Thanks to Stef n Brian I was finaly able to get a good print out... And yes it
is 3 am right now lol...
Sliver PLA
Single layer blue tape (double layer causes tape to lift)
G9 set to 175.3
I just need to complete the top piece which for some reason the guy who
designed it made the stl file on the
mkozakew...@icosidodecahedron.com> wrote:
>>
>>> Looks like you guys need to put a BitCoin QR code on the cup, so
>>> there’s less cash bills!
>>>
>>> *From:* Ace Tunes
>>> *Sent:* Tuesday, January 7, 2014 9:11 PM
>>> *To:* discuss@lists.sk
On Wed, Jan 8, 2014 at 1:55 AM, Michael K <
> mkozakew...@icosidodecahedron.com> wrote:
>
>> Looks like you guys need to put a BitCoin QR code on the cup, so
>> there’s less cash bills!
>>
>> *From:* Ace Tunes
>> *Sent:* Tuesday, January 7, 2014 9:11 PM
>> *To
QR code on the cup, so
> there’s less cash bills!
>
> *From:* Ace Tunes
> *Sent:* Tuesday, January 7, 2014 9:11 PM
> *To:* discuss@lists.skullspace.ca
> *Subject:* Re: [SkullSpace-Discuss] 3D printer money
>
>
> Sounds fine to me.
> On Jan 7, 2014 6:44 PM, "Alex
Looks like you guys need to put a BitCoin QR code on the cup, so there’s less
cash bills!
From: Ace Tunes
Sent: Tuesday, January 7, 2014 9:11 PM
To: discuss@lists.skullspace.ca
Subject: Re: [SkullSpace-Discuss] 3D printer money
Sounds fine to me.
On Jan 7, 2014 6:44 PM, "Alex Weber&qu
Sounds fine to me.
On Jan 7, 2014 6:44 PM, "Alex Weber" wrote:
> Hey guys,
>
> I took a bunch of the money (mostly the big bills) from the 3D printer cup
> and put it into the cash box.
>
> It was quite a bit of money and I was worried about it getting stolen or
> whatever. If you want to buy fil
Hey guys,
I took a bunch of the money (mostly the big bills) from the 3D printer cup and
put it into the cash box.
It was quite a bit of money and I was worried about it getting stolen or
whatever. If you want to buy filament let a board member know and we'll get the
money to you.
If this is
Well I think there something that needs tweaking I'm not sure what it is but
man this part came out terrible, infill OS garbage and looks like its not
layering correctly.
Cheers!!
___
SkullSpace Discuss Mailing List
Help: http://www.skullspace.ca/wiki/
20, 2013 at 8:51 PM, Brian Kulyk
>> wrote:
>>
>>
>> I think we can change the z-axis end stop to be at the bottom instead of
>> the top, but it will require firmware changes. We can discuss this on
>> Tuesday.
>>
>>
>> Brian Kulyk204.887.6988
&
gt;>>
>>>> My guess is that the head needs to go so close that its hard to have a
>>>> safety switch/sensor that didn't give false positives.
>>>>
>>>> It'd be nice to have some sort of proximity sensor though. Maybe get some
>>>>
x27;d be nice to have some sort of proximity sensor though. Maybe get some
> fancy auto-levelling business going.
>
> --
> Edwin (on the move)
>
> On 2013-10-19, at 2:33 PM, cstann...@gmail.com wrote:
>
>
> I especially don't get why the design doesn't have a
gt;
>>>> I especially don't get why the design doesn't have a sensor at the
>>> bottom to stop the head before it rams into the table - I wonder why the
>>> (Mendelbot?) engineers didn't add one in. We could probably make one.
&
n doesn't have a sensor at the
>> bottom to stop the head before it rams into the table - I wonder why the
>> (Mendelbot?) engineers didn't add one in. We could probably make one.
>> >
>> >
>> > -Original Message-----
>>
t;
> > -Original Message-
> > From: Ian Trump
> > Sender: discuss-bounces@lists.skullspace.caDate: Sat, 19 Oct 2013
> 19:22:47
> > To: discuss@lists.skullspace.ca
> > Reply-To: discuss@lists.skullspace.ca
> > Subject: Re: [SkullSpace-Discuss] 3d printer
> >
Original Message-
> From: Ian Trump
> Sender: discuss-bounces@lists.skullspace.caDate: Sat, 19 Oct 2013 19:22:47
> To: discuss@lists.skullspace.ca
> Reply-To: discuss@lists.skullspace.ca
> Subject: Re: [SkullSpace-Discuss] 3d printer
>
> __
discuss-bounces@lists.skullspace.caDate: Sat, 19 Oct 2013 19:22:47
To: discuss@lists.skullspace.ca
Reply-To: discuss@lists.skullspace.ca
Subject: Re: [SkullSpace-Discuss] 3d printer
___
SkullSpace Discuss Mailing List
Help: http://www.skullspace.ca/wiki/index.php/Maili
o: Discuss SkullSpace
mailto:discuss@lists.skullspace.ca>>
Date: Friday, 18 October, 2013 23:11
To: Discuss SkullSpace
mailto:discuss@lists.skullspace.ca>>
Subject: [SkullSpace-Discuss] 3d printer
I am banning myself from the 3d printer right now. I managed to broke the glass
on the 3D printer
I am banning myself from the 3d printer right now. I managed to broke the
glass on the 3D printer after the head jam into it. I've checked the
leveler and print head and they seem ok. Thor, let me know where you got
the glass from and I'll go get a replacement ASAP.
Sorry
_
The dollar stores downtown have/had decent sized and quality microfibres cloths.
Not sure why this post brought that to mind.
--
Sean
> On Oct 14, 2013, at 11:03 AM, d-_-b wrote:
>
> tl;dr - We can now print PLA on bare, heated glass. ( and it is much much
> easier than dealing with kapto
tl;dr - We can now print PLA on bare, heated glass. ( and it is much
much easier than dealing with kapton ).
Stef and I worked last night to find settings that would allow us to
print PLA directly on a heated glass surface. After several false starts,
I believe we may have tweaked the s
Not exactly sure. Was thinking 6-7, but I could go earlier. Let me know
when you would like to make your escape and I can aim to be at the space
around then.
On 2013-10-13 2:35 PM, "d-_-b" wrote:
> What time do you intend to go down? I have a family dinner, but could use
> an excuse to chow-n-ru
What time do you intend to go down? I have a family dinner, but could use
an excuse to chow-n-run.
On Sun, Oct 13, 2013 at 2:03 PM, Stefan H.A wrote:
> Considering we are almost out of kapton tape and pla can be printed
> straight onto warm glass maybe we should swap out the glass for the one
Considering we are almost out of kapton tape and pla can be printed
straight onto warm glass maybe we should swap out the glass for the one
Thor brought in.
As far as cleaning the nozzle I find the best way is to carefully wipe it
with paper towel or gently scrape with a small screwdriver while it
k sorry
Brian Kulyk
204.887.6988
On Sun, Oct 13, 2013 at 11:20 AM, d-_-b wrote:
> Re-read my numbers.
>
>
> On Sun, Oct 13, 2013 at 11:04 AM, Brian Kulyk wrote:
>
>> If 174.6 is too high, and you are having trouble getting the first layer
>> to stick, then changing it to 174.5 will raise the
Re-read my numbers.
On Sun, Oct 13, 2013 at 11:04 AM, Brian Kulyk wrote:
> If 174.6 is too high, and you are having trouble getting the first layer
> to stick, then changing it to 174.5 will raise the print head off of the
> glass by an additional .1mm making it stick even worse, and 174.4 woul
If 174.6 is too high, and you are having trouble getting the first layer to
stick, then changing it to 174.5 will raise the print head off of the glass
by an additional .1mm making it stick even worse, and 174.4 would be worse
yet. I think what you want is to move in the other direction, 174.7 wi
tl;dr -- Kapton needs judicious replacement, Thor needs help cleaning
the tip.
The tape does indeed need replacing. There are a couple tracks
through the kapton from the head sliding while pressed down, but they do
not interfere with objects printed at the center of the print bed. As th
I reduced the height by .1mm because I was having issues with prints
releasing from the bed half way through. I did a number of prints
successfully after that though. As Brian said the height changed after we
changed the z axis end stop and the command is g92 not g2. We did that to
give the operat
I think that's too large of a number, the correct height is now (after
installing the mechanical switch) something like 174.6. The exact value can
be found by looking at the custom gcode settings in slider.
You should not have to be entering this code manually, did you reuse a
gcode file, that was
yeah they did. I did the emergency switch off (i.e. pulling the usb
cable) but not before the head touched the bed. It did start from top
though so maybe the point at which it prints needs tweaking? Tried g2
z184 (?) also but still the same result.
On 10/10/13, Alex Weber wrote:
> Has Stef, Brian
Has Stef, Brian, or Thor shown you how to use it? There's quite a bit that
goes into operating the printer correctly.
On Thu, Oct 10, 2013 at 7:42 PM, Ric Lim wrote:
> I've tried printing on the 3D printer tonight and the head keeps touching
> the bed so the strips were scratch in the lower lef
I've tried printing on the 3D printer tonight and the head keeps touching
the bed so the strips were scratch in the lower left part.
___
SkullSpace Discuss Mailing List
Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
Archive: https://gr
So cool!
On Wed, Aug 7, 2013 at 11:15 AM, Aemilianus Kehler wrote:
> Swwweett!
>
> Cheers!!
>
> On Aug 7, 2013, at 12:23 AM, Jim MacKenzie wrote:
>
> All the way.
> On Aug 7, 2013 12:22 AM, "Justin Lacko" wrote:
>
>> That's awesome! Did it glide far?
>>
>>
>> On 6 August 2013 23:51, Jim M
Swwweett!
Cheers!!
On Aug 7, 2013, at 12:23 AM, Jim MacKenzie wrote:
> All the way.
>
> On Aug 7, 2013 12:22 AM, "Justin Lacko" wrote:
> That's awesome! Did it glide far?
>
>
> On 6 August 2013 23:51, Jim MacKenzie wrote:
> Today Stefen did some lessons on 3d printing. After some sampl
All the way.
On Aug 7, 2013 12:22 AM, "Justin Lacko" wrote:
> That's awesome! Did it glide far?
>
>
> On 6 August 2013 23:51, Jim MacKenzie wrote:
>
>> Today Stefen did some lessons on 3d printing. After some samples and
>> boring stuff. We printed a glider. It was pretty amazing. I've got some
That's awesome! Did it glide far?
On 6 August 2013 23:51, Jim MacKenzie wrote:
> Today Stefen did some lessons on 3d printing. After some samples and
> boring stuff. We printed a glider. It was pretty amazing. I've got some
> photos
>
> ___
> SkullSpa
That’s how I got mine!
From: Roswyne
Sent: Wednesday, July 17, 2013 2:33 PM
To: Skull Space Discussion List
Subject: Re: [SkullSpace-Discuss] 3D printer test
If you ever want to use the vending machine at AW, post here: surely with all
the joint members, someone could help get you through the
Adafruit used to have a deal that if your ordered a certain amount you
would get a free pi
On Jul 17, 2013 2:33 PM, "Roswyne" wrote:
> If you ever want to use the vending machine at AW, post here: surely with
> all the joint members, someone could help get you through the doors. :)
>
> Alternatel
If you ever want to use the vending machine at AW, post here: surely with
all the joint members, someone could help get you through the doors. :)
Alternately, maybe other people would be interested in placing a group
order. It wouldn't have to be all rpis, it could be anything from a vendor
to hit
Let me know when/if you do, I would like to see it. Might finally get me to buy
one... Not like money's an issue, more just time, never seem to have to go out
to any place that sells the dang thing... If only we had a vending machine such
as accent works Sigh
Cheers!!
On Jul 16, 2013, at 4
I'd love to have a chance to print a Raspberry Pi case.
On Mon, Jul 15, 2013 at 10:30 PM, Jim MacKenzie wrote:
> I've also got a mech from a game I bought that I want to print
> I don't think the printer Is ready yet though.
> On Jul 15, 2013 10:15 PM, "Ric Lim" wrote:
>
>> I got an STL file f
I've also got a mech from a game I bought that I want to print
I don't think the printer Is ready yet though.
On Jul 15, 2013 10:15 PM, "Ric Lim" wrote:
> I got an STL file for 3D model of a Dinosaur. Can I try it out on our
> printer?
> ___
> SkullSpac
I got an STL file for 3D model of a Dinosaur. Can I try it out on our printer?
___
SkullSpace Discuss Mailing List
Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
Archive: https://groups.google.com/group/skullspace-discuss-archive/
Sorry, by 'raw' I meant the ones he uploaded to Youtube, not the raw raw
ones.
Ron
On 2013-04-26 15:37, Stefan H.A wrote:
> I'm not too keen on having the raw videos posted. Nooone wants to here us
> babbling away in the background. If you like I can make a video of a print
> and keep my mouth sh
We know the price per kg and the software tells us how many mm per print.
So we need to know the price per mm so we can calculate the price per print.
On 2013-04-26 4:09 PM, "Aemilianus Kehler" wrote:
> So first we have to calculate weight per mm, then you can calculate the
> price per mm?
>
> Ch
So first we have to calculate weight per mm, then you can calculate the price
per mm?
Cheers!!
On Apr 26, 2013, at 3:37 PM, "Stefan H.A" wrote:
> I'm not too keen on having the raw videos posted. Nooone wants to here us
> babbling away in the background. If you like I can make a video of a pr
I'm not too keen on having the raw videos posted. Nooone wants to here us
babbling away in the background. If you like I can make a video of a print
and keep my mouth shut while it is printing. This thing makes some pretty
awesome noises.
Ben- Right, pricing. I forgot about that. I can bring a sca
tre Inc.
> >>
> >> -Original Message-
> >> From: Andrew Orr
> >> Sender: discuss-bounces@lists.skullspace.caDate: Fri, 26 Apr 2013 14:54:01
> >> To: Skull Space Discussion List
> >> Reply-To: discuss@lists.skullspace.ca
> >> Subjec
ild
>> Ralph Brown Community Centre Inc.
>>
>> -Original Message-
>> From: Andrew Orr
>> Sender: discuss-bounces@lists.skullspace.caDate: Fri, 26 Apr 2013 14:54:01
>> To: Skull Space Discussion List
>> Reply-To: discuss@lists.skullspace.ca
>>
---Original Message-
> From: Andrew Orr
> Sender: discuss-bounces@lists.skullspace.caDate: Fri, 26 Apr 2013 14:54:01
> To: Skull Space Discussion List
> Reply-To: discuss@lists.skullspace.ca
> Subject: [SkullSpace-Discuss] 3d printer videos
>
>
Can you get me the raw videos somehow so I can put them on our vimeo
account?
Or, can I just send you the Vimeo creds so you can do it? :)
Ron
On 2013-04-26 14:54, Andrew Orr wrote:
> So we managed to get the 3d printer actually printing last night, here's a
> few videos of the first calibration
: Skull Space Discussion List
Reply-To: discuss@lists.skullspace.ca
Subject: [SkullSpace-Discuss] 3d printer videos
___
SkullSpace Discuss Mailing List
Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
Archive: https://groups.google.com
So we managed to get the 3d printer actually printing last night, here's a
few videos of the first calibration prints (sped up 3x actual):
first: https://www.youtube.com/watch?v=Rpf4vh70gRc
second: https://www.youtube.com/watch?v=sM34NYqx5jA
There's still much work to be done before it's ready t
When we ordered our 3D printer, I asked if anyone wanted to chip in for
some starter filament. The plan is for anyone using the printer to pay per
print on the honour system, much like the drink machine, but we need to get
some stock to start with.
The guy that we were originally thinking of buyin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
As I mentioned in the meeting, when we initially ordered it I got a
bunch of emails from them. I haven't heard anything since. No shipping
details or mysterious packages.
I'll give it a week or two, then get in touch and see what's going on.
Ron
On
If memory serves, our printer was supposed to ship yesterday. Have there
been any updates? If not, has there been any indication that the order went
through i.e., has Ron's credit card been billed? If it did ship yesterday
there is slight possibility that we could have by this weekend.
P.s. I coul
MendelMax 2.0:
http://store.makerstoolworks.com/printer-kits/mendelmax-2-0-beta-kit/
On Wed, Feb 13, 2013 at 9:36 AM, Justin Lacko wrote:
> I wasn't at yesterday's meeting. Which 3D printer did we settle on?
>
>
> On 12 February 2013 19:12, Benjamin Bergman wrote:
>
>> The 3D printer has been
I wasn't at yesterday's meeting. Which 3D printer did we settle on?
On 12 February 2013 19:12, Benjamin Bergman wrote:
> The 3D printer has been ordered! Their estimated shipping date is March
> 4th. In the meantime, we need some plastic filament. I was planning on
> buying some of the plastic
Just some clarification, the filament originally offered to us is on the
wiki at the bottom of the 3D printer page. I'm just waiting on confirmation
that the list is still accurate, and I will update it if it is not.
http://www.skullspace.ca/wiki/index.php/3d_printer#Original_option:_Used_.28local
The 3D printer has been ordered! Their estimated shipping date is March
4th. In the meantime, we need some plastic filament. I was planning on
buying some of the plastic offered to us in the used printer deal to seed
our pay-per-use setup. There were a couple other people that were
interested in ch
Hey everybody,
We're now $60 short of our goal for the 3d printer! And that $60 was to
cover our asses for customs, so it may not even be required.
If you've pledged money, please get it to me ASAP (either bring it to
the meeting tomorrow, leave it in the mailbox with your name on it, or
bring it
61 matches
Mail list logo
