I have a wired only SB2 and the mini-PCI slot has not been soldered to
the processor board so would be unable to upgrade. I'd always open the
thing up to check before buying a card.
Chris
--
lostboy
lostboy's Profile:
I purchased my SB3 as wired-only, but it does have the mini-pci slot
on the board.
pete
--
widman
widman's Profile: http://forums.slimdevices.com/member.php?userid=8695
View this thread:
I too had no idea there was a wired one till i tried to connect
wirelessly!
i wasn't too fussed as i have just rewired the house and put what i
thought was sufficient cat5 in but i'm having difficulty relocating my
cable modem which is requiring me to use 1 of my ethernet ports in the
living
You could consider the use of an access point that support the client
mode.
Example: EDIMAX EW-7416APn
Probably it will not work out of the box, but you could configure it
with a windows pc (and squeezeplay on top).
--
boxowl
Based on this thread:
http://forums.slimdevices.com/showthread.php?t=34878highlight=sb3+wireless+card
I think you want this card:
http://www.amazon.com/HQRP-Wireless-802-11g-Adapter-MousePad/dp/B000OQ9EPC
Hope this helps
--
widman
hardflipman - you can run two separate network connections over a single
piece of CAT5/6. Only two pairs are used for twisted pair ethernet, and
there are four pairs in CAT5/6.
There are simple dongles that convert one-to-two (you'd need one for
each end, or you can do it with a pair of punch
Are you sure you can upgrade the SB3 to wireless?
I have a wired only SB3 in searching on this forum I was lead to
believe by a fairly convincing post that the SB2 wired only units had
the mini-pci slot, but the SB3's did not.
I've not opened mine up to find out since it's sitting next to a
i got a SB3 recently and found out to my dismay that it was wired. is
there a way to upgrade it to wireless?
cheers
--
hardflipman
hardflipman's Profile: http://forums.slimdevices.com/member.php?userid=21603
View this
hardflipman;412369 Wrote:
i got a SB3 recently and found out to my dismay that it was wired. is
there a way to upgrade it to wireless?
cheers
I don't think they made an SB3 without a wireless card in it.
You sure it's an SB3? Not an SB1 or SB2 or other?
Have you tried resetting it and
I saw it on an auction site, about two years ago.
--
r808a
r808a's Profile: http://forums.slimdevices.com/member.php?userid=29205
View this thread: http://forums.slimdevices.com/showthread.php?t=62072
SB3s used to be sold in wired or wired wireless versions. I have one
of each.
--
TonyM
TonyM's Profile: http://forums.slimdevices.com/member.php?userid=8354
View this thread:
The hardware should be there (mini-PCI slot) and the firmware should
support it as there is only one version of the firmware.
The tricky part will be finding the exact wireless card. You have to
find the exact one, and IIRC it's an Asian OEM that only sells to
corporations. The model number
TonyM;412394 Wrote:
SB3s used to be sold in wired or wired wireless versions. I have one
of each.
Well I'll be. I had never heard that before. Thanks. :)
--
toby10
toby10's Profile:
Mark Lanctot;412403 Wrote:
It would probably be easier and even cheaper to wire it to a wireless
bridge.
I expect Mark's right about this. Another alternative would be to bring
the wire to where you're using the SB3. If you don't want to pull
ethernet cable to that location, you could look
14 matches
Mail list logo