I resoldered all the non-SMD pins (mainly connectors/vfd interface) and
i sanded the four sides of the uPC (first remove the square IC from its
PLCC socket off course)
I think the sanding caused my device to work again, but i can't really
tell because i did the soldering and sanding in one go.
g
Hi, I'm having similar problems with my slimp3, (instability,
connection to slim 6.5 occasional, sometimes long enough to play a bar
of music.
Any advice appreciated,
I've pinged the player with 256bytes drops a few, replies in 1 or 2ms
for a few then drops 3or so packets again.
Which p
Thanks for your responses!
I've solved the problem. I resoldered the PCB en sanded the pins of the
PIC uC. I think oxidation on the uC pins was the cause of the trouble.
So anyone with weird problems with a SLIMP3 pointing to defective HW
this is something to check!
--
eflukx
---
On 2/28/06, eflukx <[EMAIL PROTECTED]> wrote:
> Does anybody know the if "real" sourcecode (or
> binary) for the PIC uController have been made available?? (So i can
> flash a new controller)
The source is in Subversion, see
http://svn.slimdevices.com/trunk/slimp3/firmware/ . Note the license
rest
I'm afraid it's a flaky player. I'm running no firewall locally. I was
using this forum as a last resort. Mayb someone has had the same
probs.. Apperently not.
I'll check the player on hardware level: Noise on powersupply. Cold
joints on the PCB. Bad connection on uC socket.
Mayb a faulty uC. Doe
Checked your firewall?
Blocking port 1069/UDP?
--
snarlydwarf
snarlydwarf's Profile: http://forums.slimdevices.com/member.php?userid=1179
View this thread: http://forums.slimdevices.com/showthread.php?t=21447
___
Could be a flaky player. My Slimp3 works fine using 6.22. I ran it for
a long time using 5.4.1, which was a nice, stable release.
--
Pale Blue Ego
Pale Blue Ego's Profile: http://forums.slimdevices.com/member.php?userid=
Yep.
I kept the library very small. Just for testing purposes.
--
eflukx
eflukx's Profile: http://forums.slimdevices.com/member.php?userid=4165
View this thread: http://forums.slimdevices.com/showthread.php?t=21447
