Hello Niteesh,
thanks for your work. I tested the patches. I agree that it works on Pi
1 and 2. Id doesn't work for me on Pi 3 (Model B V1.2) or 4. But with
Alans test reports there is positive feedback for some additional Pis.
It's no regression for 1 and 2 so I pushed it.
Best regards
Christia
Can someone please push these patches?
Thanks,
Niteesh
On Sun, Feb 16, 2020 at 11:05 PM Alan Cudmore
wrote:
> Awesome! The Pi Zero W is a bonus too! I think we can run RTEMS on all
> models except the Pi 4 now.
>
> On Sun, Feb 16, 2020 at 12:30 PM G. S. Niteesh wrote:
> >
> > Hii Alan,
> >
> >
Awesome! The Pi Zero W is a bonus too! I think we can run RTEMS on all
models except the Pi 4 now.
On Sun, Feb 16, 2020 at 12:30 PM G. S. Niteesh wrote:
>
> Hii Alan,
>
> I tested it on my Raspberry Pi 3 model b v1.2 and it works.
> U-Boot is not required anymore :)
>
> Thanks,
> Niteesh.
>
> On
Hii Alan,
I tested it on my Raspberry Pi 3 model b v1.2 and it works.
U-Boot is not required anymore :)
Thanks,
Niteesh.
On Sun, Feb 16, 2020 at 10:51 PM Alan Cudmore
wrote:
> I'm definitely using the kernel_address, but letting the firmware
> decide what image to boot. For me kernel.img is th
I'm definitely using the kernel_address, but letting the firmware
decide what image to boot. For me kernel.img is the single core ARM
images. kernel7.img is used for the raspberry pi 2 and 3. With these
names, I can have both images on the same SD card to test in all of my
Pis.
my config.txt:
ena
On 16/02/2020 17:31, G. S. Niteesh wrote:
> Can you please share your config.txt for Pi3.
+1
It's interesting that it seems to work without an adapted config.txt. It
should be at least necessary to define the start address.
>
> Thanks,
> Niteesh
>
> On Sun, Feb 16, 2020 at 9:58 PM Alan Cudmore
Can you please share your config.txt for Pi3.
Thanks,
Niteesh
On Sun, Feb 16, 2020 at 9:58 PM Alan Cudmore wrote:
> I tried running my raspberrypi BSP image that worked on the Pi Zero
> and W, but it did not work on the Pi 3.
>
> I built the raspberrypi2 BSP, used objcopy to copy the binary to
I tried running my raspberrypi BSP image that worked on the Pi Zero
and W, but it did not work on the Pi 3.
I built the raspberrypi2 BSP, used objcopy to copy the binary to my sd
card as kernel7.img, and it works on my Pi 3 and Pi3 A+ ( without
ethernet) . Note that my config.txt file does not spe
On Sun, Feb 16, 2020 at 8:37 PM Alan Cudmore wrote:
> Hi Niteesh,
> I can try this patch on my Pi 3. Which BSP should I use? Is there any
> special setup or BSP configuration needed?
> Thanks,
> Alan
>
Hi Alan,
First of all, thank you for taking this initiative.
I have tried using the default boo
Hi Niteesh,
I can try this patch on my Pi 3. Which BSP should I use? Is there any
special setup or BSP configuration needed?
Thanks,
Alan
On Sun, Feb 16, 2020 at 2:35 AM G. S. Niteesh wrote:
>
> Hii,
> This is a reminder message since this patch has been unnoticed for a while.
> I have tested it
Hii,
This is a reminder message since this patch has been unnoticed for a while.
I have tested it on Raspberry Pi 3 and it works fine. There is also another
patch
https://lists.rtems.org/pipermail/devel/2020-February/057194.html, please
do have a look at these.
Thank you.
Niteesh
On Mon, Feb 10, 2
This patch adds driver for Mini UART present in Raspberry Pi 3
and above, this UART is currently used as the primary UART in
these models.
The Mini UART is similar to ns16550, this driver is built
upon libchip/ns16550.
---
bsps/arm/raspberrypi/console/console-config.c | 118 --
bsp
12 matches
Mail list logo