I always use the Windows executable for net-UDAP available here:
http://slim2lirc.myown.mailcan.com/udap_shell_1_0_0.exe
This is much more straightforward for those of us with Windows machines
as it does not require the pre-installation of Perl. Launch the exe and
you are straight into a
A common problem for many people using net-UDAP is that the PC (or
laptop) you are using to configure the Receiver has to be in the same
subnet as the Receiver itself. If the PC/laptop is already connected to
a network and the internet then it will not work.
There is some kind of procedure that
It should fine just being on the same network and subnet, I just stuck
mine into the router and it worked no fuzzing with the pc i using the
bash Shell on My ubuntu desktop .
And disable the firewall !! Completely ! otherwise it would not work at
all .
I solved my problem by doing the following.
use the NET UDAP version 1.0 and not 1.1
launch the command line with an extra argument --local-address=my
laptop IP.
from this point on, everything went fine using the examples of
configurations provided.
thanks for your support.
Thanks for your answers. I am sure it will help me down the road.
To be more precise on the isues I am facing:
1. On the Squeezebox.
I plug in power + ethernet cable into the SB. I press for 6 secs the
front button until it flashes quickly. I pressed it again so it flashes
slowly. However, the
is this real ethernet cables ? not homeplugs or similar, otherwise you
can try with a short cable conected directly to router
Mnyb's Profile: http://forums.slimdevices.com/member.php?userid=4143
View this thread:
Once you have the front light flashing quickly and then release the
button you should not have to press it again. It should fall back to the
slow blink by itself without pressing the button again.
w3wilkes's Profile:
Hi,
I bought 2 duets without controller as I want to control them with my
iphone.
I downloaded and run net UDAP to configure the devices from my laptop.
I connected my laptop and the duet with wire to my router and
disactivated windows firewall on my laptop.
When I run the discover command,
When you press and hold the button on the receiver do you wait until it
fast blinks red before you release the button? You should hold the
button until it fast blinks, then release it, then it will drop back to
a slower blink. You should be ethernet connected to the receiver from
the router and
