Hello John,
Please leave me an email at [EMAIL PROTECTED] if you were
successful, or hear my signal coming back. Power out is 30W
One additive possibility for other Hams is to
connect to your Pax2 responder and to leave a message. You will see all received
messages by clicking on the
I'm also monitoring 14075 today for PAX2, if you care to try a
connect. I tried VE5MU but without success so far, just running a
dipole and 40 watts today/
Does anyone know how to fix the center frequency at 1000 for receive
or is it supposed to wander in PAX search mode ?
Andy K3UK--- In
To whom it concerns,
in the PR APRS net running on 10.151 LSB there are again a few stations
who apparently do not know how to connect a TNC to a transmitter...
Can the people operating in this net do something about it? They are
splattering 3 kHz down, and make working PSKAPRS on 10.148
I uspect that the culprits may be using soundcard packet and over
driving. Alas, they are probably not aware of how nasty their signal
is. It might require several people monitoring 10.151 with software
that can detect wide signals in a waterfall, and then emailing the
offending operators.
Anyone for PAX2 on 40m or 80m? de KU2A in NH
--- In digitalradio@yahoogroups.com, Andrew O'Brien
[EMAIL PROTECTED] wrote:
I'm also monitoring 14075 today for PAX2, if you care to try a
connect. I tried VE5MU but without success so far, just running a
dipole and 40 watts today/
Does
Hello Dave,
TKS for the Windows references.
1 ms would be sufficient for Pactor 1 100 bauds, as a bit is 10 ms long.
Now, I wonder how transceivers can switch from RX to TX and TX to RX with
respect to the required precision (=1 ms) under the Pactor 1 protocol: 960
msec of TX frame and 290
absolutely. lets try 3610 USB after 0100 ? I'll set
up there early evening 7075 would be good, too.
PAX2 mode
Having trouble with Multipsk in PAX mode, when the
screen saver comes on, and am getting error messages, just disabled the screen
saver
so still sitting on 14075 USB
John,
I copied the following from your
becon:
CQ CQ CQ DE VE5MU VE5MU VE5MU
PSE K
I am located in north Alabama about 30 miles west
of Huntsville. I did not get a signal report
as I was not in the shack when it copied your
station. I can not transmit at present.
Joe IveyW4JSI
Age is
I connected to VE5MU but did not get much beyond that. Here is what I
monitored..
KV9U DE VE5MU CAN U COPY ME
YOU HAVE 2 VE5'S ON HERE, VE5TLW, TERRY AND VE5MU JOHN
PLEASE TRY TO CONNECT TO ME USING THE CONNECT COMMAND, PUT MY CALL IN
THE DESTINATION
NO U HAVE BOTH OF US ...SEND SOMTHING
a bit more
KV9U DE VE5MU CAN U COPY ME
YOU HAVE 2 VE5'S ON HERE, VE5TLW, TERRY AND VE5MU JOHN
PLEASE TRY TO CONNECT TO ME USING THE CONNECT COMMAND, PUT MY CALL
IN THE DESTINATION
NO U HAVE BOTH OF US ...SEND SOMTHING TERRY
OK TRY CONNECT TO VE5MU, THE WEAKER STATION
KV9U PUT ON YOUR
what was happening there was VE5TLW, Terry, who is
another digi head, located about 1lm from me, was fooling around connecting to
me and vice versa, trying to figure out more of the PAX mode
.
kv9u had a strong signal and u were under him a bit
but finally connected, once connected , you
thats when I put it on repeat.. using ECHO as
the repeater, I can repeat Pax frames that I can copy
- Original Message -
From:
Andrew
O'Brien
To: digitalradio@yahoogroups.com
Sent: Sunday, March 12, 2006 5:48
PM
Subject: [digitalradio] Re: First PAX2
I'm on 7042 (USB) for PAX2 tests.
Andy K3UK
Fredonia, NY.
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/
DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy
nothing heard on 7042, QSY'd to 3610 USB at
0200Z
- Original Message -
From:
Andrew
O'Brien
To: digitalradio@yahoogroups.com
Sent: Sunday, March 12, 2006 7:11
PM
Subject: [digitalradio] PAX2 on
7042
I'm on 7042 (USB) for PAX2 tests.Andy
K3UKFredonia, NY.
Called K3UK and VE5MU on 3610 but high QRN tonight.
Heard W6JVE on 7042 and tried a connect and no-go.
CQing/monitoring 7042 now de KU2A
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The MixW Reflector :
yup hi noise will move back to 7042.. see ya
there, Nick
- Original Message -
From:
Nick
To: digitalradio@yahoogroups.com
Sent: Sunday, March 12, 2006 8:35
PM
Subject: [digitalradio] Pax2 on 40m
Called K3UK and VE5MU on 3610 but high QRN
tonight.Heard
connected to nick on 7042 right
now..
- Original Message -
From:
Nick
To: digitalradio@yahoogroups.com
Sent: Sunday, March 12, 2006 8:35
PM
Subject: [digitalradio] Pax2 on 40m
Called K3UK and VE5MU on 3610 but high QRN
tonight.Heard W6JVE on 7042 and
Although I was not able to connect with VE5MU, I did copy a few frames,
but not much of the below listed material.
I just don't think that PAX or PAX2 works much into the noise even
though Patrick does have some information that it can work down to -7 db
S/N or something like that.
Does
Not enuff signal on this end John. I hear a PAX2 signal but it isn't
decoding. I'm running ~60w to an Inv Vee up 60' E/W on 7042 here.
--- In digitalradio@yahoogroups.com, John Bradley [EMAIL PROTECTED] wrote:
connected to nick on 7042 right now..
- Original Message -
From:
How does one LEAVE a message ?
Andy K3UK
--- In digitalradio@yahoogroups.com, Patrick Lindecker [EMAIL PROTECTED]
wrote:
Hello John,
Please leave me an email at [EMAIL PROTECTED] if you were successful,
or hear my signal coming back. Power out is 30W
One additive possibility for other
Anyone running digital modes on these rigs?
TenTec 580 Delta (not the Delta II)?
Or *any* tube rig, perhaps with a VFO Stabilizer
added?
I need to add a backup rig to my FT-890at and
have to find something *very* affordable.
--
~~
-I had a good connection to John with S/n about -5
VE5MU TEST PAX BEACON'
RESPONDER IS ON
WELCOME TO MY AUTOMATIC RESPONDER IN REGINA,
SASKATCHEWAN ,CANADA. OPERATOR JOHN
TYPE L TO READ THE TITLES OF THE 8 MESSAGES.
TYPE RX TO READ THE MESSAGE NUMBER X (X FROM 1 TO 8).
YOUR MESSAGE WILL BE
22 matches
Mail list logo
