Almost certainly you are in the wrong setting and thus not decoding. If your rig is in USB, try changing it to LSB. Alternatively, if you software has a "normal" and "reverse" setting (or "inverse") toggle those settings and you should be all set
Andy K3UK --- In digitalradio@yahoogroups.com, "Christopher K. Greenhalgh" <ch...@...> wrote: > > Hello all! > > Newbie to the group, and to HF RTTY as well, and have a question... > > My equipment is an Icom 746 Pro interfaced with a Kantronics KAM+. The > terminal software is XPWare. > > I'm an old school packeteer, so I know I have every thing installed > correctly (it works fine on the VHF side) and I have all the correct > parameters (45 baud, shift/mark/space tone freqs, ect)in place when I go > over to do RTTY. > > Okay, so I start tuning around 14.080 USB, and can clearly hear RTTY tones. > I use the KAMs meter to home in on the signal, but when I get there, I just > get gibberish to the screen. I know its trying to decode it, as the > gibberish will go away if I tune off just a little bit. > > I've been messing with this for a week...any ideas? > > Thanks much! > > 73. > > -Chris > > _________________________________ > Chris Greenhalgh, N8WCT > > www.n8wct.com >
