I too have been using Material but I cant see that being the cause BUT
when my player went to zero I didnt notice the fact in Material for
some while. I clicked pause, I clicked play, I powered my amp off and on
and did a fair bit more head scratching before I noticed 0% in
Material.
As a bi pro
chill wrote:
> Wracking my brain for other 'new' things that might be responsible..
With the exception of increased reliance on Material Skin and the
Android-app version of it (phones, Kindle Fire) as well as keeping my
LMS up to date nothing has changed in my setup in ages that I can think
of!
philippe_44 wrote:
> UPnP players does not have the capability to change volume unless
> players have volume sync in which case it's normal LMS behavior when
> volume changes
I only mentioned it as I was doing A/B tests the other day with a synced
Pi, DAC32 and Upnp player all through a Denon Ce
d6jg wrote:
> I asked about other players as I have seen it when using a upnp player
> and switching back to a Pi
UPnP players does not have the capability to change volume unless
players have volume sync in which case it's normal LMS behavior when
volume changes
LMS 8.1.x on Odroid-C4 - *Sq
the_arm wrote:
> I'm happy to do the same - any advice on what I should enable to capture
> the info?
I've also enabled Debug logging for the three 'control.' logs, and the
three 'player.streaming' logs.
chill's Profile:
d6jg wrote:
> I asked about other players as I have seen it when using a upnp player
> and switching back to a Pi
Ah, ok - I don't have any upnp players. My two pCPs both have the
latest Squeezelite which I believe was released to fix an issue with
inverted audio and the new balance control.
d6jg wrote:
> I asked about other players as I have seen it when using a upnp player
> and switching back to a Pi
Got it. I don't have any non-branded-oldschool-logitech players on my
network. (Yet!). 1 Boom, 3 Radios, 1 Squeezebox3, 1 Receiver and 1
Touch.
---
I asked about other players as I have seen it when using a upnp player
and switching back to a Pi
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s
*Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
*Dining Room* SB Boom
*Kit
chill wrote:
> Actually that's not true - I have noticed it once or twice during
> playback. I wasn't anywhere near any of the controls, and the volume
> just reduced without me doing anything. I assumed the radio station had
> accidentally turned the playback volume down.
Good point, and I h
the_arm wrote:
> I'm happy to do the same - any advice on what I should enable to capture
> the info?
Not really! There are a lot of logging options, and I have no idea
which ones would show a volume change. I've set player.sync to Debug.
I'll keep looking.
I'm happy to do the same - any advice on what I should enable to capture
the info?
the_arm's Profile: http://forums.slimdevices.com/member.php?userid=9891
View this thread: http://forums.slimdevices.com/showthread.php?t=11
chill wrote:
> That's exactly what I'm experiencing too.
>
Actually that's not true - I have noticed it once or twice during
playback. I wasn't anywhere near any of the controls, and the volume
just reduced without me doing anything. I assumed the radio station had
accidentally turned the pl
the_arm wrote:
> It's never happened to me during playback but it just seems that
> randomly I'll come back to the group, hit play, and two players "work"
> and the touch is at zero volume.
>
That's exactly what I'm experiencing too.
I do also have three Jogglers around the house running Jive
Wow, hey, I've been noticing the same thing! I have a sync group
consisting of one SB Touch, one SB Radio, and one SB Duet-Receiver.
It's always the SB Touch that is spontaneously at 0 volume. It's never
happened to me during playback but it just seems that randomly I'll come
back to the group,
Two Booms and two pCPs.
chill's Profile: http://forums.slimdevices.com/member.php?userid=10839
View this thread: http://forums.slimdevices.com/showthread.php?t=114230
___
discus
What else is in the sync group?
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s
*Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
*Dining Room* SB Boom
*Kitchen* UE Radio (upgraded to SB Radio)
*Bedroom (Bedside)* Pi Zero+
In my Living Room HiFi I have a Pi4 with a Khadas Tone Board. The latter
is a highly respected USB DAC capable of 32bit etc far beyond anything
you can currently throw at it. The Pi runs piCorePlayer and they are in
expensive WAF cases. I consider this player to be about as good as you
can get for
For a week or two now I've been experiencing my synced players
spontaneously going quiet without me apparently doing anything. I can't
put my finger on what's causing it. I have a niggling feeling it's
something to do with the DAC32, because it's part of the sync group
that's experiencing the v
I'd recommend you start or join an existing thread for each of your
problems. Throwing them all in one pot will sooner or later lead to only
one being handled. The pCP/Synology issue in particular has been
discussed many times before.
As for Spotty: what does your server.log say? Any trace abo
ModelCitizen wrote:
> Ah. It is an audiophile adaption of the SB3. Mainly it's an upgrade of
> the PSU along Naim lines. I.e is it is very heavy!
> The whole thing comes packaged in two boxes with smoked glass front and
> wooden ends. Very nice it looks too.
>
> It also sounds very good. I had
Paul Webster wrote:
> The current model does not have a display - but you can use any other
> LMS display to control it.
Or any browser or iOS/Android smartphone or tablet app. If you need a
server, consider the matching CORE32:
https://polyvection.com/en/product/core32/
These products are the
See the DAC32 announcement thread - and perhaps this comparison to a
Transporter
https://forums.slimdevices.com/showthread.php?113633-DAC32-low-cost-high-performance-music-streamer&p=1015695&viewfull=1#post1015695
The current model does not have a display - but you can use any other
LMS display
Why not an rPi4B, feeding (via USB) any good quality DAC of your choice?
*Home:* Pi4B-8GB/pCP7.x/4TB>LMS 8.1.x>Transporter, Touch, Boom, Radio
(all ethernet)
*Cottage:* rPi4B-4GB/pCP7.x/4TB>LMS 8.1.x>Touch>Benchmark DAC I, Boom,
Radio w/Battery (Radio WIFI)
*Office:* Win10(64)>foobar2000
*The
Hello.
If anyone can help me I'd be grateful.
I'm recreating a hifi I sold 15 years ago when I moved into a building
site.
I have a problem with the front end though. I used to use a @-tunes
modified SB3 called an SB+ which was good. I also had a Transporter but
did not get along with it.
So
For accessing the Synology NAS - see
https://docs.picoreplayer.org/how-to/add_network_share/
If it does not work after going through those steps then include some
screenshots to show what you have.
For the others ...
It could be a temporary networking issue ... or it could be that the
plugin de
The usual apologies for asking what I am sure to others appear to be
basic questions.
I have been a very grateful user of LMS for a number of years but with
very much a "fit and forget attitude" unless things start to go wrong.
Previously I had LMS running on my nas and my music files are als
edwin2006 wrote:
> What is a SB+?
Ah. It is an audiophile adaption of the SB3. Mainly it's an upgrade of
the PSU along Naim lines. I.e is it is very heavy!
The whole thing comes packaged in two boxes with smoked glass front and
wooden ends. Very nice it looks too.
It also sounds very good. I h
Paul Webster wrote:
> A PM to Patrick Dixon via
> https://pinkfishmedia.net/forum/threads/careful-with-that-moderation-button.214124/#post-3357441
> might work (although his last post there was from 2018)
Thanks Paul. I have now tracked him down on the Art of Sound Forum where
he is still activ
A PM to Patrick Dixon via
https://pinkfishmedia.net/forum/threads/careful-with-that-moderation-button.214124/#post-3357441
might work (although his last post there was from 2018)
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
su
29 matches
Mail list logo
