On 10/05/2014 04:25 AM, Gisle Vanem wrote:
Since my previous message seems to be ignored, here is something simpler
for you to comment on.
In gr-blocks/lib/stream_pdu_base.cc, the read() and write() functions
are used on sockets. This doesn't work well on Windows as you're
probably aware.
On 01/27/2014 11:19 PM, Marco Bosco wrote:
Hi all!
I have a simple flowgraph: a signal source, a throttle and a
waterfall plot. I'd like to change the frequency of the signal source
during runtime using the output of a python script. The output of the
python script is time-varying, then I
On 12/07/2013 12:30 AM, John Blommers wrote:
In gnuradio-companion, from time to time, it becomes necessary to
copy and paste the parameters from one block to another block’s
In case this helps: you can copy and paste blocks in the flowgraph
editor, and all parameters will be duplicated into
On 12/05/2013 12:41 PM, Aylons Hazzud wrote:
I have been experimenting with the stream selector in gnuradio
companion, but am stuck in situation.
First, how do I change a variable after N samples? I want the signal
to switch from a filter to another at a fixed rate, but blks2.selector
On 10/29/2013 07:22 PM, Louis Brown wrote:
Any ideas as to why cmake is not finding the CL libraries on my
machine; Fedora 19 x64?
Could NOT find OpenCL (missing: OPENCL_LIBRARIES)
CMake Error at CMakeLists.txt:104 (message):
OpenCL required to compile gr-fosphor
I have added the
On 10/13/2013 09:01 AM, Marcus Müller wrote:
Hello folks,
I remembered there was a discussion on the IRC channel during gr-con '13
about GR needing usable logos.
I happened to just had reproduced an original version of the logo for
sticker printing, and promised to share those files.
may not be
propagating tags. Which would explain the missing tags :-)
-josh
2013/9/5 Josh Blum j...@ettus.com:
On 09/03/2013 12:41 AM, Harry Zhang wrote:
Hi,
I'm trying to get rx time tags in narrowband Benchmark_tx/rx with a
modified digital_correlate_access_code.cc
On 09/05/2013 02:12 AM, Nemanja Savic wrote:
HI all guys,
I have 3 different packet deframers, and now I would like them to be able
to send a message to a certain block about correct packet reception. In
order to do that I want to make some phantom block that will have message
out port.
On 08/29/2013 07:27 PM, Francois Quitin wrote:
Had no response to my previous email, so I try to give it another shot:
Hi all,
I'd like to know if it's possible to read the GPSDO data (more specifically
the GPS time) with GNURadio-companion. I understand there are simple
commands
On 09/03/2013 12:41 AM, Harry Zhang wrote:
Hi,
I'm trying to get rx time tags in narrowband Benchmark_tx/rx with a
modified digital_correlate_access_code.cc. But the
get_tags_in_range(rx_time_tags,0,this-nitems_read(0)+i,this-nitems_read(0)+i+1,pmt::pmt_string_to_symbol(rx_time))
method
On 08/07/2013 04:32 PM, jrobison wrote:
I am trying to generate java interfaces for SWIG (2.0.10) under fedora 19 ,
but I'm getting an error. I've been using the command
swig -java -c++ -I$SWIG_INCLUDE $SWIG_INCLUDE/vocoder_cvsd_decode_bs.i
This returns the error:
, or is this not an
issue?
gr-osmosdr, gqrx and similar stuff comes in my mind...
Ralph.
-Original Message-
From: discuss-gnuradio-bounces+ralph=schmid@gnu.org
[mailto:discuss-gnuradio-bounces+ralph=schmid@gnu.org] On Behalf
Of Josh Blum
Sent: Wednesday, August 07, 2013 2:55 AM
[mailto:discuss-gnuradio-bounces+ralph=schmid@gnu.org] On Behalf Of
Josh Blum
Sent: Wednesday, August 07, 2013 2:55 AM
To: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] Cannot import gnuradio.extras after
reinstall
the latest gnuradio
ImportError: libgnuradio-extras.so: cannot
On 08/06/2013 11:59 AM, Alex Zhang wrote:
Hello,
When run the make, i got error today:
/home/alexzh/gras/lib/jit_factory.cpp:88:8: error: ‘llvm’ does not name a
type
/home/alexzh/gras/lib/jit_factory.cpp:238:6: error: ‘Factory’ has not been
declared
make[2]: ***
ImportError: libgnuradio-extras.so: cannot open shared object file: No such
file or directory
I run the sudo ldconfig after the whole installation, but the error still
exists.
Btw, do I need to install the GRAS manually?
If you want grextras installed to support precog or perhaps an
On 08/04/2013 06:08 AM, Marcus Müller wrote:
I can't really test this right now,
but you could insert
%include cdata.i
into your project's swig file[1]; this should generate a python method
cdata(ptr, length)
that you can feed your blob_data() to. I'm not quite sure that WILL
work as
On 07/29/2013 08:37 AM, macbany wrote:
I'm using GnuRadio 3.6.5.1 and I wanted to create a block similar to
stream-to-streams for messages. In the XML I used a variable and nports so I
could specify the number of ports in the flowgraph. However, I've found that
this does not work. Whenever I
Hello list,
As a follow-up to my last announcement Advanced scheduler pw0ns SWIG
for you (which I was quite excited about), I have since tried to
formalize the feature-set and document it:
What I am collectively calling the block factory is really:
* A CMake utility to build and install runtime
On 08/02/2013 06:32 AM, Marcus Müller wrote:
Hi Harry Zhang,
UHD in general not related to GRAS.
I don't know either a UHD control nor a status block. Are you referring
to the UHD USRP source/sink blocks?
However, if you're trying to use any UHD related functionality, you will
need to
I havent seen this before, but you might try explicitly linking the tags
demo against boost libraries, like so:
diff --git a/gr-uhd/examples/c++/CMakeLists.txt
b/gr-uhd/examples/c++/CMakeLists.txt
index 655ef0c..18f6839 100644
--- a/gr-uhd/examples/c++/CMakeLists.txt
+++
On 07/29/2013 07:31 AM, Manoj Gudi wrote:
That sounds good.
I second that. Just ifdef the pause for the fix.
For a little extra information here. The thread pools in Theron can have
different yield strategies. GRAS happens to use by default the condition
variable strategy. So the code in
On 07/26/2013 07:57 AM, Manoj Gudi wrote:
We've been successful in building dependencies for gnuradio on armv7
platform, however while building GRAS, we got this error:
This line is probably the culprit.
On 07/24/2013 12:46 PM, Nemanja Savic wrote:
After some time I maybe realized how this thing works, but I don't know jow
to call correctly methods from dboard_iface:
def get_pin_ctrl(self, *args, **kwargs):
get_pin_ctrl(self, unit_t unit) - boost::uint16_t
return
On 07/24/2013 08:25 PM, yeran wrote:
Hi all,
I am trying to study STBC using USRP2 and have some questions about how to
use mimo cable.
I followed the instruction on ettus but i dont understand 'Configuring the
slave' part
On 07/25/2013 04:51 AM, Gong Zhang wrote:
Hi,
I got the source code of gras using git,and I followed the instruction
to install gras.But I got errors while making.
/home/zg/Desktop/Codes/gras/gras/Theron/Include/External/boost/atomic/detail/gcc-x86.hpp:
In function ‘void
ubuntu like 12.04 --
which is the most recent long term support version.
-josh
2013/7/25 Josh Blum j...@joshknows.com:
On 07/25/2013 04:51 AM, Gong Zhang wrote:
Hi,
I got the source code of gras using git,and I followed the instruction
to install gras.But I got errors while making.
/home/zg
On 07/15/2013 05:43 PM, devin.butterfi...@gmail.com wrote:
Hi,
I'm using gras for my application and my custom block needs to be
able to do a blocking read to get data from an external source. With
the standard scheduler I used a non blocking read in a polling loop
with an interruptable
On 07/14/2013 02:43 PM, Devin Butterfield wrote:
Hi folks,
I just started experimenting with GRAS and ran into this:
GRAS: The debug asserts are enabled.
Created default thread pool with 4 threads.
Traceback (most recent call last):
File top_block.py, line 80, in module
On 07/11/2013 02:10 PM, tom sutherland wrote:
I have a simple 16QAM project. I want to do audio but for right now I
have a signal source constant input to the QAM module. I am trying to
display the constellation diagram but it's not displaying what I think
it should. I have a few
On 07/10/2013 11:30 AM, Weigel, Sebastian wrote:
Hi GNURadio-Community,
I tried to install GNU-Radio 3.7 on Ubuntu 13.04. After getting all the
dependencies with the instructions from
http://gnuradio.org/redmine/projects/gnuradio/wiki/UbuntuInstall cmake
worked,
but when I tried make
The thing is, you don't want your streaming ports to have cycles. It's
not a fundamental limitation of GNU Radio; it's just not the right
thing to do. The streaming ports are for streams of data, which tend
to have strong temporal relationships with each other.
I think Tommy needs to
University of Virginia
Phone: 913-775-2241
On Jul 9, 2013, at 5:46 PM, Josh Blum j...@joshknows.com wrote:
On 07/09/2013 08:25 PM, Johnathan Corgan wrote:
On 07/09/2013 05:06 PM, Tommy Tracy II wrote:
I am working on a GNU Radio Router block that will serve as a
communication block
On 07/09/2013 08:25 PM, Johnathan Corgan wrote:
On 07/09/2013 05:06 PM, Tommy Tracy II wrote:
I am working on a GNU Radio Router block that will serve as a
communication block between multiple flow graphs. My router will
receive information via TCP, and then send it to several other
Well, I was attempting to rewrite the property interface to make it a
little more generic... and I accidentally obviated the need for SWIG.
-- Interesting... go on...
OK, say you are a user, you are making a nice fast c++ block, and you
intend to use it in python. This is like the most common GR
...
UHD Warning:
The hardware does not support the requested RX frequency:
Target frequency: 33.00 MHz
Actual frequency: -31.00 MHz
-- Opening a USRP1 device...
-- Using FPGA clock rate of 64.00MHz...
U
Done
On Thu, Jul 4, 2013 at 6:36 AM, Josh Blum j
, BasicTX. RXA is
connected to TXA and RXB is connected to TXB. Attached is a GRC flow
graph. Hope that helps.
-josh
On Sat, Jun 29, 2013 at 11:24 AM, Josh Blum j...@joshknows.com wrote:
On 06/27/2013 09:44 AM, Karan Talasila wrote:
Hi,
I am using a basic tx and basic rx daughterboard
On 06/30/2013 10:45 AM, Mohammed Karmoose wrote:
Dear All,
I intend on implementing cooperative beamforming techniques using USRPs
(two USRPs send precoded versions of the same symbols to null out
transmission at certain directions). I need the two USRPs to be almost
perfectly
Longer term, the plan is to add scheduler provided functions to call so
block work() functions can ask the scheduler to call me again when this
happens and the scheduler can handle the blocking/response in a way the
gets along with everything else.
TL;DR We're working on it :)
This
On 06/28/2013 12:29 PM, Jay Prakash wrote:
I have 4 N210 USRP accessible via switch.
Though it use to come sometime but today even uhd_find_devices gives the
same error!
Same error different packets.
What is your network configuration like? Is this part of the main office
network/or
On 06/27/2013 09:44 AM, Karan Talasila wrote:
Hi,
I am using a basic tx and basic rx daughterboard for transmission and
reception. The spec says basic tx and basic rx run from 0 to 250 MHz. But
when i run transmitter and check the uhd_fft at receiver, after 32 Mhz,
there is no signal.
On 06/24/2013 03:58 AM, Gong Zhang wrote:
Josh,
I'm curious about how it tune the LO in USRP. Does it control the LO
via
'post_msg(CTRL_PORT,pmt.pmt_string_to_symbol('usrp_sink.set_center_freq')'?
Thanks.
Well, current pre-cog uses the v3.6 gr-extras out of tree message
passing
On 06/22/2013 08:46 AM, Manu T S wrote:
I am trying to write code for a block which accepts a vector input and
spits out a vector output. The block is derived from gr_sync_block.
From the tutorial on
On 06/22/2013 06:31 PM, Chris Adie wrote:
I can install gnuradio fine from the Mint repository - it works, but it is
version 3.6.1. I want to use the rtlsdr stuff, so I need at least version
3.6.4.
So, I de-installed 3.6.1 and used the build-gradio script to install
version 3.6.5. The
On 06/21/2013 04:35 AM, Les Barker wrote:
Hi All
I have built gnuradio from the s.b.r.a.c link without any errors.
When using GR Companion there are only 2 items under WX GUI Widgets i.e. Plot
Sink and WX DOA Compass. The waterfall sink and FFT sink, together with many
others, are not
On 06/21/2013 09:41 AM, Tim Newman wrote:
Yes, bringing this back up. Back to the original topic. When I get this
FIFO ctrl error, the host is sending back an icmp port unreachable msg to
the usrp, I grab this using wireshark.
Well if the app shutdown from the error. That could be the
On 06/21/2013 07:02 AM, stefosee wrote:
Hi,
i'm trying to create my first hier block following these rules:
http://gnuradio.org/redmine/projects/gnuradio/wiki/GNURadioCompanion#Hierarchical-Blocks
but when i'm going to generate the flow graph, i get the error message:
Generate Error:
On 06/21/2013 01:59 PM, stefosee wrote:
http://gnuradio.4.n7.nabble.com/file/n42181/screenshot.png
Can you try using an all ASCII path for the grc file? I think the XML
parser may be having trouble w/ the characters in the file path.
-josh
--
View this message in context:
On 06/21/2013 04:10 PM, Jay Prakash wrote:
I am using Ubuntu 11.10.
Though I installed Gnu Radio on two systems using same script, it's not
working on new system!
wget http://www.sbrac.org/files/build-gnuradio chmod a+x
./build-gnuradio ./build-gnuradio
..
.
.
checking for library
On 06/21/2013 07:25 PM, Arturo Rinaldi wrote:
Hi folks, I've recently bumped into an issue with two GRC flow graphs
while running a rx/tx loop path interfacing with an external sensor :
*T**X path - UHD Usrp1 Sink (sending data to the sensor)*
If it helps, the packet framer actually inputs bytes, not bits. So thats
8 bits of information per byte. So rather than 1/0, you have 0-255 as
possibilities. -- not sure if that effects your experiment, just FYI
-josh
On 06/19/2013 12:28 PM, Jay Prakash wrote:
Most of the times I get:-
On 06/19/2013 08:57 AM, Marcus D. Leech wrote:
On 06/19/2013 02:22 AM, Favati wrote:
Il 15/06/2013 13:02, Tanaga Biru ha scritto:
Dear Helper,
I had installed GNU Radio, but when I run gnuradio-companion in Ubuntu
Terminal, I received the following message:
*Cannot import gnuradio.*
Following up on a comment Josh made in the earlier discussion about GRCC, I
tried to pull out all of the GUI references that the GRCC tool depends on,
but I still ended up with an enigmatic error in the end. Unfortunately,
this was done two weeks ago and I don't have any good info on where
On 06/17/2013 05:13 PM, Ankan Roybardhan wrote:
How do I test full duplex capability on gnuradio usrp N200 sbx
daughterboard??
Open gnuradio-companion and instantiate a USRP source and a USRP sink
block in the same flowgraph.
-josh
-Regads,
Ankan Roybardhan.
On 06/16/2013 02:13 PM, Adeel Anwar wrote:
so i checked the new grextras wiki it has uhd_control block i guess that
can be used for this job.
uhd_control block supports only a subset of usrp-functions (exposed
through gr-uhd) e.g. set_command_time, set/get_gain/freq etc BUT
currently it
On 06/16/2013 10:44 PM, Josh Blum wrote:
On 06/16/2013 02:13 PM, Adeel Anwar wrote:
so i checked the new grextras wiki it has uhd_control block i guess that
can be used for this job.
uhd_control block supports only a subset of usrp-functions (exposed
through gr-uhd) e.g
On 06/14/2013 10:21 PM, Yogesh Dahiya wrote:
sorry for last post it accidentally got posted
so i have work function which has infinite loop
while(1):
#some work
if condition
do some more work
now when this block get turn every thing is stuck on this block, other
blocks
On 06/14/2013 07:41 AM, Yogesh Dahiya wrote:
Am i getting this right
With gr.block, each block has bunch of stream ports (vectorvector
ins,vectorvector outs) and some message port(which we use to specify
earlier in signature and there numbering use to start after stream ports )
With
I am especially interested in gr-extras, what seems to be a part of gras
now. Will this be available for gnuradio 3.7 standalone, or just as part of
gras? I do not like the idea of gras hovering over gnuradio, but like much
more an independent gnuradio installation in its standard folder,
On 06/13/2013 01:23 PM, Adriana Arteaga wrote:
Hi!
I'm using an udp_sink block to send the power values (float) to an common udp
socket writing with python
data, addr = sock.recvfrom(2048)
but the outup was:
����ٶ��e�¹�¢���\d�5�S���8�®Z��xS�����A����T�
I found data
Well, in the dtd, value should be before type
!ELEMENT param (name, key, value?, type, hide?, option*)
On 06/13/2013 08:15 PM, Marcus D. Leech wrote:
Here's the XML:
?xml version=1.0?
block
nameOblivious Slicer/name
keyra_blocks_slicer/key
categoryRA Blocks/category
importimport
On 06/13/2013 09:20 PM, Jay Prakash wrote:
While doing cmake for installing Gras it gives: -
*Using install prefix: /usr/local*
*CMake Error at gnuradio/CMakeLists.txt:245 (GR_LOGGING):*
* Unknown CMake command GR_LOGGING.*
I got gnuradio in gras directory from git clone
On 06/13/2013 09:34 PM, Yogesh Dahiya wrote:
I have written this simple_arq block which sends a packet wait for ack
before sending other. I have created a hier block for physical layer (I
have tested the physical layer its working) but the mac block is not
receiving.
Why is it so that when
Jay Prakash
Senior Undergraduate
Electronics Engineering
IIT (BHU)
VARANASI
+91-9559475258
http://about.me/jay.prakash/
http://www.linkedin.com/profile/view?id=91120191trk=hb_tab_pro_top
On Fri, Jun 14, 2013 at 7:00 AM, Josh Blum j...@joshknows.com wrote:
On 06/13/2013 09:20 PM
at 7:24 AM, Josh Blum j...@joshknows.com wrote:
On 06/13/2013 09:46 PM, Jay Prakash wrote:
I followed same as given on the gras wiki you suggested.
only problem now is gnuradio cloning.
Which git repo of gnuradio should I clone for successfully making gras?
You dont have to do anything
On Fri, Jun 14, 2013 at 7:42 AM, Josh Blum j...@joshknows.com wrote:
git submodule update
Jay Prakash
Senior Undergraduate
Electronics Engineering
IIT (BHU)
VARANASI
+91-9559475258
http://about.me/jay.prakash/
http://www.linkedin.com/profile/view?id=91120191trk=hb_tab_pro_top
http://about.me/jay.prakash/
http://www.linkedin.com/profile/view?id=91120191trk=hb_tab_pro_top
On Fri, Jun 14, 2013 at 7:58 AM, Josh Blum j...@joshknows.com wrote:
On 06/13/2013 10:20 PM, Jay Prakash wrote:
Here it is:-
spclab@spclab-GT701AA-ACJ-SR5250IL:~/Desktop/summer_/test$ git
On 06/14/2013 01:02 AM, Yogesh Dahiya wrote:
when taking the len of input buffer (len[0]) it shows 0 but when i am
calling pop_input_msg(0) it return the msg object ?
So an input port can have 3 types of input buffers, messages, and tags.
Think of buffers as bulk data, tags are inline
On 06/11/2013 10:02 PM, Jay Prakash wrote:
I have installed the extras and precog as per wiki.
The gnuradio-comapnion extras blocks are working fine.
But when I try to run precog modules given there is error:-
Precog requires an older version of grextras on this branch:
On 06/12/2013 12:38 PM, Yogesh Dahiya wrote:
i guess some of the older features of grextras are missing in the new one
like the gr.block . gruel files pmt_blob, pmt_mgr, pmt_extras are also
missing.
The newer grextras is just blocks. The features mentioned went into the
advanced scheduler.
bit).
Frankly, I'm not sure which version of gnuradio this is, but I installed it
from http://gnuradio.org/git/gnuradio.git/ last week.
From: Josh Blum [hidden email]
To: [hidden email]
Sent: Tuesday, June 11, 2013 6:02 PM
Subject: Re: [Discuss
On 06/12/2013 06:54 PM, Marcus D. Leech wrote:
On 06/12/2013 06:52 PM, Jay Prakash wrote:
USRP N210
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
This error is usually
On 06/12/2013 07:14 PM, Jay Prakash wrote:
I am connecting it on LAN using D-Link router.
Is the dlink router have gigabit ethernet on all ports between USRP and
PC? Sorry to say I have never had good experiences with dlink products,
and that includes outside of the USRP realm. :-(
A lot
On 06/11/2013 02:19 AM, Ankan Roybardhan wrote:
1. I tried using vm bridged connection over NAT.. i assigned 192.168.10.1
and subnet 255.255.255.0 in the ubuntu network setting running on
vmplayer.. I am pretty much sure about the other USRP IP since.. i used
some other machine to do
On 06/11/2013 11:42 AM, Jay Prakash wrote:
Hi!
Today I reinstalled using gr-gras and gr-extra.
But now there is some volk problem.
UHD Warning:
Unable to set the thread priority. Performance may be negatively
affected.
Please see the general application notes in the manual for
On 06/11/2013 11:50 AM, Jay Prakash wrote:
Running GRC files give following error after re-installation and update
with gr-extras.
Using Volk machine: sse4_2_32_orc
The program 'python2.7' received an X Window System error.
This probably reflects a bug in the program.
The error was
On 06/11/2013 12:29 PM, Marcus D. Leech wrote:
On 06/11/2013 12:26 PM, Gonzalo Flores De La Parra wrote:
I just installed gnuradio 3.6.5 and every works perfect, i observe a
lot of new and useful blocks. Among that i can see grextras install on
my gnuradio source directory, but i can't see
On 06/11/2013 12:48 PM, Marcus D. Leech wrote:
On 06/11/2013 12:41 PM, Josh Blum wrote:
On 06/11/2013 11:50 AM, Jay Prakash wrote:
Running GRC files give following error after re-installation and update
with gr-extras.
Using Volk machine: sse4_2_32_orc
The program 'python2.7' received
On 06/11/2013 03:55 PM, Yogesh Dahiya wrote:
Thanks that kind of worked for me it showed the gui for a while but then it
stopped with following error :
GRAS: The debug asserts are enabled.
Created default thread pool with 4 threads.
Using Volk machine: sse4_2_32_orc
ASSERT FAIL
have ubuntu 11.10 32 bit system
output of the unit test is
Running 1 test case...
t0 1804958425
t1 2805093589
delta_time 1.00014
*** No errors detected
On Wed, Jun 12, 2013 at 1:38 AM, Josh Blum j...@joshknows.com wrote:
On 06/11/2013 03:55 PM, Yogesh Dahiya wrote:
Thanks that kind
time_now() = 122002822
_init_time = 1984664495
Well thats special, _init_time time_now...
One possible explanation is that on this version, CLOCK MONOTONIC has a
different monotonic count per thread. given that the tick count is also
pretty small, I suspect this is the case. But not on the
. The good news, I
think those tests are related.
Can you report the OS name version, 32/64 bit?
The version of gnuradio where the tests failed?
-josh
From: Josh Blum-2 [via GnuRadio] ml-node+s4n41904...@n7.nabble.com
To: Botany Dave sd_wirel...@yahoo.com
Sent
. The right casting seems to fix the issue.
-josh
On Wed, Jun 12, 2013 at 4:08 AM, Josh Blum j...@joshknows.com wrote:
time_now() = 122002822
_init_time = 1984664495
Well thats special, _init_time time_now...
One possible explanation is that on this version, CLOCK MONOTONIC has a
different
On 06/10/2013 09:43 AM, Sean Nowlan wrote:
Do late packets always get dropped by the USRP? What happens if its buffers
get filled up with samples, all of which are late?
The stream args have a policy parameter. Also, these args can be set
from a parameter in the USRP GRC blocks, as well as
Ok, makes sense. So lets say I scheduled 20 minutes of bursts (1 second
period with 50/50 duty cycle) and I started the flowgraph 10 minutes
late. With the next_burst policy, could I rely on the USRP to
dutifully drop all late bursts? Are the packets dropped in the Ethernet
buffer or does
Run volk/lib/test_all from the build dir
If a kernel fails, it will tell you which one, start commenting out its
implementations in the source dir volk/kernels/volk/volk_*.h until the
test works. We narrow down suspect implementation and fix.
-josh
On 06/10/2013 09:57 PM, Dave L wrote:
The CPU
On 06/08/2013 02:26 PM, Juha Vierinen wrote:
Hi,
I've recently been working with a coded CW radar system that just loops
over a fairly long IQ vector. It works all fine for a while, but after a
few days, the transmission timing has drifted away from where it should be.
I'm comparing the
On 06/08/2013 10:27 PM, Yogesh Dahiya wrote:
I am trying to build gras but stuck with following error:
-- Found SWIG: /usr/bin/swig (found version 1.3.40)
-- Found PythonLibs: /usr/lib/libpython2.7.so
CMake Error at python/gras/CMakeLists.txt:9 (include):
include could not find load
Those files should be in ${GRAS_SOURCE_DIR}/PMC/cmake/Modules
Does that directory exist for you? Did you follow the build
instructions, the submodule commands are very important for fetching all
the code. Thats my guess:
On 06/06/2013 06:38 AM, Rickard wrote:
Hi gurus,
- Which is the simplest way, preferably directly in grc, to compactly
save 8bit I/Q data (sc8) from an UHD source to a file instead the of
the standard format complex float 32 (which is 4 times larger) ?
- Then also, how to convert
On 06/06/2013 02:54 PM, Arturo Rinaldi wrote:
I bumped into a strange issue in the past few days. When i launch GRC by
the desktop link generated, the program itself isn't aware of my custom
pythonpath set in the .bashrc settings file. I tried to modify the
desktop link also by checking the
On 06/04/2013 03:25 AM, Zan Li wrote:
Dear list,
Now I meet a problem about counting all the input samples. I hope I can
get some assistant from here. The problems are as follows,
In one of my blocks, I want to count all the consumed input samples to get
the timestamp of the received
200: import scipy
200: ImportError: No module named scipy
1/1 Test #200: qa_ofdm_txrx .***Failed0.42 sec
Wouldnt worry about it. I wonder if scipy is an intentional dependency
for the QA test though?
0% tests passed, 1 tests failed out of 1
Total Test time
On 06/03/2013 01:10 PM, ÀîÔÞ wrote:
Dear list, Now I meet a problem about counting all the input samples.
I hope I can get some assistant from here. The problems are as
follows, In one of my blocks, I want to count all the consumed input
samples to get the timestamp of the received packet. I
On 06/03/2013 12:26 PM, Monahan-Mitchell, Tim wrote:
I have testers that might not see the graphical version of the
flowgraph they are testing. To them, they run the flowgraph on the
command line, passing in various parameter values using the Short IDs
set up in the original flowgraph and
The above text would be entered someplace on the flowgraph in GRC,
like maybe the description field in the Options block. Then output of
that text to stdout is triggered by a selectable Short ID from a
parameter block on the flowgraph, or maybe is always hard coded to an
option like --help?
On 05/30/2013 11:31 PM, Marcus D. Leech wrote:
That I suspect will be hard to fix.
Its kind of random between releases of pygtk, but its basically known
behaviour. You need X to import gtk. Perhaps, the grcc could be modified
to import only the non gui python builder classes. I think the two
On 05/29/2013 02:31 PM, vegihat vegihat wrote:
hello, i want to write a simple energy detector without using c++, only
existence blocks and the numpy lib
So far, i have the following graph
usrp_source - head - stream_to_vector
could i read the values from stream_to_vector and write
On 05/29/2013 11:53 PM, Wolfgang Buesser wrote:
Hmm,
I don't think so:
What I apply to board A ADC0 shows up on scope0, and what I apply to board A
ADC1 shows up on scope1, so there are definitely two different ADCs involved.
Looking at the scope traces they are connected as set by the
Hey all,
The JIT Blocks in GrExtras just keep growing (now its a family):
https://github.com/guruofquality/grextras/wiki/Blocks#wiki-awesome-jit-blocks
* I mentioned the OpenCl block in a previous email:
https://github.com/guruofquality/grextras/wiki/Opencl
* There is now and ORC block as well.
On 05/28/2013 04:32 AM, Florian Schlembach wrote:
Perhaps it would work better to treat the input as one variable. Use a
tuple of numbers instead. You can make a text entry widget w/ converter
type Evaluate.
The callback would probably look more like this:
1 - 100 of 1943 matches
Mail list logo