e-smith server 4.1b4 fresh install
Web manager says my snapshot it approx 12 mb in size, when I back it up to
my desktop the file is only 3.65 mb in size.
Garret
>
> On Mon, 29 Jan 2001, Audrius wrote:
>
> > Hello,
> >
> > and sorry for not clear mail. I am new to linux and to mailing lists.
And my
> > English is not so good... :)
>
> But infinitely better than our Latvian.
>
Well, I am from Lithuania ... but it is near Latvia ... :)
> > > > PC Compaq D
On Mon, 29 Jan 2001, Rob Adams wrote:
> > I agree with Michael, why would you put a netlogon add-on onto a machine
> > which isn't acting as the domain master?
>
> Umm because the client requests it? Sometimes the client is clueless :)
OK, so do as Michael says, and remove the rpm.
> Maybe the
On Sun, Jan 28, 2001 at 10:15:23PM -0500, Charlie Brady wrote:
>
> AFAIK, samba cannot be a BDC.
Correct. In the NT 4.0 domain model, the communication protocol used between
PDCs and BDCs is proprietary and known only to Microsoft. The Samba team was
at one point trying hard to reverse-enginee
Jeb,
Out of curiousity, which browser are you using to access webmail? I have a
4.1b3 system with webmail enabled - and the Contacts button works fine from
both locations - I'm using Netscape 4.75 on a Linux (RH7) box, though.
Just curious,
Dan
On Fri, Jan 26, 2001 at 11:59:24PM -0500, Jeb Cam
- Original Message -
From: "Charlie Brady" <[EMAIL PROTECTED]>
To: "Scott Duncan" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Monday, January 29, 2001 3:37 AM
Subject: RE: [e-smith-devinfo] e-smith/samba logon.bat file
>
> On Sun, 28 Jan 2001, Scott Duncan wrote:
>
> > Now this
On Sun, Jan 28, 2001 at 09:30:33PM +0100, Pieter Köhne <[EMAIL PROTECTED]> wrote:
> [...]
> My isp requires me to send the nic's mac adress. (chello, the
> netherlands). The IP adress should be 213.46.3.197. It seems to me
> that is is asking hdcp info for the wrong ip number (213.46.15.185).
> [.
On Mon, 29 Jan 2001, [ISO-8859-1] Pieter Köhne wrote:
> Maybe a bit beside the scope of 4.1b4 beta testing...
>
> Trying to install hylafax rpm complains about the installed Redhat
> version. (and a couple of missing components, of course)
>
> [root@server home]# rpm -Uvh hylafax-4.1beta2-2rh7.
On Mon, 29 Jan 2001, Pierluigi Miranda wrote:
> I've been asked to save in a log file a copy of every email message that was
> sent and received thru my E-Smith gateway.
> ...
Please do NOT distribute this RPM. You are violating the qmail author's
distribution conditions. See
http://cr.yp.t
If you don't have DHCP the installer will complain about it, let you config your
static ip, and then let you enter the ftp server/path. At the campus here the install
took twenty two minutes from the e-smith site. Is there any reasonable assumption of
the state of synchronicity between the is
Nope, still requires manual edit of klogd -c 1 to /etc/init.d/syslog to stop
console overwrites.
Darrell
> -Original Message-
> From: Gordon Rowell [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, January 28, 2001 1:11 PM
> To: Darrell May; e-smith-devinfo (E-mail)
> Subject: Re: [e-smith-devi
On Sun, Jan 28, 2001 at 03:51:32PM -0500, Gordon Rowell <[EMAIL PROTECTED]> wrote:
> [...]
> What do you get when you run:
>
>grep ExternalDHCP /home/e-smith/configuration
> [...]
Could you also send the output of
grep -i dhcp /home/e-smith/configuration
Thanks,
Gordon
--
Gordon Rowell
On Tue, Jan 30, 2001 at 06:18:07PM +0100, Pierluigi Miranda
<[EMAIL PROTECTED]> wrote:
> A couple of questions: what the modules e-smith-named and e-smith-hosts do?
> I tested e-smith-named and it seemed to me that it lets one give names to
> specific systems already. What is e-smith-hosts for?
..cut..
> Now this may not apply to everyone; but those who have NT
> servers on their
> networks (especially when said servers act as primary domain controllers)
> will find that installing this module will kill the ability to
> login to that
> domain if the workgroup setting is the same.
>
>
I've got 4.01b3 running quite happily on a 486DX-66 laptop. Even got it to use
the pcmcia network card.
It's a little slow when on the config side but normal use is fine.
Steve
Quoting Dean Staff <[EMAIL PROTECTED]>:
> I realize that a 486DX-4 100 is not officially supported hardware,
> but
On Sat, Jan 27, 2001 at 01:00:02PM -0600, maverick <[EMAIL PROTECTED]> wrote:
> [...]
> Not a problem...
>
>
> I've added the following line into one of our E-Smith machines to allow
> traffic to a port on one of the Windows boxen:
>
>
>
> ipmasq
On Tue, 30 Jan 2001, Peter Samuel wrote:
>
> As long as ~alias/.qmaillog exists, is owned by alias and has 0644
Of course that should have been ~alias/.qmail-log
--
Regards
Peter
--
Peter Samuel[EMAIL PROTECTED]
http://www.e-smith.org (development)http:/
The external interface fails receiving valid dhcp information, from
/var/log/messages:
Jan 28 14:22:13 server network: Bringing up interface eth0: succeeded
Jan 28 14:22:13 server network: ^[[60G
Jan 28 14:22:13 server network:
Jan 28 14:22:13 server network: Bringing up interface eth1:
Jan 28 1
On Sun, 28 Jan 2001, Michael Jung wrote:
> > > e-smith-manager --> Mail log file analysis --> Sender statistics :
> > > Looks like:
> > >
> > > mess bytes sbytes rbytes recips triesxdelay sender
> > > 2 20660 20660 20660 2 2 0.194635 0/2 20928
> > > 20928 20
Due to the new bind security hole, I got the RH7 update for bind
(bind-8.2.3-1.i386.rpm) and rpm -Uvh'd it. Then restarted named, queried it,
and there were no problems.
The dns servers on 4.1b4 aren't reachable from the internet (Just like the ones
before it, although to be paranoid I re-checke
I have experianced this also in an upgrade from 4.1b2 to 4.1b4
Garret
- Original Message -
From: "R.J. van Lavieren" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, January 28, 2001 9:29 AM
Subject: RE: [e-smith-devinfo] upgrade from 4.1b3 to 4.1b4
>
> > Randy Brown [mailto:[E
On Tue, 30 Jan 2001, Pierluigi Miranda wrote:
> As for the enabling/disabling of the log, I made exactly the tests you
> suggested, and works like a charm. :)
Let's hope you never have to enable it :)
--
Regards
Peter
--
Peter Samuel[EMAIL PROTECTED]
http://
When i upgraded from 4.1beta3 to 4.1beta4 the /home/netlogon/netlogon.bat
was
overwritten bij the new one. Is this by design or did i something wrong.
regards,
Ron van Lavieren
On Sun, Jan 28, 2001 at 06:40:25PM +0100, "R.J. van Lavieren" <[EMAIL PROTECTED]>
wrote:
>
> When i upgraded from 4.1beta3 to 4.1beta4 the /home/netlogon/netlogon.bat
> was overwritten bij the new one. Is this by design or did i something wrong.
> [...]
It's by mistake, not by design. The netlo
On Sun, Jan 28, 2001 at 11:21:01AM -0500, Charlie Brady <[EMAIL PROTECTED]> wrote:
> [...]
> No, I didn't write that. Daniel C. Slagle <[EMAIL PROTECTED]> wrote that.
> You have quoted from my reply to him.
My apologies. You are quite correct. This is part of the reason why we like
to keep replie
hello, I know this question has been asked a lot in the past so I regret having to ask
it again. I would just like to know what the default password for mysql is in e-smith
4.1b3
-thanks
-=geoff
I've upgraded from 4.1beta3 to 4.1beta4
In beta3 i was able to use the printer attached to the e-smith server.
After the upgrade i could'nt use the printer (according to my w2k
workstation said the printer was offline, and needed user input ). I looked
in the /etc/printcab file and it was empty b
On Mon, 29 Jan 2001, Audrius wrote:
> >
> > On Mon, 29 Jan 2001, Audrius wrote:
> >
> > > Hello,
> > >
> > > and sorry for not clear mail. I am new to linux and to mailing lists.
> And my
> > > English is not so good... :)
> >
> > But infinitely better than our Latvian.
>
> Well, I am from Lit
Gordon Rowell wrote:
>Just before anyone asks, let me state that we will not be putting this
>feature into the e-smith server and gateway. We believe in providing
>sufficient logs for you to trace what happened to mail messages, but do
>not believe in logging email content.
Neither do I, but I'h
Upgrade (from cd) went smooth except for one thing:
IMP webmail doesn't work anymore.
error message:
Fatal error: Failed opening required '../config/horde.php3'
(include_path='.:/home/httpd/horde-phplib') in
/home/httpd/html/horde/imp/login.php3 on line 21
I also run PHPGroupware, wich runs oke
I was just wondering if anyone had thought of including the Jabber
server in e-smith. An instant messaging option seems like a natural
extension of the e-smith offerings.
Thanks,
Vince
On Mon, 29 Jan 2001, Rob Adams wrote:
> > OK, so do as Michael says, and remove the rpm.
> >
> > > Maybe the e-smith server will be a BDC ?
> >
> > AFAIK, samba cannot be a BDC.
>
> Well maybe not a BDC, but in can act as a member server. See URL
>
> http://samba.anu.edu.au/samba/docs/samba-pdc-
FYI:
The long term goal it to be able to see and use all resources on both
networks (Network Neighborhood shows all servers and printers) and in the
near future add another network (192.168.3.0)
I have my VPN between 2 e-smith servers running in some type of degraded
mode. I can ping from a
On Fri, 26 Jan 2001, Darrell May wrote:
> ide-cd, ide-tape and/or ide-scsi modules are not loaded at boot.
Neither they should be. What matters is that they are demand loaded when
required.
> [root@e-smith /etc]# cat modules.conf
>
> alias scsi_hostadapter ide-scsi
> pre-install ide-scsi
Hello,
I found myself an older ISA 1542 SCSI card. The installer is the same as RedHat 7
right? Under RH7 the card gets detected without a problem with the E-smith install it
seems like it is skipping this step.
I have now manually added it in the modules.conf and added the append="aha1542
Reported bugs which have been fixed:
- NTP still blocked by packet filter
- fixed in e-smith-ntp-1.2.0-03
- Apache doesn't start if php is disabled and horde is enabled
- fixed in e-smith-horde-1.2.0-04
- fetchmail does not run if email retreival is changed from standard to
multi-drop
-
On Sat, 27 Jan 2001, Daniel C. Slagle wrote:
> The problem seems to be with the e-smith-lib-1.1.0-40 not getting upgraded
> to e-smith-lib-1.2.0-02.
>
> To fix this you can do a rpm -e --nodeps e-smith-lib-1.1.0-40
Please don't do "--nodeps" unless there is a good reason for doing it.
> mount
On Fri, 26 Jan 2001, maverick wrote:
> - Original Message -
> From: "Peter Samuel" <[EMAIL PROTECTED]>
> To: "maverick" <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Friday, January 26, 2001 1:30 PM
> Subject: Re: [e-smith-devinfo] Turning monitor blanking off...
>
>
> > Try
> >
Dan Brown:
>I'd prefer to see something with more
>summary/explanation/analysis of the important stuff. Are there any
>other good alternatives?
What is the objective your trying to meet Dan? If it is needed for security
related reasons maybe you should be looking at Snort, a lightweight but
ext
On Fri, 26 Jan 2001, Brian Moore wrote:
> gretings all.
>
> have added a line to my /etc/smtpd_check_rules file like the folowing to
> allow my box to act as a secondary mx server for another domain wonder if
> this rule is correct. looks like it would be right to me but want to make
> sure.
>
On Sun, 28 Jan 2001, Gordon Rowell wrote:
> On Sat, Jan 27, 2001 at 10:39:15PM -0500, Charlie Brady
> <[EMAIL PROTECTED]> wrote:
>
> > [...As part of some other mail...]
> >
> > I would still like to go to my internal DNS first, then corporate, then out.
> > Maybe it's just me.
No, I didn't wri
On Thu, 25 Jan 2001, Steve Galloway wrote:
> Having searched on the net, I came across a clue at
> http://boudicca.tux.org/hypermail/linux-kernel/2000week30/0300.html
> Stop diald, stop the atalk service then start diald - no error message and
> the ifconfig shows MTU:1500 (the default) even w
Hi Brent,
On Sat, 27 Jan 2001, Brent Crighton wrote:
> upgraded 4.1.3 to 4.1.4
>
> install auto created a lilo.conf entry for e-smith-up
> but default remained e-smith
I'm sorry, but I don't understand your shorthand.
- what is "install auto"?
- what is "entry for e-smith-up"? Ah, I have a gu
I've got it working as follows:
mkdir -p /etc/e-smith/templates-custom/etc/inittab
echo "bl:7:once:/usr/bin/setterm -blank 0" \
> /etc/e-smith/templates-custom/etc/inittab/90noblank
/sbin/e-smith/expand-template /etc/inittab
/sbin/telinit -q
--
Regards
Peter
--
Peter Samuel
With 4.01b3 I'm getting the following in /var/log/messages when diald starts up. Any
ideas?
I'm running a server/gateway with a dialup modem connection to my ISP and multidrop
e-mail.
diald: diald startup succeeded
modprobe: modprobe: Can't locate module tap0
modprobe: modprobe: Can't locate mo
On Fri, Jan 26, 2001 at 07:04:04PM -0500, "Daniel C. Slagle" <[EMAIL PROTECTED]> wrote:
> I just upgraded from beta 3 to beta 4. The upgrade seemed to go well other
> than it was really slow. The only thing I can base that on is, from 4.0 to
> beta 3 was 14 minutes this took over 20 minutes. Af
Hi Guys,
I'm having some dramas with qmail and badmailfrom in
/var/qmail/control/
If I place something like:
.domain.com
@domain.com
[EMAIL PROTECTED]
Is this the right syntax to disallow mail from the above hosts and
users@hosts?
Cheers
--
Dean Br
Not a lot needs doing Charlie,
I installed the kernel-pcmcia-cs-2.2.18-22.rpm from my RH7.0 CD.
Lied to e-smith by telling it I had a 3c59x ethernet card for eth0.
Loaded the card manager with /etc/rc.d/init.d/pcmcia start.
To save this across future reboots, did an ln -s
/etc/rc.d/init.d/e-smit
I am receiving these messages, one every time I send one message to
e-smith-devinfo. What's going on?
Darrell
-Original Message-
From: Mail Delivery Subsystem [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 26, 2001 6:38 PM
To: [EMAIL PROTECTED]
Subject: Returned mail: Service unavaila
I first upgraded my server from 4.1b3 and I think it was ok, but when I did a
fresh install of 4.1b4, pppoe seemed to be broken.
It would bring up the interface, but it set the default route to 192.168.65.1
(and the eth1 as 192.168.65.something).
I had to go and take the old default route down:
On Sat, Jan 27, 2001 at 10:39:15PM -0500, Charlie Brady <[EMAIL PROTECTED]> wrote:
> [...As part of some other mail...]
>
> I would still like to go to my internal DNS first, then corporate, then out.
> Maybe it's just me.
In that case, you would set the DNS forwarder to your corporate DNS. Y
the external interface of my 4.1b3 server seems to go to sleep, for lack of
a better word. when it's sleeping, it can't be pinged, the web page (xyz co)
won't load, and pptp clients cannot connect. however, all outgoing internet
services remain functional -- the windows boxes behind the emsith
On Thu, 25 Jan 2001, Steve Galloway wrote:
> With 4.01b3 I'm getting the following in /var/log/messages when diald starts up. Any
>ideas?
> I'm running a server/gateway with a dialup modem connection to my ISP and multidrop
>e-mail.
>
> diald: diald startup succeeded
> modprobe: modprobe: Can
I have a RedHat 7 Driver Disk for the a 3ware RAID card that I tested using
a standard RedHat install. The test worked fine and everything went
perfect.
Is there, at install time, a way to use that same disk to load e-smith? I
know I could load to a system drive then insmod to load, but I am lo
I am in need of this information also thanks.
Rob.
- Original Message -
From: "Harry" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 17, 2001 12:50 AM
Subject: [e-smith-devinfo] procmail
> Any information available for setting up procmail on e-smith?
>
> Harry
>
>
- Original Message -
> On Thu, 19 Apr 2001, francis wrote:
>
> > it is possible to upgrade the kernel of e-smith ?
>
> There are multiple complications with upgrading to the 2.4 kernel series:
On today's SlashDot, we saw an hint
of a security glitch in 2.4, so maybe it's
best to wait f
On Thu, 19 Apr 2001, Michael Maxwell wrote:
> Getting to my point...
> If the raylink and webgear wireless NICs work under e-smith so why not add
> the two NICs to the supported hardware list ?
We prefer to only count hardware as supported when it is autodetected, and
works "out of the box". Ne
[...]
> isn't that the place where you normally have to use a *user*
> name/password,
> *not the machine* name when you join a domain for the first time?
>
> When I have to join a WinNT box in a Windows domain, I use the
> administrator's userid/password at that point?
Correct for a Windows NT
With Gordon's and Charlies help we successfully installed bpalogin with the
instructions given.
However there were one or two other things we did:
reset telstra modem after installing a new machine\NIC
ifup your card. This forced a IP out of the dce-server.This only needed
doing the first time af
Dan Brown wrote:
> /etc/e-smith/events/actions/machine-account-create machine-create foo
>
> [root@e-smith home]# /etc/e-smith/events/actions/machine-account-create
> Rufus
> machinename argument missing at
> /etc/e-smith/events/actions/machine-account-create line 45.
Oops, duh, I lef
Has anyone had any success generating and using a hylafax cover page?
Has anyone created a Win32 cover page solution?
I have read the faq's and hylafax mailing list archive which gives
many solutions, none of which seem to work :-(
I have not tried the X11 programs tgif and latex to generate, th
> -Original Message-
> From: Peter Samuel [mailto:[EMAIL PROTECTED]]
> Sent: Monday, April 16, 2001 1:49 PM
> To: Dean Staff
> Cc: [EMAIL PROTECTED]
> Subject: Re: [e-smith-devinfo] qmail logs - wishlist
>
> the time structure contains the stime value in a 32 bit
> signed integer.
>
> I
Hi all,
I am new on this list ... and i begin with Linux :)
i want to "build" a home "router" based on e-smith ... so i have a ALCATEL
ADSL MODEM (speed touch) theri is driver for linux but
Is it possible to install it on the e-smith ?
Thanks
Francis
_
Des Dougan wrote:
> I assume you mean for an NT or W2K box? There's a thread on the General
> forum entitled "Domain Logon" which may be what you need.
Yes, that's right. I just installed Samba 2.2.0 on the e-smith box,
and I'm trying to use it as a domain controller for a Win2k machine
On Mon, Apr 16, 2001 at 09:55:32AM -0700, Darrell May wrote:
>
> I have not tried the X11 programs tgif and latex to generate, then
> convert the cover page, but I may try this next.
latex is not an X11 program.
K.
--
Kirrily "Skud" Robert -- [EMAIL PROTECTED]
Developer website: http://www.e-
I was browsing Redhat powertools and found portsentry.
Has anybody installed portsentry on e-smith???
Should we install it???
Regards
Brandon Friedman
Tech-Knowledgy Advantage
(Tel.) +27 11 486-0626 (Cell.) 0834087840
(Fax.) +27 11 486-0629 (E-mail) [EMAIL PROTECTED]
www.techknowledgy.co.za
PO
> If we get all the glue set up so that hardware is recognised and correctly
> configured (by writing the code, or by integrating some contributed code
> :-)) then we will be very happy to add that stuff to the supported
> hardware list.
Ill see what i can do :-)
> BTW, your web site says your s
Rolodap has the ability to add notes to contacts. I don't think I would want
to use it for cumulatively very long notes, but works fine for short notes.
Click on the little pen icon next to a listing and go halfway down the screen
to see the notes field.
John
Ralph Dorr wrote:
> I've been look
I am running 2.2.0, had to upgrape PAM.
Works great, I have NT4, Win2K and win 98 all loged on to the domain. You do
have make sure you are not loged onto the workgroup when you change over,
and don't forget to add the machine accounts for NT and win2k.
-Original Message-
From: Michael D
On Fri, 20 Apr 2001, francis wrote:
> I need to upgrade because i have a USB ADSL modem and the 2.2 kernel does
> not support the USB ...
There is some USB support in the RedHat 7.0 kernel that we ship, but no
support for ADSL modems as far as I am aware.
You are aware, I hope, that there are
> -Original Message-
> From: Darrell May [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, April 12, 2001 7:20 PM
> To: 'John Powell'; Devinfo@Lists. E-Smith. Org
> Subject: RE: [e-smith-devinfo] Confusion in How-to and contributed was
> [Re : [e-smith-devinfo] Thank You e-smith]
>
>
>
> Joh
> > This is the chicken and egg problem I mentioned. Charlie has
> a new version,
> which should fix it, and I am putting it through its paces
> before we make
> it available.
>
> > [...]
> > reset modem [if new NIC only]
> > ifup eth# [this will get a re-newed IP]
> > wait.and
> > wait.
>
> If yo
it is possible to upgrade the kernel of e-smith ?
thanks
francis
__
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance
Since a few days I have the Tivoli Backup Client 4.1 for RedHat 7.0
successfully running on my E-Smith Server. May be interesting for people who
have such a network backup service offered in there network.
No tape changes and a 120 day history as backups, scanning emails and ibays
for viruses, no
I think that is being caused by NTP polls. Try disabling NTP in the control
panel and see if that cuts it out. Assuming it does, you can hack in ntp
like functionality by adding a cron job to run ntpdate at the same time as
fetchmail (you could hack this right into the /etc/startmail script, or
Quoting Brandon Friedman <[EMAIL PROTECTED]>:
> I was just curios as to wether you can install Postgres on e-smith? Also
> why choose mysql over postgres???
By most accounts, MySQL is quite a bit faster than current versions of
Postgres.
> Aren't there license issues with MySQL?
No, M
On Mon, 16 Apr 2001, Dean Staff wrote:
> Hi All,
>
> Does anyone know if and how you can change the date stamp in the
> /var/log/qmail log files from the cryptic stardate format to the same
> format used my /var/log/maillog ?
It's not that cryptic. It's the number of seconds since midnight, J
> I still can't connect to the domain with my Win2k box. I'm going to
> Identification Changes, selecting Domain and entering the
> domain/workgroup name, then clicking OK. When it asks for the "name and
> password of an account with permission to join the domain", I enter the
> machine name (w
On Mon, 16 Apr 2001, Dean Staff wrote:
> On 16 Apr 2001, at 11:56, Peter Samuel wrote:
>
> > On Mon, 16 Apr 2001, Dean Staff wrote:
> >
> > > Hi All,
> > >
> > > Does anyone know if and how you can change the date stamp in the
> > > /var/log/qmail log files from the cryptic stardate format to
On 20 Apr 2001, at 17:11, Franck ZOCCOLO wrote:
> Francis is connected to an Alcatel DSLAM... So he'll have to use an
> Alcatel modem.
Correct me if I'm wrong, but the Dutch KPN uses Alcatel modems
too, but they sell plain ethernet modems beside the USB ones.
Isn't that an option in France ?
On Wed, 18 Apr 2001, Des Dougan wrote:
> Has e-smith set a projected date for releasing an e-smith version of
> this?
No.
I've noticed that someone else has already reported upgrading to 2.2
without any problem. I don't know at this stage whether that gives you any
of the new features without
Dan,
I assume you mean for an NT or W2K box? There's a thread on the General
forum entitled "Domain Logon" which may be what you need.
At 15:50 18/4/2001, Dan Brown wrote:
>. I know I need to make an account for my client
>computer on the e-smith box before I can log on to a domain--how do I d
Internally we use LDAP heavily. For us it controls our security access , email
handling, and calandar (we use Steltor).
I use Rolodap for address autocompletion in my emailer (almost every emailer
supports LDAP for this purpose) and as an address book (using Netscape
Communicator). Mozilla will
Lost my notes. can't find mysql password. TIA.
G'Day All,
Just a quick note, that I have managed to get Compaq's management =
software agents and web admin stuff working on a ML 350 with Smart RAID =
and e-smith 4.1.1.
If anyone needs info quickly I can help - but I will post some clean =
formatted instructions within a couple of weeks. All
On Thu, Apr 19, 2001 at 03:40:57PM -0400, Dan Brown wrote:
> Quoting Kirrily Robert <[EMAIL PROTECTED]>:
>
> > No, the reason e-smith chose MySQL is that it was required by IMP for
> > web mail.
>
> Not at all--IMP will work with Postgres just as well. In fact, there's a
> horde-pgsql RPM
You'll need a "2.4 kernel" in order to use these drivers.
E-Smith does not use a 2.4 kernel, and I think it'll be pretty hard to
upgrade from 2.2 to 2.4.
> -Message d'origine-
> De : Francis [mailto:[EMAIL PROTECTED]]
> Envoyé : jeudi 19 avril 2001 11:07
> À : [EMAIL PROTECTED]
> Objet :
Charlie wrote:
> I'd agree with John Powell - either could have done the job, and there's
> nothing wrong with the choice of MySQL.
I am just probing the subject - e-smith's have stated that they prefer to
have a varitey solutions for a function - ie different backup solutions, fax
server etc. I
>>two version exist, 0.2-4 is for stock ver 4 e-smith
>>0.2-5 is for ver 4.01/4.1 released december 2000
could my ver 4.1.1 be before december?
>>-The dialin rpm is not yet compatible with 4.1 or 4.1.1.
>>-
>>-Eric
>>-
>>--Original Message-
>>-From: Dave Reinhardt [mailto:[EMAIL PROTEC
OK, I already found what I was doing wrong. A typo in virtualdomains
It's working now
Joost
[EMAIL PROTECTED]
10-04-2001 10:21
To: Gordon Rowell <[EMAIL PROTECTED]>
cc: [EMAIL PROTECTED]
Subject:Re: [e-smith-devinfo] Mail server confusion
And w
I have also installed hylafax on e-smith and it is working very well. I am
using the whfc client, it is much faster than Cypheus and very
straightforward.
The standard fax resolution is pretty poor indeed. But setting resolution to
high (Fine Print) in whfc handled it and now I am very happy with
John,
> There is a lot of great stuff there, but it is apparent there is no serious
> effort into maintaining the doc, version compatibility information,
> eliminating redundant or outdated stuff, etc. The "contrib" section is
When I joined e-smith in October, it was to head up a team of people
I've also encountered this issue with file locking on
Accpac (DOS) installed on the e-smith server. The fix was to
turn off opportunistic locks (oplocks) as others have mentioned
on this thread. Very prevalent if the workstations are WinNT/W2k.
You may implement this either per ibay or globally
Hi Luuk
In the perl script, it should have a path statement leading up the script.
You should paste the script here, assuming it's not sensitive, so we can
"look" it over together
Allen
-Original Message-
From: Luuk Jansen [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 11, 2001 13
Thanks,
I'll wait with installing the extensions because I make a lot of changes in
my I-bay's and stuff for test purposes.
Frontpage has a few functions (such as 'send reaction to e-mail' and 'a hits
counter') that are useful, but can be created on various way's. It's easy
when you can 'drag an
Hi,
Me again!
I put the server in question (Mail - be good everyone!) into server and =
gateway mode.
Made sure that the correct net cards were assigned to the correct duties =
(As I could ping correctly).
And then rebooted.
Now I could get into the manager using a SSH tunnel to port 980 ok.
> [...]
> > isn't that the place where you normally have to use a *user*
> > name/password,
> > *not the machine* name when you join a domain for the first time?
> >
> > When I have to join a WinNT box in a Windows domain, I use the
> > administrator's userid/password at that point?
>
> Correct fo
Hi there,
Still working with on the permissions, and now trying to get Cgi working.
First my form on the webpage pointed to 'mail.cgi', but then I get
'permission denied'.
Now I've changed it to '/cgi-bin/mail.cgi' and I get the following:
>Internal Server Error
>The server encountered an intern
This is merely theory, I didnt get to try this on the system I was
massaging.
On the RH7.0 box,
use one of the tools that are on the qmail webpages to convert the mbox
formats, then tar the resulting users home directories up, transfer them to
the new machine untar and check permissions etc..
R
G'Day Dave,
Try
"rpm -Uhv mgetty-1.1.14-8.i386.rpm --nodeps"
Good Luck !
--
Michael Maxwell - 1979
E-Mail: [EMAIL PROTECTED]
Web Site: www.metalmick.com
ICQ: 114460049
Melbourne, Australia
The difference between Windows and a virus is that a virus is free...
You want a faster Windows system?
1 - 100 of 1463 matches
Mail list logo
