I ordered the parts and built a picoreplayer with touchscreen. It works
great, no problems, and supports 192 kHz/24-bit via HDMI...
Thanks for the help and suggestions everyone!
DLloyd's Profile:
DLloyd wrote:
> Hi Philippe,
> Thanks for getting back to me. Yes, we did try to fix the Onkyo. The
> biggest problem is that if you put the unit into standby mode it does
> not reconnect to LMS.
> Since the recent firmware update it fails to play complete tracks and
> stops playing when there
philippe_44 wrote:
> And did we try to fix the Onkyo in upnp mode?
Hi Philippe,
Thanks for getting back to me. Yes, we did try to fix the Onkyo. The
biggest problem is that if you put the unit into standby mode it does
not reconnect to LMS.
Since the recent firmware update it fails to play
DLloyd wrote:
> Thanks for the suggestion. Will this support 192 kHz/24-bit via HDMI?
I think so, but you should ask over at the official thread:
https://forums.slimdevices.com/showthread.php?111787-ANNOUNCE-piCorePlayer-6-0-0/
Apesbrain wrote:
> Raspberry Pi running piCorePlayer connected to Onkyo via HDMI or USB.
> An RPi A+*, case, power supply, microSD card, and cable will cost about
> $50.
>
> *RPi 4 or 3B+ if you need ethernet; will cost a little more.
Thanks for the suggestion. Will this support 192
Raspberry Pi running piCorePlayer connected to Onkyo via HDMI or USB.
An RPi A+, case, power supply, microSD card, and cable will cost about
$50.
Apesbrain's Profile: http://forums.slimdevices.com/member.php?userid=738
philippe_44 wrote:
> And did we try to fix the Onkyo in upnp mode?
I have a number of bits of network enabled hifi kit. One with only upnp,
one with airplay and upnp and finally a recently acquired Onkyo AVR that
has Airplay, upnp and chromecast.
Each of them has an SB player/Pi plugged in to
It will be downconverted automatically but I assume you are concerned by
that (as a signal processing engineer I think you should not but thatÂ’s
beyond the point here :-)
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne,
philippe_44 wrote:
> Why not using AirPlay mode?
Because I have files which are 192 kHz, AirPlay is 96 kHz max.
DLloyd's Profile: http://forums.slimdevices.com/member.php?userid=9063
View this thread:
DLloyd wrote:
> Hello,
>
> A while ago my Squeezebox bit the dust and I replaced it with an Onkyo
> TX-8270 receiver. I have had a lot of problems with the Onkyo connecting
> to LMS via DLNA. Most recently a firmware upgrade "broke" the receiver
> as it will no longer stream complete tracks
I have an older model (1030) and it is used as a player with LMS around
once a week ... but we use it as an AirPlay receiver rather than
UPnP-AV.
Usually it is used here to play a radio station that is set as a
Favourite - with the selection done from Pi touchscreen.
Paul Webster
DLloyd wrote:
> Hello,
>
> A while ago my Squeezebox bit the dust and I replaced it with an Onkyo
> TX-8270 receiver. I have had a lot of problems with the Onkyo connecting
> to LMS via DLNA. Most recently a firmware upgrade "broke" the receiver
> as it will no longer stream complete tracks
Hello,
A while ago my Squeezebox bit the dust and I replaced it with an Onkyo
TX-8270 receiver. I have had a lot of problems with the Onkyo connecting
to LMMS via DLNA. Most recently a firmware upgrade "broke" the receiver
as it will no longer stream complete tracks from LMS, just the beginning
13 matches
Mail list logo
