hey guys, I am trying to customize a os703 image without booting up into Sugar. I am using the following currently, but getting some stttrrraaaange errors.
http://wiki.laptop.org/go/Mounting_jffs2_images here is what I have done losetup /dev/loop0 os703.img modprobe block2mtd block2mtd=/dev/loop4 cat /proc/mtd # inspect status mkdir mtd modprobe jffs2 mount -t jffs2 mtd0 mtd make changes then umount /mnt/mtd modprobe -r block2mtd losetup -d /dev/loop0 How to create new crc: git clone git://git.fedoraproject.org/git/pilgrim cd pilgrim/crcimg make ./crcimg myfile.img Then I take my new images and copy it to an XO with the command copy-nand u:\newimage.img It successfully writes over the current flash image Then I type in boot at the Forth prompt. This produces a ton of JFFS2 warnings "bad summary on node" on boot and ends in a page fault Any ideas? The "Mounting jffs2 images" wiki page says the following "If you want to write to the image, you may need to pad it with several blocks of 0xFFFF bytes." I have no idea how to do this. Would this solve my problem and if so, could someone explain to me how to do it? thanks -- Bryan W. Berry Systems Engineer OLE Nepal, http://www.olenepal.org _______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel