ovonrein;609349 Wrote:
> Awesome - upgrading did the trick. Thanks Toby.
No problem. Enjoy! :)
--
toby10
toby10's Profile: http://forums.slimdevices.com/member.php?userid=12553
View this thread: http://forums.slimdevi
Awesome - upgrading did the trick. Thanks Toby.
--
ovonrein
ovonrein's Profile: http://forums.slimdevices.com/member.php?userid=2130
View this thread: http://forums.slimdevices.com/showthread.php?t=85158
Right, you sold me the update of SBS real well ;) (Though aren't you a
little disingenuous perhaps? There's a f/w file somewhere in my SBS
tree which I suppose I could just delete, and that would put a stop to
it, too, no? Anyway, will update SBS.)
--
ovonrein
---
That's because your local SBS server is a different FW version than is
on MySB.com. Your options are:
1. update your SBS to 7.5.3, now they will be the same FW and no
updates needed when switching between SBS and MySB
2. don't switch between SBS and MySB
3. do switch between them and get annoy
OK, yes, there appears to be some problem here. If I press Brightness,
then MSB upgrades the f/w. The process takes its sweet time and I have
access to MSB, yippee. Alas, when I pick "Connect to Squeezebox Server"
to switch back to my LAN server, I immediately get "Press BRIGHTNESS to
upgrade s
Try holding the Brightness button when they connect to MySB.com.
--
toby10
toby10's Profile: http://forums.slimdevices.com/member.php?userid=12553
View this thread: http://forums.slimdevices.com/showthread.php?t=85158
___
I got the same problems that I have on my SB2 now also with my SB3. It
simply fails to login to MSB - screen just goes blank. Any pointers as
to where to start debugging? The only way I can get the SB2 and SB3
back is by pulling the power and then interrupting the start-up to stop
it from attem
toby10;606121 Wrote:
> I'd try connecting it to SBS server on a computer, let it update it's FWWorth
> a shot. Pulling down new f/w is certainly the first thing the SB3
did when I connected it to MSB.
--
ovonrein
ovonre
Try deleting the SB2 from MSB.com & doing a factory reset (power on
while holding down Add on remote) then try again.
I have an SB2 currently connected to MSB.com without issue but then it
is the same internals as an SB3 AFAIK.
--
rbz5416
---
I wonder if your old SB2 is trying to connect to a very old
SqueezeNetwork IP address?
I'd try connecting it to SBS server on a computer, let it update it's
FW, see if it will register on MySB.com via SBS, try some internet
stations.
Now try switching it to MySB.com and see if it connects.
Dunno,
I returned an old SB2 to active service recently, trying - without much
joy - to make it connect to mySqueezebox.com. I just verified that it
should work in principle, that I have indeed got the correct password -
and it is all good on my SB3. But the SB2 does not get past the point
of "I alread
11 matches
Mail list logo