Hi,
Thanks for your comments :)
On Sat, 25 Apr 2015 13:50:25 +0100
Charles Keepax wrote:
> On Wed, Apr 22, 2015 at 08:23:20PM +0900, Inha Song wrote:
> > This patch add support for select accessory detect mode to HPDETL or HPDETR.
> > Arizona provides a headphone detection
This patch add device tree bindings for the pdata needed to configure
the Accessory Detect Mode select when Headphone detection.
Signed-off-by: Inha Song
---
Documentation/devicetree/bindings/mfd/arizona.txt | 6 ++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree
or HPDETL.
Signed-off-by: Inha Song
---
drivers/extcon/extcon-arizona.c | 38 ++
include/dt-bindings/mfd/arizona.h | 8
include/linux/mfd/arizona/pdata.h | 3 +++
3 files changed, 41 insertions(+), 8 deletions(-)
create mode 100644 include/dt
arizona_extcon_of_get in IS_ENABLED(CONFIG_OF).
- Change hpdet_channel type to unsigned from signed in pdata.
- Move ARIZONA_ACCDET_MODE_* define to dt-binding header and directly set it
to pdata.
Inha Song (2):
extcon: arizona: Add support for select accessory detect mode when
headphone detection
Hi,
Thanks for your review :)
On Tue, 21 Apr 2015 10:28:26 +0100
Charles Keepax wrote:
> On Tue, Apr 21, 2015 at 01:11:44PM +0900, Inha Song wrote:
> > This patch add support for select accessory detect mode to HPDETL or HPDETR.
> > Arizona provides a headphone detection circui
.
- Move ARIZONA_ACCDET_MODE_* define to dt-binding header and directly set it
to pdata.
Inha Song (2):
extcon: arizona: Add support for select accessory detect mode when
headphone detection
mfd: arizona: Update DT binding to support hpdet channel
Documentation/devicetree/bindings/mfd
or HPDETL.
Signed-off-by: Inha Song
---
drivers/extcon/extcon-arizona.c | 28
include/dt-bindings/mfd/arizona.h | 8
include/linux/mfd/arizona/pdata.h | 3 +++
3 files changed, 31 insertions(+), 8 deletions(-)
create mode 100644 include/dt-bindings/mfd
This patch add device tree bindings for the pdata needed to configure
the Accessory Detect Mode select when Headphone detection.
Signed-off-by: Inha Song
---
Documentation/devicetree/bindings/mfd/arizona.txt | 6 ++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree
Hi,
Thanks for your comments,
On Fri, 17 Apr 2015 10:00:47 +0100
Charles Keepax wrote:
> On Fri, Apr 17, 2015 at 05:32:58PM +0900, Inha Song wrote:
> > This patch add support for select accessory detect mode to HPDETL or HPDETR.
> > Arizona provides a headphone detection circui
or HPDETL.
Signed-off-by: Inha Song
---
drivers/extcon/extcon-arizona.c | 34 ++
include/linux/mfd/arizona/pdata.h | 3 +++
2 files changed, 33 insertions(+), 4 deletions(-)
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index
This set of patches adds support for select accessory detect mode to HPDETL or
HPDETR.
Inha Song (2):
extcon: arizona: Add support for select accessory detect mode when
headphone detection"
mfd: arizona: Update DT binding to support hpdet channel
Documentation/devicetree/binding
This patch add device tree bindings for the pdata needed to configure
the Accessory Detect Mode select when Headphone detection.
Signed-off-by: Inha Song
---
Documentation/devicetree/bindings/mfd/arizona.txt | 4
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree
Add MAX98090 audio codec, I2S interface and the sound nodes to support
audio on Exynos5422 SoC Based Odroid-XU3 board. Now we can support audio
in Odroid-XU3 board using simple-audio-card DT binding.
Signed-off-by: Inha Song
Reviewed-by: Sylwester Nawrocki
---
arch/arm/boot/dts/exynos5420.dtsi
Hi Sylwester,
Thanks for your review.
On Mon, 23 Mar 2015 11:54:55 +0100
Sylwester Nawrocki wrote:
> On 23/03/15 03:51, Inha Song wrote:
> > Add MAX98090 audio codec, I2S interface and the sound nodes to support
> > audio on Exynos5422 SoC Based Odroid-XU3 board. Now we ca
Add MAX98090 audio codec, I2S interface and the sound nodes to support
audio on Exynos5422 SoC Based Odroid-XU3 board. Now we can support audio
in Odroid-XU3 board using simple-audio-card DT binding.
Signed-off-by: Inha Song
---
arch/arm/boot/dts/exynos5420.dtsi | 9 +
arch/arm
Add MAX98090 audio codec, I2S interface and the sound nodes to support
audio on Exynos5422 SoC Based Odroid-XU3 board. Now we can support audio
in Odroid-XU3 board using simple-audio-card DT binding.
Signed-off-by: Inha Song
---
arch/arm/boot/dts/exynos5420.dtsi | 9 +
arch/arm
This patch add the CLKOUT register source clock as xusbxti in
PMU (Power Management Unit) dt node on Exynos3250.
Cc: Kukjin Kim
Signed-off-by: Inha Song
---
arch/arm/boot/dts/exynos3250.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi
b/arch/arm
Hi Kukjin,
Sorry, I missed to adding in Cc.
Best Regards,
Inha Song.
On Fri, 23 Jan 2015 14:03:30 +0900
Inha Song wrote:
> This patch add WM1811 audio codec, I2S interface and the sound
> machine nodes to enable audio on exynos4412-trats2 board.
>
> Signed-off-by: Inha Song
&
This patch add Trats2 audio subsystem bindings document.
Signed-off-by: Inha Song
---
.../bindings/sound/samsung,trats2-wm1811.txt | 25 ++
1 file changed, 25 insertions(+)
create mode 100644
Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt
diff
.
- Remove mclk DT property in Trats2 sound and add MCLK1 property in WM1811
node.
(MCLK1 is optional property in WM8994 node - refer:
Document/devicetree/bindings/sound/wm8994.txt)
- Use mclk that defined in WM1811 DT node.
- Add "samsung,audio-codec" property to required propert
This patch add WM1811 audio codec, I2S interface and the sound
machine nodes to enable audio on exynos4412-trats2 board.
Signed-off-by: Inha Song
---
arch/arm/boot/dts/exynos4412-trats2.dts | 42 +
1 file changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts
This patch add the sound machine driver for Trats2 board.
The codec operate in master mode.
Signed-off-by: Inha Song
---
sound/soc/samsung/Kconfig | 9 ++
sound/soc/samsung/Makefile| 2 +
sound/soc/samsung/trats2_wm1811.c | 211 ++
3 files
Hi,
Thanks for your review.
On Thu, 22 Jan 2015 13:16:03 +0100
Sylwester Nawrocki wrote:
> On 22/01/15 12:17, Inha Song wrote:
> > diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
> > index fc67f97..8031423 100644
> > --- a/sound/soc/samsung/Kconfig
> &
Hi,
Thanks for your comment.
On Thu, 22 Jan 2015 13:25:07 +0100
Sylwester Nawrocki wrote:
> On 22/01/15 12:18, Inha Song wrote:
> > This patch set clock out parent to XUSBXTI.
> >
> > Signed-off-by: Inha Song
> > ---
> > arch/arm/boot/dts/exynos4.dtsi | 2 ++
This patch set clock out parent to XUSBXTI.
Signed-off-by: Inha Song
---
arch/arm/boot/dts/exynos4.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index b8168f1..020bbaf 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b
This patch add the sound machine driver for Trats2 board.
The codec operate in master mode.
Signed-off-by: Inha Song
---
sound/soc/samsung/Kconfig | 8 ++
sound/soc/samsung/Makefile| 2 +
sound/soc/samsung/trats2_wm1811.c | 218 ++
3 files
This patch add WM1811 audio codec, I2S interface and the sound
machine nodes to enable audio on exynos4412-trats2 board.
Signed-off-by: Inha Song
---
arch/arm/boot/dts/exynos4412-trats2.dts | 37 +
1 file changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts
This patch add Trats2 audio subsystem bindings document.
Signed-off-by: Inha Song
---
.../bindings/sound/samsung,trats2-wm1811.txt | 25 ++
1 file changed, 25 insertions(+)
create mode 100644
Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt
diff
"samsung,audio-codec" property to required properties.
Inha Song (4):
ASoC: samsung: Add machine driver for Trats2
ASoC: samsung: Document Trats2 audio subsystem bindings
ARM: dts: set clock out parent to XUSBXTI
ARM: dts: Add sound nodes for exynos4412-trats2
.../bindings/sou
Hi,
Thanks for your comments.
On Wed, 21 Jan 2015 17:23:21 +0100
Sylwester Nawrocki wrote:
> Hi,
>
> On 19/01/15 10:48, Inha Song wrote:
> > --- a/arch/arm/boot/dts/exynos4412-trats2.dts
> > +++ b/arch/arm/boot/dts/exynos4412-trats2.dts
>
> > + sound {
> &g
Hi,
Thanks for your comment.
On Wed, 21 Jan 2015 12:41:55 +0100
Sylwester Nawrocki wrote:
> Hi,
>
> On 21/01/15 06:58, Inha Song wrote:
> > Add MAX98090 audio codec, I2S interface and the sound nodes to support
> > audio on Odroid-XU3 board.
> >
&
Add MAX98090 audio codec, I2S interface and the sound nodes to support
audio on Odroid-XU3 board.
Signed-off-by: Inha Song
---
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 34 ++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3
This patch add the sound machine driver for Trats2 board.
The codec operate in master mode.
Signed-off-by: Inha Song
---
sound/soc/samsung/Kconfig | 8 ++
sound/soc/samsung/Makefile| 2 +
sound/soc/samsung/trats2_wm1811.c | 218 ++
3 files
This patch add WM1811 audio codec, I2S interface and the sound
machine nodes to enable audio on exynos4412-trats2 board.
Signed-off-by: Inha Song
---
arch/arm/boot/dts/exynos4412-trats2.dts | 39 +
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts
property in Trats2 sound and add MCLK1 property in WM1811
node.
(MCLK1 is optional property in WM8994 node - refer:
Document/devicetree/bindings/sound/wm8994.txt)
- Use mclk that defined in WM1811 DT node.
- Add "samsung,audio-codec" property to required properties.
Inha Song (
This patch add Trats2 audio subsystem bindings document.
Signed-off-by: Inha Song
---
.../bindings/sound/samsung,trats2-wm1811.txt | 25 ++
1 file changed, 25 insertions(+)
create mode 100644
Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt
diff
Hi Mark,
Thank you for your feedback and sorry for late response.
I think, I should remove clock settings in machine driver.
If the clock settings are necessary, I will add "assigned-clocks" nodes
in trats2 sound DT like odroid board.
Best Regards,
Inha Song.
> On Mon, Jan 05,
Hi,
Thanks for your comments.
> Hi,
>
> A few small comments inline.
>
> On 01/05/2015 12:25 PM, Inha Song wrote:
> > --- /dev/null
> > +++ b/sound/soc/samsung/trats2_wm1811.c
> > @@ -0,0 +1,216 @@
> >[...]
> > +#include
> > +#i
This patch add the sound machine driver for Trats2 board.
The codec operate in master mode. So, Reference to the
codec master clock must be defined in DT.
Signed-off-by: Inha Song
---
sound/soc/samsung/Kconfig | 8 ++
sound/soc/samsung/Makefile| 2 +
sound/soc/samsung
This patch add Trats2 audio subsystem bindings document.
Signed-off-by: Inha Song
---
.../bindings/sound/samsung,trats2-wm1811.txt | 31 ++
1 file changed, 31 insertions(+)
create mode 100644
Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt
diff
This patch add WM1811 audio codec, I2S interface and the sound
machine nodes to enable audio on exynos4412-trats2 board.
Signed-off-by: Inha Song
---
arch/arm/boot/dts/exynos4412-trats2.dts | 38 +
1 file changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts
This patch-set adds basic sound support for the Trats2 boards.
It just support primary I2s and external speaker playback.
Inha Song (3):
ASoC: samsung: Add machine driver for Trats2
ASoC: samsung: Document Trats2 audio subsystem bindings
ARM: dts: Add sound nodes for exynos4412-trats2
t; instead of "==" in condition check
Inha Song (2):
mfd: arizona: Add support for OUTn_MONO register control
mfd: arizona: Update DT binding to support OUTn_MONO init_data
Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++
drivers/mfd/arizona-core.c
This patch update DT binding to support OUTn_MONO init_data. Each
output signal can be configurated as a mono differential output.
The mono differential configuration is selected using the OUTn_MONO
registers.
Signed-off-by: Inha Song
---
Documentation/devicetree/bindings/mfd/arizona.txt | 7
, elements
that has not been specified are set to 0 by default.
Example:
- wlf,out-mono = <1 0 1>; /* set OUT1,OUT3 to mono differential */
Signed-off-by: Inha Song
---
drivers/mfd/arizona-core.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/drivers/mfd/arizona-core.c b/d
, elements
that has not been specified are set to 0 by default.
Example:
- wlf,out-mono = <1 0 1>; /* set OUT1,OUT3 to mono differential */
Signed-off-by: Inha Song
---
drivers/mfd/arizona-core.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/drivers/mfd/arizona-core.c b/d
This patch update DT binding to support OUTn_MONO init_data. Each
output signal can be configurated as a mono differential output.
The mono differential configuration is selected using the OUTn_MONO
registers.
Signed-off-by: Inha Song
---
Documentation/devicetree/bindings/mfd/arizona.txt | 7
t; instead of "==" in condition check
Inha Song (2):
mfd: arizona: Add support for OUTn_MONO register control
mfd: arizona: Update DT binding to support OUTn_MONO init_data
Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++
drivers/mfd/arizona-core.c
Hi,
Sorry for the late reply.
On Tue, 09 Dec 2014 08:57:17 +
Lee Jones wrote:
> On Mon, 08 Dec 2014, Inha Song wrote:
>
> > Some boards need to set the OUTn_MONO register to configurates
> > the output signal path as a mono differential output. This
> > wlf,out-m
, elements
that has not been specified are set to 0 by default.
Example:
- wlf,out-mono = <1 0 1>; /* set OUT1,OUT3 to mono differential */
Signed-off-by: Inha Song
---
drivers/mfd/arizona-core.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/drivers/mfd/arizona-core.c b/d
This patch series add support for OUTn_MONO register control using platform
data.
Each output signal can be configurated as a mono differential output.
The mono differential configuration is selected using the OUTn_MONO registers.
Inha Song (2):
mfd: arizona: Add support for OUTn_MONO register
This patch update DT binding to support OUTn_MONO init_data. Each
output signal can be configurated as a mono differential output.
The mono differential configuration is selected using the OUTn_MONO
registers.
Signed-off-by: Inha Song
---
Documentation/devicetree/bindings/mfd/arizona.txt | 7
This patch update DT binding to support INn_MODE init_data. Each
input signal path can be configurated either as a Analogue or
Digital using the INn_MODE registers.
Signed-off-by: Inha Song
Reviewed-by: Charles Keepax
---
Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++
1 file
are set
to 0 by default.
Example:
- wlf,inmode = <2 0 2>; /* IN1, IN3 use DMIC */
Signed-off-by: Inha Song
Reviewed-by: Charles Keepax
---
drivers/mfd/arizona-core.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-
clarity
Changes for v3
- Change to use of_property_read_u32_array
- Fix a few typos
- Update commit message
Changes for v2
- Change to support
- Update commit message
- Update document content for more clarity
Inha Song (2):
mfd: arizona: Add support for INn_Mode register control
mfd: arizona
On Fri, 29 Aug 2014 09:17:41 +0100
Lee Jones wrote:
> On Fri, 29 Aug 2014, Inha Song wrote:
>
> > Hi, Lee
> > Thanks for your review.
> >
> > On Thu, 28 Aug 2014 12:36:51 +0100
> > Lee Jones wrote:
> >
> > > On Mon, 18 Aug 2014, Inha Son
Hi, Lee
Thanks for your review.
On Thu, 28 Aug 2014 12:36:51 +0100
Lee Jones wrote:
> On Mon, 18 Aug 2014, Inha Song wrote:
>
> > Some boards need to set the INn_MODE[1:0] register to change
> > the input signal patch. This wlf,inmode property is optional.
> > If
are set
to 0 by default.
Example:
- wlf,inmode = <2 0 2>; /* IN1, IN3 use DMIC */
Signed-off-by: Inha Song
Reviewed-by: Charles Keepax
---
drivers/mfd/arizona-core.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/a
This patch update DT binding to support INn_MODE init_data. Each
input signal path can be configurated either as a Analogue or
Digital using the INn_MODE registers.
Signed-off-by: Inha Song
Reviewed-by: Charles Keepax
---
Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++
1 file
of_property_read_u32_array
- Fix a few typos
- Update commit message
Changes for v2
- Change to support
- Update commit message
- Update document content for more clarity
Inha Song (2):
mfd: arizona: Add support for INn_Mode register control
mfd: arizona: Update DT binding to support INn_MODE init_data
Hi Lee,
On Thu, 21 Aug 2014 13:12:19 +0100
Lee Jones wrote:
> On Wed, 13 Aug 2014, Inha Song wrote:
>
> > Some boards need to set the INn_MODE[1:0] register to change
> > the input signal patch. This wlf,inmode property is optional.
> > If present values must be sp
This patch update DT binding to support INn_MODE init_data. Each
input signal path can be configurated either as a Analogue or
Digital using the INn_MODE registers.
Signed-off-by: Inha Song
---
Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++
1 file changed, 7 insertions(+)
diff
are set
to 0 by default.
Example:
- wlf,inmode = <2 0 2>; /* IN1, IN3 use DMIC */
Signed-off-by: Inha Song
Reviewed-by: Charles Keepax
---
drivers/mfd/arizona-core.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/a
of_property_read_u32_array
- Fix a few typos
- Update commit message
Changes for v2
- Change to support
- Update commit message
- Update document content for more clarity
Inha Song (2):
mfd: arizona: Add support for INn_Mode register control
mfd: arizona: Update DT binding to support INn_MODE init_data
Hi, Charles.
Thanks for your review.
On Mon, 18 Aug 2014 15:29:45 +0100
Charles Keepax wrote:
> On Mon, Aug 18, 2014 at 08:00:09PM +0900, Inha Song wrote:
> > This patch update DT binding to support INn_MODE init_data. Each
> > input signal path can be configurated either a
are set
to 0 by default.
Example:
- wlf,inmode = <2 0 2>; /* IN1, IN3 use DMIC */
Signed-off-by: Inha Song
---
drivers/mfd/arizona-core.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 1
for v2
- Change to support
- Update commit message
- Update document content for more clarity
Inha Song (2):
mfd: arizona: Add support for INn_Mode register control
mfd: arizona: Update DT binding to support INn_MODE init_data
Documentation/devicetree/bindings/mfd/arizona.txt | 8
This patch update DT binding to support INn_MODE init_data. Each
input signal path can be configurated either as a Analogue or
Digital using the INn_MODE registers.
Signed-off-by: Inha Song
---
Documentation/devicetree/bindings/mfd/arizona.txt | 8
1 file changed, 8 insertions(+)
diff
Hi, Charles.
Thanks for your review.
On Wed, 13 Aug 2014 13:18:14 +0100
Charles Keepax wrote:
> On Wed, Aug 13, 2014 at 08:54:56PM +0900, Inha Song wrote:
> > This patch update DT binding to support INn_MODE init_data. Each
> > input signal path can be configurated either a
This patch update DT binding to support INn_MODE init_data. Each
input signal path can be configurated either as a Analogue or
Digital using the INn_MODE registers.
Signed-off-by: Inha Song
---
Documentation/devicetree/bindings/mfd/arizona.txt | 8
1 file changed, 8 insertions(+)
diff
Some boards need to set the INn_MODE[1:0] register to change
the input signal patch. This wlf,inmode property is optional.
If present values must be specified by the number of
ARIZONA_MAX_INPUT.
Example:
- wlf,inmode = <2 0 2 0>;/* IN1, IN3 use DMIC */
Signed-off-by: Inh
Some boards need to set the INn_MODE[1:0] register to change
the input signal patch. This wlf,inmode property is optional.
If present values must be specified by the number of
ARIZONA_MAX_INPUT.
Example:
- wlf,inmode = <2 0 2 0>;/* IN1, IN3 use DMIC */
Signed-off-by: Inh
Hi, Charles.
Thanks for your review.
On Tue, 12 Aug 2014 09:28:11 +0100
Charles Keepax wrote:
> On Sat, Aug 09, 2014 at 05:31:38PM +0900, Inha Song wrote:
> > Some boards need to set the INn_MODE[1:0] register to change
> > the input signal patch. This wlf,inmode property is o
This patch update DT binding to support INn_MODE init_data
Signed-off-by: Inha Song
---
Documentation/devicetree/bindings/mfd/arizona.txt | 5 +
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt
b/Documentation/devicetree/bindings/mfd
Some boards need to set the INn_MODE[1:0] register to change
the input signal patch. This wlf,inmode property is optional.
If present values must be specified by the number of
ARIZONA_MAX_INPUT.
Example:
- wlf,inmode = <2 0 2 0>;/* IN1, IN3 use DMIC */
Signed-off-by: Inh
75 matches
Mail list logo
