Hello to all,
I am hoping someone on here has a Signalink USB and could confirm that the
tones produced (and received) running the free version of AGWPE in HF 300 baud
packet are 2310Hz/2110Hz.
I have found on my new laptop's internal sound card there is a large difference
in RX/TX tones which
Try SR of 12000.
On Thu, Mar 25, 2010 at 12:00 AM, vk4vil wrote:
> I am totally new to digital radio, have an Icom 746PRO and interfacing for
> PSK31 with a SignaLink USB.
> I have a factory lead (computer to signalink) and home brew lead (radio to
> signalink. This was spreviously on a Yaesu an
I am totally new to digital radio, have an Icom 746PRO and interfacing for
PSK31 with a SignaLink USB.
I have a factory lead (computer to signalink) and home brew lead (radio to
signalink. This was spreviously on a Yaesu and I rewired.
I'm using the 6 pin on the radio and have wired a MiniDIN 6
i think in the ts2000 there is a menue point where you can controll the output
of the data port
happy 2009
dg9bfc
- Original Message -
From: n4hra
To: digitalradio@yahoogroups.com
Sent: Friday, January 02, 2009 6:37 PM
Subject: [digitalradio] Signalink USB Problems
I am
I have dropped the AF from the Rig from a 3 to a 1
That cleared the issue, will keep testing
Lew
- Original Message -
From: Simon Brown (KNS)
To: digitalradio@yahoogroups.com
Sent: Friday, January 02, 2009 12:38 PM
Subject: Re: [digitalradio] Signalink USB Problems
You
Seemingly you are experiencing clipping/distortion/overload from a too
high audio input, judging the fact that you are getting strong harmonics
in the passband.
73 & HNY,
Jose, CO2JA
---
n4hra wrote:
> I am having a problem with a new Signalink USB depending on how strong
> a station is I g
You are overloading the input to the SignaLink - try dropping the audio
output from the radio.
Or - it could actually be the other station :-)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: "n4hra"
>I am having a problem with a new Signalink USB depending on
I am having a problem with a new Signalink USB depending on how strong
a station is I get multl signal on the waterfalls from the same station.
it does not matter what PSK software I am running.
I did not have this issue when I was running a home brew Rascal
SET-UP: RIG: Kenwood TS-2000,OS: Vist
in the fldigi package) for arq
transmissions
just try it out :-)
best 73´s de dg9bfc
sigi
- Original Message -
From: KD7WII
To: digitalradio@yahoogroups.com
Sent: Saturday, December 20, 2008 4:05 AM
Subject: [digitalradio] Signalink USB + Fldigi
Looking for information on
Looking for information on how to properly setup Fldigi and Signalink
USB with a Ten Tec Jupiter. I am currently using Digipan and the
Signalink on PSK with great results.
Looking to try my hand at RTY and Olivia. Any information on settings
or set up would be appreciated. Thanks.
Steve, KD7WI
Anyone have experience with FT-840 & Signalink USB?Ray,K4YDI
ram I
>> have found is fldigi at URL http://www.w1hkj.com/NBEMS ...
>>
>> 73,
>> Howard K5HB
>>
>>
>> From: Raymond Lunsford <[EMAIL PROTECTED]>
>> To: digitalradio@yahoogroups.com
>> Sent: Thursda
t;>>
>>> 73,
>>> Howard K5HB
>>>
>>>
>>> From: Raymond Lunsford <[EMAIL PROTECTED]>
>>> To: digitalradio@yahoogroups.com
>>> Sent: Thursday, November 27, 2008 6:11:57 PM
>>> Subject: Re:
layed nothing on the waterfall.
Howard K5HB
From: Raymond Lunsford <[EMAIL PROTECTED]>
To: digitalradio@yahoogroups.com
Sent: Thursday, November 27, 2008 7:37:16 PM
Subject: Re: [digitalradio] signalink
Running in digital,seems to recieve with no problem
> From: Raymond Lunsford <[EMAIL PROTECTED]>
> To: digitalradio@yahoogroups.com
> Sent: Thursday, November 27, 2008 6:11:57 PM
> Subject: Re: [digitalradio] signalink
>
> Yaesu FT-840.Using cables they sent with the signalink.Trying to send MT-63.
> The
found is fldigi at URL http://www.w1hkj.com/NBEMS ...
73,
Howard K5HB
From: Raymond Lunsford <[EMAIL PROTECTED]>
To: digitalradio@yahoogroups.com
Sent: Thursday, November 27, 2008 6:11:57 PM
Subject: Re: [digitalradio] signalink
Yaesu FT-840.Using cable
Of Raymond Lunsford
> > Sent: Thursday, November 27, 2008 4:40 PM
> > To: digitalradio@yahoogroups.com
> > Subject: [digitalradio] signalink
> >
> > Does anyone have experience with a signalink?I
> can't get mine to
> > transmit clear legible information?
> &g
I'm using the same rig with the signalink and have never had
any problem with MT63.
John, W0JAB
At 06:11 PM 11/27/2008, you wrote:
>Yaesu FT-840.Using cables they sent with the signalink.Trying to send MT-63.
>The system goes into transmit as it should but the text at the other end is
>non-
>le
:12 PM
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] signalink
Yaesu FT-840.Using cables they sent with the signalink.Trying to send MT-63.
The system goes into transmit as it should but the text at the other end is
non-
legible,all mixed up makes no sense all in lower Case,no
Behalf Of Raymond Lunsford
> Sent: Thursday, November 27, 2008 4:40 PM
> To: digitalradio@yahoogroups.com
> Subject: [digitalradio] signalink
>
> Does anyone have experience with a signalink?I can't get mine to
> transmit clear legible information?
>
> -
@yahoogroups.com
Subject: [digitalradio] signalink
Does anyone have experience with a signalink?I can't get mine to
transmit clear legible information?
Announce your digital presence via our Interactive Sked Page at
http://www.obriensweb.com/sked
Yahoo! G
Does anyone have experience with a signalink?I can't get mine to
transmit clear legible information?
:[EMAIL PROTECTED] On
Behalf Of Rick W
Sent: Friday, October 31, 2008 12:56 PM
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] SignaLink USB Mods
Peter,
Very impressive web site information! You are not alone with the
Tigertronics SignaLink USB issues. At least the low frequency
Peter,
Very impressive web site information! You are not alone with the
Tigertronics SignaLink USB issues. At least the low frequency noise
problem.I have been contacted by one other ham who discovered this more
than a year ago. Immediately upon receiving the unit, I connected it to
my ICOM IC
I have now finalized (insofar as such a thing ever gets finalized) my
page describing how to change the Tigertronics SignaLink USB from merely
good to Excellent:
http://www.frenning.dk/OZ1PIF_HOMEPAGE/SignaLinkUSB-mods.html
--
Vy 73 de OZ1PIF/5Q2M, Peter
** CW: Who? Me? You must be joking!! *
On Wed, Sep 3, 2008 at 2:45 PM, Chuck Mayfield <[EMAIL PROTECTED]> wrote:
>
> I will simply make the
> suggestion that the "noise" in the original post is not noise, but
> rather it is interference, i.e. signals caused by the electronics in the
> unit and not from external sources.
>
Uhhh, while I
Mark Thompson wrote:
> http://www.popular-communications.com/PC%20Highlights%20Sept%2008.html
> TECH SHOWCASE
> The SignaLink USB Interface—A Plug-And-Play Solution For Digital
> Communications Modes
> by John Kasupski, KC2HMZ
>
> Anyone who has experimented with receiving digital format signals
al Message
From: matt gregory <[EMAIL PROTECTED]>
To: digitalradio@yahoogroups.com
Sent: Monday, August 25, 2008 7:54:50 PM
Subject: [digitalradio] signalink sL+
WONDERING IF ANYBODY IS USING A SIGNALINK SL+
FOR HIGH SPEED ARQ SOFTWARE IE RFSM2400 OR ALIKE ?
I'M CURIOUS OF PERFORMA
Hi Bonnie,
The SL-1+ has a TX delay of 28ms on its fast setting.
I first tried using direct PTT for ALE400 FAE (like I do for Pactor) but
found no noticeable difference in performance versus the SL-1+ VOX PTT.
Does it really make that much difference?
73 Sholto.
expeditionradio wrote:
>> S
Hi Bonny,
so what's better instead of signalink sl1+/ usb
73, Jürgen
DG8FDD
- Original Message -
From: expeditionradio
To: digitalradio@yahoogroups.com
Sent: Tuesday, August 26, 2008 6:51 PM
Subject: [digitalradio] Signalink No Good for ARQ Modes
> Sholto Fish
> Sholto Fisher wrote:
> Bonnie and all,
> I use the SignalLink SL-1+ (older version, not USB)
> for ARQ modes successfully. I use MultiPSK and the
> ARQ modes I have tested and had
> working are: ALE 141A, ALE400, Pax/Pax2 and Packet.
Hi Sholto,
The fact that you were able to make contacts
:54:50 PM
Subject: [digitalradio] signalink sL+
WONDERING IF ANYBODY IS USING A SIGNALINK SL+
FOR HIGH SPEED ARQ SOFTWARE IE RFSM2400 OR ALIKE ?
I'M CURIOUS OF PERFORMANCE BEFORE I CONSIDER PURCHASE
MATTHEW A. GREGORY
KC2PUA
WONDERING IF ANYBODY IS USING A SIGNALINK SL+
FOR HIGH SPEED ARQ SOFTWARE IE RFSM2400 OR ALIKE ?
I'M CURIOUS OF PERFORMANCE BEFORE I CONSIDER PURCHASE
MATTHEW A. GREGORY
KC2PUA
I have a problem, just looking for confirmation.
I think I have lost the Audio out of the Data Port on my TS480. Just to
confirm. I Plugged earphones into the spkr jack and the mon jack on the back
of the USB, No Sound, so I am pretty sure it has a problem. the xmt circuit
is working o
Andrew O'Brien wrote:
> Chasm, I will forward this to our MixW help mail list and see if we can get
> this figured out.
>
> Andy K3UK
thank you, I was thinking that there was such a list.
I also hope that there are others running the same conbination of OS and
VM. 73/chas K5DAM
Chasm, I will forward this to our MixW help mail list and see if we can get
this figured out.
Andy K3UK
On 9/7/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
>
> On Fri, 7 Sep 2007 06:27:38 -0400, "Andrew O'Brien" <
> [EMAIL PROTECTED] >
> wrote:
>
> >Try us, what is the issue ?
>
> machine
On Fri, 7 Sep 2007 06:27:38 -0400, "Andrew O'Brien" <[EMAIL PROTECTED]>
wrote:
>Try us, what is the issue ?
machine is a MacIntel Pro running XP Pro in a Parallels VM
this machine has NO serial ports, only USB2.0 and a couple of 1.0
State - starting and running in BPSK31
1. machine signal tone
Try us, what is the issue ?
Andy K3UK
On 9/6/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
>
> anyone using mixW 2.x with a Signalink USB on a Win XP Pro machine??
>
> please advise off list as I doubt that others want to hear it.
> thanks
>
> 73/chas
> --
> K5DAM Houston EL29fu AAR6TU
> [EM
anyone using mixW 2.x with a Signalink USB on a Win XP Pro machine??
please advise off list as I doubt that others want to hear it.
thanks
73/chas
--
K5DAM Houston EL29fuAAR6TU
[EMAIL PROTECTED]
in sound card is low noise and not as sensitive as my
> computer's
>KO4PU
> - Original Message -
> From: ku4a
> To: digitalradio@yahoogroups.com
> Sent: Wednesday, January 17, 2007 4:41 PM
> Subject: [digitalradio] SignaLink USB
>
>
> Does anyone ha
-
From: ku4a
To: digitalradio@yahoogroups.com
Sent: Wednesday, January 17, 2007 4:41 PM
Subject: [digitalradio] SignaLink USB
Does anyone have any experience with the new SignaLink USB from
Tigertronics? There is an introductory special price in effect until
January 31.
My m
Does anyone have any experience with the new SignaLink USB from
Tigertronics? There is an introductory special price in effect until
January 31.
My main question is about the availability of software. I would think
most programs out there are designed to talk directly to the computer
sound card. I
42 matches
Mail list logo
