subject:"Re\: \[OMPI devel\] === CREATE FAILURE ==="

Re: [OMPI devel] === CREATE FAILURE (dev-1979-g13425e7) ===

2015-06-26 Thread Jeff Squyres (jsquyres)

No results were put back to the PR where we did the extensions work this 
afternoon.  See attached.

[cid:43E6B6DA-588A-4766-80B3-BD8762F683AD@cisco.com]



On Jun 25, 2015, at 9:03 PM, Howard Pritchard 
> wrote:

sorry, not true. look at the logs on IU.
runs at 3:07 and 4:08 IU time.


2015-06-25 21:46 GMT-06:00 Jeff Squyres (jsquyres) 
>:
Howard --

The LANL distcheck jenkins hasn't been running all day.


> On Jun 25, 2015, at 8:33 PM, Howard Pritchard  wrote:
>
> Hi folks,
>
> I'm confused about this build failure.  It should have been caught by the 
> make distcheck IU jenkins
> project I would think.  Should the IU jenkins project do something else beside
>
> make -j X distcheck
>
> to catch this problem?
>
> Or, did this problem happen because someone bypassed the PR process?
>
> We shouldn't have this kind of build failure anymore as long as people have 
> stopped  bypassing
> PR process.
>
> Howard
>
>
>
> 2015-06-25 19:22 GMT-06:00 MPI Team :
>
> ERROR: Command returned a non-zero exist status (dev-1979-g13425e7):
>make -j 8 distcheck
>
> Start time: Thu Jun 25 21:10:02 EDT 2015
> End time:   Thu Jun 25 21:22:24 EDT 2015
>
> ===
> [... previous lines snipped ...]
> test -z "test-suite.log" || rm -f test-suite.log
> rm -rf ./.deps
> rm -f Makefile
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/datatype'
> Making distclean in util
> make[3]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/util'
> test -z "*~ .#*" || rm -f *~ .#*
> rm -rf .libs _libs
> rm -f test_session_dir_out test-file opal_path_nfs.out
>  rm -f opal_bit_ops opal_path_nfs
> rm -f *.o
> test -z "opal_bit_ops.log opal_path_nfs.log" || rm -f opal_bit_ops.log 
> opal_path_nfs.log
> rm -f *.lo
> rm -f *.tab.c
> test -z "opal_bit_ops.trs opal_path_nfs.trs" || rm -f opal_bit_ops.trs 
> opal_path_nfs.trs
> test -z "" || rm -f
> test . = "../../../../test/util" || test -z "" || rm -f
> rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> test -z "test-suite.log" || rm -f test-suite.log
> rm -rf ./.deps
> rm -f Makefile
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/util'
> make[3]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> test -z "*~ .#*" || rm -f *~ .#*
> rm -rf .libs _libs
> rm -f *.lo
> test -z "" || rm -f
> test . = "../../../test" || test -z "" || rm -f
> rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> rm -f Makefile
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> make[2]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> test -z "*~ .#*" || rm -f *~ .#*
> rm -rf .libs _libs
> rm -f *.lo
> test -z "ompi/include/ompi/version.h orte/include/orte/version.h 
> oshmem/include/oshmem/version.h opal/include/opal/version.h 
> ompi/mpi/fortran/configure-fortran-output.h 
> contrib/dist/mofed/debian/changelog contrib/dist/mofed/debian/control 
> contrib/dist/mofed/debian/copyright contrib/dist/mofed/debian/rules 
> contrib/dist/mofed/compile_debian_mlnx_example" || rm -f 
> ompi/include/ompi/version.h orte/include/orte/version.h 
> oshmem/include/oshmem/version.h opal/include/opal/version.h 
> ompi/mpi/fortran/configure-fortran-output.h 
> contrib/dist/mofed/debian/changelog contrib/dist/mofed/debian/control 
> contrib/dist/mofed/debian/copyright contrib/dist/mofed/debian/rules 
> contrib/dist/mofed/compile_debian_mlnx_example
> rm -f opal/mca/hwloc/hwloc1110/hwloc/include/private/autogen/config.h 
> opal/mca/hwloc/hwloc1110/hwloc/include/private/autogen/stamp-h4 
> opal/mca/hwloc/hwloc1110/hwloc/include/hwloc/autogen/config.h 
> opal/mca/hwloc/hwloc1110/hwloc/include/hwloc/autogen/stamp-h5
> rm -f libtool config.lt
> rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> test . = "../.." || test -z "" || rm -f
> rm -f cscope.out cscope.in.out cscope.po.out cscope.files
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> rm -f config.status config.cache config.log configure.lineno 
> config.status.lineno
> rm -f Makefile
> ERROR: files left in build

Re: [OMPI devel] === CREATE FAILURE (dev-1979-g13425e7) ===

2015-06-26 Thread Howard Pritchard

sorry, not true. look at the logs on IU.
runs at 3:07 and 4:08 IU time.


2015-06-25 21:46 GMT-06:00 Jeff Squyres (jsquyres) :

> Howard --
>
> The LANL distcheck jenkins hasn't been running all day.
>
>
> > On Jun 25, 2015, at 8:33 PM, Howard Pritchard 
> wrote:
> >
> > Hi folks,
> >
> > I'm confused about this build failure.  It should have been caught by
> the make distcheck IU jenkins
> > project I would think.  Should the IU jenkins project do something else
> beside
> >
> > make -j X distcheck
> >
> > to catch this problem?
> >
> > Or, did this problem happen because someone bypassed the PR process?
> >
> > We shouldn't have this kind of build failure anymore as long as people
> have stopped  bypassing
> > PR process.
> >
> > Howard
> >
> >
> >
> > 2015-06-25 19:22 GMT-06:00 MPI Team :
> >
> > ERROR: Command returned a non-zero exist status (dev-1979-g13425e7):
> >make -j 8 distcheck
> >
> > Start time: Thu Jun 25 21:10:02 EDT 2015
> > End time:   Thu Jun 25 21:22:24 EDT 2015
> >
> > ===
> > [... previous lines snipped ...]
> > test -z "test-suite.log" || rm -f test-suite.log
> > rm -rf ./.deps
> > rm -f Makefile
> > make[3]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/datatype'
> > Making distclean in util
> > make[3]: Entering directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/util'
> > test -z "*~ .#*" || rm -f *~ .#*
> > rm -rf .libs _libs
> > rm -f test_session_dir_out test-file opal_path_nfs.out
> >  rm -f opal_bit_ops opal_path_nfs
> > rm -f *.o
> > test -z "opal_bit_ops.log opal_path_nfs.log" || rm -f opal_bit_ops.log
> opal_path_nfs.log
> > rm -f *.lo
> > rm -f *.tab.c
> > test -z "opal_bit_ops.trs opal_path_nfs.trs" || rm -f opal_bit_ops.trs
> opal_path_nfs.trs
> > test -z "" || rm -f
> > test . = "../../../../test/util" || test -z "" || rm -f
> > rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> > test -z "test-suite.log" || rm -f test-suite.log
> > rm -rf ./.deps
> > rm -f Makefile
> > make[3]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/util'
> > make[3]: Entering directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> > test -z "*~ .#*" || rm -f *~ .#*
> > rm -rf .libs _libs
> > rm -f *.lo
> > test -z "" || rm -f
> > test . = "../../../test" || test -z "" || rm -f
> > rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> > make[3]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> > rm -f Makefile
> > make[2]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> > make[2]: Entering directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> > test -z "*~ .#*" || rm -f *~ .#*
> > rm -rf .libs _libs
> > rm -f *.lo
> > test -z "ompi/include/ompi/version.h orte/include/orte/version.h
> oshmem/include/oshmem/version.h opal/include/opal/version.h
> ompi/mpi/fortran/configure-fortran-output.h
> contrib/dist/mofed/debian/changelog contrib/dist/mofed/debian/control
> contrib/dist/mofed/debian/copyright contrib/dist/mofed/debian/rules
> contrib/dist/mofed/compile_debian_mlnx_example" || rm -f
> ompi/include/ompi/version.h orte/include/orte/version.h
> oshmem/include/oshmem/version.h opal/include/opal/version.h
> ompi/mpi/fortran/configure-fortran-output.h
> contrib/dist/mofed/debian/changelog contrib/dist/mofed/debian/control
> contrib/dist/mofed/debian/copyright contrib/dist/mofed/debian/rules
> contrib/dist/mofed/compile_debian_mlnx_example
> > rm -f opal/mca/hwloc/hwloc1110/hwloc/include/private/autogen/config.h
> opal/mca/hwloc/hwloc1110/hwloc/include/private/autogen/stamp-h4
> opal/mca/hwloc/hwloc1110/hwloc/include/hwloc/autogen/config.h
> opal/mca/hwloc/hwloc1110/hwloc/include/hwloc/autogen/stamp-h5
> > rm -f libtool config.lt
> > rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> > test . = "../.." || test -z "" || rm -f
> > rm -f cscope.out cscope.in.out cscope.po.out cscope.files
> > make[2]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> > rm -f config.status config.cache config.log configure.lineno
> config.status.lineno
> > rm -f Makefile
> > ERROR: files left in build directory after distclean:
> > ./ompi/mpiext/affinity/c/OMPI_Affinity_str.3
> > make[1]: *** [distcleancheck] Error 1
> > make[1]: Leaving directory
>

Re: [OMPI devel] === CREATE FAILURE (dev-1979-g13425e7) ===

2015-06-26 Thread Ralph Castain

I have a fix - about to commit


On Thu, Jun 25, 2015 at 8:46 PM, Jeff Squyres (jsquyres)  wrote:

> Howard --
>
> The LANL distcheck jenkins hasn't been running all day.
>
>
> > On Jun 25, 2015, at 8:33 PM, Howard Pritchard 
> wrote:
> >
> > Hi folks,
> >
> > I'm confused about this build failure.  It should have been caught by
> the make distcheck IU jenkins
> > project I would think.  Should the IU jenkins project do something else
> beside
> >
> > make -j X distcheck
> >
> > to catch this problem?
> >
> > Or, did this problem happen because someone bypassed the PR process?
> >
> > We shouldn't have this kind of build failure anymore as long as people
> have stopped  bypassing
> > PR process.
> >
> > Howard
> >
> >
> >
> > 2015-06-25 19:22 GMT-06:00 MPI Team :
> >
> > ERROR: Command returned a non-zero exist status (dev-1979-g13425e7):
> >make -j 8 distcheck
> >
> > Start time: Thu Jun 25 21:10:02 EDT 2015
> > End time:   Thu Jun 25 21:22:24 EDT 2015
> >
> > ===
> > [... previous lines snipped ...]
> > test -z "test-suite.log" || rm -f test-suite.log
> > rm -rf ./.deps
> > rm -f Makefile
> > make[3]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/datatype'
> > Making distclean in util
> > make[3]: Entering directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/util'
> > test -z "*~ .#*" || rm -f *~ .#*
> > rm -rf .libs _libs
> > rm -f test_session_dir_out test-file opal_path_nfs.out
> >  rm -f opal_bit_ops opal_path_nfs
> > rm -f *.o
> > test -z "opal_bit_ops.log opal_path_nfs.log" || rm -f opal_bit_ops.log
> opal_path_nfs.log
> > rm -f *.lo
> > rm -f *.tab.c
> > test -z "opal_bit_ops.trs opal_path_nfs.trs" || rm -f opal_bit_ops.trs
> opal_path_nfs.trs
> > test -z "" || rm -f
> > test . = "../../../../test/util" || test -z "" || rm -f
> > rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> > test -z "test-suite.log" || rm -f test-suite.log
> > rm -rf ./.deps
> > rm -f Makefile
> > make[3]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/util'
> > make[3]: Entering directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> > test -z "*~ .#*" || rm -f *~ .#*
> > rm -rf .libs _libs
> > rm -f *.lo
> > test -z "" || rm -f
> > test . = "../../../test" || test -z "" || rm -f
> > rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> > make[3]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> > rm -f Makefile
> > make[2]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> > make[2]: Entering directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> > test -z "*~ .#*" || rm -f *~ .#*
> > rm -rf .libs _libs
> > rm -f *.lo
> > test -z "ompi/include/ompi/version.h orte/include/orte/version.h
> oshmem/include/oshmem/version.h opal/include/opal/version.h
> ompi/mpi/fortran/configure-fortran-output.h
> contrib/dist/mofed/debian/changelog contrib/dist/mofed/debian/control
> contrib/dist/mofed/debian/copyright contrib/dist/mofed/debian/rules
> contrib/dist/mofed/compile_debian_mlnx_example" || rm -f
> ompi/include/ompi/version.h orte/include/orte/version.h
> oshmem/include/oshmem/version.h opal/include/opal/version.h
> ompi/mpi/fortran/configure-fortran-output.h
> contrib/dist/mofed/debian/changelog contrib/dist/mofed/debian/control
> contrib/dist/mofed/debian/copyright contrib/dist/mofed/debian/rules
> contrib/dist/mofed/compile_debian_mlnx_example
> > rm -f opal/mca/hwloc/hwloc1110/hwloc/include/private/autogen/config.h
> opal/mca/hwloc/hwloc1110/hwloc/include/private/autogen/stamp-h4
> opal/mca/hwloc/hwloc1110/hwloc/include/hwloc/autogen/config.h
> opal/mca/hwloc/hwloc1110/hwloc/include/hwloc/autogen/stamp-h5
> > rm -f libtool config.lt
> > rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> > test . = "../.." || test -z "" || rm -f
> > rm -f cscope.out cscope.in.out cscope.po.out cscope.files
> > make[2]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> > rm -f config.status config.cache config.log configure.lineno
> config.status.lineno
> > rm -f Makefile
> > ERROR: files left in build directory after distclean:
> > ./ompi/mpiext/affinity/c/OMPI_Affinity_str.3
> > make[1]: *** [distcleancheck] Error 1
> > make[1]: Leaving directory
>

Re: [OMPI devel] === CREATE FAILURE (dev-1979-g13425e7) ===

2015-06-26 Thread Jeff Squyres (jsquyres)

Howard --

The LANL distcheck jenkins hasn't been running all day.


> On Jun 25, 2015, at 8:33 PM, Howard Pritchard  wrote:
> 
> Hi folks,
> 
> I'm confused about this build failure.  It should have been caught by the 
> make distcheck IU jenkins
> project I would think.  Should the IU jenkins project do something else beside
> 
> make -j X distcheck
> 
> to catch this problem?
> 
> Or, did this problem happen because someone bypassed the PR process?
> 
> We shouldn't have this kind of build failure anymore as long as people have 
> stopped  bypassing
> PR process.
> 
> Howard
> 
> 
> 
> 2015-06-25 19:22 GMT-06:00 MPI Team :
> 
> ERROR: Command returned a non-zero exist status (dev-1979-g13425e7):
>make -j 8 distcheck
> 
> Start time: Thu Jun 25 21:10:02 EDT 2015
> End time:   Thu Jun 25 21:22:24 EDT 2015
> 
> ===
> [... previous lines snipped ...]
> test -z "test-suite.log" || rm -f test-suite.log
> rm -rf ./.deps
> rm -f Makefile
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/datatype'
> Making distclean in util
> make[3]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/util'
> test -z "*~ .#*" || rm -f *~ .#*
> rm -rf .libs _libs
> rm -f test_session_dir_out test-file opal_path_nfs.out
>  rm -f opal_bit_ops opal_path_nfs
> rm -f *.o
> test -z "opal_bit_ops.log opal_path_nfs.log" || rm -f opal_bit_ops.log 
> opal_path_nfs.log
> rm -f *.lo
> rm -f *.tab.c
> test -z "opal_bit_ops.trs opal_path_nfs.trs" || rm -f opal_bit_ops.trs 
> opal_path_nfs.trs
> test -z "" || rm -f
> test . = "../../../../test/util" || test -z "" || rm -f
> rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> test -z "test-suite.log" || rm -f test-suite.log
> rm -rf ./.deps
> rm -f Makefile
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/util'
> make[3]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> test -z "*~ .#*" || rm -f *~ .#*
> rm -rf .libs _libs
> rm -f *.lo
> test -z "" || rm -f
> test . = "../../../test" || test -z "" || rm -f
> rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> rm -f Makefile
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> make[2]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> test -z "*~ .#*" || rm -f *~ .#*
> rm -rf .libs _libs
> rm -f *.lo
> test -z "ompi/include/ompi/version.h orte/include/orte/version.h 
> oshmem/include/oshmem/version.h opal/include/opal/version.h 
> ompi/mpi/fortran/configure-fortran-output.h 
> contrib/dist/mofed/debian/changelog contrib/dist/mofed/debian/control 
> contrib/dist/mofed/debian/copyright contrib/dist/mofed/debian/rules 
> contrib/dist/mofed/compile_debian_mlnx_example" || rm -f 
> ompi/include/ompi/version.h orte/include/orte/version.h 
> oshmem/include/oshmem/version.h opal/include/opal/version.h 
> ompi/mpi/fortran/configure-fortran-output.h 
> contrib/dist/mofed/debian/changelog contrib/dist/mofed/debian/control 
> contrib/dist/mofed/debian/copyright contrib/dist/mofed/debian/rules 
> contrib/dist/mofed/compile_debian_mlnx_example
> rm -f opal/mca/hwloc/hwloc1110/hwloc/include/private/autogen/config.h 
> opal/mca/hwloc/hwloc1110/hwloc/include/private/autogen/stamp-h4 
> opal/mca/hwloc/hwloc1110/hwloc/include/hwloc/autogen/config.h 
> opal/mca/hwloc/hwloc1110/hwloc/include/hwloc/autogen/stamp-h5
> rm -f libtool config.lt
> rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> test . = "../.." || test -z "" || rm -f
> rm -f cscope.out cscope.in.out cscope.po.out cscope.files
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> rm -f config.status config.cache config.log configure.lineno 
> config.status.lineno
> rm -f Makefile
> ERROR: files left in build directory after distclean:
> ./ompi/mpiext/affinity/c/OMPI_Affinity_str.3
> make[1]: *** [distcleancheck] Error 1
> make[1]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> make: *** [distcheck] Error 1
> ===
> 
> Your friendly daemon,
> Cyrador
>

Re: [OMPI devel] === CREATE FAILURE (dev-1979-g13425e7) ===

2015-06-26 Thread Howard Pritchard

Hi folks,

I'm confused about this build failure.  It should have been caught by the
make distcheck IU jenkins
project I would think.  Should the IU jenkins project do something else
beside

make -j X distcheck

to catch this problem?

Or, did this problem happen because someone bypassed the PR process?

We shouldn't have this kind of build failure anymore as long as people have
stopped  bypassing
PR process.

Howard



2015-06-25 19:22 GMT-06:00 MPI Team :

>
> ERROR: Command returned a non-zero exist status (dev-1979-g13425e7):
>make -j 8 distcheck
>
> Start time: Thu Jun 25 21:10:02 EDT 2015
> End time:   Thu Jun 25 21:22:24 EDT 2015
>
> ===
> [... previous lines snipped ...]
> test -z "test-suite.log" || rm -f test-suite.log
> rm -rf ./.deps
> rm -f Makefile
> make[3]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/datatype'
> Making distclean in util
> make[3]: Entering directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/util'
> test -z "*~ .#*" || rm -f *~ .#*
> rm -rf .libs _libs
> rm -f test_session_dir_out test-file opal_path_nfs.out
>  rm -f opal_bit_ops opal_path_nfs
> rm -f *.o
> test -z "opal_bit_ops.log opal_path_nfs.log" || rm -f opal_bit_ops.log
> opal_path_nfs.log
> rm -f *.lo
> rm -f *.tab.c
> test -z "opal_bit_ops.trs opal_path_nfs.trs" || rm -f opal_bit_ops.trs
> opal_path_nfs.trs
> test -z "" || rm -f
> test . = "../../../../test/util" || test -z "" || rm -f
> rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> test -z "test-suite.log" || rm -f test-suite.log
> rm -rf ./.deps
> rm -f Makefile
> make[3]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test/util'
> make[3]: Entering directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> test -z "*~ .#*" || rm -f *~ .#*
> rm -rf .libs _libs
> rm -f *.lo
> test -z "" || rm -f
> test . = "../../../test" || test -z "" || rm -f
> rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> make[3]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> rm -f Makefile
> make[2]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub/test'
> make[2]: Entering directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> test -z "*~ .#*" || rm -f *~ .#*
> rm -rf .libs _libs
> rm -f *.lo
> test -z "ompi/include/ompi/version.h orte/include/orte/version.h
> oshmem/include/oshmem/version.h opal/include/opal/version.h
> ompi/mpi/fortran/configure-fortran-output.h
> contrib/dist/mofed/debian/changelog contrib/dist/mofed/debian/control
> contrib/dist/mofed/debian/copyright contrib/dist/mofed/debian/rules
> contrib/dist/mofed/compile_debian_mlnx_example" || rm -f
> ompi/include/ompi/version.h orte/include/orte/version.h
> oshmem/include/oshmem/version.h opal/include/opal/version.h
> ompi/mpi/fortran/configure-fortran-output.h
> contrib/dist/mofed/debian/changelog contrib/dist/mofed/debian/control
> contrib/dist/mofed/debian/copyright contrib/dist/mofed/debian/rules
> contrib/dist/mofed/compile_debian_mlnx_example
> rm -f opal/mca/hwloc/hwloc1110/hwloc/include/private/autogen/config.h
> opal/mca/hwloc/hwloc1110/hwloc/include/private/autogen/stamp-h4
> opal/mca/hwloc/hwloc1110/hwloc/include/hwloc/autogen/config.h
> opal/mca/hwloc/hwloc1110/hwloc/include/hwloc/autogen/stamp-h5
> rm -f libtool config.lt
> rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
> test . = "../.." || test -z "" || rm -f
> rm -f cscope.out cscope.in.out cscope.po.out cscope.files
> make[2]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> rm -f config.status config.cache config.log configure.lineno
> config.status.lineno
> rm -f Makefile
> ERROR: files left in build directory after distclean:
> ./ompi/mpiext/affinity/c/OMPI_Affinity_str.3
> make[1]: *** [distcleancheck] Error 1
> make[1]: Leaving directory
> `/home/mpiteam/openmpi/nightly-tarball-build-root/master/ompi-2015-06-25-211002/ompi/openmpi-dev-1979-g13425e7/_build/sub'
> make: *** [distcheck] Error 1
> ===
>
> Your friendly daemon,
> Cyrador
> ___
> testing mailing list
> test...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/testing
>

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2014-07-28 Thread Ralph Castain

Fix is coming

On Jul 28, 2014, at 6:11 PM, MPI Team  wrote:

> 
> ERROR: Command returned a non-zero exist status (trunk):
>   make -j 8 distcheck
> 
> Start time: Mon Jul 28 21:05:01 EDT 2014
> End time:   Mon Jul 28 21:11:02 EDT 2014
> 
> ===
> [... previous lines snipped ...]
>  CC   class/opal_ring_buffer.lo
>  CC   class/opal_rb_tree.lo
>  CC   class/ompi_free_list.lo
>  CC   memoryhooks/memory.lo
>  CC   runtime/opal_progress.lo
>  CC   runtime/opal_finalize.lo
>  CC   runtime/opal_init.lo
>  CC   runtime/opal_params.lo
>  CC   runtime/opal_cr.lo
>  CC   runtime/opal_info_support.lo
>  CC   runtime/opal_progress_threads.lo
>  CC   threads/condition.lo
>  CC   threads/mutex.lo
>  CC   threads/thread.lo
>  CC   threads/tsd.lo
>  CC   dss/dss_internal_functions.lo
>  CC   dss/dss_compare.lo
>  CC   dss/dss_copy.lo
>  CC   dss/dss_dump.lo
>  CC   dss/dss_load_unload.lo
>  CC   dss/dss_lookup.lo
>  CC   dss/dss_pack.lo
>  CC   dss/dss_peek.lo
>  CC   dss/dss_print.lo
>  CC   dss/dss_register.lo
>  CC   dss/dss_unpack.lo
>  CC   dss/dss_open_close.lo
>  CCLD libopen-pal.la
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r32335/ompi/openmpi-1.9a1r32335/_build/opal'
> Making all in mca/common/sm
> make[3]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r32335/ompi/openmpi-1.9a1r32335/_build/opal/mca/common/sm'
>  CC   common_sm.lo
>  LN_S libmca_common_sm.la
> ../../../../../opal/mca/common/sm/common_sm.c:54:27: error: common_sm_rml.h: 
> No such file or directory
> ../../../../../opal/mca/common/sm/common_sm.c: In function 'attach_and_init':
> ../../../../../opal/mca/common/sm/common_sm.c:83: warning: implicit 
> declaration of function 'opal_shmem_segment_attach'
> ../../../../../opal/mca/common/sm/common_sm.c:83: warning: cast to pointer 
> from integer of different size
> ../../../../../opal/mca/common/sm/common_sm.c:90: warning: implicit 
> declaration of function 'opal_shmem_segment_detach'
> ../../../../../opal/mca/common/sm/common_sm.c:96: warning: implicit 
> declaration of function 'opal_shmem_ds_copy'
> ../../../../../opal/mca/common/sm/common_sm.c: In function 
> 'mca_common_sm_module_create_and_attach':
> ../../../../../opal/mca/common/sm/common_sm.c:172: warning: implicit 
> declaration of function 'opal_shmem_segment_create'
> ../../../../../opal/mca/common/sm/common_sm.c: In function 
> 'mca_common_sm_module_unlink':
> ../../../../../opal/mca/common/sm/common_sm.c:208: warning: implicit 
> declaration of function 'opal_shmem_unlink'
> make[3]: *** [common_sm.lo] Error 1
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r32335/ompi/openmpi-1.9a1r32335/_build/opal/mca/common/sm'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r32335/ompi/openmpi-1.9a1r32335/_build/opal'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r32335/ompi/openmpi-1.9a1r32335/_build'
> make: *** [distcheck] Error 1
> ===
> 
> Your friendly daemon,
> Cyrador
> ___
> testing mailing list
> test...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/testing

Re: [OMPI devel] === CREATE FAILURE (v1.7) ===

2013-07-02 Thread Jeff Squyres (jsquyres)

Here's the autotools we're using for v1.7:

-
module-whatis  "Load Autotools (ac 2.69, am 1.12.2, lt 2.4.2, and m4 1.4.16)"

eval set  [ array get env HOME ]
set AUTOTOOLS "/u/mpiteam/local/autotools-2.69-1.12.2-2.4.2-1.4.16"
setenv AUTOTOOLS $AUTOTOOLS
-



On Jul 2, 2013, at 11:14 AM, "Jeff Squyres (jsquyres)" 
 wrote:

> Here's the beginning of the error:
> 
>  CC   lt_interface.lo
> In file included from ../../../opal/util/lt_interface.c:21:
> ../../../opal/libltdl/ltdl.h:36:31: libltdl/lt_system.h: No such file or 
> directory
> ../../../opal/libltdl/ltdl.h:37:30: libltdl/lt_error.h: No such file or 
> directory
> ../../../opal/libltdl/ltdl.h:38:33: libltdl/lt_dlloader.h: No such file or 
> directory
> In file included from ../../../opal/util/lt_interface.c:21:
> ../../../opal/libltdl/ltdl.h:50: error: syntax error before "typedef"
> ../../../opal/libltdl/ltdl.h:53: error: syntax error before "int"
> ../../../opal/libltdl/ltdl.h:54: error: syntax error before "int"
> ../../../opal/libltdl/ltdl.h:57: error: syntax error before "int"
> 
> 
> 
> 
> On Jul 1, 2013, at 10:11 PM, MPI Team  wrote:
> 
>> 
>> ERROR: Command returned a non-zero exist status (v1.7):
>>  make distcheck
>> 
>> Start time: Mon Jul  1 21:53:47 EDT 2013
>> End time:   Mon Jul  1 22:11:52 EDT 2013
>> 
>> ===
>> [... previous lines snipped ...]
>> ../../../opal/libltdl/ltdl.h:79: error: syntax error before "lt_dlhandle"
>> ../../../opal/libltdl/ltdl.h:80: error: syntax error before "lt_dladvise"
>> ../../../opal/libltdl/ltdl.h:81: error: syntax error before "void"
>> ../../../opal/libltdl/ltdl.h:82: error: syntax error before "const"
>> ../../../opal/libltdl/ltdl.h:83: error: syntax error before "int"
>> ../../../opal/libltdl/ltdl.h:99: error: syntax error before "int"
>> ../../../opal/libltdl/ltdl.h:100: error: syntax error before "int"
>> ../../../opal/libltdl/ltdl.h:101: error: syntax error before "int"
>> ../../../opal/libltdl/ltdl.h:106: error: syntax error before "lt_dlsymlist"
>> ../../../opal/libltdl/ltdl.h:121: error: syntax error before 
>> "lt_dlinterface_id"
>> ../../../opal/libltdl/ltdl.h:123: error: syntax error before "void"
>> ../../../opal/libltdl/ltdl.h:124: error: syntax error before "void"
>> ../../../opal/libltdl/ltdl.h:126: error: syntax error before "void"
>> ../../../opal/libltdl/ltdl.h:143: error: syntax error before "const"
>> ../../../opal/libltdl/ltdl.h:145: error: syntax error before "lt_dlhandle"
>> ../../../opal/libltdl/ltdl.h:147: error: syntax error before "lt_dlhandle"
>> ../../../opal/libltdl/ltdl.h:149: error: syntax error before "int"
>> ../../../opal/libltdl/ltdl.h:156: error: syntax error before "int"
>> ../../../opal/libltdl/ltdl.h:157: error: syntax error before "int"
>> ../../../opal/util/lt_interface.c:31: error: syntax error before "struct"
>> ../../../opal/util/lt_interface.c:32: error: syntax error before 
>> "lt_dladvise"
>> ../../../opal/util/lt_interface.c:32: warning: no semicolon at end of struct 
>> or union
>> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_init':
>> ../../../opal/util/lt_interface.c:101: error: invalid application of 
>> `sizeof' to incomplete type `opal_lt_dladvise_st' 
>> ../../../opal/util/lt_interface.c:105: error: dereferencing pointer to 
>> incomplete type
>> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_destroy':
>> ../../../opal/util/lt_interface.c:113: error: dereferencing pointer to 
>> incomplete type
>> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_ext':
>> ../../../opal/util/lt_interface.c:124: error: dereferencing pointer to 
>> incomplete type
>> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_resident':
>> ../../../opal/util/lt_interface.c:133: error: dereferencing pointer to 
>> incomplete type
>> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_local':
>> ../../../opal/util/lt_interface.c:142: error: dereferencing pointer to 
>> incomplete type
>> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_global':
>> ../../../opal/util/lt_interface.c:151: error: dereferencing pointer to 
>> incomplete type
>> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_preload':
>> ../../../opal/util/lt_interface.c:160: error: dereferencing pointer to 
>> incomplete type
>> ../../../opal/util/lt_interface.c: In function `opal_lt_dlopenadvise':
>> ../../../opal/util/lt_interface.c:237: error: dereferencing pointer to 
>> incomplete type
>> ../../../opal/util/lt_interface.c: At top level:
>> ../../../opal/libltdl/ltdl.h:106: warning: array 
>> 'lt__PROGRAM__LTX_preloaded_symbols' assumed to have one element
>> make[4]: *** [lt_interface.lo] Error 1
>> make[4]: Leaving directory 
>> `/home/mpiteam/openmpi/nightly-tarball-build-root/v1.7/create-r28699/ompi/openmpi-1.7.3a1r28699/_build/opal/util'
>> make[3]: *** [all-recursive] Error

Re: [OMPI devel] === CREATE FAILURE (v1.7) ===

2013-07-02 Thread Jeff Squyres (jsquyres)

Here's the beginning of the error:

  CC   lt_interface.lo
In file included from ../../../opal/util/lt_interface.c:21:
../../../opal/libltdl/ltdl.h:36:31: libltdl/lt_system.h: No such file or 
directory
../../../opal/libltdl/ltdl.h:37:30: libltdl/lt_error.h: No such file or 
directory
../../../opal/libltdl/ltdl.h:38:33: libltdl/lt_dlloader.h: No such file or 
directory
In file included from ../../../opal/util/lt_interface.c:21:
../../../opal/libltdl/ltdl.h:50: error: syntax error before "typedef"
../../../opal/libltdl/ltdl.h:53: error: syntax error before "int"
../../../opal/libltdl/ltdl.h:54: error: syntax error before "int"
../../../opal/libltdl/ltdl.h:57: error: syntax error before "int"




On Jul 1, 2013, at 10:11 PM, MPI Team  wrote:

> 
> ERROR: Command returned a non-zero exist status (v1.7):
>   make distcheck
> 
> Start time: Mon Jul  1 21:53:47 EDT 2013
> End time:   Mon Jul  1 22:11:52 EDT 2013
> 
> ===
> [... previous lines snipped ...]
> ../../../opal/libltdl/ltdl.h:79: error: syntax error before "lt_dlhandle"
> ../../../opal/libltdl/ltdl.h:80: error: syntax error before "lt_dladvise"
> ../../../opal/libltdl/ltdl.h:81: error: syntax error before "void"
> ../../../opal/libltdl/ltdl.h:82: error: syntax error before "const"
> ../../../opal/libltdl/ltdl.h:83: error: syntax error before "int"
> ../../../opal/libltdl/ltdl.h:99: error: syntax error before "int"
> ../../../opal/libltdl/ltdl.h:100: error: syntax error before "int"
> ../../../opal/libltdl/ltdl.h:101: error: syntax error before "int"
> ../../../opal/libltdl/ltdl.h:106: error: syntax error before "lt_dlsymlist"
> ../../../opal/libltdl/ltdl.h:121: error: syntax error before 
> "lt_dlinterface_id"
> ../../../opal/libltdl/ltdl.h:123: error: syntax error before "void"
> ../../../opal/libltdl/ltdl.h:124: error: syntax error before "void"
> ../../../opal/libltdl/ltdl.h:126: error: syntax error before "void"
> ../../../opal/libltdl/ltdl.h:143: error: syntax error before "const"
> ../../../opal/libltdl/ltdl.h:145: error: syntax error before "lt_dlhandle"
> ../../../opal/libltdl/ltdl.h:147: error: syntax error before "lt_dlhandle"
> ../../../opal/libltdl/ltdl.h:149: error: syntax error before "int"
> ../../../opal/libltdl/ltdl.h:156: error: syntax error before "int"
> ../../../opal/libltdl/ltdl.h:157: error: syntax error before "int"
> ../../../opal/util/lt_interface.c:31: error: syntax error before "struct"
> ../../../opal/util/lt_interface.c:32: error: syntax error before "lt_dladvise"
> ../../../opal/util/lt_interface.c:32: warning: no semicolon at end of struct 
> or union
> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_init':
> ../../../opal/util/lt_interface.c:101: error: invalid application of `sizeof' 
> to incomplete type `opal_lt_dladvise_st' 
> ../../../opal/util/lt_interface.c:105: error: dereferencing pointer to 
> incomplete type
> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_destroy':
> ../../../opal/util/lt_interface.c:113: error: dereferencing pointer to 
> incomplete type
> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_ext':
> ../../../opal/util/lt_interface.c:124: error: dereferencing pointer to 
> incomplete type
> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_resident':
> ../../../opal/util/lt_interface.c:133: error: dereferencing pointer to 
> incomplete type
> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_local':
> ../../../opal/util/lt_interface.c:142: error: dereferencing pointer to 
> incomplete type
> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_global':
> ../../../opal/util/lt_interface.c:151: error: dereferencing pointer to 
> incomplete type
> ../../../opal/util/lt_interface.c: In function `opal_lt_dladvise_preload':
> ../../../opal/util/lt_interface.c:160: error: dereferencing pointer to 
> incomplete type
> ../../../opal/util/lt_interface.c: In function `opal_lt_dlopenadvise':
> ../../../opal/util/lt_interface.c:237: error: dereferencing pointer to 
> incomplete type
> ../../../opal/util/lt_interface.c: At top level:
> ../../../opal/libltdl/ltdl.h:106: warning: array 
> 'lt__PROGRAM__LTX_preloaded_symbols' assumed to have one element
> make[4]: *** [lt_interface.lo] Error 1
> make[4]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/v1.7/create-r28699/ompi/openmpi-1.7.3a1r28699/_build/opal/util'
> make[3]: *** [all-recursive] Error 1
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/v1.7/create-r28699/ompi/openmpi-1.7.3a1r28699/_build/opal/util'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/v1.7/create-r28699/ompi/openmpi-1.7.3a1r28699/_build/opal'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory 
>

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2012-08-01 Thread Jeff Squyres

r26918 was the previous nightly tarball -- the create failure was in making the 
current nightly tarball.  So it's something that happened during the day 
yesterday that caused the failure (e.g., some header file was forgotten to be 
added to a Makefile.am).

I think Ralph fixed it in r26934.  I'll spin up a new tarball now, just to 
verify...


On Aug 1, 2012, at 12:43 AM, Paul Hargrove wrote:

> I've just built from openmpi-1.9a1r26918.tar.bz2 on a Linux/x86-64 machine 
> w/o any problems.
> So, that would seem to discount something missing from the tarball.
> 
> -Paul
> 
> On Tue, Jul 31, 2012 at 9:07 PM, Ralph Castain  wrote:
> Agreed - but I checked and didn't see anything missing.  will take 
> another look...
> 
> On Jul 31, 2012, at 9:04 PM, Paul Hargrove  wrote:
> 
>> The most likely reason for a "distcheck" to fail in this manner when a 
>> checkout is fine would be a header not getting included in the tarball due 
>> to some omission from Makefile.am
>> 
>> -Paul
>> 
>> On Tue, Jul 31, 2012 at 9:00 PM, Ralph Castain  wrote:
>> I'm not sure what to make of this one. I checked the code out and built it 
>> just fine on a linux box, including watching this file build. For whatever 
>> reason, the tarball maker just didn't find some include file?
>> 
>> 
>> On Jul 31, 2012, at 6:33 PM, MPI Team  wrote:
>> 
>> >
>> > ERROR: Command returned a non-zero exist status (trunk):
>> >   make distcheck
>> >
>> > Start time: Tue Jul 31 21:00:01 EDT 2012
>> > End time:   Tue Jul 31 21:33:05 EDT 2012
>> >
>> > ===
>> > [... previous lines snipped ...]
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:453: error: `buf' 
>> > undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:454: error: `max_data' 
>> > undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:455: error: `iov' 
>> > undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:456: error: `iovec_count' 
>> > undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:466: error: syntax error 
>> > before "ompi_file_t"
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function 
>> > `mca_io_ompio_datatype_is_contiguous':
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:468: error: 
>> > `mca_io_ompio_data_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:468: error: `data' 
>> > undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:469: error: 
>> > `mca_io_ompio_file_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:469: error: `fh' 
>> > undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:471: error: syntax error 
>> > before ')' token
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:474: error: `datatype' 
>> > undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:475: error: 
>> > `OMPIO_CONTIGUOUS_MEMORY' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:483: error: syntax error 
>> > before '*' token
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function 
>> > `mca_io_ompio_set_aggregator_props':
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:488: error: 
>> > `mca_io_ompio_data_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:488: error: `data' 
>> > undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:489: error: 
>> > `mca_io_ompio_file_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:489: error: `fh' 
>> > undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:491: error: syntax error 
>> > before ')' token
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:494: error: 
>> > `num_aggregators' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:495: error: 
>> > `bytes_per_proc' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:504: error: syntax error 
>> > before '*' token
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function 
>> > `mca_io_ompio_generate_current_file_view':
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:510: error: 
>> > `mca_io_ompio_data_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:510: error: `data' 
>> > undeclared (first

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2012-08-01 Thread Paul Hargrove

I've just built from openmpi-1.9a1r26918.tar.bz2 on a Linux/x86-64 machine
w/o any problems.
So, that would seem to discount something missing from the tarball.

-Paul

On Tue, Jul 31, 2012 at 9:07 PM, Ralph Castain  wrote:

> Agreed - but I checked and didn't see anything missing.  will take
> another look...
>
> On Jul 31, 2012, at 9:04 PM, Paul Hargrove  wrote:
>
> The most likely reason for a "distcheck" to fail in this manner when a
> checkout is fine would be a header not getting included in the tarball due
> to some omission from Makefile.am
>
> -Paul
>
> On Tue, Jul 31, 2012 at 9:00 PM, Ralph Castain  wrote:
>
>> I'm not sure what to make of this one. I checked the code out and built
>> it just fine on a linux box, including watching this file build. For
>> whatever reason, the tarball maker just didn't find some include file?
>>
>>
>> On Jul 31, 2012, at 6:33 PM, MPI Team  wrote:
>>
>> >
>> > ERROR: Command returned a non-zero exist status (trunk):
>> >   make distcheck
>> >
>> > Start time: Tue Jul 31 21:00:01 EDT 2012
>> > End time:   Tue Jul 31 21:33:05 EDT 2012
>> >
>> > ===
>> > [... previous lines snipped ...]
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:453: error: `buf'
>> undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:454: error: `max_data'
>> undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:455: error: `iov'
>> undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:456: error:
>> `iovec_count' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:466: error: syntax
>> error before "ompi_file_t"
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function
>> `mca_io_ompio_datatype_is_contiguous':
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:468: error:
>> `mca_io_ompio_data_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:468: error: `data'
>> undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:469: error:
>> `mca_io_ompio_file_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:469: error: `fh'
>> undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:471: error: syntax
>> error before ')' token
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:474: error: `datatype'
>> undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:475: error:
>> `OMPIO_CONTIGUOUS_MEMORY' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:483: error: syntax
>> error before '*' token
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function
>> `mca_io_ompio_set_aggregator_props':
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:488: error:
>> `mca_io_ompio_data_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:488: error: `data'
>> undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:489: error:
>> `mca_io_ompio_file_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:489: error: `fh'
>> undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:491: error: syntax
>> error before ')' token
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:494: error:
>> `num_aggregators' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:495: error:
>> `bytes_per_proc' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:504: error: syntax
>> error before '*' token
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function
>> `mca_io_ompio_generate_current_file_view':
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:510: error:
>> `mca_io_ompio_data_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:510: error: `data'
>> undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:511: error:
>> `mca_io_ompio_file_t' undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:511: error: `fh'
>> undeclared (first use in this function)
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:513: error: syntax
>> error before ')' token
>> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:516: error: `max_data'
>> undeclared (first use in this function)
>> >

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2012-08-01 Thread Ralph Castain

Agreed - but I checked and didn't see anything missing.  will take 
another look...

On Jul 31, 2012, at 9:04 PM, Paul Hargrove  wrote:

> The most likely reason for a "distcheck" to fail in this manner when a 
> checkout is fine would be a header not getting included in the tarball due to 
> some omission from Makefile.am
> 
> -Paul
> 
> On Tue, Jul 31, 2012 at 9:00 PM, Ralph Castain  wrote:
> I'm not sure what to make of this one. I checked the code out and built it 
> just fine on a linux box, including watching this file build. For whatever 
> reason, the tarball maker just didn't find some include file?
> 
> 
> On Jul 31, 2012, at 6:33 PM, MPI Team  wrote:
> 
> >
> > ERROR: Command returned a non-zero exist status (trunk):
> >   make distcheck
> >
> > Start time: Tue Jul 31 21:00:01 EDT 2012
> > End time:   Tue Jul 31 21:33:05 EDT 2012
> >
> > ===
> > [... previous lines snipped ...]
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:453: error: `buf' 
> > undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:454: error: `max_data' 
> > undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:455: error: `iov' 
> > undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:456: error: `iovec_count' 
> > undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:466: error: syntax error 
> > before "ompi_file_t"
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function 
> > `mca_io_ompio_datatype_is_contiguous':
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:468: error: 
> > `mca_io_ompio_data_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:468: error: `data' 
> > undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:469: error: 
> > `mca_io_ompio_file_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:469: error: `fh' undeclared 
> > (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:471: error: syntax error 
> > before ')' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:474: error: `datatype' 
> > undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:475: error: 
> > `OMPIO_CONTIGUOUS_MEMORY' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:483: error: syntax error 
> > before '*' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function 
> > `mca_io_ompio_set_aggregator_props':
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:488: error: 
> > `mca_io_ompio_data_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:488: error: `data' 
> > undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:489: error: 
> > `mca_io_ompio_file_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:489: error: `fh' undeclared 
> > (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:491: error: syntax error 
> > before ')' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:494: error: 
> > `num_aggregators' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:495: error: 
> > `bytes_per_proc' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:504: error: syntax error 
> > before '*' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function 
> > `mca_io_ompio_generate_current_file_view':
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:510: error: 
> > `mca_io_ompio_data_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:510: error: `data' 
> > undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:511: error: 
> > `mca_io_ompio_file_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:511: error: `fh' undeclared 
> > (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:513: error: syntax error 
> > before ')' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:516: error: `max_data' 
> > undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:517: error: `f_iov' 
> > undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:518: error: `iov_count' 
> > undeclared (first use in this function)
> >

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2012-08-01 Thread Paul Hargrove

The most likely reason for a "distcheck" to fail in this manner when a
checkout is fine would be a header not getting included in the tarball due
to some omission from Makefile.am

-Paul

On Tue, Jul 31, 2012 at 9:00 PM, Ralph Castain  wrote:

> I'm not sure what to make of this one. I checked the code out and built it
> just fine on a linux box, including watching this file build. For whatever
> reason, the tarball maker just didn't find some include file?
>
>
> On Jul 31, 2012, at 6:33 PM, MPI Team  wrote:
>
> >
> > ERROR: Command returned a non-zero exist status (trunk):
> >   make distcheck
> >
> > Start time: Tue Jul 31 21:00:01 EDT 2012
> > End time:   Tue Jul 31 21:33:05 EDT 2012
> >
> > ===
> > [... previous lines snipped ...]
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:453: error: `buf'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:454: error: `max_data'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:455: error: `iov'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:456: error:
> `iovec_count' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:466: error: syntax error
> before "ompi_file_t"
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function
> `mca_io_ompio_datatype_is_contiguous':
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:468: error:
> `mca_io_ompio_data_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:468: error: `data'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:469: error:
> `mca_io_ompio_file_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:469: error: `fh'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:471: error: syntax error
> before ')' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:474: error: `datatype'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:475: error:
> `OMPIO_CONTIGUOUS_MEMORY' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:483: error: syntax error
> before '*' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function
> `mca_io_ompio_set_aggregator_props':
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:488: error:
> `mca_io_ompio_data_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:488: error: `data'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:489: error:
> `mca_io_ompio_file_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:489: error: `fh'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:491: error: syntax error
> before ')' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:494: error:
> `num_aggregators' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:495: error:
> `bytes_per_proc' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:504: error: syntax error
> before '*' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function
> `mca_io_ompio_generate_current_file_view':
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:510: error:
> `mca_io_ompio_data_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:510: error: `data'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:511: error:
> `mca_io_ompio_file_t' undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:511: error: `fh'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:513: error: syntax error
> before ')' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:516: error: `max_data'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:517: error: `f_iov'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:518: error: `iov_count'
> undeclared (first use in this function)
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:527: error: syntax error
> before '*' token
> > ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function
> `mca_io_ompio_free_f_io_array':
> >

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2012-08-01 Thread Ralph Castain

I'm not sure what to make of this one. I checked the code out and built it just 
fine on a linux box, including watching this file build. For whatever reason, 
the tarball maker just didn't find some include file?


On Jul 31, 2012, at 6:33 PM, MPI Team  wrote:

> 
> ERROR: Command returned a non-zero exist status (trunk):
>   make distcheck
> 
> Start time: Tue Jul 31 21:00:01 EDT 2012
> End time:   Tue Jul 31 21:33:05 EDT 2012
> 
> ===
> [... previous lines snipped ...]
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:453: error: `buf' undeclared 
> (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:454: error: `max_data' 
> undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:455: error: `iov' undeclared 
> (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:456: error: `iovec_count' 
> undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:466: error: syntax error 
> before "ompi_file_t"
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function 
> `mca_io_ompio_datatype_is_contiguous':
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:468: error: 
> `mca_io_ompio_data_t' undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:468: error: `data' undeclared 
> (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:469: error: 
> `mca_io_ompio_file_t' undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:469: error: `fh' undeclared 
> (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:471: error: syntax error 
> before ')' token
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:474: error: `datatype' 
> undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:475: error: 
> `OMPIO_CONTIGUOUS_MEMORY' undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:483: error: syntax error 
> before '*' token
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function 
> `mca_io_ompio_set_aggregator_props':
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:488: error: 
> `mca_io_ompio_data_t' undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:488: error: `data' undeclared 
> (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:489: error: 
> `mca_io_ompio_file_t' undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:489: error: `fh' undeclared 
> (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:491: error: syntax error 
> before ')' token
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:494: error: `num_aggregators' 
> undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:495: error: `bytes_per_proc' 
> undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:504: error: syntax error 
> before '*' token
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function 
> `mca_io_ompio_generate_current_file_view':
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:510: error: 
> `mca_io_ompio_data_t' undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:510: error: `data' undeclared 
> (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:511: error: 
> `mca_io_ompio_file_t' undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:511: error: `fh' undeclared 
> (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:513: error: syntax error 
> before ')' token
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:516: error: `max_data' 
> undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:517: error: `f_iov' 
> undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:518: error: `iov_count' 
> undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: At top level:
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:527: error: syntax error 
> before '*' token
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c: In function 
> `mca_io_ompio_free_f_io_array':
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:529: error: 
> `mca_io_ompio_data_t' undeclared (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:529: error: `data' undeclared 
> (first use in this function)
> ../../../../../ompi/mca/io/ompio/io_ompio_nbc.c:530: error: 
> `mca_io_ompio_file_t' undeclared (first use in this

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2010-11-03 Thread Jeff Squyres

I confirm -- I was able to run "make distcheck" successfully on my systems.  I 
will kick off the nightly script right now to see if it works in the official 
build environment.


On Nov 3, 2010, at 12:12 PM, Shiqing Fan wrote:

> 
> Really sorry for the trouble. I forgot that opal_config.h has been included 
> only for Windows for the bool definition. 
> 
> It's already been reverted early today in the trunk.
> 
> 
> On 2010-11-3 4:11 PM, Barrett, Brian W wrote:
>> I'm pretty sure it was Shiqing's patch.  THe problem is that OPAL_DECLSPEC 
>> was added to event.h to export a couple of symbols, but none of the libevent 
>> files include opal_config.h, so OPAL_DECLSPEC isn't properly defined on Unix 
>> systems.  I ran into this last night and was going to send an e-mail this 
>> morning, but it looks like the nightly build beat me to it.  Unfortunately, 
>> I don't have time to fix the bug.
>> 
>> Brian
>> 
>> On Nov 3, 2010, at 7:20 AM, Ralph Castain wrote:
>> 
>>> Hmmm...but it -did- work after your last change - we got a nice tarball 
>>> that night. Perhaps it was Shiqing's commit that broke it?
>>> 
>>> 
>>> On Wed, Nov 3, 2010 at 4:36 AM, Jeff Squyres (jsquyres) 
>>>  wrote:
>>> Yep - I get these mails, too. 
>>> 
>>> My only comment is: %}%%€<>~|%>€€!!!
>>> 
>>> I swear I actually do test these things and they *do* work before I commit 
>>> them. There must be some difference between my env and the nightly creation 
>>> env. I'll investigate...
>>> 
>>> Sent from my PDA. No type good. 
>>> 
>>> On Nov 3, 2010, at 2:12 AM, "Mike Dubman"  wrote:
>>> 
 
 Hi,
 ompi/trunk (r23985) build still fails with compilation errors (attached).
 
 Regards
 M
 
 On Mon, Nov 1, 2010 at 11:10 PM, Jeff Squyres  wrote:
 Sorry for the delay on this -- the issue was quite subtle and the holiday 
 weekend got in the way.
 
 I have a fix that will be committed a little after 6pm US Eastern.  It 
 seems to allow a fresh SVN checkout (with my patch applied) to pass "make 
 distcheck".  Hopefully we'll finally get a new trunk tarball tonight.
 
 
 On Oct 31, 2010, at 9:16 PM, MPI Team wrote:
 
 >
 > ERROR: Command returned a non-zero exist status (trunk):
 >   make distcheck
 >
 > Start time: Sun Oct 31 21:00:12 EDT 2010
 > End time:   Sun Oct 31 21:16:33 EDT 2010
 >
 > ===
 > [... previous lines snipped ...]
 > checking for OPAL CXXFLAGS... -pthread
 > checking for OPAL CXXFLAGS_PREFIX...
 > checking for OPAL LDFLAGS...
 > checking for OPAL LIBS... -ldl   -Wl,--export-dynamic -lrt -lnsl -lutil 
 > -lm -ldl
 > checking for OPAL extra include dirs...
 > checking for ORTE CPPFLAGS...
 > checking for ORTE CXXFLAGS... -pthread
 > checking for ORTE CXXFLAGS_PREFIX...
 > checking for ORTE CFLAGS... -pthread
 > checking for ORTE CFLAGS_PREFIX...
 > checking for ORTE LDFLAGS...
 > checking for ORTE LIBS...  -ldl   -Wl,--export-dynamic -lrt -lnsl -lutil 
 > -lm -ldl
 > checking for ORTE extra include dirs...
 > checking for OMPI CPPFLAGS...
 > checking for OMPI CFLAGS... -pthread
 > checking for OMPI CFLAGS_PREFIX...
 > checking for OMPI CXXFLAGS... -pthread
 > checking for OMPI CXXFLAGS_PREFIX...
 > checking for OMPI FFLAGS... -pthread
 > checking for OMPI FFLAGS_PREFIX...
 > checking for OMPI FCFLAGS... -pthread
 > checking for OMPI FCFLAGS_PREFIX...
 > checking for OMPI LDFLAGS...
 > checking for OMPI LIBS...   -ldl   -Wl,--export-dynamic -lrt -lnsl 
 > -lutil -lm -ldl
 > checking for OMPI extra include dirs...
 >
 > *** Final output
 > configure: creating ./config.status
 > config.status: creating ompi/include/ompi/version.h
 > config.status: creating orte/include/orte/version.h
 > config.status: creating opal/include/opal/version.h
 > config.status: creating opal/mca/backtrace/Makefile
 > config.status: creating opal/mca/backtrace/printstack/Makefile
 > config.status: creating opal/mca/backtrace/execinfo/Makefile
 > config.status: creating opal/mca/backtrace/darwin/Makefile
 > config.status: creating opal/mca/backtrace/none/Makefile
 > config.status: creating opal/mca/carto/Makefile
 > config.status: creating opal/mca/carto/auto_detect/Makefile
 > config.status: creating opal/mca/carto/file/Makefile
 > config.status: creating opal/mca/compress/Makefile
 > config.status: creating opal/mca/compress/gzip/Makefile
 > config.status: creating opal/mca/compress/bzip/Makefile
 > config.status: creating opal/mca/crs/Makefile
 > config.status: creating opal/mca/crs/none/Makefile
 > config.status: creating opal/mca/crs/self/Makefile
 > config.status: creating opal/mca/crs/blcr/Makefile
 > config.status:

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2010-11-03 Thread Shiqing Fan

Really sorry for the trouble. I forgot that opal_config.h has been 
included only for Windows for the bool definition.

It's already been reverted early today in the trunk.

On 2010-11-3 4:11 PM, Barrett, Brian W wrote:
I'm pretty sure it was Shiqing's patch.  THe problem is that 
OPAL_DECLSPEC was added to event.h to export a couple of symbols, but 
none of the libevent files include opal_config.h, so OPAL_DECLSPEC 
isn't properly defined on Unix systems.  I ran into this last night 
and was going to send an e-mail this morning, but it looks like the 
nightly build beat me to it.  Unfortunately, I don't have time to fix 
the bug.

Brian

On Nov 3, 2010, at 7:20 AM, Ralph Castain wrote:

Hmmm...but it -did- work after your last change - we got a nice 
tarball that night. Perhaps it was Shiqing's commit that broke it?

On Wed, Nov 3, 2010 at 4:36 AM, Jeff Squyres (jsquyres) 
> wrote:

Yep - I get these mails, too.

My only comment is: %}%%€<>~|%>€€!!!

I swear I actually do test these things and they *do* work before
I commit them. There must be some difference between my env and
the nightly creation env. I'll investigate...

Sent from my PDA. No type good.

On Nov 3, 2010, at 2:12 AM, "Mike Dubman" > wrote:

Hi,
ompi/trunk (r23985) build still fails with compilation errors
(attached).

Regards
M

On Mon, Nov 1, 2010 at 11:10 PM, Jeff Squyres
> wrote:

Sorry for the delay on this -- the issue was quite subtle
and the holiday weekend got in the way.

I have a fix that will be committed a little after 6pm US
Eastern.  It seems to allow a fresh SVN checkout (with my
patch applied) to pass "make distcheck".  Hopefully we'll
finally get a new trunk tarball tonight.

On Oct 31, 2010, at 9:16 PM, MPI Team wrote:

>
> ERROR: Command returned a non-zero exist status (trunk):
>   make distcheck
>
> Start time: Sun Oct 31 21:00:12 EDT 2010
> End time:   Sun Oct 31 21:16:33 EDT 2010
>
>
===
> [... previous lines snipped ...]
> checking for OPAL CXXFLAGS... -pthread
> checking for OPAL CXXFLAGS_PREFIX...
> checking for OPAL LDFLAGS...
> checking for OPAL LIBS... -ldl   -Wl,--export-dynamic -lrt
-lnsl -lutil -lm -ldl
> checking for OPAL extra include dirs...
> checking for ORTE CPPFLAGS...
> checking for ORTE CXXFLAGS... -pthread
> checking for ORTE CXXFLAGS_PREFIX...
> checking for ORTE CFLAGS... -pthread
> checking for ORTE CFLAGS_PREFIX...
> checking for ORTE LDFLAGS...
> checking for ORTE LIBS...  -ldl   -Wl,--export-dynamic
-lrt -lnsl -lutil -lm -ldl
> checking for ORTE extra include dirs...
> checking for OMPI CPPFLAGS...
> checking for OMPI CFLAGS... -pthread
> checking for OMPI CFLAGS_PREFIX...
> checking for OMPI CXXFLAGS... -pthread
> checking for OMPI CXXFLAGS_PREFIX...
> checking for OMPI FFLAGS... -pthread
> checking for OMPI FFLAGS_PREFIX...
> checking for OMPI FCFLAGS... -pthread
> checking for OMPI FCFLAGS_PREFIX...
> checking for OMPI LDFLAGS...
> checking for OMPI LIBS...   -ldl   -Wl,--export-dynamic
-lrt -lnsl -lutil -lm -ldl
> checking for OMPI extra include dirs...
>
> *** Final output
> configure: creating ./config.status
> config.status: creating ompi/include/ompi/version.h
> config.status: creating orte/include/orte/version.h
> config.status: creating opal/include/opal/version.h
> config.status: creating opal/mca/backtrace/Makefile
> config.status: creating opal/mca/backtrace/printstack/Makefile
> config.status: creating opal/mca/backtrace/execinfo/Makefile
> config.status: creating opal/mca/backtrace/darwin/Makefile
> config.status: creating opal/mca/backtrace/none/Makefile
> config.status: creating opal/mca/carto/Makefile
> config.status: creating opal/mca/carto/auto_detect/Makefile
> config.status: creating opal/mca/carto/file/Makefile
> config.status: creating opal/mca/compress/Makefile
> config.status: creating opal/mca/compress/gzip/Makefile
> config.status: creating opal/mca/compress/bzip/Makefile
> config.status: creating opal/mca/crs/Makefile
> config.status: creating opal/mca/crs/none/Makefile
> config.status: creating opal/mca/crs/self/Makefile
> config.status: creating opal/mca/crs/blcr/Makefile
> config.status: creating opal/mca/event/Makefile
> config.status: creating

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2010-11-03 Thread Ralph Castain

Hmmm...but it -did- work after your last change - we got a nice tarball that
night. Perhaps it was Shiqing's commit that broke it?


On Wed, Nov 3, 2010 at 4:36 AM, Jeff Squyres (jsquyres)
wrote:

> Yep - I get these mails, too.
>
> My only comment is: %}%%€<>~|%>€€!!!
>
> I swear I actually do test these things and they *do* work before I commit
> them. There must be some difference between my env and the nightly creation
> env. I'll investigate...
>
> Sent from my PDA. No type good.
>
> On Nov 3, 2010, at 2:12 AM, "Mike Dubman"  wrote:
>
>
> Hi,
> ompi/trunk (r23985) build still fails with compilation errors (attached).
>
> Regards
> M
>
> On Mon, Nov 1, 2010 at 11:10 PM, Jeff Squyres < 
> jsquy...@cisco.com> wrote:
>
>> Sorry for the delay on this -- the issue was quite subtle and the holiday
>> weekend got in the way.
>>
>> I have a fix that will be committed a little after 6pm US Eastern.  It
>> seems to allow a fresh SVN checkout (with my patch applied) to pass "make
>> distcheck".  Hopefully we'll finally get a new trunk tarball tonight.
>>
>>
>> On Oct 31, 2010, at 9:16 PM, MPI Team wrote:
>>
>> >
>> > ERROR: Command returned a non-zero exist status (trunk):
>> >   make distcheck
>> >
>> > Start time: Sun Oct 31 21:00:12 EDT 2010
>> > End time:   Sun Oct 31 21:16:33 EDT 2010
>> >
>> > ===
>> > [... previous lines snipped ...]
>> > checking for OPAL CXXFLAGS... -pthread
>> > checking for OPAL CXXFLAGS_PREFIX...
>> > checking for OPAL LDFLAGS...
>> > checking for OPAL LIBS... -ldl   -Wl,--export-dynamic -lrt -lnsl -lutil
>> -lm -ldl
>> > checking for OPAL extra include dirs...
>> > checking for ORTE CPPFLAGS...
>> > checking for ORTE CXXFLAGS... -pthread
>> > checking for ORTE CXXFLAGS_PREFIX...
>> > checking for ORTE CFLAGS... -pthread
>> > checking for ORTE CFLAGS_PREFIX...
>> > checking for ORTE LDFLAGS...
>> > checking for ORTE LIBS...  -ldl   -Wl,--export-dynamic -lrt -lnsl -lutil
>> -lm -ldl
>> > checking for ORTE extra include dirs...
>> > checking for OMPI CPPFLAGS...
>> > checking for OMPI CFLAGS... -pthread
>> > checking for OMPI CFLAGS_PREFIX...
>> > checking for OMPI CXXFLAGS... -pthread
>> > checking for OMPI CXXFLAGS_PREFIX...
>> > checking for OMPI FFLAGS... -pthread
>> > checking for OMPI FFLAGS_PREFIX...
>> > checking for OMPI FCFLAGS... -pthread
>> > checking for OMPI FCFLAGS_PREFIX...
>> > checking for OMPI LDFLAGS...
>> > checking for OMPI LIBS...   -ldl   -Wl,--export-dynamic -lrt -lnsl
>> -lutil -lm -ldl
>> > checking for OMPI extra include dirs...
>> >
>> > *** Final output
>> > configure: creating ./config.status
>> > config.status: creating ompi/include/ompi/version.h
>> > config.status: creating orte/include/orte/version.h
>> > config.status: creating opal/include/opal/version.h
>> > config.status: creating opal/mca/backtrace/Makefile
>> > config.status: creating opal/mca/backtrace/printstack/Makefile
>> > config.status: creating opal/mca/backtrace/execinfo/Makefile
>> > config.status: creating opal/mca/backtrace/darwin/Makefile
>> > config.status: creating opal/mca/backtrace/none/Makefile
>> > config.status: creating opal/mca/carto/Makefile
>> > config.status: creating opal/mca/carto/auto_detect/Makefile
>> > config.status: creating opal/mca/carto/file/Makefile
>> > config.status: creating opal/mca/compress/Makefile
>> > config.status: creating opal/mca/compress/gzip/Makefile
>> > config.status: creating opal/mca/compress/bzip/Makefile
>> > config.status: creating opal/mca/crs/Makefile
>> > config.status: creating opal/mca/crs/none/Makefile
>> > config.status: creating opal/mca/crs/self/Makefile
>> > config.status: creating opal/mca/crs/blcr/Makefile
>> > config.status: creating opal/mca/event/Makefile
>> > config.status: creating opal/mca/event/libevent207/Makefile
>> > config.status: error: cannot find input file:
>> `opal/mca/event/libevent207/libevent/include/event2/event-config.h.in'
>> > make: *** [distcheck] Error 1
>> > ===
>> >
>> > Your friendly daemon,
>> > Cyrador
>> > ___
>> > testing mailing list
>> > test...@open-mpi.org
>> > 
>> http://www.open-mpi.org/mailman/listinfo.cgi/testing
>>
>>
>> --
>> Jeff Squyres
>>  jsquy...@cisco.com
>> For corporate legal information go to:
>>  
>> http://www.cisco.com/web/about/doing_business/legal/cri/
>>
>>
>> ___
>> devel mailing list
>>  de...@open-mpi.org
>>  
>> http://www.open-mpi.org/mailman/listinfo.cgi/devel
>>
>
> 
>
> ___
> devel mailing list
> de...@open-mpi.org
>

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2010-11-01 Thread Jeff Squyres

Sorry for the delay on this -- the issue was quite subtle and the holiday 
weekend got in the way.

I have a fix that will be committed a little after 6pm US Eastern.  It seems to 
allow a fresh SVN checkout (with my patch applied) to pass "make distcheck".  
Hopefully we'll finally get a new trunk tarball tonight.


On Oct 31, 2010, at 9:16 PM, MPI Team wrote:

> 
> ERROR: Command returned a non-zero exist status (trunk):
>   make distcheck
> 
> Start time: Sun Oct 31 21:00:12 EDT 2010
> End time:   Sun Oct 31 21:16:33 EDT 2010
> 
> ===
> [... previous lines snipped ...]
> checking for OPAL CXXFLAGS... -pthread 
> checking for OPAL CXXFLAGS_PREFIX...  
> checking for OPAL LDFLAGS...   
> checking for OPAL LIBS... -ldl   -Wl,--export-dynamic -lrt -lnsl -lutil -lm 
> -ldl 
> checking for OPAL extra include dirs... 
> checking for ORTE CPPFLAGS... 
> checking for ORTE CXXFLAGS... -pthread 
> checking for ORTE CXXFLAGS_PREFIX...  
> checking for ORTE CFLAGS... -pthread 
> checking for ORTE CFLAGS_PREFIX...  
> checking for ORTE LDFLAGS...
> checking for ORTE LIBS...  -ldl   -Wl,--export-dynamic -lrt -lnsl -lutil -lm 
> -ldl 
> checking for ORTE extra include dirs... 
> checking for OMPI CPPFLAGS... 
> checking for OMPI CFLAGS... -pthread 
> checking for OMPI CFLAGS_PREFIX...  
> checking for OMPI CXXFLAGS... -pthread 
> checking for OMPI CXXFLAGS_PREFIX...  
> checking for OMPI FFLAGS... -pthread 
> checking for OMPI FFLAGS_PREFIX...  
> checking for OMPI FCFLAGS... -pthread 
> checking for OMPI FCFLAGS_PREFIX...  
> checking for OMPI LDFLAGS... 
> checking for OMPI LIBS...   -ldl   -Wl,--export-dynamic -lrt -lnsl -lutil -lm 
> -ldl 
> checking for OMPI extra include dirs... 
> 
> *** Final output
> configure: creating ./config.status
> config.status: creating ompi/include/ompi/version.h
> config.status: creating orte/include/orte/version.h
> config.status: creating opal/include/opal/version.h
> config.status: creating opal/mca/backtrace/Makefile
> config.status: creating opal/mca/backtrace/printstack/Makefile
> config.status: creating opal/mca/backtrace/execinfo/Makefile
> config.status: creating opal/mca/backtrace/darwin/Makefile
> config.status: creating opal/mca/backtrace/none/Makefile
> config.status: creating opal/mca/carto/Makefile
> config.status: creating opal/mca/carto/auto_detect/Makefile
> config.status: creating opal/mca/carto/file/Makefile
> config.status: creating opal/mca/compress/Makefile
> config.status: creating opal/mca/compress/gzip/Makefile
> config.status: creating opal/mca/compress/bzip/Makefile
> config.status: creating opal/mca/crs/Makefile
> config.status: creating opal/mca/crs/none/Makefile
> config.status: creating opal/mca/crs/self/Makefile
> config.status: creating opal/mca/crs/blcr/Makefile
> config.status: creating opal/mca/event/Makefile
> config.status: creating opal/mca/event/libevent207/Makefile
> config.status: error: cannot find input file: 
> `opal/mca/event/libevent207/libevent/include/event2/event-config.h.in'
> make: *** [distcheck] Error 1
> ===
> 
> Your friendly daemon,
> Cyrador
> ___
> testing mailing list
> test...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/testing


-- 
Jeff Squyres
jsquy...@cisco.com
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2010-10-29 Thread Jeff Squyres

I have fixes for this, but they're .m4 changes (stupid VPATH stuff; sorry) -- 
so I'll commit them tonight after 6pm US Eastern.



On Oct 28, 2010, at 9:16 PM, MPI Team wrote:

> 
> ERROR: Command returned a non-zero exist status (trunk):
>   make distcheck
> 
> Start time: Thu Oct 28 21:00:05 EDT 2010
> End time:   Thu Oct 28 21:16:19 EDT 2010
> 
> ===
> [... previous lines snipped ...]
> checking for OPAL CXXFLAGS... -pthread 
> checking for OPAL CXXFLAGS_PREFIX...  
> checking for OPAL LDFLAGS...   
> checking for OPAL LIBS... -ldl   -Wl,--export-dynamic -lrt -lnsl -lutil -lm 
> -ldl 
> checking for OPAL extra include dirs... 
> checking for ORTE CPPFLAGS... 
> checking for ORTE CXXFLAGS... -pthread 
> checking for ORTE CXXFLAGS_PREFIX...  
> checking for ORTE CFLAGS... -pthread 
> checking for ORTE CFLAGS_PREFIX...  
> checking for ORTE LDFLAGS...
> checking for ORTE LIBS...  -ldl   -Wl,--export-dynamic -lrt -lnsl -lutil -lm 
> -ldl 
> checking for ORTE extra include dirs... 
> checking for OMPI CPPFLAGS... 
> checking for OMPI CFLAGS... -pthread 
> checking for OMPI CFLAGS_PREFIX...  
> checking for OMPI CXXFLAGS... -pthread 
> checking for OMPI CXXFLAGS_PREFIX...  
> checking for OMPI FFLAGS... -pthread 
> checking for OMPI FFLAGS_PREFIX...  
> checking for OMPI FCFLAGS... -pthread 
> checking for OMPI FCFLAGS_PREFIX...  
> checking for OMPI LDFLAGS... 
> checking for OMPI LIBS...   -ldl   -Wl,--export-dynamic -lrt -lnsl -lutil -lm 
> -ldl 
> checking for OMPI extra include dirs... 
> 
> *** Final output
> configure: creating ./config.status
> config.status: creating ompi/include/ompi/version.h
> config.status: creating orte/include/orte/version.h
> config.status: creating opal/include/opal/version.h
> config.status: creating opal/mca/backtrace/Makefile
> config.status: creating opal/mca/backtrace/printstack/Makefile
> config.status: creating opal/mca/backtrace/execinfo/Makefile
> config.status: creating opal/mca/backtrace/darwin/Makefile
> config.status: creating opal/mca/backtrace/none/Makefile
> config.status: creating opal/mca/carto/Makefile
> config.status: creating opal/mca/carto/auto_detect/Makefile
> config.status: creating opal/mca/carto/file/Makefile
> config.status: creating opal/mca/compress/Makefile
> config.status: creating opal/mca/compress/gzip/Makefile
> config.status: creating opal/mca/compress/bzip/Makefile
> config.status: creating opal/mca/crs/Makefile
> config.status: creating opal/mca/crs/none/Makefile
> config.status: creating opal/mca/crs/self/Makefile
> config.status: creating opal/mca/crs/blcr/Makefile
> config.status: creating opal/mca/event/Makefile
> config.status: creating opal/mca/event/libevent207/Makefile
> config.status: error: cannot find input file: 
> `opal/mca/event/libevent207/libevent/include/event2/event-config.h.in'
> make: *** [distcheck] Error 1
> ===
> 
> Your friendly daemon,
> Cyrador
> ___
> testing mailing list
> test...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/testing


-- 
Jeff Squyres
jsquy...@cisco.com
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2010-02-08 Thread Jeff Squyres

The build machine at IU was running out of disk space.

I'm not 100% sure that this is the underlying error, but I'm going to kick off 
another build and see if we get the same dist error.  If so, I'll dig more.


On Feb 7, 2010, at 9:13 PM, MPI Team wrote:

> 
> ERROR: Command returned a non-zero exist status (trunk):
>make distcheck
> 
> Start time: Sun Feb  7 21:00:06 EST 2010
> End time:   Sun Feb  7 21:13:33 EST 2010
> 
> ===
> [... previous lines snipped ...]
>   CC opal_convertor_raw.lo
>   CC opal_copy_functions.lo
>   CC opal_copy_functions_heterogeneous.lo
>   CC opal_datatype_add.lo
>   CC opal_datatype_clone.lo
>   CC opal_datatype_copy.lo
>   CC opal_datatype_create.lo
>   CC opal_datatype_create_contiguous.lo
>   CC opal_datatype_destroy.lo
>   CC opal_datatype_dump.lo
>   CC opal_datatype_fake_stack.lo
>   CC opal_datatype_get_count.lo
>   CC opal_datatype_module.lo
>   CC opal_datatype_optimize.lo
>   CC opal_datatype_pack.lo
>   CC opal_datatype_position.lo
>   CC opal_datatype_resize.lo
>   CC opal_datatype_unpack.lo
>   CCLD   libdatatype.la
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/datatype'
> Making all in etc
> make[3]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/etc'
> make[3]: Nothing to be done for `all'.
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/etc'
> Making all in event
> make[3]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/event'
> Making all in compat
> make[4]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/event/compat'
> Making all in sys
> make[5]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/event/compat/sys'
> make[5]: Nothing to be done for `all'.
> make[5]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/event/compat/sys'
> make[5]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/event/compat'
> make[5]: Nothing to be done for `all-am'.
> make[5]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/event/compat'
> make[4]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/event/compat'
> make[4]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/event'
>   CC event.lo
>   CC log.lo
>   CC evutil.lo
> ../../../opal/event/evutil.c:201:2: #error "I don't know how to parse 64-bit 
> integers."
> make[4]: *** [evutil.lo] Error 1
> make[4]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/event'
> make[3]: *** [all-recursive] Error 1
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal/event'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build/opal'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22568/ompi/openmpi-1.7a1r22568/_build'
> make: *** [distcheck] Error 1
> ===
> 
> Your friendly daemon,
> Cyrador
> ___
> testing mailing list
> test...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/testing
> 


-- 
Jeff Squyres
jsquy...@cisco.com

For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2010-02-05 Thread Jeff Squyres

This was a mistake in the libevent refresh (two files disappeared from libevent 
that were still listed in our Makefile.am).  Fixed in r22562.


On Feb 4, 2010, at 9:35 PM, MPI Team wrote:

> 
> ERROR: Command returned a non-zero exist status (trunk):
>make distcheck
> 
> Start time: Thu Feb  4 21:27:00 EST 2010
> End time:   Thu Feb  4 21:35:05 EST 2010
> 
> ===
> [... previous lines snipped ...]
>  am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
> make[2]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal/asm'
> make  \
>   top_distdir="../../openmpi-1.7a1r22560" 
> distdir="../../openmpi-1.7a1r22560/opal/asm" \
>   dist-hook
> make[3]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal/asm'
> mkdir "../../openmpi-1.7a1r22560/opal/asm/generated"
> perl "../../opal/asm/generate-all-asm.pl" "perl" "." 
> "../../openmpi-1.7a1r22560/opal/asm"
> --> Generating assembly for "ALPHA" "default-.text-.globl-:--$-@-1-1-1-1-1"
> --> Generating assembly for "AMD64" "default-.text-.globl-:--.L-@-1-0-1-1-1"
> --> Generating assembly for "AMD64" "default-.text-.globl-:--.L-@-1-0-1-1-0"
> --> Generating assembly for "IA32" "default-.text-.globl-:--.L-@-1-0-1-1-1"
> --> Generating assembly for "IA32" "default-.text-.globl-:--.L-@-1-0-1-1-0"
> --> Generating assembly for "IA32" "default-.text-.globl-:-_-L--0-1-1-1-0"
> --> Generating assembly for "IA32" "default-.text-.globl-:-_-L--0-0-1-1-1"
> --> Generating assembly for "IA32" "default-.text-.globl-:-_-L--0-0-1-1-0"
> --> Generating assembly for "IA64" "default-.text-.globl-:--.L-@-1-0-1-1-1"
> --> Generating assembly for "IA64" "default-.text-.globl-:--.L-@-1-0-1-1-0"
> --> Generating assembly for "POWERPC32" 
> "default-.text-.globl-:-_-L--0-1-1-0-0"
> --> Generating assembly for "POWERPC32" 
> "default-.text-.globl-:--.L-@-1-1-0-0-1"
> --> Generating assembly for "POWERPC32" 
> "default-.text-.globl-:--.L-@-1-1-0-0-0"
> --> Generating assembly for "POWERPC32" "aix-.csect 
> .text[PR]-.globl-:-.-L--0-1-0-0-0"
> --> Generating assembly for "POWERPC32" 
> "default-.text-.globl-:-_-L--0-1-1-1-0"
> --> Generating assembly for "POWERPC64" 
> "default-.text-.globl-:-_-L--0-1-1-1-0"
> --> Generating assembly for "POWERPC64" 
> "default-.text-.globl-:-.-.L-@-1-1-0-1-1"
> --> Generating assembly for "POWERPC64" 
> "default-.text-.globl-:-.-.L-@-1-1-0-1-0"
> --> Generating assembly for "POWERPC64" "aix-.csect 
> .text[PR]-.globl-:-.-L--0-1-0-1-0"
> --> Generating assembly for "SPARC" "default-.text-.globl-:--.L-#-1-0-1-0-0"
> --> Generating assembly for "SPARCV9_32" 
> "default-.text-.globl-:--.L-#-1-0-1-1-0"
> --> Generating assembly for "SPARCV9_64" 
> "default-.text-.globl-:--.L-#-1-0-1-1-0"
> --> Generating assembly for "MIPS" "default-.text-.globl-:--L--1-1-1-1-0"
> --> Generating assembly for "MIPS" "default-.text-.globl-:--L--1-1-1-1-0"
> make[3]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal/asm'
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal/asm'
>  (cd datatype && make  top_distdir=../../openmpi-1.7a1r22560 
> distdir=../../openmpi-1.7a1r22560/opal/datatype \
>  am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
> make[2]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal/datatype'
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal/datatype'
>  (cd etc && make  top_distdir=../../openmpi-1.7a1r22560 
> distdir=../../openmpi-1.7a1r22560/opal/etc \
>  am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
> make[2]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal/etc'
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal/etc'
>  (cd event && make  top_distdir=../../openmpi-1.7a1r22560 
> distdir=../../openmpi-1.7a1r22560/opal/event \
>  am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
> make[2]: Entering directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal/event'
> make[2]: *** No rule to make target `WIN32-Code/misc.c', needed by `distdir'. 
>  Stop.
> make[2]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal/event'
> make[1]: *** [distdir] Error 1
> make[1]: Leaving directory 
> `/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/create-r22560/ompi/opal'
> make: *** [distdir] Error 1
> ===
> 
> Your friendly daemon,
> Cyrador
> ___
> testing

Re: [OMPI devel] === CREATE FAILURE (v1.4) ===

2009-12-02 Thread Jeff Squyres

Oops.  This was a mistake in how I initially setup the v1.4 nightly builds 
yesterday (i.e., a local config error on eddie, the machine that makes the 
nightly builds).  I'll fix now...


On Dec 1, 2009, at 9:00 PM, MPI Team wrote:

> 
> ERROR: Command returned a non-zero exist status (v1.4):
>./autogen.sh
> 
> Start time: Tue Dec  1 21:00:04 EST 2009
> End time:   Tue Dec  1 21:00:28 EST 2009
> 
> ===
> [Checking] command line parameters
> [Checking] prerequisites
> Configuring projects: opal orte ompi
> I could not find a recent enough copy of aclocal.
> I am gonna abort.  :-(
> 
> Please make sure you are using at least the following versions of the
> GNU tools:
> 
> GNU Autoconf 2.59
> GNU Automake 1.9.6
> NOTE: You may need Automake 1.8.5 (or higher) in order to run
> "make dist" successfully
> GNU Libtool  1.5.22
> 
> ===
> 
> Your friendly daemon,
> Cyrador
> ___
> testing mailing list
> test...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/testing
> 


-- 
Jeff Squyres
jsquy...@cisco.com

Re: [OMPI devel] === CREATE FAILURE (v1.5) ===

2009-11-04 Thread Jeff Squyres


Sorry -- I dropped offline last night.  Re-starting it now...

On Nov 3, 2009, at 9:51 PM, George Bosilca wrote:


Mea culpa. Should be fixed now. If you can please restart the testing
process.

   Thanks,
 george.

On Nov 3, 2009, at 21:35 , MPI Team wrote:

>
> ERROR: Command returned a non-zero exist status (v1.5):
>   ./configure --enable-dist
>
> Start time: Tue Nov  3 21:30:07 EST 2009
> End time:   Tue Nov  3 21:35:17 EST 2009
>
> =
>  
==

> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... /bin/mkdir -p
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking how to create a ustar tar archive... gnutar
>
> =
> =
> =
> =
> =
> =
>  
==

> == Configuring Open MPI
> =
> =
> =
> =
> =
> =
>  
==

>
> *** Checking versions
> checking Open MPI version... 1.5a1r22187
> checking Open MPI release date... Unreleased developer copy
> checking Open MPI Subversion repository version... r22187
> checking Open Run-Time Environment version... 1.5a1r22187
> checking Open Run-Time Environment release date... Unreleased
> developer copy
> checking Open Run-Time Environment Subversion repository version...
> r22187
> checking Open Portable Access Layer version... 1.5a1r22187
> checking Open Portable Access Layer release date... Unreleased
> developer copy
> checking Open Portable Access Layer Subversion repository version...
> r22187
> ./configure: line 5910: syntax error near unexpected token `<<<'
> ./configure: line 5910: `<<< .working'
> =
>  
==

>
> Your friendly daemon,
> Cyrador
> ___
> testing mailing list
> test...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/testing

___
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel




--
Jeff Squyres
jsquy...@cisco.com

Re: [OMPI devel] === CREATE FAILURE (v1.5) ===

2009-11-03 Thread George Bosilca

Mea culpa. Should be fixed now. If you can please restart the testing  
process.


  Thanks,
george.

On Nov 3, 2009, at 21:35 , MPI Team wrote:



ERROR: Command returned a non-zero exist status (v1.5):
  ./configure --enable-dist

Start time: Tue Nov  3 21:30:07 EST 2009
End time:   Tue Nov  3 21:35:17 EST 2009

= 
==

checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar

= 
= 
= 
= 
= 
= 
==

== Configuring Open MPI
= 
= 
= 
= 
= 
= 
==


*** Checking versions
checking Open MPI version... 1.5a1r22187
checking Open MPI release date... Unreleased developer copy
checking Open MPI Subversion repository version... r22187
checking Open Run-Time Environment version... 1.5a1r22187
checking Open Run-Time Environment release date... Unreleased  
developer copy
checking Open Run-Time Environment Subversion repository version...  
r22187

checking Open Portable Access Layer version... 1.5a1r22187
checking Open Portable Access Layer release date... Unreleased  
developer copy
checking Open Portable Access Layer Subversion repository version...  
r22187

./configure: line 5910: syntax error near unexpected token `<<<'
./configure: line 5910: `<<< .working'
= 
==


Your friendly daemon,
Cyrador
___
testing mailing list
test...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/testing

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2009-05-27 Thread Josh Hursey


This should be fixed in r21293.

Sorry about that.

On May 27, 2009, at 9:10 AM, Josh Hursey wrote:

It seems that the MPI Extensions commit broke that tarball  
(distcheckclean) last night. This shouldn't effect too many people,  
but I am working on a solution so hopefully everything is better  
tonight.


-- Josh

On May 26, 2009, at 9:53 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status (trunk):
 make distcheck

Start time: Tue May 26 21:26:07 EDT 2009
End time:   Tue May 26 21:53:45 EDT 2009

= 
= 
=

[... previous lines snipped ...]
test -z "" || rm -f
rm -f class/.deps/.dirstamp
rm -f class/.dirstamp
rm -f dss/.deps/.dirstamp
rm -f dss/.dirstamp
rm -f memoryhooks/.deps/.dirstamp
rm -f memoryhooks/.dirstamp
rm -f runtime/.deps/.dirstamp
rm -f runtime/.dirstamp
rm -f threads/.deps/.dirstamp
rm -f threads/.dirstamp
rm -f win32/.deps/.dirstamp
rm -f win32/.dirstamp
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/opal'
rm -rf class/.deps dss/.deps memoryhooks/.deps runtime/.deps  
threads/.deps win32/.deps

rm -f Makefile
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/opal'

Making distclean in contrib
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/ 
contrib'

test -z "*~ .#*" || rm -f *~ .#*
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/ 
contrib'

Making distclean in config
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/ 
config'

test -z "*~ .#*" || rm -f *~ .#*
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/ 
config'

Making distclean in .
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build'

test -z "*~ .#*" || rm -f *~ .#*
rm -rf .libs _libs
rm -f *.lo
test -z "ompi/include/ompi/version.h orte/include/orte/version.h  
opal/include/opal/version.h" || rm -f ompi/include/ompi/version.h  
orte/include/orte/version.h opal/include/opal/version.h

rm -f libtool
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build'
rm -f config.status config.cache config.log configure.lineno  
config.status.lineno

rm -f Makefile
ERROR: files left in build directory after distclean:
./ompi/include/mpi-ext.h
make[1]: *** [distcleancheck] Error 1
make[1]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build'

make: *** [distcheck] Error 2
= 
= 
=


Your friendly daemon,
Cyrador
___
testing mailing list
test...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/testing


___
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2009-05-27 Thread Josh Hursey

It seems that the MPI Extensions commit broke that tarball  
(distcheckclean) last night. This shouldn't effect too many people,  
but I am working on a solution so hopefully everything is better  
tonight.


-- Josh

On May 26, 2009, at 9:53 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status (trunk):
  make distcheck

Start time: Tue May 26 21:26:07 EDT 2009
End time:   Tue May 26 21:53:45 EDT 2009

= 
==

[... previous lines snipped ...]
test -z "" || rm -f
rm -f class/.deps/.dirstamp
rm -f class/.dirstamp
rm -f dss/.deps/.dirstamp
rm -f dss/.dirstamp
rm -f memoryhooks/.deps/.dirstamp
rm -f memoryhooks/.dirstamp
rm -f runtime/.deps/.dirstamp
rm -f runtime/.dirstamp
rm -f threads/.deps/.dirstamp
rm -f threads/.dirstamp
rm -f win32/.deps/.dirstamp
rm -f win32/.dirstamp
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/opal'
rm -rf class/.deps dss/.deps memoryhooks/.deps runtime/.deps  
threads/.deps win32/.deps

rm -f Makefile
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/opal'

Making distclean in contrib
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/ 
contrib'

test -z "*~ .#*" || rm -f *~ .#*
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/ 
contrib'

Making distclean in config
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/config'

test -z "*~ .#*" || rm -f *~ .#*
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build/config'

Making distclean in .
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build'

test -z "*~ .#*" || rm -f *~ .#*
rm -rf .libs _libs
rm -f *.lo
test -z "ompi/include/ompi/version.h orte/include/orte/version.h  
opal/include/opal/version.h" || rm -f ompi/include/ompi/version.h  
orte/include/orte/version.h opal/include/opal/version.h

rm -f libtool
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build'
rm -f config.status config.cache config.log configure.lineno  
config.status.lineno

rm -f Makefile
ERROR: files left in build directory after distclean:
./ompi/include/mpi-ext.h
make[1]: *** [distcleancheck] Error 1
make[1]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r21285/ompi/openmpi-1.4a1r21285/_build'

make: *** [distcheck] Error 2
= 
==


Your friendly daemon,
Cyrador
___
testing mailing list
test...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/testing

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2009-03-23 Thread Ralph Castain

Wow, sometimes I even amaze myself! Two for two on create failures in  
a single night!!


:-)

Anyway, both are fixed or shortly will be. However, there will be no  
MTT runs tonight as neither branch successfully generated a tarball.


Ralph


On Mar 23, 2009, at 7:30 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status (trunk):
  make distcheck

Start time: Mon Mar 23 21:22:33 EDT 2009
End time:   Mon Mar 23 21:30:20 EDT 2009

= 
==
{ test ! -d openmpi-1.4a1r20848 || { find openmpi-1.4a1r20848 -type  
d ! -perm -200 -exec chmod u+w {} ';' && rm -fr  
openmpi-1.4a1r20848; }; }

test -d openmpi-1.4a1r20848 || mkdir openmpi-1.4a1r20848
list='config contrib opal orte ompi test'; for subdir in $list; do \
 if test "$subdir" = .; then :; else \
   test -d "openmpi-1.4a1r20848/$subdir" \
   || /bin/mkdir -p "openmpi-1.4a1r20848/$subdir" \
   || exit 1; \
   distdir=`CDPATH="${ZSH_VERSION+.}:" && cd openmpi-1.4a1r20848 &&  
pwd`; \
   top_distdir=`CDPATH="${ZSH_VERSION+.}:" && cd openmpi-1.4a1r20848  
&& pwd`; \

   (cd $subdir && \
 make  \
   top_distdir="$top_distdir" \
   distdir="$distdir/$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
   distdir) \
 || exit 1; \
 fi; \
done
make[1]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r20848/ompi/config'
make[1]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r20848/ompi/config'
make[1]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r20848/ompi/contrib'
make[1]: *** No rule to make target `platform/lanl/rr-class/ 
debug.conf', needed by `distdir'.  Stop.
make[1]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r20848/ompi/contrib'

make: *** [distdir] Error 1
= 
==


Your friendly daemon,
Cyrador
___
testing mailing list
test...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/testing

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2009-02-17 Thread Jeff Squyres

This should be fixed in r20576; I'll go start a new tarball build  
right now...



On Feb 16, 2009, at 9:33 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status (trunk):
  ./configure --enable-dist

Start time: Mon Feb 16 21:26:57 EST 2009
End time:   Mon Feb 16 21:33:03 EST 2009

= 
==

[... previous lines snipped ...]
+++ Configuring MCA framework memory
checking for no configure components in framework memory...
checking for m4 configure components in framework memory...  
ptmalloc2, malloc_solaris, mallopt


--- MCA component memory:ptmalloc2 (m4 configuration macro)
checking for MCA component memory:ptmalloc2 compile mode... static
checking if ptmalloc2 should be part of libopen-pal... no
checking for malloc.h... (cached) yes
checking whether __malloc_initialize_hook is declared... yes
checking whether sbrk is declared... yes
checking syscall.h usability... yes
checking syscall.h presence... yes
checking for syscall.h... yes
checking for syscall... yes
checking for __munmap... no
checking for __mmap... no
checking for dlsym in -ldl... yes
checking for dlsym... yes
checking if MCA component memory:ptmalloc2 can compile... yes

--- MCA component memory:malloc_solaris (m4 configuration macro)
checking for MCA component memory:malloc_solaris compile mode...  
static

checking if MCA component memory:malloc_solaris can compile... no

--- MCA component memory:mallopt (m4 configuration macro)
checking for MCA component memory:mallopt compile mode... static
checking if MCA component memory:mallopt can compile... no

+++ Configuring MCA framework paffinity
checking for no configure components in framework paffinity...
checking for m4 configure components in framework paffinity...  
linux, solaris, windows, darwin, posix


--- MCA component paffinity:linux (m4 configuration macro)
checking for MCA component paffinity:linux compile mode... dso
checking for syscall... (cached) yes
checking sys/syscall.h usability... yes
checking sys/syscall.h presence... yes
checking for sys/syscall.h... yes
checking for unistd.h... (cached) yes
checking for __NR_sched_setaffinity... yes
checking for __NR_sched_getaffinity... yes
checking for PLPA building mode... included
checking if want PLPA maintainer support... enabled (SVN checkout  
default)

checking for PLPA config prefix... opal/mca/paffinity/linux/plpa
checking for PLPA symbol prefix... opal_paffinity_linux_plpa_
checking valgrind/valgrind.h usability... yes
checking valgrind/valgrind.h presence... yes
checking for valgrind/valgrind.h... yes
checking for VALGRIND_CHECK_MEM_IS_ADDRESSABLE... no
configure: error: Need Valgrind version 3.2.0 or later.
= 
==


Your friendly daemon,
Cyrador
___
testing mailing list
test...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/testing



--
Jeff Squyres
Cisco Systems

Re: [OMPI devel] === CREATE FAILURE (v1.3) ===

2009-01-20 Thread Jeff Squyres

This problem has been fixed (thankfully, it occurred after the v1.3  
tarballs were made).


The problem is that ftp.gnu.org has disabled repository downloads of  
config.guess and config.sub while some git vulnerability is being  
fixed.  Hence, the scripts that we downloaded while making the  
tarballs [intentionally] have a syntax error that makes the script un- 
runnable.


We've make OMPI's distscript a little more resilient now -- it checks  
that the config.guess/config.sub are runnable  before schlepping them  
into the new tarball.




On Jan 20, 2009, at 10:09 AM, MPI Team wrote:



ERROR: Command returned a non-zero exist status (v1.3):
   make distcheck

Start time: Tue Jan 20 10:00:08 EST 2009
End time:   Tue Jan 20 10:09:20 EST 2009

= 
==

[... previous lines snipped ...]
  && ../configure --srcdir=.. --prefix="$dc_install_base" \
 \
  && make  \
  && make  dvi \
  && make  check \
  && make  install \
  && make  installcheck \
  && make  uninstall \
  && make  distuninstallcheck_dir="$dc_install_base" \
distuninstallcheck \
  && chmod -R a-w "$dc_install_base" \
  && ({ \
   (cd ../.. && umask 077 && mkdir "$dc_destdir") \
   && make  DESTDIR="$dc_destdir" install \
   && make  DESTDIR="$dc_destdir" uninstall \
   && make  DESTDIR="$dc_destdir" \
distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
  } || { rm -rf "$dc_destdir"; exit 1; }) \
  && rm -rf "$dc_destdir" \
  && make  dist \
  && rm -rf openmpi-1.3.1a0r20299.tar.gz  
openmpi-1.3.1a0r20299.tar.bz2 \

  && make  distcleancheck
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar

= 
= 
= 
= 
= 
= 
==

== Configuring Open MPI
= 
= 
= 
= 
= 
= 
==


*** Checking versions
checking Open MPI version... 1.3.1a0r20299
checking Open MPI release date... Unreleased developer copy
checking Open MPI Subversion repository version... r20299
checking Open Run-Time Environment version... 1.3.1a0r20299
checking Open Run-Time Environment release date... Unreleased  
developer copy
checking Open Run-Time Environment Subversion repository version...  
r20299

checking Open Portable Access Layer version... 1.3.1a0r20299
checking Open Portable Access Layer release date... Unreleased  
developer copy
checking Open Portable Access Layer Subversion repository version...  
r20299


*** Initialization, setup
configure: builddir: /home/mpiteam/openmpi/nightly-tarball-build- 
root/v1.3/create-r20299/ompi/openmpi-1.3.1a0r20299/_build
configure: srcdir: /home/mpiteam/openmpi/nightly-tarball-build-root/ 
v1.3/create-r20299/ompi/openmpi-1.3.1a0r20299

configure: Detected VPATH build
configure: error: cannot run /bin/sh ../config/config.sub
make: *** [distcheck] Error 1
= 
==


Your friendly daemon,
Cyrador
___
testing mailing list
test...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/testing



--
Jeff Squyres
Cisco Systems

Re: [OMPI devel] === CREATE FAILURE (v1.3) ===

2008-10-08 Thread Tim Mattox

Hi everyone,
Sorry about that.  I should have done a manual tarball build when I
finished with
the day's worth of CMRs to make sure I didn't miss something.  Will do
so next time.
Thanks Josh for figuring out what I missed!

On Tue, Oct 7, 2008 at 11:25 PM, Josh Hursey  wrote:
> The build failure was caused because r19606 was not moved as part of the CMR
> 1512 (it was an addition mentioned in the comments):
>  https://svn.open-mpi.org/trac/ompi/ticket/1512
>
> If you move over r19606 then the build should be fine.
>
> -- Josh
>
> On Oct 7, 2008, at 9:11 PM, MPI Team wrote:
>
>>
>> ERROR: Command returned a non-zero exist status (v1.3):
>>   make distcheck
>>
>> Start time: Tue Oct  7 21:00:26 EDT 2008
>> End time:   Tue Oct  7 21:11:07 EDT 2008
>>
>> ===
>> [... previous lines snipped ...]
>> /bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.
>> -I../../opal -I../opal/include -I../orte/include -I../ompi/include
>> -I../opal/mca/paffinity/linux/plpa/src/libplpa   -I../.. -I..
>> -I../../opal/include -I../../orte/include -I../../ompi/include-O3
>> -DNDEBUG -finline-functions -fno-strict-aliasing -pthread
>> -fvisibility=hidden -MT class/opal_graph.lo -MD -MP -MF $depbase.Tpo -c -o
>> class/opal_graph.lo ../../opal/class/opal_graph.c &&\
>> mv -f $depbase.Tpo $depbase.Plo
>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../opal -I../opal/include
>> -I../orte/include -I../ompi/include
>> -I../opal/mca/paffinity/linux/plpa/src/libplpa -I../.. -I..
>> -I../../opal/include -I../../orte/include -I../../ompi/include -O3 -DNDEBUG
>> -finline-functions -fno-strict-aliasing -pthread -fvisibility=hidden -MT
>> class/opal_graph.lo -MD -MP -MF class/.deps/opal_graph.Tpo -c
>> ../../opal/class/opal_graph.c  -fPIC -DPIC -o class/.libs/opal_graph.o
>> depbase=`echo class/opal_atomic_lifo.lo | sed
>> 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
>> /bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.
>> -I../../opal -I../opal/include -I../orte/include -I../ompi/include
>> -I../opal/mca/paffinity/linux/plpa/src/libplpa   -I../.. -I..
>> -I../../opal/include -I../../orte/include -I../../ompi/include-O3
>> -DNDEBUG -finline-functions -fno-strict-aliasing -pthread
>> -fvisibility=hidden -MT class/opal_atomic_lifo.lo -MD -MP -MF $depbase.Tpo
>> -c -o class/opal_atomic_lifo.lo ../../opal/class/opal_atomic_lifo.c &&\
>> mv -f $depbase.Tpo $depbase.Plo
>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../opal -I../opal/include
>> -I../orte/include -I../ompi/include
>> -I../opal/mca/paffinity/linux/plpa/src/libplpa -I../.. -I..
>> -I../../opal/include -I../../orte/include -I../../ompi/include -O3 -DNDEBUG
>> -finline-functions -fno-strict-aliasing -pthread -fvisibility=hidden -MT
>> class/opal_atomic_lifo.lo -MD -MP -MF class/.deps/opal_atomic_lifo.Tpo -c
>> ../../opal/class/opal_atomic_lifo.c  -fPIC -DPIC -o
>> class/.libs/opal_atomic_lifo.o
>> depbase=`echo class/opal_pointer_array.lo | sed
>> 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
>> /bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.
>> -I../../opal -I../opal/include -I../orte/include -I../ompi/include
>> -I../opal/mca/paffinity/linux/plpa/src/libplpa   -I../.. -I..
>> -I../../opal/include -I../../orte/include -I../../ompi/include-O3
>> -DNDEBUG -finline-functions -fno-strict-aliasing -pthread
>> -fvisibility=hidden -MT class/opal_pointer_array.lo -MD -MP -MF $depbase.Tpo
>> -c -o class/opal_pointer_array.lo ../../opal/class/opal_pointer_array.c &&\
>> mv -f $depbase.Tpo $depbase.Plo
>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../opal -I../opal/include
>> -I../orte/include -I../ompi/include
>> -I../opal/mca/paffinity/linux/plpa/src/libplpa -I../.. -I..
>> -I../../opal/include -I../../orte/include -I../../ompi/include -O3 -DNDEBUG
>> -finline-functions -fno-strict-aliasing -pthread -fvisibility=hidden -MT
>> class/opal_pointer_array.lo -MD -MP -MF class/.deps/opal_pointer_array.Tpo
>> -c ../../opal/class/opal_pointer_array.c  -fPIC -DPIC -o
>> class/.libs/opal_pointer_array.o
>> depbase=`echo class/opal_value_array.lo | sed
>> 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
>> /bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.
>> -I../../opal -I../opal/include -I../orte/include -I../ompi/include
>> -I../opal/mca/paffinity/linux/plpa/src/libplpa   -I../.. -I..
>> -I../../opal/include -I../../orte/include -I../../ompi/include-O3
>> -DNDEBUG -finline-functions -fno-strict-aliasing -pthread
>> -fvisibility=hidden -MT class/opal_value_array.lo -MD -MP -MF $depbase.Tpo
>> -c -o class/opal_value_array.lo ../../opal/class/opal_value_array.c &&\
>> mv -f $depbase.Tpo $depbase.Plo
>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../opal -I../opal/include
>> -I../orte/include -I../ompi/include
>> -I../opal/mca/paffinity/linux/plpa/src/libplpa -I../.. -I..
>> -I../../opal/include -I../../orte/include -I../../ompi/include -O3 -DNDEBUG

Re: [OMPI devel] === CREATE FAILURE (v1.3) ===

2008-10-08 Thread Josh Hursey

The build failure was caused because r19606 was not moved as part of  
the CMR 1512 (it was an addition mentioned in the comments):

  https://svn.open-mpi.org/trac/ompi/ticket/1512

If you move over r19606 then the build should be fine.

-- Josh

On Oct 7, 2008, at 9:11 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status (v1.3):
   make distcheck

Start time: Tue Oct  7 21:00:26 EDT 2008
End time:   Tue Oct  7 21:11:07 EDT 2008

== 
=

[... previous lines snipped ...]
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I. -I../../opal -I../opal/include -I../orte/include -I../ompi/ 
include -I../opal/mca/paffinity/linux/plpa/src/libplpa   -I../.. - 
I.. -I../../opal/include -I../../orte/include -I../../ompi/ 
include-O3 -DNDEBUG -finline-functions -fno-strict-aliasing - 
pthread -fvisibility=hidden -MT class/opal_graph.lo -MD -MP -MF  
$depbase.Tpo -c -o class/opal_graph.lo ../../opal/class/ 
opal_graph.c &&\

mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../opal -I../opal/ 
include -I../orte/include -I../ompi/include -I../opal/mca/paffinity/ 
linux/plpa/src/libplpa -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -fvisibility=hidden -MT class/ 
opal_graph.lo -MD -MP -MF class/.deps/opal_graph.Tpo -c ../../opal/ 
class/opal_graph.c  -fPIC -DPIC -o class/.libs/opal_graph.o
depbase=`echo class/opal_atomic_lifo.lo | sed 's|[^/]*$|.deps/&|;s| 
\.lo$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I. -I../../opal -I../opal/include -I../orte/include -I../ompi/ 
include -I../opal/mca/paffinity/linux/plpa/src/libplpa   -I../.. - 
I.. -I../../opal/include -I../../orte/include -I../../ompi/ 
include-O3 -DNDEBUG -finline-functions -fno-strict-aliasing - 
pthread -fvisibility=hidden -MT class/opal_atomic_lifo.lo -MD -MP - 
MF $depbase.Tpo -c -o class/opal_atomic_lifo.lo ../../opal/class/ 
opal_atomic_lifo.c &&\

mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../opal -I../opal/ 
include -I../orte/include -I../ompi/include -I../opal/mca/paffinity/ 
linux/plpa/src/libplpa -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -fvisibility=hidden -MT class/ 
opal_atomic_lifo.lo -MD -MP -MF class/.deps/opal_atomic_lifo.Tpo - 
c ../../opal/class/opal_atomic_lifo.c  -fPIC -DPIC -o class/.libs/ 
opal_atomic_lifo.o
depbase=`echo class/opal_pointer_array.lo | sed 's|[^/]*$|.deps/ 
&|;s|\.lo$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I. -I../../opal -I../opal/include -I../orte/include -I../ompi/ 
include -I../opal/mca/paffinity/linux/plpa/src/libplpa   -I../.. - 
I.. -I../../opal/include -I../../orte/include -I../../ompi/ 
include-O3 -DNDEBUG -finline-functions -fno-strict-aliasing - 
pthread -fvisibility=hidden -MT class/opal_pointer_array.lo -MD -MP  
-MF $depbase.Tpo -c -o class/opal_pointer_array.lo ../../opal/class/ 
opal_pointer_array.c &&\

mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../opal -I../opal/ 
include -I../orte/include -I../ompi/include -I../opal/mca/paffinity/ 
linux/plpa/src/libplpa -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -fvisibility=hidden -MT class/ 
opal_pointer_array.lo -MD -MP -MF class/.deps/ 
opal_pointer_array.Tpo -c ../../opal/class/opal_pointer_array.c  - 
fPIC -DPIC -o class/.libs/opal_pointer_array.o
depbase=`echo class/opal_value_array.lo | sed 's|[^/]*$|.deps/&|;s| 
\.lo$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I. -I../../opal -I../opal/include -I../orte/include -I../ompi/ 
include -I../opal/mca/paffinity/linux/plpa/src/libplpa   -I../.. - 
I.. -I../../opal/include -I../../orte/include -I../../ompi/ 
include-O3 -DNDEBUG -finline-functions -fno-strict-aliasing - 
pthread -fvisibility=hidden -MT class/opal_value_array.lo -MD -MP - 
MF $depbase.Tpo -c -o class/opal_value_array.lo ../../opal/class/ 
opal_value_array.c &&\

mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../opal -I../opal/ 
include -I../orte/include -I../ompi/include -I../opal/mca/paffinity/ 
linux/plpa/src/libplpa -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -fvisibility=hidden -MT class/ 
opal_value_array.lo -MD -MP -MF class/.deps/opal_value_array.Tpo - 
c ../../opal/class/opal_value_array.c  -fPIC -DPIC -o class/.libs/ 
opal_value_array.o
depbase=`echo memoryhooks/memory.lo | sed 's|[^/]*$|.deps/&|;s|\.lo 
$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I. -I../../opal -I../opal/include

Re: [OMPI devel] === CREATE FAILURE (trunk) ===

2008-08-22 Thread Tim Mattox

Just so everyone knows, the nightly OMPI tarballs from last night all
failed due to
an unfortunate timing of some system maintenance at IU.  Think of it
this way, the resulting
"duplicate" MTT runs from last night might help with diagnosing any
intermittent bugs. :-)

On Thu, Aug 21, 2008 at 9:00 PM, MPI Team  wrote:
>
> ERROR: Command returned a non-zero exist status (trunk):
>   svn co http://svn.open-mpi.org/svn/ompi//trunk -r  ompi
>
> Start time: Thu Aug 21 21:00:33 EDT 2008
> End time:   Thu Aug 21 21:00:33 EDT 2008
>
> ===
> ./create_tarball.sh: line 112: svn: command not found
> ===
>
> Your friendly daemon,
> Cyrador
> ___
> testing mailing list
> test...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/testing
>



-- 
Tim Mattox, Ph.D. - http://homepage.mac.com/tmattox/
 tmat...@gmail.com || timat...@open-mpi.org
 I'm a bright... http://www.the-brights.net/

Re: [OMPI devel] === CREATE FAILURE ===

2008-07-26 Thread Jeff Squyres


I've committed r19045 that should finally fix the problem.  Ugh.


On Jul 26, 2008, at 8:48 AM, Jeff Squyres wrote:

Tim pointed out to me on IM that this was a trunk build, not a v1.3  
build (he's going to update the script to make this error message a  
bit more obvious).


I'm checking into this failure now...


On Jul 25, 2008, at 10:15 PM, Jeff Squyres wrote:


I can find no reason why this failed.  :-(

I can manually run "make dist" on the v1.3 tree successfully, and  
there weren't any changes to 1.3 mpi/Makefile.am in the last 24  
hours.


Did eddie run out of disk space or something?



On Jul 25, 2008, at 9:32 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status
make distcheck

Start time: Fri Jul 25 21:25:23 EDT 2008
End time:   Fri Jul 25 21:32:33 EDT 2008

= 
= 
= 


[... previous lines snipped ...]
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-checkpoint'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-checkpoint'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-clean'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-clean'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-ps'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-ps'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-restart'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-restart'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orted'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orted'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orterun'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orterun'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/wrappers'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/wrappers'
make[1]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte'
make[1]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/ompi'
list='include datatype debuggers etc mpi mca/common  mca/allocator  
mca/bml mca/btl mca/coll mca/crcp mca/dpm mca/io mca/mpool mca/mtl  
mca/osc mca/pml mca/pubsub mca/rcache mca/topo mca/common/sm mca/ 
common/mx mca/common/portals  mca/allocator/basic mca/allocator/ 
bucket mca/bml/r2 mca/btl/self mca/btl/sm mca/btl/elan mca/btl/gm  
mca/btl/mx mca/btl/ofud mca/btl/openib mca/btl/portals mca/btl/ 
sctp mca/btl/tcp mca/btl/udapl mca/coll/basic mca/coll/hierarch  
mca/coll/inter mca/coll/self mca/coll/sm mca/coll/tuned mca/crcp/ 
coord mca/dpm/orte mca/io/romio mca/mpool/rdma mca/mpool/sm mca/ 
mtl/mx mca/mtl/portals mca/mtl/psm mca/osc/pt2pt mca/osc/rdma mca/ 
pml/cm mca/pml/ob1 mca/pml/crcpw mca/pml/dr mca/pml/v mca/pubsub/ 
orte mca/rcache/vma mca/topo/unity contrib/vt tools/ompi_info  
tools/wrappers tools/ortetools tools/ompi-server'; for subdir in  
$list; do \

if test "$subdir" = .; then :; else \
 test -d "/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/ 
create-r19043/ompi/openmpi-1.4a1r19043/ompi/$subdir" \
 || /bin/mkdir -p "/home/mpiteam/openmpi/nightly-tarball-build- 
root/trunk/create-r19043/ompi/openmpi-1.4a1r19043/ompi/$subdir" \

 || exit 1; \
 distdir=`CDPATH="${ZSH_VERSION+.}:" && cd /home/mpiteam/openmpi/ 
nightly-tarball-build-root/trunk/create-r19043/ompi/ 
openmpi-1.4a1r19043/ompi && pwd`; \
 top_distdir=`CDPATH="${ZSH_VERSION+.}:" && cd /home/mpiteam/ 
openmpi/nightly-tarball-build-root/trunk/create-r19043/ompi/ 
openmpi-1.4a1r19043 && pwd`; \

 (cd $subdir && \
   make  \
 top_distdir="$top_distdir" \
 distdir="$distdir/$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
 distdir) \
   || exit 1; \
fi; \
done
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/ompi/include'
cd ../.. && /bin/sh /home/mpiteam/openmpi/nightly-tarball-build- 
root/trunk/create-r19043/ompi/config/missing --run autoheader

rm -f stamp-h3
touch ompi_config.h.in
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball-

Re: [OMPI devel] === CREATE FAILURE ===

2008-07-26 Thread Jeff Squyres

Tim pointed out to me on IM that this was a trunk build, not a v1.3  
build (he's going to update the script to make this error message a  
bit more obvious).


I'm checking into this failure now...


On Jul 25, 2008, at 10:15 PM, Jeff Squyres wrote:


I can find no reason why this failed.  :-(

I can manually run "make dist" on the v1.3 tree successfully, and  
there weren't any changes to 1.3 mpi/Makefile.am in the last 24 hours.


Did eddie run out of disk space or something?



On Jul 25, 2008, at 9:32 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status
 make distcheck

Start time: Fri Jul 25 21:25:23 EDT 2008
End time:   Fri Jul 25 21:32:33 EDT 2008

= 
= 
=

[... previous lines snipped ...]
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-checkpoint'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-checkpoint'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-clean'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-clean'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-ps'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-ps'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-restart'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-restart'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orted'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orted'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orterun'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orterun'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/wrappers'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/wrappers'
make[1]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte'
make[1]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/ompi'
list='include datatype debuggers etc mpi mca/common  mca/allocator  
mca/bml mca/btl mca/coll mca/crcp mca/dpm mca/io mca/mpool mca/mtl  
mca/osc mca/pml mca/pubsub mca/rcache mca/topo mca/common/sm mca/ 
common/mx mca/common/portals  mca/allocator/basic mca/allocator/ 
bucket mca/bml/r2 mca/btl/self mca/btl/sm mca/btl/elan mca/btl/gm  
mca/btl/mx mca/btl/ofud mca/btl/openib mca/btl/portals mca/btl/sctp  
mca/btl/tcp mca/btl/udapl mca/coll/basic mca/coll/hierarch mca/coll/ 
inter mca/coll/self mca/coll/sm mca/coll/tuned mca/crcp/coord mca/ 
dpm/orte mca/io/romio mca/mpool/rdma mca/mpool/sm mca/mtl/mx mca/ 
mtl/portals mca/mtl/psm mca/osc/pt2pt mca/osc/rdma mca/pml/cm mca/ 
pml/ob1 mca/pml/crcpw mca/pml/dr mca/pml/v mca/pubsub/orte mca/ 
rcache/vma mca/topo/unity contrib/vt tools/ompi_info tools/wrappers  
tools/ortetools tools/ompi-server'; for subdir in $list; do \

if test "$subdir" = .; then :; else \
  test -d "/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/ 
create-r19043/ompi/openmpi-1.4a1r19043/ompi/$subdir" \
  || /bin/mkdir -p "/home/mpiteam/openmpi/nightly-tarball-build- 
root/trunk/create-r19043/ompi/openmpi-1.4a1r19043/ompi/$subdir" \

  || exit 1; \
  distdir=`CDPATH="${ZSH_VERSION+.}:" && cd /home/mpiteam/openmpi/ 
nightly-tarball-build-root/trunk/create-r19043/ompi/ 
openmpi-1.4a1r19043/ompi && pwd`; \
  top_distdir=`CDPATH="${ZSH_VERSION+.}:" && cd /home/mpiteam/ 
openmpi/nightly-tarball-build-root/trunk/create-r19043/ompi/ 
openmpi-1.4a1r19043 && pwd`; \

  (cd $subdir && \
make  \
  top_distdir="$top_distdir" \
  distdir="$distdir/$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
  distdir) \
|| exit 1; \
fi; \
done
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/ompi/include'
cd ../.. && /bin/sh /home/mpiteam/openmpi/nightly-tarball-build- 
root/trunk/create-r19043/ompi/config/missing --run autoheader

rm -f stamp-h3
touch ompi_config.h.in
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/ompi/include'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball-

Re: [OMPI devel] === CREATE FAILURE ===

2008-07-25 Thread Jeff Squyres


I can find no reason why this failed.  :-(

I can manually run "make dist" on the v1.3 tree successfully, and  
there weren't any changes to 1.3 mpi/Makefile.am in the last 24 hours.


Did eddie run out of disk space or something?



On Jul 25, 2008, at 9:32 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status
  make distcheck

Start time: Fri Jul 25 21:25:23 EDT 2008
End time:   Fri Jul 25 21:32:33 EDT 2008

= 
==

[... previous lines snipped ...]
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-checkpoint'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-checkpoint'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-clean'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-clean'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-ps'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-ps'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-restart'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orte-restart'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orted'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orted'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orterun'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/orterun'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/wrappers'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte/tools/wrappers'
make[1]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/orte'
make[1]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/ompi'
list='include datatype debuggers etc mpi mca/common  mca/allocator  
mca/bml mca/btl mca/coll mca/crcp mca/dpm mca/io mca/mpool mca/mtl  
mca/osc mca/pml mca/pubsub mca/rcache mca/topo mca/common/sm mca/ 
common/mx mca/common/portals  mca/allocator/basic mca/allocator/ 
bucket mca/bml/r2 mca/btl/self mca/btl/sm mca/btl/elan mca/btl/gm  
mca/btl/mx mca/btl/ofud mca/btl/openib mca/btl/portals mca/btl/sctp  
mca/btl/tcp mca/btl/udapl mca/coll/basic mca/coll/hierarch mca/coll/ 
inter mca/coll/self mca/coll/sm mca/coll/tuned mca/crcp/coord mca/ 
dpm/orte mca/io/romio mca/mpool/rdma mca/mpool/sm mca/mtl/mx mca/mtl/ 
portals mca/mtl/psm mca/osc/pt2pt mca/osc/rdma mca/pml/cm mca/pml/ 
ob1 mca/pml/crcpw mca/pml/dr mca/pml/v mca/pubsub/orte mca/rcache/ 
vma mca/topo/unity contrib/vt tools/ompi_info tools/wrappers tools/ 
ortetools tools/ompi-server'; for subdir in $list; do \

 if test "$subdir" = .; then :; else \
   test -d "/home/mpiteam/openmpi/nightly-tarball-build-root/trunk/ 
create-r19043/ompi/openmpi-1.4a1r19043/ompi/$subdir" \
   || /bin/mkdir -p "/home/mpiteam/openmpi/nightly-tarball-build- 
root/trunk/create-r19043/ompi/openmpi-1.4a1r19043/ompi/$subdir" \

   || exit 1; \
   distdir=`CDPATH="${ZSH_VERSION+.}:" && cd /home/mpiteam/openmpi/ 
nightly-tarball-build-root/trunk/create-r19043/ompi/ 
openmpi-1.4a1r19043/ompi && pwd`; \
   top_distdir=`CDPATH="${ZSH_VERSION+.}:" && cd /home/mpiteam/ 
openmpi/nightly-tarball-build-root/trunk/create-r19043/ompi/ 
openmpi-1.4a1r19043 && pwd`; \

   (cd $subdir && \
 make  \
   top_distdir="$top_distdir" \
   distdir="$distdir/$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
   distdir) \
 || exit 1; \
 fi; \
done
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/ompi/include'
cd ../.. && /bin/sh /home/mpiteam/openmpi/nightly-tarball-build-root/ 
trunk/create-r19043/ompi/config/missing --run autoheader

rm -f stamp-h3
touch ompi_config.h.in
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/ompi/include'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/ompi/datatype'
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r19043/ompi/ompi/datatype'
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball-

Re: [OMPI devel] === CREATE FAILURE ===

2008-07-11 Thread Jeff Squyres


I can find no reason that this failed.  :-\

I am unable to duplicate the problem, and this area of code has not  
changed in a while -- I don't know why plpa/src/plpa-taskset/parser.c  
would suddenly be left behind.




On Jul 10, 2008, at 9:24 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status
  make distcheck

Start time: Thu Jul 10 21:00:14 EDT 2008
End time:   Thu Jul 10 21:24:55 EDT 2008

= 
==

[... previous lines snipped ...]
test -z "" || rm -f
rm -f class/.deps/.dirstamp
rm -f class/.dirstamp
rm -f dss/.deps/.dirstamp
rm -f dss/.dirstamp
rm -f memoryhooks/.deps/.dirstamp
rm -f memoryhooks/.dirstamp
rm -f runtime/.deps/.dirstamp
rm -f runtime/.dirstamp
rm -f threads/.deps/.dirstamp
rm -f threads/.dirstamp
rm -f win32/.deps/.dirstamp
rm -f win32/.dirstamp
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/v1.3/create-r18869/ompi/openmpi-1.3a1r18869/_build/opal'
rm -rf class/.deps dss/.deps memoryhooks/.deps runtime/.deps  
threads/.deps win32/.deps

rm -f Makefile
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/v1.3/create-r18869/ompi/openmpi-1.3a1r18869/_build/opal'

Making distclean in contrib
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/v1.3/create-r18869/ompi/openmpi-1.3a1r18869/_build/contrib'

test -z "*~ .#*" || rm -f *~ .#*
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/v1.3/create-r18869/ompi/openmpi-1.3a1r18869/_build/contrib'

Making distclean in config
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/v1.3/create-r18869/ompi/openmpi-1.3a1r18869/_build/config'

test -z "*~ .#*" || rm -f *~ .#*
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/v1.3/create-r18869/ompi/openmpi-1.3a1r18869/_build/config'

Making distclean in .
make[2]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/v1.3/create-r18869/ompi/openmpi-1.3a1r18869/_build'

test -z "*~ .#*" || rm -f *~ .#*
rm -rf .libs _libs
rm -f *.lo
test -z "ompi/include/ompi/version.h orte/include/orte/version.h  
opal/include/opal/version.h" || rm -f ompi/include/ompi/version.h  
orte/include/orte/version.h opal/include/opal/version.h

rm -f libtool
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[2]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/v1.3/create-r18869/ompi/openmpi-1.3a1r18869/_build'
rm -f config.status config.cache config.log configure.lineno  
config.status.lineno

rm -f Makefile
ERROR: files left in build directory after distclean:
./opal/mca/paffinity/linux/plpa/src/plpa-taskset/parser.c
make[1]: *** [distcleancheck] Error 1
make[1]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/v1.3/create-r18869/ompi/openmpi-1.3a1r18869/_build'

make: *** [distcheck] Error 2
= 
==


Your friendly daemon,
Cyrador
___
testing mailing list
test...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/testing



--
Jeff Squyres
Cisco Systems

Re: [OMPI devel] === CREATE FAILURE ===

2007-12-22 Thread George Bosilca


Corrected by r17023. It's was just a typo.

  Thanks,
george.

On Dec 21, 2007, at 9:17 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status
  make -j 4 distcheck

Start time: Fri Dec 21 21:00:09 EST 2007
End time:   Fri Dec 21 21:17:49 EST 2007

=
==
[... previous lines snipped ...]
   - 5 threads: Passed
   - 8 threads: Passed
PASS: atomic_cmpset_noinline
==
All 8 tests passed
==
make[4]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r17022/ompi/openmpi-1.3a1r17022/_build/test/ 
asm'
make[3]: Leaving directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r17022/ompi/openmpi-1.3a1r17022/_build/test/ 
asm'

Making check in class
make[3]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r17022/ompi/openmpi-1.3a1r17022/_build/test/ 
class'
make  ompi_bitmap opal_hash_table opal_list opal_value_array  
opal_pointer_array ompi_rb_tree
make[4]: Entering directory `/home/mpiteam/openmpi/nightly-tarball- 
build-root/trunk/create-r17022/ompi/openmpi-1.3a1r17022/_build/test/ 
class'

depbase=`echo ompi_bitmap.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\
gcc -DHAVE_CONFIG_H -I. -I../../opal/include -I../../orte/include - 
I../../ompi/include -I../../opal/mca/paffinity/linux/plpa/src/ 
libplpa -I../../../test/class  "-I../../../test/support" -I../../.. - 
I../.. -I../../../opal/include -I../../../orte/include -I../../../ 
ompi/include-O3 -DNDEBUG -finline-functions -fno-strict-aliasing  
-pthread -MT ompi_bitmap.o -MD -MP -MF $depbase.Tpo -c -o  
ompi_bitmap.o ../../../test/class/ompi_bitmap.c &&\

mv -f $depbase.Tpo $depbase.Po
depbase=`echo opal_hash_table.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\
gcc -DHAVE_CONFIG_H -I. -I../../opal/include -I../../orte/include - 
I../../ompi/include -I../../opal/mca/paffinity/linux/plpa/src/ 
libplpa -I../../../test/class  "-I../../../test/support" -I../../.. - 
I../.. -I../../../opal/include -I../../../orte/include -I../../../ 
ompi/include-O3 -DNDEBUG -finline-functions -fno-strict-aliasing  
-pthread -MT opal_hash_table.o -MD -MP -MF $depbase.Tpo -c -o  
opal_hash_table.o ../../../test/class/opal_hash_table.c &&\

mv -f $depbase.Tpo $depbase.Po
depbase=`echo opal_list.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\
gcc -DHAVE_CONFIG_H -I. -I../../opal/include -I../../orte/include - 
I../../ompi/include -I../../opal/mca/paffinity/linux/plpa/src/ 
libplpa -I../../../test/class  "-I../../../test/support" -I../../.. - 
I../.. -I../../../opal/include -I../../../orte/include -I../../../ 
ompi/include-O3 -DNDEBUG -finline-functions -fno-strict-aliasing  
-pthread -MT opal_list.o -MD -MP -MF $depbase.Tpo -c -o  
opal_list.o ../../../test/class/opal_list.c &&\

mv -f $depbase.Tpo $depbase.Po
depbase=`echo opal_value_array.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\
gcc -DHAVE_CONFIG_H -I. -I../../opal/include -I../../orte/include - 
I../../ompi/include -I../../opal/mca/paffinity/linux/plpa/src/ 
libplpa -I../../../test/class  "-I../../../test/support" -I../../.. - 
I../.. -I../../../opal/include -I../../../orte/include -I../../../ 
ompi/include-O3 -DNDEBUG -finline-functions -fno-strict-aliasing  
-pthread -MT opal_value_array.o -MD -MP -MF $depbase.Tpo -c -o  
opal_value_array.o ../../../test/class/opal_value_array.c &&\

mv -f $depbase.Tpo $depbase.Po
depbase=`echo opal_pointer_array.o | sed 's|[^/]*$|.deps/&|;s|\.o 
$||'`;\
gcc -DHAVE_CONFIG_H -I. -I../../opal/include -I../../orte/include - 
I../../ompi/include -I../../opal/mca/paffinity/linux/plpa/src/ 
libplpa -I../../../test/class  "-I../../../test/support" -I../../.. - 
I../.. -I../../../opal/include -I../../../orte/include -I../../../ 
ompi/include-O3 -DNDEBUG -finline-functions -fno-strict-aliasing  
-pthread -MT opal_pointer_array.o -MD -MP -MF $depbase.Tpo -c -o  
opal_pointer_array.o ../../../test/class/opal_pointer_array.c &&\

mv -f $depbase.Tpo $depbase.Po
depbase=`echo ompi_rb_tree.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\
gcc -DHAVE_CONFIG_H -I. -I../../opal/include -I../../orte/include - 
I../../ompi/include -I../../opal/mca/paffinity/linux/plpa/src/ 
libplpa -I../../../test/class  "-I../../../test/support" -I../../.. - 
I../.. -I../../../opal/include -I../../../orte/include -I../../../ 
ompi/include-O3 -DNDEBUG -finline-functions -fno-strict-aliasing  
-pthread -MT ompi_rb_tree.o -MD -MP -MF $depbase.Tpo -c -o  
ompi_rb_tree.o ../../../test/class/ompi_rb_tree.c &&\

mv -f $depbase.Tpo $depbase.Po
/bin/sh ../../libtool --tag=CC   --mode=link gcc  -O3 -DNDEBUG - 
finline-functions -fno-strict-aliasing -pthread  -export-dynamic   - 
o opal_hash_table opal_hash_table.o ../../opal/libopen-pal.la ../../ 
test/support/libsupport.a -lnsl -lutil  -lm
../../../test/class/opal_pointer_array.c:32:43: ompi/class/ 
opal_pointer_array.h: No such file or directory

../../../test/class/opal_pointer_array.c: In

Re: [OMPI devel] === CREATE FAILURE ===

2007-12-07 Thread Jeff Squyres

It's not an issue of compilation; it's an issue of what files make it  
into the tarball when "make dist" is invoked.  In this case, the  
request_default.h wasn't listed in the Makefile.am and therefore was  
not put into the tarball.  Hence, when building from a tarball,  
that .h file was missing.



On Dec 7, 2007, at 4:18 AM, Aurelien Bouteiller wrote:


Herk, sorry about that. It did compile fine on my machine without
adding the .h file to the makefile. I should have though about it.

Aurelien
Le 6 déc. 07 à 21:44, Tim Mattox a écrit :


Thanks George.  I've started a new trunk tarball creation.
It should finish before MTT runs start tonight.  I hope.

On Dec 6, 2007 9:29 PM, George Bosilca  wrote:

Fixed by r16884.

 george.


On Dec 7, 2007, at 12:46 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status
make -j 4 distcheck

Start time: Thu Dec  6 21:00:25 EST 2007
End time:   Thu Dec  6 21:16:34 EST 2007

=
=
=
= 
===

[... previous lines snipped ...]
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I.
-I../opal/include -I../orte/include -I../ompi/include -I../opal/ 
mca/

paffinity/linux/plpa/src/libplpa -I../../ompi   -I../.. -I.. -
I../../
opal/include -I../../orte/include -I../../ompi/include-O3 -
DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT proc/
proc.lo -MD -MP -MF $depbase.Tpo -c -o proc/proc.lo ../../ompi/ 
proc/

proc.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/
src/libplpa -I../../ompi -I../.. -I.. -I../../opal/include -I../../
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions -
fno-strict-aliasing -pthread -MT op/op_predefined.lo -MD -MP -MF
op/.deps/op_predefined.Tpo -c ../../ompi/op/op_predefined.c  - 
fPIC -

DPIC -o op/.libs/op_predefined.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/
src/libplpa -I../../ompi -I../.. -I.. -I../../opal/include -I../../
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions -
fno-strict-aliasing -pthread -MT proc/proc.lo -MD -MP -MF
proc/.deps/
proc.Tpo -c ../../ompi/proc/proc.c  -fPIC -DPIC -o proc/.libs/ 
proc.o

depbase=`echo request/grequest.lo | sed 's|[^/]*$|.deps/&|;s|\.lo
$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I.
-I../opal/include -I../orte/include -I../ompi/include -I../opal/ 
mca/

paffinity/linux/plpa/src/libplpa -I../../ompi   -I../.. -I.. -
I../../
opal/include -I../../orte/include -I../../ompi/include-O3 -
DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT
request/
grequest.lo -MD -MP -MF $depbase.Tpo -c -o request/
grequest.lo ../../
ompi/request/grequest.c &&\
mv -f $depbase.Tpo $depbase.Plo
depbase=`echo request/request.lo | sed 's|[^/]*$|.deps/&|;s|\.lo
$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I.
-I../opal/include -I../orte/include -I../ompi/include -I../opal/ 
mca/

paffinity/linux/plpa/src/libplpa -I../../ompi   -I../.. -I.. -
I../../
opal/include -I../../orte/include -I../../ompi/include-O3 -
DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT
request/
request.lo -MD -MP -MF $depbase.Tpo -c -o request/request.lo ../../
ompi/request/request.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/
src/libplpa -I../../ompi -I../.. -I.. -I../../opal/include -I../../
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions -
fno-strict-aliasing -pthread -MT request/grequest.lo -MD -MP -MF
request/.deps/grequest.Tpo -c ../../ompi/request/grequest.c  - 
fPIC -

DPIC -o request/.libs/grequest.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/
src/libplpa -I../../ompi -I../.. -I.. -I../../opal/include -I../../
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions -
fno-strict-aliasing -pthread -MT request/request.lo -MD -MP -MF
request/.deps/request.Tpo -c ../../ompi/request/request.c  -fPIC -
DPIC -o request/.libs/request.o
depbase=`echo request/req_test.lo | sed 's|[^/]*$|.deps/&|;s|\.lo
$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I.
-I../opal/include -I../orte/include -I../ompi/include -I../opal/ 
mca/

paffinity/linux/plpa/src/libplpa -I../../ompi   -I../.. -I.. -
I../../
opal/include -I../../orte/include -I../../ompi/include-O3 -
DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT
request/
req_test.lo -MD -MP -MF $depbase.Tpo -c -o request/
req_test.lo ../../
ompi/request/req_test.c &&\
mv -f $depbase.Tpo $depbase.Plo
../../ompi/request/request.c:24:42: ompi/request/request_default.h:
No such

Re: [OMPI devel] === CREATE FAILURE ===

2007-12-06 Thread George Bosilca


Fixed by r16884.

  george.

On Dec 7, 2007, at 12:46 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status
  make -j 4 distcheck

Start time: Thu Dec  6 21:00:25 EST 2007
End time:   Thu Dec  6 21:16:34 EST 2007

=
==
[... previous lines snipped ...]
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  
-I../opal/include -I../orte/include -I../ompi/include -I../opal/mca/ 
paffinity/linux/plpa/src/libplpa -I../../ompi   -I../.. -I.. -I../../ 
opal/include -I../../orte/include -I../../ompi/include-O3 - 
DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT proc/ 
proc.lo -MD -MP -MF $depbase.Tpo -c -o proc/proc.lo ../../ompi/proc/ 
proc.c &&\

mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../ 
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/ 
src/libplpa -I../../ompi -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -MT op/op_predefined.lo -MD -MP -MF  
op/.deps/op_predefined.Tpo -c ../../ompi/op/op_predefined.c  -fPIC - 
DPIC -o op/.libs/op_predefined.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../ 
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/ 
src/libplpa -I../../ompi -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -MT proc/proc.lo -MD -MP -MF proc/.deps/ 
proc.Tpo -c ../../ompi/proc/proc.c  -fPIC -DPIC -o proc/.libs/proc.o
depbase=`echo request/grequest.lo | sed 's|[^/]*$|.deps/&|;s|\.lo 
$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  
-I../opal/include -I../orte/include -I../ompi/include -I../opal/mca/ 
paffinity/linux/plpa/src/libplpa -I../../ompi   -I../.. -I.. -I../../ 
opal/include -I../../orte/include -I../../ompi/include-O3 - 
DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT request/ 
grequest.lo -MD -MP -MF $depbase.Tpo -c -o request/grequest.lo ../../ 
ompi/request/grequest.c &&\

mv -f $depbase.Tpo $depbase.Plo
depbase=`echo request/request.lo | sed 's|[^/]*$|.deps/&|;s|\.lo 
$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  
-I../opal/include -I../orte/include -I../ompi/include -I../opal/mca/ 
paffinity/linux/plpa/src/libplpa -I../../ompi   -I../.. -I.. -I../../ 
opal/include -I../../orte/include -I../../ompi/include-O3 - 
DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT request/ 
request.lo -MD -MP -MF $depbase.Tpo -c -o request/request.lo ../../ 
ompi/request/request.c &&\

mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../ 
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/ 
src/libplpa -I../../ompi -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -MT request/grequest.lo -MD -MP -MF  
request/.deps/grequest.Tpo -c ../../ompi/request/grequest.c  -fPIC - 
DPIC -o request/.libs/grequest.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../ 
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/ 
src/libplpa -I../../ompi -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -MT request/request.lo -MD -MP -MF  
request/.deps/request.Tpo -c ../../ompi/request/request.c  -fPIC - 
DPIC -o request/.libs/request.o
depbase=`echo request/req_test.lo | sed 's|[^/]*$|.deps/&|;s|\.lo 
$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  
-I../opal/include -I../orte/include -I../ompi/include -I../opal/mca/ 
paffinity/linux/plpa/src/libplpa -I../../ompi   -I../.. -I.. -I../../ 
opal/include -I../../orte/include -I../../ompi/include-O3 - 
DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT request/ 
req_test.lo -MD -MP -MF $depbase.Tpo -c -o request/req_test.lo ../../ 
ompi/request/req_test.c &&\

mv -f $depbase.Tpo $depbase.Plo
../../ompi/request/request.c:24:42: ompi/request/request_default.h:  
No such file or directory
../../ompi/request/request.c:36: error: `ompi_request_default_test'  
undeclared here (not in a function)
../../ompi/request/request.c:36: error: initializer element is not  
constant
../../ompi/request/request.c:36: error: (near initialization for  
`ompi_request_functions.req_test')
../../ompi/request/request.c:37: error:  
`ompi_request_default_test_any' undeclared here (not in a function)
../../ompi/request/request.c:37: error: initializer element is not  
constant
../../ompi/request/request.c:37: error: (near initialization for  
`ompi_request_functions.req_test_any')
../../ompi/request/request.c:38: error:  
`ompi_request_default_test_all' undeclared here (not in a function)

Re: [OMPI devel] === CREATE FAILURE ===

2007-11-19 Thread Jeff Squyres

This patch will fix the problem -- the OMPI_VAR_SCOPE stuff didn't  
make it over to the v1.2 branch:


Index: config/ompi_config_asm.m4
===
--- config/ompi_config_asm.m4   (revision 16740)
+++ config/ompi_config_asm.m4   (working copy)
@@ -801,7 +801,6 @@
 # OS X Leopard ld bus errors if you have "-g" in the link line
 # with our assembly (!).  So remove it from CCASFLAGS if it's
 # there (and we're on Leopard).
-OMPI_VAR_SCOPE_PUSH([ompi_config_asm_flags_new  
ompi_config_asm_flag])

 AC_MSG_CHECKING([if need to remove -g from CCASFLAGS])
 case "$host" in
 *-apple-darwin9.0*)
@@ -817,7 +816,7 @@
 AC_MSG_RESULT([no])
 ;;
 esac
-OMPI_VAR_SCOPE_POP
+unset ompi_config_asm_flags_new ompi_config_asm_flag

 AC_MSG_CHECKING([whether to enable smp locks])
 AC_ARG_ENABLE([smp-locks],



On Nov 19, 2007, at 9:05 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status
  ./configure --enable-dist

Start time: Mon Nov 19 21:00:11 EST 2007
End time:   Mon Nov 19 21:05:13 EST 2007

= 
==

[... previous lines snipped ...]
checking size of ssize_t... 4
checking for ptrdiff_t... (cached) yes
checking size of ptrdiff_t... 4
checking alignment of char... 1
checking alignment of short... 2
checking alignment of wchar_t... 4
checking alignment of int... 4
checking alignment of long... 4
checking alignment of long long... 4
checking alignment of float... 4
checking alignment of double... 4
checking alignment of long double... 4
checking alignment of void *... 4
checking for C bool type... no
checking for inline... __inline__
checking for C/C++ restrict keyword... __restrict
checking for weak symbol support... yes

*** C++ compiler and preprocessor
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for the C++ compiler vendor... gnu
checking if C++ compiler works... yes
configure: WARNING: -g has been added to CXXFLAGS (--enable-debug)
checking if g++ supports -Wno-long-double... no
configure: WARNING: -Wall -Wundef -Wno-long-long has been added to  
CXXFLAGS (--enable-picky)

checking if g++ supports -finline-functions... yes
configure: WARNING:  -finline-functions has been added to CXXFLAGS
checking if want C++ exception handling... no
checking if C and C++ are link compatible... yes
checking for C++ template_repository_directory... not used
checking for C++ compiler template parameters... none needed
checking if g++ supports __builtin_expect... yes
checking if g++ supports __builtin_prefetch... yes
checking if g++ supports const_cast<> properly... yes
checking for C++ optimization flags... -g -Wall -Wundef -Wno-long- 
long -finline-functions

checking for bool... yes
checking size of bool... 1
checking alignment of bool... 1

*** Assembler
checking dependency style of gcc... gcc3
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking for fgrep... /bin/grep -F
./configure: line 24662: syntax error near unexpected token  
`ompi_config_asm_flags_new'
./configure: line 24662: ` 
OMPI_VAR_SCOPE_PUSH(ompi_config_asm_flags_new ompi_config_asm_flag)'
= 
==


Your friendly daemon,
Cyrador
___
testing mailing list
test...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/testing



--
Jeff Squyres
Cisco Systems

Re: [OMPI devel] === CREATE FAILURE ===

2007-11-09 Thread Josh Hursey


Sorry about this. I fixed the problem in r16706.

It seems that an old version of BLCR is installed in the default path  
on the IU machine that builds the Open MPI tarballs. This has not  
been a problem in the past since I have not been using any new  
features of BLCR. Since I am starting to use some of this new  
functionality the IU machine was not able to find the right symbols  
and died. I implemented some configure checks to work around this.


Sorry again,
Josh

On Nov 8, 2007, at 9:13 PM, MPI Team wrote:



ERROR: Command returned a non-zero exist status
   make -j 4 distcheck

Start time: Thu Nov  8 21:00:26 EST 2007
End time:   Thu Nov  8 21:13:07 EST 2007

== 
=

[... previous lines snipped ...]
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I. -I../opal/include -I../orte/include -I../ompi/include -I../opal/ 
mca/paffinity/linux/plpa/src/libplpa -I../../opal   -I../.. -I.. - 
I../../opal/include -I../../orte/include -I../../ompi/include- 
O3 -DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT  
threads/condition.lo -MD -MP -MF $depbase.Tpo -c -o threads/ 
condition.lo ../../opal/threads/condition.c &&\

mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../ 
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/ 
src/libplpa -I../../opal -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -MT runtime/opal_params.lo -MD -MP -MF  
runtime/.deps/opal_params.Tpo -c ../../opal/runtime/opal_params.c  - 
fPIC -DPIC -o runtime/.libs/opal_params.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../ 
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/ 
src/libplpa -I../../opal -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -MT runtime/opal_cr.lo -MD -MP -MF  
runtime/.deps/opal_cr.Tpo -c ../../opal/runtime/opal_cr.c  -fPIC - 
DPIC -o runtime/.libs/opal_cr.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../ 
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/ 
src/libplpa -I../../opal -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -MT threads/condition.lo -MD -MP -MF  
threads/.deps/condition.Tpo -c ../../opal/threads/condition.c  - 
fPIC -DPIC -o threads/.libs/condition.o

depbase=`echo threads/mutex.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I. -I../opal/include -I../orte/include -I../ompi/include -I../opal/ 
mca/paffinity/linux/plpa/src/libplpa -I../../opal   -I../.. -I.. - 
I../../opal/include -I../../orte/include -I../../ompi/include- 
O3 -DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT  
threads/mutex.lo -MD -MP -MF $depbase.Tpo -c -o threads/ 
mutex.lo ../../opal/threads/mutex.c &&\

mv -f $depbase.Tpo $depbase.Plo
depbase=`echo threads/thread.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I. -I../opal/include -I../orte/include -I../ompi/include -I../opal/ 
mca/paffinity/linux/plpa/src/libplpa -I../../opal   -I../.. -I.. - 
I../../opal/include -I../../orte/include -I../../ompi/include- 
O3 -DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT  
threads/thread.lo -MD -MP -MF $depbase.Tpo -c -o threads/ 
thread.lo ../../opal/threads/thread.c &&\

mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../ 
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/ 
src/libplpa -I../../opal -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -MT threads/mutex.lo -MD -MP -MF  
threads/.deps/mutex.Tpo -c ../../opal/threads/mutex.c  -fPIC -DPIC - 
o threads/.libs/mutex.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../opal/include -I../ 
orte/include -I../ompi/include -I../opal/mca/paffinity/linux/plpa/ 
src/libplpa -I../../opal -I../.. -I.. -I../../opal/include -I../../ 
orte/include -I../../ompi/include -O3 -DNDEBUG -finline-functions - 
fno-strict-aliasing -pthread -MT threads/thread.lo -MD -MP -MF  
threads/.deps/thread.Tpo -c ../../opal/threads/thread.c  -fPIC - 
DPIC -o threads/.libs/thread.o

depbase=`echo threads/tsd.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H - 
I. -I../opal/include -I../orte/include -I../ompi/include -I../opal/ 
mca/paffinity/linux/plpa/src/libplpa -I../../opal   -I../.. -I.. - 
I../../opal/include -I../../orte/include -I../../ompi/include- 
O3 -DNDEBUG -finline-functions -fno-strict-aliasing -pthread -MT  
threads/tsd.lo

40 matches

Mail list logo