Hello,
I'am testing some Fujitsu-Siemens workstations which have the same video
chip :
102b:0522 Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1)
FSC TX150-S6
FSC TX200-S4
FSC RX100-S5
The 3 computers have the same /etc/X11/XF86Config-4 file.
I've noticed a problem with the TX150-S6 when XFree86 starts : the process
gets stuck in the
PCI detection sequence on the first of 3 identical PCI chips (111d:8018).
After several minutes (between 5 and 10 minutes, I've not measured
exactly), XFree finished the start
sequence and works well after that.
These chips (111d:8018) are found only on the TX150-S6.
On the 2 other computers, XFree86 starts without problem.
Here is the lspci output for the TX150-S6. The chip which blocks the
XFree86 startup is prefixed
by an asterisk. Attached is a detailled output of lspci (-vv).
00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller
(rev 01)
00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI
Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4
port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
(rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA
IDE Controller (rev 02)
01:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E
PCI-Express Fusion-MPT SAS (rev 04)
*02:00.0 PCI bridge: Integrated Device Technology, Inc.: Unknown device
8018 (rev 0e)
03:02.0 PCI bridge: Integrated Device Technology, Inc.: Unknown device
8018 (rev 0e)
03:04.0 PCI bridge: Integrated Device Technology, Inc.: Unknown device
8018 (rev 0e)
04:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
04:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
05:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
06:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755
Gigabit Ethernet PCI Express (rev 02)
07:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot]
ServerEngines (SEP1) (rev 02)
During the "freeze", I noticed that lspci seems unhappy with what he
detects, since all
device classes are detected as ffff (and chip revisions as ff). For
example, the video chip
which normally is :
07:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot]
ServerEngines (SEP1) (rev 02)
becomes :
07:00.0 Class ffff: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines
(SEP1) (rev ff)
So the XFree86 PCI detection code seems to have a side effect on the
system.
Here is the end of /var/log/XFree86.0.log during the "freeze" :
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000003c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,29f0 card 1734,1101 rev 01 class 06,00,00 hdr
00
(II) PCI: 00:06:0: chip 8086,29f9 card 0000,0000 rev 01 class 06,04,00 hdr
01
(II) PCI: 00:1a:0: chip 8086,2937 card 1734,10e0 rev 02 class 0c,03,00 hdr
80
(II) PCI: 00:1a:1: chip 8086,2938 card 1734,10e0 rev 02 class 0c,03,00 hdr
00
(II) PCI: 00:1a:2: chip 8086,2939 card 1734,10e0 rev 02 class 0c,03,00 hdr
00
(II) PCI: 00:1a:7: chip 8086,293c card 1734,10e0 rev 02 class 0c,03,20 hdr
00
(II) PCI: 00:1c:0: chip 8086,2940 card 0000,0000 rev 02 class 06,04,00 hdr
81
(II) PCI: 00:1c:4: chip 8086,2948 card 0000,0000 rev 02 class 06,04,00 hdr
81
(II) PCI: 00:1c:5: chip 8086,294a card 0000,0000 rev 02 class 06,04,00 hdr
81
(II) PCI: 00:1d:0: chip 8086,2934 card 1734,10e0 rev 02 class 0c,03,00 hdr
80
(II) PCI: 00:1d:1: chip 8086,2935 card 1734,10e0 rev 02 class 0c,03,00 hdr
00
(II) PCI: 00:1d:2: chip 8086,2936 card 1734,10e0 rev 02 class 0c,03,00 hdr
00
(II) PCI: 00:1d:7: chip 8086,293a card 1734,10e0 rev 02 class 0c,03,20 hdr
00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 92 class 06,04,01 hdr
01
(II) PCI: 00:1f:0: chip 8086,2916 card 1734,10e0 rev 02 class 06,01,00 hdr
80
(II) PCI: 00:1f:2: chip 8086,2920 card 1734,10e0 rev 02 class 01,01,8a hdr
00
(II) PCI: 00:1f:3: chip 8086,2930 card 1734,10e0 rev 02 class 0c,05,00 hdr
00
(II) PCI: 00:1f:5: chip 8086,2926 card 1734,10e0 rev 02 class 01,01,85 hdr
00
(II) PCI: 01:00:0: chip 1000,0058 card 1734,10fa rev 04 class 01,00,00 hdr
00
(II) PCI: 02:00:0: chip 111d,8018 card 0000,0000 rev 0e class 06,04,00 hdr
01
Please note that XFree86 and the Linux kernel show no warning or error
messages at
all, the only problem is the very long start time for XFree.
I tested a previous build of XFree86, including patches up to
4.7.99.5-4.7.99.6.diff.bz2.
This version doesn't show the problem. So I digged a little bit in the
patches released
after this one and I found that some modifications were done at the PCI
level. I finally
found that the problem is located in 4.7.99.14-4.7.99.15.diff.bz2, more
precisely in the
xc/programs/Xserver/hw/xfree86/os-support/bus/Pci.c file (which includes
the PCI detection
loop).
I suppressed the modifications on Pci.c from the
4.7.99.14-4.7.99.15.diff.bz2 patch, rebuilded
XFree86 and the problem doesn't occur now.
So it is related to the recent modifications on the PCI code.
But I don't know where the problem exactly occurs in this file. I don't
have the time to track
line by line and I had to give the computer to someone else for a couple
of weeks.
Hope this helps.
Loïc Mahé - Toulouse, France
00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev
01)
Subsystem: Fujitsu Siemens Computers: Unknown device 1101
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] #09 [910c]
00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI Express
Bridge (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: df900000-df9fffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [a0] #10 [0142]
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Capabilities: [50] #13 [0306]
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1840 [size=32]
Capabilities: [50] #13 [0306]
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Capabilities: [50] #13 [0306]
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [20a0]
Capabilities: [98] #13 [0306]
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: dfc00000-dfdfffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: dfe00000-dfefffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: df000000-df8fffff
Prefetchable memory behind bridge: 00000000de000000-00000000def00000
BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Capabilities: [50] #13 [0306]
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18a0 [size=32]
Capabilities: [50] #13 [0306]
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18c0 [size=32]
Capabilities: [50] #13 [0306]
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dff00400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [20a0]
Capabilities: [98] #13 [0306]
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller
(rev 02)
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] #09 [100c]
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port
SATA IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1c10 [size=16]
Region 5: I/O ports at 1c00 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] #13 [0306]
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dff00800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 18e0 [size=32]
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE
Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Fujitsu Siemens Computers: Unknown device 10e0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1c68 [size=8]
Region 1: I/O ports at 1c5c [size=4]
Region 2: I/O ports at 1c60 [size=8]
Region 3: I/O ports at 1c58 [size=4]
Region 4: I/O ports at 1c30 [size=16]
Region 5: I/O ports at 1c20 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] #13 [0306]
01:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express
Fusion-MPT SAS (rev 04)
Subsystem: Fujitsu Siemens Computers: Unknown device 10fa
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 2000 [disabled] [size=256]
Region 1: Memory at df910000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at df900000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=2M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] #10 [0001]
Capabilities: [98] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [b0] #11 [0000]
02:00.0 PCI bridge: Integrated Device Technology, Inc.: Unknown device 8018
(rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Bus: primary=02, secondary=03, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: dfc00000-dfdfffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [4051]
Capabilities: [c0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:02.0 PCI bridge: Integrated Device Technology, Inc.: Unknown device 8018
(rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Bus: primary=03, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dfc00000-dfcfffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [4061]
Capabilities: [c0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
03:04.0 PCI bridge: Integrated Device Technology, Inc.: Unknown device 8018
(rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Bus: primary=03, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: dfd00000-dfdfffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [4061]
Capabilities: [c0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
04:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
Subsystem: Intel Corporation PRO/1000 PT Quad Port LP Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Interrupt: pin B routed to IRQ 19
Region 0: Memory at dfc20000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dfc00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 3000 [size=32]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] #10 [0001]
04:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
Subsystem: Intel Corporation PRO/1000 PT Quad Port LP Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dfc60000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dfc40000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 3020 [size=32]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] #10 [0001]
05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
Subsystem: Intel Corporation PRO/1000 PT Quad Port LP Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dfd20000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dfd00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 4000 [size=32]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] #10 [0001]
05:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
Subsystem: Intel Corporation PRO/1000 PT Quad Port LP Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfd60000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dfd40000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 4020 [size=32]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] #10 [0001]
06:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755 Gigabit
Ethernet PCI Express (rev 02)
Subsystem: Fujitsu Siemens Computers: Unknown device 10b2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfe00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] #09 [0078]
Capabilities: [e8] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0028000000003380 Data: 2020
Capabilities: [d0] #10 [0001]
07:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot]
ServerEngines (SEP1) (rev 02) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Siemens Computers: Unknown device 108e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Interrupt: pin A routed to IRQ 17
Region 0: Memory at de000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at df800000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=8M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [e4] #10 [0011]
Capabilities: [54] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000