Re: Hyperterminal serial port

2019-06-19 Thread UlanReed via Digitalmars-d-learn

On Wednesday, 19 June 2019 at 06:52:33 UTC, IanFisher wrote:

Hi,

I am wanting to establish a virtual serial port connection 
between an 89c51 being emulated in Proteus and Hyper Terminal 
running in Windows.


How do I go about doing this?

Thanks in advance


Hello.

Look at the reply above instead. The solution is there !

You need to replace Virtual Terminal with COMPIM (virtual COM 
interface). You must have 2 COMs free in your PC and a null modem 
cable (crossed).


Say you have COM1 and COM2 free. Connect the null modem between 
the two ports as a link and set COMPIM as the port COM1. Then use 
Windows Terminal (or whichever program you like) and set it as 
COM2. You'll see that any outputs that before were sent to the 
Virtual Terminal are now sent to Windows Terminal (or any other 
you may use).


Alternatively, if you don't have 2 physical COMs free then you 
may use some software driver, like Virtual Serial Ports Driver 
from https://www.serial-splitter.com/


Hyperterminal serial port

2019-06-19 Thread IanFisher via Digitalmars-d-learn

Hi,

I am wanting to establish a virtual serial port connection 
between an 89c51 being emulated in Proteus and Hyper Terminal 
running in Windows.


How do I go about doing this?

Thanks in advance