The Q3 component is a thyristor. I replaced it, but still have no
display.
Given that I have a totally dead display, I'm not sure it's worth the
effort to re-cap this board.
beels's Profile: http://forums.slimdevices.com
Thanks phillipe. That would be really nice if you could get some Q2
measurements. Then maybe I can see if I need to order that part as
well.
beels's Profile: http://forums.slimdevices.com/member.php?userid=10980
View thi
Well, philippe, I think you have inspired me to re-cap board. Thanks so
much for the part numbers! It would've taken me a long time to get all
the part numbers, and I might have made errors. I went through your
list and noticed that you didn't mention the 2 through-hole caps. Do
you replace t
Philippe,
Have you ever had a SB with the condition of an uncontrollable scrolling
display that regressed to a dead display, like mine? And if so were you
able to fix it with a re-cap? Are you talking only about the
electrolytics - like about only 25 capacitors? Or did you do ALL caps?
Have
I checked all the larger e-caps (in-circuit) with an ESR tester and
found five of interest:
These two are almost certainly bad, however, they are apparently related
to the audio, so not implicated in my primary "dead/no display" issue:
C16 - 3.68 uF, ESR > 40 ohm
C20 - 4.25 uF, ESR > 40 ohm
Th
Yes, I tried the Xlinx reset and the other ones you listed. Dead.
Thanks for the suggestion though.
On another thread, I found some voltage check points I was able to pass.
And it seems like the 5V voltage regulator is working.
I'm going to use an ESR meter to do some capacitor testing. I'd l
Thanks for the response.
Oh yeah, I forgot to add that I did try it without the WiFi card
installed. Dead.
Also, before I got the replacement PSU, I tried some other PSUs, so
maybe I fried some voltage controller or something.
--
My Classic v3 recently started scrolling uncontrollably (push up or down
arrow once, and display continues to scroll). Now it is DOA except for
a faint glow of the Toslink jack. I tried a new power supply; no
improvement.
Are there some obvious troubleshooting steps I could try?
I got my problem fixed by doing an uninstall of 6.5.2 (which I had
installed over 6.5.1 in an attempt to fix the artist name display
issue), then did a clean install of the April 5 release 6.5.2 nightly
build.
So I now can see the artist names again.
Thank you!
--
beels
Play, however, the artist name disappears.
--
beels
beels's Profile: http://forums.slimdevices.com/member.php?userid=10980
View this thread: http://forums.slimdevices.com/showthread.p
ems like a SlimServer issue. Has anyone seen this before? Any
thoughts?
--
beels
beels's Profile: http://forums.slimdevices.com/member.php?userid=10980
View this thread: http://forums.slimdevices.com/showthr
11 matches
Mail list logo