Re: [Discuss-gnuradio] FFSK/MSK Demodulation in Gnuradio

On Tue, Dec 01, 2015 at 02:14:59PM +0100, Michael Kramer wrote: > > I have the following problem. I've got a signal and I know it's FFSK > modulated with a bitrate of 2400. I've tried to read some tutorials or > find other information about FFSK (which is the same as MSK > apparently), but I found

[Discuss-gnuradio] Schedule for GNU Radio 3.7.9 release - abi-compliance-checker

Hi, I played a bit with the abi-compliance-checker which resulted in the attached patch. Alas, it complained a bit on gr-uhd - perhaps unable to figure out uhd from the Ettus UHD headers and uhd from gnuradio headers. So I punted, and told abi-compliance-checker to skip include/gnuradio/uhd

Re: [Discuss-gnuradio] HELP!!! USRPN210+GNURADIO

Like one year ago I was testing with USRP N210 with the blocks attached to this message. Note that one is for transmission and the other one for reception. I am lucky and I got 2 USRP N210, so I was able to send a tone (one sin function or the add of two sin functions) and receive it correctly.

[Discuss-gnuradio] uhd_sink samp rate(sps)

hello when i set the uhd_sink or uhd_source samp rate to 10M i got that The hardware does not support the requested TX sample rate: Target sample rate:10.00 MSps Actual sample rate: 8.00 MSps then i set it to other value,some of them is ok,some not, i know that the max samp rate of

Re: [Discuss-gnuradio] uhd_sink samp rate(sps)

Hi Ekko, The sample rate has to be some fraction of the clock rate divided by an integer. The clock rate on the E310 defaults to 32MHz I believe, so 32MHz divided by 4 gives you 8 Msps. The system will get you as close as it can to the desired sample rate. You can set the clock rate to something

Re: [Discuss-gnuradio] TETRA demodulator advices

On Fri, Nov 27, 2015 at 11:54 AM, Timothée COCAULT < timothee.coca...@gmail.com> wrote: > Hi, > > I am writing a TETRA demodulator with GNU Radio Companion without any OOT > block. > > My flowgraph works but as I don't have a signal processing background, I'm > not really sure that my choice of

Re: [Discuss-gnuradio] Asynchronous source with zeros in between

On Mon, Nov 30, 2015 at 2:37 PM, Francisco Albani < francisco.alb...@gmail.com> wrote: > Hi to all. > > (this email subject may be inaccurate) > > I need a block with the following characteristics: > > * Input port for messages. > * Output port for complex/float/byte/etc. stream. > * Forecast

[Discuss-gnuradio] HELP!!! USRPN210+GNURADIO

Hello everybody I just start working on USRP with Gnu radio. In last two weeks I was looking for tutorial to test my USRP without programming any blocks. The only tutorial I found is an FM receiver, but unfortunately frequency range of USRPN210 is way much bigger than FM frequencies (400MHZ-to

Re: [Discuss-gnuradio] RFNoc and data rates

Hi Sylvain, Sorry for reviving a relatively old issue. I see that you mentioned some tweaking to be done on the fft block when the signal are weak. I'm currently working on an application using this RFNoc blocks and I'm having that problem: I'm calculating the power received at my radio and below

Re: [Discuss-gnuradio] QT Time Raster in OSX 10.10.4 Not Rastering

On Wed, Nov 25, 2015 at 1:05 PM, Paul Garver wrote: > Tom, > > Thanks for the info. I could see a reimplementation as a good project for > some CS undergrads here at GT. Is there a particular way the QT time raster > should be rewritten (e.g. using particular libraries, QT