On 03/16/2018 09:33 AM, guillaume.toc...@orange.com wrote:
> Hello all,
>
> I want to make a flow graph for transmitting and receiving OFDM
> modulated data. To be precise, I want to do a LTE-M "like"
> transmission/reception, so I am trying to transmit data with a BW of
> 1.08 MHz OFDM.
> To do
On 03/23/2018 11:26 AM, Müller, Marcus (CEL) wrote:
> Hi Suraj,
>
> thank you very much for sending us your proposal! This already looks
> very nice. Can I wish for you to add something like a rough block
> diagram that describes how your simulated illuminator, your signal
> recoverer, your
Sakshi,
your proposal does also not meet the formal requirements. Please take a
look at the GNU Radio wiki pages on GSoC.
Thanks,
Martin
On 03/23/2018 02:42 AM, Felix Wunsch wrote:
> Hello Sakshi,
>
> great to hear that you are interested in improving the filter design tool!
>
> Your
Valian,
based on your original email, I wasn't entirely sure if this was even an
expression of interest in GSoC. A compass widget would be good, but like
Nicolas says, it's not really enough for a project.
-- Martin
On 03/20/2018 03:48 AM, Nicolas Cuervo wrote:
> Hello Valian,
>
> Thank you
On 03/19/2018 12:03 PM, swapnil negi wrote:
> Hello everyone!
> I have uploaded my proposal to the GitHub pages. So, please review and
> provide me suggestions to improve the same.
> Proposal Link: https://swap-nil7.github.io/gsoc-proposal.pdf
> Code Link:
Hi Suraj,
thank you very much for sending us your proposal! This already looks
very nice.
Can I wish for you to add something like a rough block diagram that
describes how your simulated illuminator, your signal recoverer, your
radar estimator and your clutter reducer work together, and which
Can you elaborate on what kind of signal you're sending, and what kind
of synchronization you need?
Synchronization exist for carrier frequency, symbol rates, timing
offsets, phase and packets, to name the lowest-level forms of
synchronization.
How synchronization is done usually depends on the
Hi Harshit,
I read your proposal and I have quite a few suggestions for improvement.
General remarks
Your references must be updated. They do not point to the actual sources
but some general landing page. Also, I found at least one reference that
points to an incorrect source.
Introduction
Hello Sakshi,
great to hear that you are interested in improving the filter design tool!
Your proposal, however, still needs some work. Please read the
guidelines carefully, we have a list of specific information we need
from you without which we can't consider your proposal.
About your
Hello everyone,
The link was pointing to an older version. I have fixed the link. I need
some feedback on my proposal [0].
Some queries:
What exactly should I include in 'Implementation'? I have put generic
decoder code and sample code for optimal implementation of FEC codes
(specifically LDPC).
Hello Everyone,
I am Suraj Hanchinal, a second year undergraduate in Electrical Engineering
at the Indian Institute of Technology, Kanpur. I had approached the mailing
list and communicated with Martin Braun, the mentor and others regarding
the gr-radar toolbox extension idea. I decided to work on
Hi guysI want to ask something about synchronizationI am researching about beamforming so I use 2 usrps as transmitters and I use one usrp as a receiverI can check they send signals and it receives signalsbut I need to synchronize Rx with Tx to check the change of amplitude in received signalAre
Hello Everyone,
This is Sakshi Agrawal, Graduated in Electronics Engineering. I have been
following DSP industries. A few days back I ran into GSoC programme. I have
seen some GSoC projects proposed by GNU radio in filter design. Having
proper coding knowledge and strong DSP background from my
13 matches
Mail list logo
