minds of his family, his persona will keep on
living in his work he contributed with passion to our project. Honoring
his contributions is our privilege and determination.
Rest in peace René Kluwen (* 10-05-1970, ✝ 06-06-2021)
https://kannel.org/images/rouwkaart_rene.png
--
Best Regards,
Stipe
family, friends or both.
Stay responsible, stay safe.
Stipe
--
Best Regards,
Stipe Tolj
---
Düsseldorf, NRW, Germany
Kannel Foundation tolj.org system architecture
http://www.kannel.org/http://www.tolj.org
nk gateway
$ cd gateway
$ ./boostrap.sh
$ ./configure [..]
$ make
$ sudo make install
Stipe
--
Best Regards,
Stipe Tolj
---
Düsseldorf, NRW, Germany
Kannel Foundation tolj.org system architecture
http://www.
ing a SMPP interface
The "same" can be achieved using Kannel infrastructure by using Kannel
bearerbox to connect to the upstream GSM modem or a pool of modems, and
smppbox for the SMPP v3.4 interface on the downstream side.
--
Best Rega
ages/sec)
If SMSC requires that Kannel limits the number of messages per second,
-use this variable. This is considered as active throttling. (optional)
+use this variable. This is considered as active throttling. It
constraints
+both sides, MT and MO with the same value. (optional)
+throughput-mt (r)
+ float (me
Am 03.06.22, 17:08, schrieb Stipe Tolj:
Hi all,
in certain conditions it may be feasible also to have MO throughput
control in terms of regulating how many messages we want to handle on
the MO side (including DLRs).
For this purpose I have prepared the attached patchset, that introduces
the
.
access-log-utf8 = yes
which then allows dumping of UTF-8 as wide char (wchar) types in the code.
Please review and test, comments as always welcome.
Thanks,
Stipe
--
Best Regards,
Stipe Tolj
---
Düsseldorf, NRW, Germany
Kannel
the MWC via our
main web site URL http://www.kannel.org/, or via the direct interface to
the scheduling planer via URL
https://kannel.appointlet.com/
We're looking forward to see you at MWC in Barcelona.
--
Best Regards,
Stipe
Kalle Marjola wrote:
I have a release proposition, to be done ASAP:
* release current CVS as 1.4.0 (ChangeLog seems to be mainly fixes)
* then (after one week or so) release CVS as 1.5.0, I will add my
bearerbox-ack -patch to CVS before this release, possible add
other patches lying aroun
Peter Löfman wrote:
Hi list,
I recall that there was a patch available which makes it possible to send
OMA style ota config to phones. Is it available from somewhere?
If compiling the WBXML document with some other compiler, and then sending
with kannel as binary data, does anyone have an example h
Kalle Marjola wrote:
On Fri, 2004-10-22 at 06:25, Alejandro Guerrieri wrote:
I'd suggest you to use 1.3.2. It is as stable as 1.2.1 but it's a lot
more functional.
This reminds: could we get new stable release at some point?
(new devel release wouldn't hurt that much either ... no matter
if there
Thomas Göttgens wrote:
Hello,
KM> This reminds: could we get new stable release at some point?
KM> (new devel release wouldn't hurt that much either ... no matter
KM> if there has not been many updates, we could simply say like
KM> '1.3.3 is almost like 1.3.2, no need to upgrade unless...)
[...]
KM
The Kannel Group is pleased to announce the availability
of the Kannel 1.4.0 stable release via the project web site
http://www.kannel.org/
--
NEWS about Kannel: Open Source WAP and SMS Gateway version 1.4.0
This is a STABLE version. It should be usable for production systems.
Please do report pr
Kalle Marjola wrote:
Thanks Stipe!
ohh.. please, no vine for me... it's been more then necessary ;)
Now I propose that we add to CVS head:
* new smsstore (that directory thing I guess, unfortunately I have had
no time to test it... is there limit to how many files can be in a
directory?)
* reply
Enver ALTIN wrote:
On Thu, 2004-11-25 at 16:35 +0200, Kalle Marjola wrote:
Thanks Stipe!
Yeah, congrats to everybody! Do we have a party soon? :-)
actually we should... but the problem is where? Most of us guys in spread
accross europe ;)
Stipe
mailto:stolj_{at}_wapme.de
Hillel Bilman wrote:
Dear Kannel Devel,
Well done on the latest Kannel stable release.
thanks a lot. I have to add my thanks to all developers who made improvements
into Kannel possible and to the numerious people using the software and
reporting bugs... this is what open source is all about... c
Hi list,
for all developers with cvs access, please obey to commit bugfixes that are
logically fixing issues in the current 1.4.0 stable release to _both_ branches:
HEAD and stable_1_4_0
We will use the stable_1_4_0 branch to release an updated stable release called
1.4.1 after some fixes have
Oscar Medina Duarte wrote:
Hello,
Just with a simple fast question for the proper guy to answer:
Where is the implementation of :
encode_network_long(char *, long int)
thank's to all !
hmmm... not very tricky to find, simply use a recursive search, and you'll find
the implementation at g
ding dingding wrote:
?
?V naually gateway-1.4.0]# ./configure --disable-docs --disable-ssl
--with-mysql
loading cache ./config.cache
Configuring for Kannel gateway version 1.4.0 ...
Running system checks ...
checking host system type... i686-pc-linux-gnu
checking for gcc... (cached) gcc
checking
forwarding to the list.
Stipe
mailto:stolj_{at}_wapme.de
---
Wapme Systems AG
Vogelsanger Weg 80
40470 Düsseldorf, NRW, Germany
phone: +49.211.74845.0
fax: +49.211.74845.299
mailto:info_{at}_wapme-systems.de
http://www.wapme-systems.de
Hi list,
Kannel has currently no package maintainer for the FreeBSD port, and it seems
also that Kannel is broken on the FreeBSD alpha64 platform.
Anyone here in the list that has a vital connection/access to an FreeBSD alpha64
machine and could grant the Kannel group/developers access to it for
Wishing you all that contribute in this great effort that we call Kannel,
a pleasent and warm merry christmas!
We're all looking forward to push Kannel in the next year even one or two steps
further on. ;)
Merry christmas and a happy new year!
Stipe
mailto:stolj_{at}_wapme.de
Oscar Medina Duarte wrote:
Hi list !
I think something is wrong, see, I need to run smsbox and bearerbox in
different computers, but happens that when ever I run smsbox -d -P
configfile it just terminates !
I dont achieve a connection with my bearer with that option, unless it
is in the same comput
[EMAIL PROTECTED] wrote:
Hello Stipe ,
Hello all,
I'm a very old user for kannel , and I used to compile it on
cygwin-windows 2003 server and it was working fine till compiled the last
stable 1.4.0 then problems started bearerbox takes 100% of the cpu and I
lose the store file if I restarted kanne
Enver ALTIN wrote:
Hi,
On Mon, 2004-12-27 at 13:13 -0600, Oscar Medina Duarte wrote:
I've compiled kannel on debian 3.1 and ran the same config I'm runing
in other versions of debian, Fedora and MAC OS X, but the different
thing here is that it makes around 9 processes only for the bearerbox!
They
Davy Chan wrote:
I've submitted a patch for bug #032 to the Mantis bug tracking
system. It's 381K in size. Should I submit it also to the devel
mailing list?
This patch does not have the renaming of all "List" structures to
"gw_List". If the "list_XXX" to "gw_list_XXX" patch is accepted,
then
Edgar Zavala wrote:
I compiled succesfully some time ago Kannel using the Cywin
(http://www.cygwin.com) development tools on Windows 2000 server and
it work great, i used the irComm driver from (http://www.ircomm2k.de/)
and a T68i cell phone as ir modem to send and receive SMS messages.
confirm
Alexander Malysh wrote:
Hi together,
hopefully all of us have overcome those long new year holidays and are back
to normal live & development ;)
attached you can find a patch that includes some http server fixes:
- don't close listen filedescriptor when accept failed (that can be caused
bei client
Alexander Malysh wrote:
Hi,
Davy Chan wrote:
Well, it's been about 12 days since I tried to submit the patch
but it still has not been acted on by the moderator of the
devel@kannel.org mailing list.
I'm not aware of any moderator...
our mailing list moderator is equal to the system admin at Trige
Davy Chan wrote:
**>To: devel@kannel.org
**>From: Alexander Malysh <[EMAIL PROTECTED]>
**>Subject: Re: [PATCH] Kannel bug #032 otherwise known as kannel's list
**> functionnaming clashes with latest mysql list function naming
**>Date: Wed, 19 Jan 2005 17:02:28 +0100
**>
**>Hi,
**>
**>D
Alexander Malysh wrote:
Hallo together,
attached you can find a patch that adds backtrace support to gwmem-check.
w/o backtrace is this module really hard to use.
Comments and votes please!
reviewed and tested. Looks good. +1 for cvs commit.
Stipe
mailto:stolj_{at}_wapme.de
Kalle Marjola wrote:
Looks great, and this is a _must_ for 1.4.1 I think.
1.4.1 and 1.5.0 would be nice to get out at some point.. we
did not get it out before end of the year but how about now?
ok, which means we release 1.4.1 stable as stable update to 1.4.0. +1 on
this.
What about 1.5.0 as dev
Alexander Malysh wrote:
Kalle Marjola wrote:
On Thu, 2005-01-20 at 17:26, Alexander Malysh wrote:
Hi Kalle,
I don't think it's the right time now. see mantis & ML (users and devel)
for bugs that should be fixed first...
As I know it takes some time to get it finally out, my comment meant
mainly '
Alexander Malysh wrote:
Hi Stefan,
this bug is fixed in cvs. see my comment & bug status (resolved).
confirming the fix. Build on gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)
runs OOTB.
Stipe
mailto:stolj_{at}_wapme.de
---
Wapme
Enver ALTIN wrote:
Hi,
On Thu, 2005-01-20 at 16:46 +0100, Stipe Tolj wrote:
1.4.1 and 1.5.0 would be nice to get out at some point.. we
did not get it out before end of the year but how about now?
ok, which means we release 1.4.1 stable as stable update to 1.4.0. +1 on this.
I think we need to
Enver ALTIN wrote:
Hi,
On Thu, 2005-01-20 at 16:46 +0100, Stipe Tolj wrote:
1.4.1 and 1.5.0 would be nice to get out at some point.. we
did not get it out before end of the year but how about now?
ok, which means we release 1.4.1 stable as stable update to 1.4.0. +1 on this.
I think we need to
Paul P Komkoff Jr wrote:
Ok well, yes I know I was offline fot _too_ _long_. I can't promise I
will not do the same again :)
Now, to the kannel. Guess what Siemens SX1 latest firmware sends in
request headers? It sends an \0x80 \0x00! Of course kannel is unable
to do anything useful, because Accept
Paul P Komkoff Jr wrote:
Ok well, yes I know I was offline fot _too_ _long_. I can't promise I
will not do the same again :)
Now, to the kannel. Guess what Siemens SX1 latest firmware sends in
request headers? It sends an \0x80 \0x00! Of course kannel is unable
to do anything useful, because Accept
Hi Paul,
instead of pocking arround in the wsp_field_value() prototype like in your
patch, I'd suggest the following patch, that should work IMO for any generic
header type that is 0x00'ed for the value.
Can you test with SX1 and confirm? It would be more cleaner IMO.
Stipe
mailto:stolj_{at}_wap
Vjacheslav Chekushin wrote:
Just remark.
SX1 behavior _NOT_ conforms to wap specification, because besides general
encoding there is well-known encoding for Accept header:
8.4.2.7 Accept field
The following rules are used to encode accept values.
Accept-value = Constrained-media | Accept-general-fo
Stipe Tolj wrote:
Hi Paul,
instead of pocking arround in the wsp_field_value() prototype like in
your patch, I'd suggest the following patch, that should work IMO for
any generic header type that is 0x00'ed for the value.
Can you test with SX1 and confirm? It would be more cleane
Alexander Malysh wrote:
please find attached patch that implements http server & client idle
timeout. In order to efficient handle timeouts and don't start "yet another
thread" we use already available fdset's threads. With this patch applied
we will have a possibility to set timeout for all filede
Ok,
regarding the Siemens SX1 kludge and the WSP headers with as
only value byte, I'd like to get at least a vote for commiting this patch from
the following developers:
Aarno, Paul, Slava
please.
You guys haven't stated yet nothing regarding a vote. Please do so. I'd like to
keep it that wa
Hi Marcus,
Marcus Schmöger wrote:
Hi,
I would like to know about the current status of WTLS integration into
Kannel.
The info on the website is somewhate ambiguous about this.
At http://www.kannel.org/addons.shtml one of the three addons (the one
from 3ui) is not available anymore.
It is still a
Hi list,
any crypto gurus arround who are willing to pick up the WTLS code for review and
adding the kwtls (external add-on module) to the existing code?
See Mantis bug#038 and http://www.kannel.org/download/wtls/ for more details on
the WTLS stack.
I'd like to see this getting going to someone
Alexander Malysh wrote:
Hi together,
hopefully all of us have overcome those long new year holidays and are back
to normal live & development ;)
attached you can find a patch that includes some http server fixes:
- don't close listen filedescriptor when accept failed (that can be caused
bei client
Alexander Malysh wrote:
Hi together,
attched you can find a patch that change behaviour in communication thread
creation. With this patch threads are created only _after_ successful
accept and so eliminate possible DOS (IMHO: it's unwise to popup thread
before check whether this box allowed/denied)
Stefan Radman wrote:
Hi,
I've submitted a bug to the Mantis system and followed up with a patch
(attached to the bug).
Can someone review the patch and see if it's acceptable?
Alex seems to be very busy ;-)
All the necessary info is in the bug track.
commited to cvs, in slightly reduced form.
Thank
David wrote:
Hi,
i've tried using wvdialconf and according to it, my gsm modem seems
working fine, here is the output from wvdialconf:
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- OK
ttyS0<*1>: ATQ0 V1 E1 Z -- OK
Hi Enver,
Enver ALTIN wrote:
Hi,
On Tue, 2005-01-25 at 15:32 +0300, Roman wrote:
I have kannel 1.4.0 and some scripts, which used in exec
statement in kannel.conf service section. These scripts can return
result in UCS2 or GSM coding(english or another language).
Is there way in kannel(without patc
Alexander Malysh wrote:
Kalle Marjola wrote:
On Thu, 2004-10-07 at 12:52, Alexander Malysh wrote:
Hi Kalle,
patch looks good except this "really horrible kludge"...
Well I thought that first check it out and if people like it
and we decide what to do about it (see choices a, b and c)
then I bother
Kalle Marjola wrote:
On Fri, 2005-01-28 at 09:29, Kalle Marjola wrote:
AFAIK, this has yet not been commited to cvs, right?
Nope, I just digged it out..
I can commit it to CVS (change things commented when I last time sent it
out) right now..
This is now committed to CVS.
Please all note that this
Enver ALTIN wrote:
On Fri, 2005-01-28 at 10:10 +0200, Kalle Marjola wrote:
On Fri, 2005-01-28 at 09:29, Kalle Marjola wrote:
AFAIK, this has yet not been commited to cvs, right?
Nope, I just digged it out..
I can commit it to CVS (change things commented when I last time sent it
out) right now..
Th
Matthew Hixson wrote:
Any chance we could get the dlr notification to include the message_ids
that can be found in bearerbox.log?
Thanks,
-M@
ok, picking this up here from the architecture design perspective.
Mainly the request is to have a "way" in getting the protocol-specific
message-id
Aarno Syvänen wrote:
Have you tested the modification ? What will be result of parsing 0x80
0x00 ? Accept:
is ok according the rfc 2616. (Because this is a low level parsing
function, you definitely want to test.)
Aarno, did you have chances to test this with various phones?
Stipe
mailto:stolj_{a
Peter Beckman wrote:
Dear Kannel Developers:
I've written about this before, but I thought I would bring it up again
because I hate patching.
Many SMSC's are starting to use the optional SMPP parameters for
information like billing issues, carrier failures, etc. Kannel really
doesn't allow for thi
Paul Bagyenda wrote:
Hello All,
As well as putting the Mbuni MMS Gateway out, I have updated the patches,
previously posted here, to enable Kannel send OTA settings using OMA
formats. Please see
mbuni.org for details.
*very interesting*.
Just tried to give it a configure try on cygwin, but con
Davy Chan wrote:
If you want to guarantee that the mobile user goes through your
Kannel gateway, then setup a modem pool (either analog or isdn)
and have the user make a Circuit Switched Data (CSD) dialin to
your modem pool. The user's phone will then setup a
PPP connection for Internet access thr
Pommnitz, Jörg wrote:
Never tried this, but shouldn't it be possible to access Kannel either
through
Bluetooth or IRDA as well? It should not really be necessary to connect
through
the PLMN.
Did anybody ever try this?
nop. But from theory aspect this should be possible. Since Kannel doesn't care
a
fred wrote:
after doing a ./configure the version string is always "cvs-", ( not
building from kannels cvs)
my usual procedure is to then edit gw-config.h and change the #define
GW_VERSION
to something descriptive to our version.
This is a real problem and pain in the ... when i am copying the sam
Hi Davy,
Davy Chan wrote:
Already gzip'ed before submitting the patch to the mailing list.
Since the patch touches over 100 different files, the resultant
patch was still 80K after gzip'ing. After base64'ing it for email
transport it pushed the size over the 100K limit of the mailing list.
I've als
Davy Chan wrote:
**>Date: Fri, 7 Jan 2005 01:25:48 +0100
**>From: Alejandro Guerrieri <[EMAIL PROTECTED]>
**>To: "devel@kannel.org"
**>Subject: Re: Is it possible to set up the esm_class for Kannel?
**>In-Reply-To: <[EMAIL PROTECTED]>
**>
**>Olga,
**>
**>You're welcome. It's not the first time som
Sergey Saukh wrote:
Hi,
I have Kannel 1.3.2 version installed. It works fine, but I've encountered a
one problem:
I have 2 smsc definitions (listed below) and some services set up for use with
those smsc. When sms arrives, kannel looks from what smsc and for what msisdn
it was and passes it to
Hi Jonathan,
can you please resend the patch request with a mail stating what changesets (as
Alex described) have been added (with subject [PATCH]) to the devel list, so we
can have this "scheduled" for review. Thanks in advance.
@Alex: any votes from your eyes here?
Stipe
mailto:stolj_{at}_wapm
Rene Kluwen wrote:
Because I know that gwlib serves more purposes than just Kannel: How about
creating a seperate CVS tree for it and distribute it independantly?
Just a thought.
hmmm, this would go into the Apache portable runtime (apr) issue, right?
I don't think the code is that "good" splited
Peter Farmer wrote:
Hi,
I have been scanning the user doco and reading the mail archives, but havent
been able to find an answer . I hope that someone on the list can set me
straight. We have set up kannel to channel MO SMS's to a 3rd parties web
application servers. Which works quite well. The
Jayabharathi wrote:
Hi,
I am using Kannel wap gateway for testing my MMS client.
For this I have installed Kannel gateway in a PC(IP address = 107.108.72.208)
My test setup is like this
MMS Client <->Kannel WAP GW <> Now SMS/MMS (MMSC)
Peter Farmer wrote:
Developers,
I have asked this question on the users list , but have had no response. Since
it appears to be a bug I guess maybe I should have tried this forum first,
but I was not sure that it wasn't just my misunderstanding of kannel
configuration options. Can anyone help sh
Alexander Malysh wrote:
Hi together,
I would like to get a votes on how to rename list_XXX functions.
In all our current places we use gwXX_XX (e.g. gwthread/gwfree/etc) notation
but we now have a patch for #32 that uses gw_XX notation. which is the
best?
P.S. I'm +1 for gwlist_XXX notation and +0
Matti Ärmänen wrote:
Hello!
I have used Sony Ericsson GT47 GSM-modem with kannel. GT47 is based on
the GR47-module.
Note, the init-string is different depending on sim-buffering setting.
The configuration is in attachment as diff to modems.conf
Regards, Matti
-
Davy Chan wrote:
**>Date: Fri, 4 Feb 2005 10:03:41 -0500 (EST)
**>From: Peter Beckman <[EMAIL PROTECTED]>
**>To: Stipe Tolj <[EMAIL PROTECTED]>
**>Subject: Re: [Kannel-Users] [RFC] Re: Fwd: [Kannel-Users] Re: SMS message ids
**>In-Reply-To: <[EMAIL PROTECTED]>
**&g
Davy Chan wrote:
**>Date: Mon, 7 Feb 2005 18:04:41 -0500 (EST)
**>From: Peter Beckman <[EMAIL PROTECTED]>
**>To: Davy Chan <[EMAIL PROTECTED]>
**>cc: Stipe Tolj <[EMAIL PROTECTED]>, devel@kannel.org
**>Subject: Re: [Kannel-Devel] Re: [Kannel-Users] [RFC] Re: Fwd: [
Hi list,
I recall that we had a thread on "how" to add SMPP optional parameters, in a
generic way. Did this proceed to an consensus?
I don't see a way to make it the way Peter supposes it here.
Stipe
mailto:stolj_{at}_wapme.de
---
Wa
Alexander Malysh wrote:
nope and IMO it's not needed. just don't send ack/nack to bearerbox as long
the message is not processed and bearerbox will do the job for free.
+1, did you have this inside your tree to addopt to cvs? It will require some
work, since you have to make sure bearerbox does no
Olga Rudchenko wrote:
My secured data should be 47 in Hex, 8 bit binary. Becouse of this I use coding=2. Can it cause any problem?
did you try to pass the binary sms *without* the 'coding' variable. Kannel
switches the internal mode to binary, when udh is given.
Stipe
mailto:stolj_{at}_wapme.de
-
Alexander Malysh wrote:
Stipe Tolj wrote:
Rene Kluwen wrote:
Because I know that gwlib serves more purposes than just Kannel: How
about creating a seperate CVS tree for it and distribute it
independantly?
Just a thought.
hmmm, this would go into the Apache portable runtime (apr) issue, right?
I
Magnus Byrkjeflot wrote:
I'm having some problems using an GSM modem as SMSC. I am using a
AMD64 machine on Fedora Core 3. Have tried the same settings with two
phones Siemens M50 and Nokia 6310i. Both have worked before on i386
older kannel. I'm using CVS version.
Anybody else encountered this err
SÃren Hansen wrote:
man, 31 01 2005 kl. 18:37 +0100, skrev "Pommnitz, JÃrg":
Hi List,
an interesting (and somewhat hypothetical) question: Where to send
the m-notifyResp.ind in a MMS client?
To the MMS Proxy-Relay as configured on the phone. That is the same
place to which it sends M-Send.req, etc
Alex Judd wrote:
Hi everyone
We're setting up DLR redirection into mySQL using the dlr-storage parameter
in the core group, and it would appear that the octstr_compare in the dlr.c
is not behaving as it should do.
Three basic tests.
1. Setup for internal (works)
[config]
dlr-storag
Alex Judd wrote:
Thanks Alex - yes you're right - the --with-mysql and --with-mysql-directory
configuration parameters fixed the issue.
Interestingly though I couldn't see any if/defs in the code to stop the
check being valid as it was reporting in the tests?
/*
* assume we are using inter
Enver ALTIN wrote:
Hi,
Forwarding here with hope to find an answer :)
Thanks,
Forwarded Message
From: Enver ALTIN <[EMAIL PROTECTED]>
To: users@kannel.org
Subject: Requesting DLR for binary messages
Date: Mon, 31 Jan 2005 16:39:10 +0200
Hi,
I'm developing an application which send
Alexander Malysh wrote:
Hi together,
please find attached patch that adds support for glibc malloc hooks and so
make it possible to debug memory problems in external libraries.
Comments?
as far as this does not brake other os, I'm +1.
There is no behaviour change, right?
Stipe
mailto:stolj_{at}_wap
Johann du Preez wrote:
2. I cannot, for the life of me, get aliases to work for sms-services.
None of the aliases for any of the services specified below works.
put ";" as value, ie.
# SMS SERVICES
group = sms-service
name = sdt
keyword = sdt
aliases = "shinfo;sharedata"
url = "http://22.22.22.22
Johann du Preez wrote:
Hi,
I installed Kannel 1.4.0 on a Fedora core 2 box and it is working fine.
Thanks for all your efforts.
However, I discovered the following two things which I think may be bugs:
1. I use postgresql (v 7.4.6) for dlr-storage, as can be seen from my
config file below. How
201 - 300 of 1944 matches
Mail list logo