It's yours if you want it - just pay postage.
Need your address...
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Graham g0...@hotmail.com
To: digitalradio@yahoogroups.com
Sent: Sunday, December 21, 2008 7:11 PM
Subject: [digitalradio] Re: Free M-Audio Delta 44
Dick, In general use USB - what's your radio?
Sometime selecting Digital enables audio I/O via a rear connector.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: kc4cop dic...@comcast.net
On a radio that has a mode choice of digital and (USB) , is there a
I kept receiving join requests and lots of unsolicited postings - got fed up
with it but didn't complain, just put it down to him being very eager.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Rick W mrf...@frontiernet.net
Just so I understand it, are you
Two areas where there is a need for digital comms:
1) Satellite / deep space
2) Boat owners far away without internet (let's ditch PACTOR please)
I'm indirectly involved with 1) and am following the WINMOR project which looks
very interesting. Here in central Europe there's not a huge need for
- Original Message -
From: Christian Crayton n5...@yahoo.com
1) Satellite / deep space
2) Boat owners far away without internet (let's ditch PACTOR please)
Hello, Simon!
I would add people with antenna and power restrictions such as myself in
the categories of needing digital
14.230 USB is very active...
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: marc
You can find HF Slow Scan TV at:
3.730 LSB, 7.033 LSB (rare), 14.230 USB, 28.680 USB.
These are calling frequencie. So +/-3KHz you'll find SSTV.
40m?
You should be hearing 20m PSK at the very least - to see what's available
just look at http://psk.gladstonefamily.net/pskmap.html
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Demetre Koumanakos sv1...@yahoo.com
I'm visiting Canada and I've been
You need the system time (SE_SYSTEMTIME_NAME) privilege enabled for your
account.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Kim kimme...@yahoo.com
Thanks for the suggestions. Yeah I've downloaded half a dozen softwares
that claim to access servers to
No ALC.
No Linear amps.
Lowercase much faster and less error-prone that uppercase.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien k3uka...@gmail.com
Usually , every week,we get at least one new member that indicates they
are new to PSK. So,
Kevin,
The DSP side of these things is often rotten - really rotten! the TS-480SAT is
an excellent radio and deserves much better :)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Gmail - Kevin, Natalia, Stacey Rochelle
I have a USB audio headset
FWIW been seeing ZL3RG on 30m PSK this morning.
IMO - the TS-480SAT is the best digital mode radio you can buy :)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Gmail - Kevin, Natalia, Stacey Rochelle
BTW, must go and check for an update on HRD, my main
I mean open-sourcing the code! It's a massive project which uses commercial
UI libraries from www.codejock.com and InstallShield for making kits, before
you can even compile you'll have to spend at least $3k on software licences
alone.
My plans for Q3/Q4 are a SDR console, this may be a better
I doubt it *very* much!
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Per
I'm sure if they open source HRD then interest for it would pick up.
I'm seeing Olivia and MFSK-16
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: dl8le dl...@darc.de
And if there wouldn't be mainly PSK and some RTTY but also Olivia activity
or other digital modes then it would be even more fun ...
Hi,
You can't let me get the HRD 5.0 betas available for the test team then I'll
look at the FT-450 and FT-9000 again.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Sholto Fisher sho...@probikekit.com
Just wanted to know if anyone knows how to add a new
: Simon (HB9DRV) simon.br...@kns.ch
You can't let me get the HRD 5.0 betas available for the test team then
I'll
look at the FT-450 and FT-9000 again.
Please look at:
http://www.ham-radio.ch/images/HRD-AudioMonitor-2009-04-14%20114504.jpg
10W from a TS-140S.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
I agree - here are my thoughts and plans for 2009.
1) The best idea to be implemented recently is Patrick's Reed-Solomon ID which
is also supported by fldigi and will soon be supported by DM780. My
implementation will continuously check the whole waterfall for RS ID's and let
the user know
Hi Patrick,
When you do this *please* let's talk about it together and try for a common
code base which works at any sampling frequency.
Vojtech - does your code run at 8kHz?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Patrick Lindecker
Hello
Hi,
Why must the sampling frequency be 11025?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Patrick Lindecker
No problem, but I program in Pascal not in C...(Votjech did a C source). The
sampling frequency must be 11025, but it is not a problem to
Digipan or fldigi
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Stan a...@swbell.net
So what would some one recommend for a KISS program, one that configures
its' self basicly.Just runs PSK31, I type it sends,it receives and
displays..
Sure,
What's the actual interface? I don't see a simple description anywhere on
the website :(
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Vojtech Bubnik bubn...@seznam.cz
To: digitalradio@yahoogroups.com
Sent: Sunday, April 19, 2009 3:02 PM
Subject:
MultiPSK and fldigi support this, RS-ID is *not* a QSO mode, rather a way of
reliably indicating the mode being used.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Gmail - Kevin, Natalia, Stacey Rochelle
Where can one get a copy of a soundcard based
Hi Andy,
Let me know what you would like, I'll pass suggestions to Claudio. Maybe
other logbook writes would like to integrate with HRDLog.net - it's quite
easy.
My original idea was simply a web-based logbook status thingy...
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original
Hi,
There is no HRDLog.net program - it's a web service with logbooks have to
support (similar to eQSL.cc support).
At the moment only the HRD 5.0 Logbook has this support but other logbooks
can add it quite easily. At the moment HRD 5.0 is in internal beta.
Simon Brown, HB9DRV
Sheena Easton
http://www.sheenaeaston.com/
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: John Becker, WØJAB w0...@big-river.net
Guess who's Birthday it is today ? ?
whose?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: John Becker, WØJAB w0...@big-river.net
That should read main Page
Guess who's Birthday it is today ? ?
Hi,
Off the top of my head:
1) Smoother UI - less cluttered,
2) Soundcard calibration - not yet implemented for all modes but will be in
the first public beta, this really is needed for wider modes such as MT63
and 2k Olivia.
3) Improved waterfall with a zoom feature, I find that I need this
OK,
One thing I want to write while on holiday (!) is a simple soundcard
server - this way DM780 (and other programs) can select the soundcard used
on the remote server, adjust volume levels and get the data.
It'll be a TCP stream, no compression, nothing. Myself I use 16 bit
resolution so
to be an option?
de Laurie, VK3AMA
Simon (HB9DRV) wrote:
Hi,
Off the top of my head:
1) Smoother UI - less cluttered,
2) Soundcard calibration - not yet implemented for all modes but will be in
the first public beta, this really is needed for wider modes such as MT63
and 2k Olivia.
3
Just like the last pre-maunder minimum cycle :-( although that data is not
too exact.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: n...@tampabay.rr.com
Solar cycle 23 is
now 13 years long from first spot to present one, an extension of the
already record
Cool - I've had snow here for seven (yes 7) months! Any more and I'm heading
to France :)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Thomas Giella n...@tampabay.rr.com
Simon anecdotal evidence is pointing towards a Dalton Minimum
Would not WINMOR be an option here?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Tony
It would be a neat to see some kind of throughput sensing where the speed
of the mode changed to suit conditions automatically.
Look at the WINMOR specs and coding - at the moment this may be the
solution.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: David dokr...@usa.net
Where am I going with this? Why do we have to wait for someone to invent
the better mouse trap? We can design
- Original Message -
From: David dokr...@usa.net
We can design it as a community.
There are a couple of Ham Radio community projects I follow which have
collapsed or at least stopped moving forwards simply because they are
community projects where the problems with self-elected
USB
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: ronaldfparmenter ronaldfparmen...@yahoo.com
what mode do i use on 14.230 mz for sstv ???
I've just looked at Vojtech's code, it seems reasonable *and* he's
resampling from 8kHz up to 11.025kHz.
If I can get this working (and why not!) then I suggest we attempt to for a
standard for the RSID codes similar to the SSTV VIS codes, maybe even
storing the standard in this forum.
This
No - it's sent in the center frequency and indicates the mode being used.
For robustness it could be sent a few times maybe...
If you can't decode the RS ID then you'll probably not decode the mode being
used anyway.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
What do other developers think about the Definitive List of RS-ID codes
being maintained here? I suggest all programs should display this list if
requested by the user together with the version number.
I'll be away on holiday for two weeks and will try to get the code working
while I'm away. I
- Original Message -
From: Patrick Lindecker f6...@free.fr
The best way would be that some digital association manages this (as for
the
SSTV codes, however I don't know who manages this SSTV list...) .
No-one, as far as I know I'm the only person writing / maintaining SSTV
code.
Yes, DM780 can send these small pics.
Simon HB9DRV
www.ham-radio-deluxe.com www.sdr-radio.com
--
From: Andrew O'Brien k3uka...@gmail.com
Multipsk can do it, I assume the others can.
I hope to have this in DM780 by the end of June 2009. I think it should be
enabled by default when calling CQ on exotic modes - I need to think about
this, anyway I'm sure my user will tell me what to do :)
Simon HB9DRV
www.ham-radio-deluxe.com www.sdr-radio.com
Wait until you try windows 7 -much faster than VISTA and a pleasure to use.
Simon HB9DRV
www.ham-radio-deluxe.com www.sdr-radio.com
From: doug_helbling
the performance boost I get from Linux is outstanding and FLDigi is very well
behaved on my system.
Hi All (especially Patrick),
I've been adding the excellent RSID to DM780 using Dave fldigi / Vojtech's
PocketDigi code.
Patrick - when you design RSID version 2 (or however it'll be called) please
can the digi-mode authors work with you to agree a common set of codes and
sub-modes?
Simon
I'm adding these Olivia derrivates to DM780, I'm interested in knowing whether
they are used much?
Simon HB9DRV
www.ham-radio-deluxe.com www.sdr-radio.com
to be sure I implement Contestia and RTTYM correctly. I
don't have mixW and don't use it less i get accussed of plagiarism and lawyers
start hunting me (yes, it has happened before).
Simon HB9DRV
www.ham-radio-deluxe.com www.sdr-radio.com
Hi Vojtech,
I didn't know that PocketDigi ran on Windows XP etc. - I also clean forgot
about MultiPSK (sorry Patrick).
I saw your Contestia / RTTYM implementation - quite simple really (once
someone's already done the hard work).
Simon HB9DRV
www.ham-radio-deluxe.com www.sdr-radio.com
This is where Patrick's RSID idea will help, I'm adding it to DM780 and maybe
the MixW developer(s) could add it?
Patrick - how does the RSID sensitivity / robustness compare to Olivia? Would
there be any point in sending the RSID twice?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
-
Thanks Patrick,
Good valuable information.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Patrick Lindecker
My RS ID measures are the following:
* the first RS ID decoding happens at S/N=-18 dB,
* at S/N=-13 dB the RS ID decoding is almost
Yes please - this would save me a lot of time, maybe a couple of Contestia
and RTTYM?
Please send to si...@hb9drv.ch, I hope to have Contestia and RTTYM working
next week, currently got a lot to get organised here.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
Hi All,
Tony sent me a fine set of wave files so I'll be able to do what I need to
do.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Tony d...@optonline.net
As Patrick mentioned, the RSID is very sensitive. Multipsk was able to
detect the ID down to -25db
-deluxe.com
- Original Message -
From: Simon (HB9DRV) simon.br...@kns.ch
Please send to si...@hb9drv.ch, I hope to have Contestia and RTTYM working
next week, currently got a lot to get organised here.
Maybe no need - cycle 24 has started now :)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andy obrien k3uka...@gmail.com
Time to start using Contestia again ?
Just shows what an excellent engineer Pawel is (Pawel designed Olivia and MT63
and had a part to play in PSK with slowbpsk).
Also I would have sent the PSK using lowercase - it's faster, less bits per
character and hence more robust.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
-
PSK lowercase will be interesting, as *everyone* on this list knows lowercase
PSK is faster and more robust, yet many Hams send everything in uppercase -
calling CQ DX in uppercase is just - daft :)
FWIW The only difference between Contestia / RTTYM and Olivia is that Olivia is
a 7-bit char
As has been mentioned before, the best way to get the various flavours of
ALE400 added to the various digital programs we use is to make source code
available, failing that a good spec.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andy obrien
This is where a combination of Patrick's RSID idea (also in fldigi and DM780
5.0 and PocketDigi) and SDR will help.
On July 1st I want to start writing my own Windows SDR console, initially for
SoftRock and later other SDR radios. Instead of monitoring ~3kHz as at present
we'll be able to
A good HF radio +6m is the 100W Kenwood TS-480SAT - you can pick this up
second-hand. It is a very good performer and an excellent HF radio for
digital in general. Also the IC-703+ which is 10W and no mean machine.
As for VHF / UHF I'll let others make suggestions.
Simon Brown, HB9DRV
Hi,
I'm working on at least a million lines of code in various Ham projects -
the easiest way for me to add a new mode is if I have the source. Patrick
writes in Pascal, myself in C++.
To be honest I see Olivia and MT63 as the most reliable modes out there.
Simon Brown, HB9DRV
When the C++ code is available I'll take a look for sure :)
I understand not shipping your code if it's mixed up elsewhere.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Patrick Lindecker
... is developping a C++ code for ALE, which will be available
I have an idea that some very early FT-847 had different CAT control and
needed an EPROM upgrade - or was this the FT-920?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien k3uka...@gmail.com
Did you match the baud rate in the FT-847 to same baud
- Original Message -
From: Jens Petersen oz...@c.dk
...when the new HRD/DM780 comes out with calibration I'm looking forward
to switching back so I can hopefully program some macros in DM780 to QSY
to 1500Hz waterfall and dump the filter from 3KHz to 150Hz with a single
button
Please look at http://www.hb9drv.ch/tmp/pics/OddMode.jpg
What mode is this?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
Hi Doug,
Try Windows 7 - it really is a smooth OS. It is fast - I use it on my little
ASUS EEE PC 1000H with HRD/DM780 and it really performs.
HRD/DM780 will not work with WINE I am afraid, I wish I had time for the
debugging.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original
To answer my own question, here in Switzerland 6m is alive with PSK31. G0RVM
and G4LAA seem to be working all around Europe, G4LAA transmitting a
beautifully clean signal. All this on 50.250MHz.
http://www.hrdlog.net/ViewLogbook.aspx?user=HB9DRV
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
Why not? ICOM sponsors the RSGB HF Convention, other companies sponsor
various aspects of the hobby.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien k3uka...@gmail.com
...but a contest sponsored by a interface company that gives the
One way to know which digital modes are most used would be a eQSL.cc (or maybe
LOTW) logbook query.
Also Europe / Asia may differ from the US. Here in Switzerland on 20m I'm
seeing PSK / MFSK / Hell / RTTY / JT65 every day.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message
USB, for example 14.230 MHz USB
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: ronaldfparmenter ronaldfparmen...@yahoo.com
what mode do i set too for sstv ??
Had a few QSO's on 6m 50.250MHz. Everyone using PSK31 - would have thought
PSK63 / PSK125 would be more sensible myself.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
Just keep a memory stick with a Windows installation. These are now so cheap
they make a good solution for netbook-portable.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien k3uka...@gmail.com
I had a PC problem last night and Windows would not
FWIW with the exception of laptops I always run RAID 1 (mirror). I've had
disks die but never lost data as a result in far too many years of coding.
http://www.bestpricecomputers.co.uk/glossary/raid-1.htm
Some laptops support RAID 1 but none of mine...
Simon Brown, HB9DRV
Hi Andy,
Is there any likelihood of future MixW development, for example adding
Patrick's RSID or CALL-ID features? I get asked this myself and can't answer
as I'm not on any MixW mailing lists.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andrew O'Brien
Hi,
It's good to hear Nick is better - long time no news.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Andy obrien k3uka...@gmail.com
Nothing that I have heard. Nick is somewhat more active, as his
health has improved, but I hear that the focus of Mixw
MixW has (I think) support for the data modes used by satellites - that's
one thing I would like to support.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: jhaynesatalumni jhhay...@earthlink.net
What am I missing?
Being as fair as I can I suggest that this is not an over-driven signal,
he's just strong. DM780 5.0's enhancement option will really help as would a
500Hz filter in the 450 if possible.
If you're thinking about a new radio look at the TS-480SAT - IMO the best
digital-mode radio.
Simon Brown,
Hi,
Keep an eye out for a second-hand 480SAT - I've heard of them going for ~
$500.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: frankk2ncc frank.k2...@gmail.com
The 480SAT is certainly a fine rig, as Rob, AA6A would attest, but another
rig is about
Hi,
Quite simple: I'll explain offline to yourself and Dave W1HKJ very soon.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Vojtech Bubnik bubn...@seznam.cz
Hi Simon.
The enhancement looks very interesting. How do you do that?
BTW, I was trying to achieve
If you don't have a serial port then consider the USInterface.com Navigator
or the microHam USB III, both fine pieces of *external* hardware.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: lsumners lsumn...@yahoo.com
I am looking at upgrading my Dell on board
- Original Message -
From: WR5J
The second feature would be adding ALE-400 as implemented in MULTIPSK. It
is looking like one heck of a mode.
I agree here, I would also like to see source for the data modes used by
satellites. I would also like to find time to understand and
Simply put - yes, more than enough CPU. Myself I have the model with a 160GB
disk.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: J. Moen
That is a good price. I wonder if it has enough computer power for some of
the powerful digital mode programs.
Hi All,
I would like to give a big thumbs-up to the microHam USB Interface III - I've
just set it up with my TS-480SAT, DELL M1330 laptop and HRD software for 6m
digital operation. The microHam is idiot-proof and working nicely.
It was a pleasure to meet Jozef from microHam at the
Yes, it's using the microHam router and I sent Jozef a suggestion for making
the installation simpler.
I understand what he's doing, for those of us who just want a COM port for
CAT control the installation guide could be a bit simpler.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
-
FWIW in Europe you'll see plenty of PSK31 on 50.250MHz, on Thursday I saw at
least 36 stations in 17 countries (I use a TS-480SAT and 5/8 vertical). I've
also heard some RTTY on about 50.195MHz.
Callsign Time Band Country
EA8ACW/P 17:34 6mAF Canary
FWIW the router is really just a service - and the driver runs as a service
anyway (all drivers do). I think the microHam solution is actually rather
good.
I'm using it for HRD (CAT) and DM780 (soundcard) on 6m. When the 6m season
is over I'll probably run it on 30m / 17m.
Simon Brown, HB9DRV
It's only a beta - the first public one!
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Tony d...@optonline.net
Ham Radio Deluxe version 5 is available. The new version has RSID,
Contestia
mode and lots more.
Andy,
Let's talk about this. It's a tad early at the moment, must shower, walk
dogs, need coffee, lots of coffee.
Using Patrick's RSID idea there's a lot we can do, in brief:
1) I agree - it's not needed for PSK31 also it's wider than PSK31, with RTTY
I would suggest not using it with 45.45
Hi,
For Andy K3UK: I suggest you run any text through me / Dave W1HKJ to check it :)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Ford, Steve, WB8IMY
I'd definitely be interested, Andy.
It's an option:
Program Options / QSO / Keep on top while sending
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Tony d...@optonline.net
Noticed I can't multitask when CQ'ing / transmitting with the latest
version
of HRD / DM780. I'm using Vista and was
3KB or 3MB :) ?
Send to me please, I'll wack it on my website.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Tony d...@optonline.net
Made a short video of DM780 decoding RSID. I can send the file (3KB) if
anyone would like to see it.
Look at the microHam USB Interface III - soundcard and CAT in one package, I
have one and use it with my own TS-480SAT.
http://www.microham-usa.com/Products/USB3.html
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Gmail - Kevin, Natalia, Stacey Rochelle
- Original Message -
From: Joe Veldhuis kd8...@gmail.com
To: digitalradio@yahoogroups.com
Sent: Sunday, July 12, 2009 12:34 PM
Subject: Re: [digitalradio] Possible Purchase
I continue to be puzzled as to why anyone would spend more than $50 on a
soundcard and/or CAT interface, when
Hi,
Which build of DM780? There was a bug which is now fixed.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: ac0mj ac0mj@gmail.com
I have a question about the drift in Digital Master 780. I am sending out
CQs in RTTY this morning on 20m and noticed as
- Original Message -
From: mikea mi...@mikea.ath.cx
I'll bet that you have AFC turned on, and that the frequency is drifting
because of AFC.
There's an option in DM780 to show the RF frequency + AF frequency, does
this make sense?
In the v5.0 betas it's in Tools, Program Options,
Hi,
Am watching 10m for any Sporadic-E PSK31 / digital - I assume the correct
frequency is still 28.120MHz?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
1Hz tuning,
IF DSP not desirable for digital modes,
Rock-solid stable,
Remote-mount the radio head next to your monitor,
Excellent value for money (especially the 100watt version) - it's a Kenwood!
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Stelios Bounanos
Hah,
Actually the 480 does have nice 500Hz filters so you can use this for
getting rid of signals. The beauty of the TS-480SAT is that it's a pure
analogue radio, the audio is good and pleasant to listen to.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From:
Just wait for HRD 6.0 with SDR console support :)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: phil williams ka1...@gmail.com
The RSID experience is still positive on this one. Most notable, is the
presence of the recent release of DRM 780 on the bands.
- Original Message -
From: mikea mi...@mikea.ath.cx
SDR console support as in HRD 6.0 will drive my RFSpace SDR-IQ, display
and demodulate spectrum from it?
Yes
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
The DM780 DominoEX is the same as FLDIGI as the code was 'borrowed' from the
fldigi sources.
Off the top of my head I can't remember about FEC.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
Subject: Re: [digitalradio] More RSID - PLEASE!
I have a question for the
This idea was originally developed by Patrick Lindecker, F6CTE. The
Reed-Solomon ID (RSID) is a short 16-tone MFSK transmission which identifies
the mode in use. The RSID transmission is about 180Hz wide and lasts for
just less than two seconds. You should enable RSID when using an 'exotic'
1 - 100 of 171 matches
Mail list logo
