Oleg,
I'm a contributor to OpenWSN, making a first post here based on your
mention below.
On 03/17/2015 02:58 PM, Oleg Hahm wrote:
Hi Joakim!
What is the current state of radio duty cycling in RIOT?
I know that radio drivers implement on and off functions for the chip, but
how do we make
On Tue, Mar 17, 2015 at 4:31 PM, Ken Bannister kb...@runbox.com wrote:
Oleg,
There's definitely a need for generic MAC layer solutions in RIOT,
besides the
specific solutions like CSMA in the cc110x driver or TiSCH for 802.15.4e
as
part of the OpenWSN stack. As far as I know, at least
Hi Ludwig,
That's fine :-)
Great! I'm looking forward to seeing it.
I'm not on a early deadline but you know the sooner it is, the better it
will be ;-)
Cheers,
2015-03-17 15:45 GMT+01:00 Ludwig Ortmann ludwig.ortm...@fu-berlin.de:
Hi Baptiste,
I was/am extremely busy with non-RIOT work, so
Hi Oleg,
Thanks for your quick reply :-)
May I ask you what exactly you're planning to do there? To the best of my
knowledge the Thread specification will be only released to some members of
the partners in June.
Your absolutely right. What I'm doing is trying to implement communication
Hello David,
2015-03-17 0:02 GMT+01:00 David Lyon david.l...@clixx.io:
Hello Ludwig,
Lately, I've been putting a lot of time into the ESP8266 wifi modules, and
learning how to get them to work.
How is the unified network driver system going?
Here's my conclusion on the ESP8266. If Riot
Hello Joakim,
currently there are no specific plans to utilize the power modes of the
radios to my knowledge, except that mostly MAC/link layers will implement
it. So if you have any idea: feel free to speak about it.
Cheers,
Martine
2015-03-17 10:05 GMT+01:00 Joakim Gebart
Arvid, Ludwig, any improvements concerning OTA?
Cheers,
2015-03-09 15:12 GMT+01:00 Baptiste Clenet bapcle...@gmail.com:
Hi,
Ludwig, how is the planning going ?
Could you create a wiki page (like [1]) or an issue (like [2]) with
description of the work to do as well as assignment for
Hi Chen,
I can remember having the same problem with the telosb. I traced it down
to the fact, that there are no interrupts triggered. Which is strange
as the same code is working on an other msp430/cc2420 platform (Zolertia Z1).
Maybe a misconfiguration somehow sneaked into the radio driver
Hello RIOTers,
What is the current state of radio duty cycling in RIOT?
I know that radio drivers implement on and off functions for the chip, but
how do we make the best use of them?
In order to reduce power consumption it will be necessary to duty cycle
the radio
.
For comparison, in
hi ,
this is the diagram used for BLE software architecture
what is host and controller in this figure ?
Is this the correct way to approach the Project N2 - BLE stack?
thank you
--
Regards
Kausthub Naarayan B
___
devel mailing list
Hi Martine,
On 2015-03-17 20:49, Martine Lenders wrote:
We currently don't have an example for an embedded stack, but I guess
the ESP8266 would be great to supply such an example. Since the
ESP8266 supplies, as far as I understand it, everything up to tcp and
udp, I would propose not to write
Hi Thomas,
On Fri, Feb 20, 2015 at 10:53 AM, Thomas Eichinger
thomas.eichin...@fu-berlin.de wrote:
Hi Joakim,
On 20 Feb 2015, at 9:31 CET(+0100), Joakim Gebart wrote:
Thank you for the prompt response. I will start reading the existing
drivers but I think I will wait at least until there is
Hi Joakim,
sorry for the silence on this. The driver is almost ready I’ll open a
PR for it by Thursday at latest. I was discussing with Hauke the initialisation
process for the network stack and also initialisation in general.
I saw these memory corruptions too, but didn’t manage to identify the
Hi Baptiste,
I was/am extremely busy with non-RIOT work, so please bear with me ;)
An update will follow soonish.
If you're on a deadline say so and I can look if I can squeeze it in somehow.
Cheers,
Ludwig
Baptiste Clenet schrieb:
Arvid, Ludwig, any improvements concerning OTA?
Cheers,
Hi Craig,
We have a 802.15.4 transceiver that is capable of 250kbps. We are
thinking of using this with a Cortex M0+ but wanted to make sure that
the M0+ would have the processing power to handle the
802.15.4/6lowpan/ipv6 stack at a datarate of 250kbps.
I just wondered if anyone had done
15 matches
Mail list logo
