This post won't add much to the thread... but I have an SB3 working
flawlessly on a powerline network using Phonex NeverWire 14 units.
Your Panasonics are newer/faster technology, but the network basics are
the same. Are you running any hardware/software firewalls?
--
NewBuyer
jbrill;151450 Wrote:
The behavior is consistent across any number of outlets. The SB2
connects to the server while the SB3 does not connect to the server
using the same powerline device in the same outlet.
Try wiring the units directly to your switch. That would determine if
the powerline
The behavior is consistent across any number of outlets. The SB2
connects to the server while the SB3 does not connect to the server
using the same powerline device in the same outlet.
--
jbrill
jbrill's Profile:
hi jbrill,
Whenever I have had connection problems it usually ends up being a
10mps/100mps/auto setting issue on one of the components.
regards
--
Greg Erskine
Greg Erskine's Profile:
Since the SB2 and SB3 are virtually identical in hardware and firmware
why not try to re-program the Xilinx in the SB3
Make SB3 has a proper wired connection to the server. Try holding down
the '1' button on the remote right after you plug power into the SB3. It
should respond with programming