IMGrant;420515 Wrote:
I think it has been mentioned, but anyway, I think that is only on the
SBC, it doesn't work on the SB2 IR remote that I have.
+1
I can't find any mute function on my SB2s. So I assume that goes for
SB2/SB3/SBClassic - i.e.all the same hardware. It would be very
I've opened a bug: http://bugs.slimdevices.com/show_bug.cgi?id=11973
Also, 'bug 11217' (http://bugs.slimdevices.com/show_bug.cgi?id=11217)
sounds similar, except it is for 7.3.2 and only refers to the CLI.
--
IMGrant
IMGrant;420687 Wrote:
I've opened a bug: http://bugs.slimdevices.com/show_bug.cgi?id=11973
Also, 'bug 11217' (http://bugs.slimdevices.com/show_bug.cgi?id=11217)
sounds similar, except it is for 7.3.2 and only refers to the CLI.
Great. I'm pretty sure these have the same root cause. I've
kdf;44429 Wrote:
On 14-Jul-05, at 8:43 PM, Dave D wrote:
[color=blue]
your other option is to use another .map file (say Custom.map) like
so:
[common]
0 = dead #overwrite default function
0.hold = muting
0.single = numberScroll_0
I tried this and found the mute function does not
I'm a little surprised nobody has mentioned this, but there -is- a mute
function. Press the volume up and down buttons simultaneously. Or at
least, I know this works on the Controller. I don't think I've ever
tried it on a remote. Hmm. Have to give it a shot, but I use the
Controller 90% of the
Dogberry2;420494 Wrote:
I'm a little surprised nobody has mentioned this, but there -is- a mute
function. Press the volume up and down buttons simultaneously. Or at
least, I know this works on the Controller.
I think it has been mentioned, but anyway, I think that is only on the
SBC, it
IMGrant;420427 Wrote:
I tried this and found the mute function does not work quite as I
expected - if I press and hold 0, the SB mutes
...
However, when I hold 0 again, it doesn't un-mute,
...
I have to increase the volume from 0 dB to get the volume back. Anyone
else see this?
Yes,
IMGrant;420518 Wrote:
Does it count as a bug, since it is a hack/plugin?
I believe the mixer muting CLI command is documented, so this is
probably a legitimate bug. If it weren't, you could still open an
Enhancement Request ticket. :-)
-Peter
--
peterw
http://www.tux.org/~peterw/
free
I went ahead and copied the IR folder and the Custom.map file FROm the
Slimserver install to the Squeezecenter folders (under the server
folder). Now .. how can I tell if the .map file will even work, or IF
it is already working? Also .. I would install your (peterw)
ContextMenu plugin, but I'm
Maybe that's the problem. I don't have an IR directory. My old
installation folder for Slimserver (which I no longer use) has an IR
folder, along with a Custom.map file, but my installation folder for SC
7 (C:\Program Files\SqueezeCenter) does not have an IR folder, nor a
Custom.map or a
NFLnut;321068 Wrote:
Maybe that's the problem. I don't have an IR directory. My old
installation folder for Slimserver (which I no longer use) has an IR
folder, along with a Custom.map file, but my installation folder for SC
7 (C:\Program Files\SqueezeCenter) does not have an IR folder, nor
Yeah. I've run several searches on the entire Squeezecenter folder(s)
and there are no .map files there. I also do not have an IR folder in
either the Documents and Settings folder or any of the Squeezecenter
folders. The only place I found an IR folder or the .map file was in
the old (abandoned)
NFLnut;321142 Wrote:
Yeah. I've run several searches on the entire Squeezecenter folder(s)
and there are no .map files there. I also do not have an IR folder in
either the Documents and Settings folder or any of the Squeezecenter
folders. The only place I found an IR folder or the .map file
Since there is no default.map file in Squeezecenter (7), where would I
make the adjustments to a file to get the mute function?
--
NFLnut
NFLnut's Profile: http://forums.slimdevices.com/member.php?userid=13180
View this
NFLnut;320798 Wrote:
Since there is no default.map file in Squeezecenter (7), where would I
make the adjustments to a file to get the mute function?
It's Default.map, and it's in the IR directory.
If you install ContextMenu
(http://forums.slimdevices.com/showthread.php?t=47886), including
Can I add the mute function as detailed above in Squeezecenter? I can't
find the default.map file. Was this changed in Squeezecenter?
--
NFLnut
NFLnut's Profile: http://forums.slimdevices.com/member.php?userid=13180
Patrick Dixon;43253 Wrote:
One reason you may not want to turn the player off is when you are
streaming 'listen again' radio streams. If you stop the stream and
restart, it restarts from the beginning again; which is not that
helpful if you are half way through a 2hr programme!
I'd vote
Muting is great when you have several SB's synced up, too - you might
want to walk into the Living Room and mute it while listening to the
kitchen, or vice-versa.
Another thing is when you have a house full of these, you might want to
mute all (though, yes, Pause WOULD do the same, but hey, work
Hi,
The standard SB3 remote doesn't have a mute button. Is there an IR code
I can use on another remote which would toggle mute on/off? Does SB3
understand mute at all? If not, is there a plug-in which does?
Thanks,
grimholtz
--
grimholtz
'Get PasswordMaker' (https://passwordmaker.org/)
On 7/3/05, rds [EMAIL PROTECTED] wrote:
I'm aware that Stop functionality can be invoked by pressing and
holding the Pause key, but this is not discoverable (i.e. not without
reading the documentation, anyway). I just bought a SqueezeBox2 for my
dad and this is one of the usability issues
Ever since I got my first SqueezeBox, I've wondered why Stop and Mute
buttons were not provided on the remote, especially since there are
three empty key spaces available on the remote. These just seem like
very logical buttons to find on a remote control. Also, if they were
simply overlooked,
21 matches
Mail list logo
